一种改进AODV重路由算法在无线Mesh网络中的应用

本文在AODV路由协议的基础上提出了一种基于无环替代(LFA)的前摄性重路由机制,旨在提高无线Mesh网络的快速自愈的能力.文中首先介绍了AODV的改进AODV备份路由协议,并指出AODV备份路由协议的不足,然后提出了基于无环替代的AODV路由算法AODV-LFA,最后通过NS仿真实验,比较了AODV、AODV备份路由和AODV-LFA的丢包率、端到端时延等,表明AODV-LFA具有更强的自愈能力.     

AODV路由协议的改进算法

无线Ad hoc网络拓扑结构动态变化的特点,决定了路径断裂是不可避免的。路径断裂会引起源节点路由重建,源节点频繁地发起路由重建过程会降低网络的性能。AODV协议中采用本地修复机制来减少源节点路由重建的次数。基于这一思想,文章提出了一种AODV路由协议改进算法SRP,旨在进一步提高本地修复的成功率。仿真结果表明,在拓扑结构变化迅速的Ad hoc网络中,SRP协议比AODV路由协议有更好的网络性能。     

Ad Hoc网络中一种基于灰色关联算法的路由协议

针对移动Ad Hoc网络中节点任意移动、网络拓扑频繁变化导致以最小跳数作为路由选择机制的AODV路由协议面临频繁连接中断而造成网络QoS下降的问题,文章综合节点的剩余电量、剩余队列长度和源节点到目的节点的跳数三个跨层信息,提出一种基于灰色关联算法的改进AODV路由协议(GRA-AODV)。仿真结果显示:相比于改进前的AODV协议,改进之后的GRA-AODV(Gray Relevance AlgorithmAODV)协议在稍微增加路由开销的情况下,具有更低的平均端到端时延和更低的分组丢失率,在拓扑频繁变化的移动Ad Hoc网络中具有较好的鲁棒性。     

基于蚁群算法的移动自组网AODV路由协议动态优化

目前研究的移动自组网AODV路由协议优化方法数据传输时延较高.为了解决上述问题,.研究了移动自组网AODV路由协议动态优化方法,提出基于蚁群算法优化了路由通信传输路径的规划方法.调整了路径规划的避障规则和关键节点敏感度,增强了关键路径节点的信息素浓度并设置了信息素等级划分,进一步优化了通信传输最优路径的识别与规划方案....     

基于802.11 MAC的移动Ad Hoc网络AODV路由协议改进算法

基于802.11的Ad Hoc网络AODV路由协议会引入通信盲区问题,使路由发现信息建立的路由不能很好地满足高速数据分组的传输,本文在传统通信盲区解决方案的基础上提出一种AODV路由协议改进算法.Opnet仿真表明,改进算法能有效地提高Ad-hoc网络性能.     

一种改进的基于能量优化的AODV路由协议

针对节点能量有限、消耗过快易导致网络分隔的问题,提出一种改进的基于能量优化的AODV路由协议(IEO-AODV)。以AODV路由协议为基础,通过综合考虑节点剩余能量和路由跳数进行路径选择,在路由过程中,中间节点在转发路由请求时进行一个与自身剩余能量有关延迟,在目的节点进行一个延迟记录,最后根据评估函数选取最优路由。仿真结果表明,与经典AODV相比,所改进的方案能均衡网络的能量消耗,在分组投递率、延长网络的生存时间等方面有较大的优势。     

一种基于AODV路由协议的分簇算法研究

基于距离向量的按需路由协议AODV是AdHoc网络研究的热点之一。该协议有效减少了建立和维护路由所需要的开支,但是随着网络节点发送数据量的增加,网络性能会迅速下降。为了提高AdHoc网络的路由效率和可靠性,文章提出了一种基于AODV路由协议的分簇算法。经仿真研究分析表明,该算法提高了网络节点的平均每跳吞吐率,减少了节点的平均每跳时延。     

基于链路可用性预测的AODV路由协议研究

传统的AODV路由协议无法适应Ad hoc网络拓扑的高度动态变化.对AODV路由算法进行链路可用性预测扩展,节点通过接收分组的能量值和链路连续可用时间选择最可靠的路径进行路由,并在链路真正失效之前启动预先修复过程.仿真结果表明,改进后的AODV协议提高了分组的投递率,降低了分组端到端平均传输延时,路由协议的可靠性得到改进.     

AODV路由协议路由修复研究和改进

Ad Hoc网络具备拓扑的动态性,该特性使得一般路由协议无法正常工作,且网络节点移动变化性,也会提升路由断裂的发生率。AODV路由协议作为Ad Hoc网络目前使用最为频繁的一种路由协议,其重要性和高效率性不言而喻。主要对AODV路由协议的修复研究与改进进行分析和探讨,从AODV协议的工作原理、修复研究以及改进方法等几个方面进行了阐述。     

MANET中基于AODV的跨层多度量路由协议

针对无线自组网按需平面距离向量路由协议(AODV)路由度量的单一化而引起的节点能耗枯竭,形成的网络区域化以及路径拥塞问题,提出一种多度量路径选择机制的路由协议――M-AODV。以AODV路由协议为基础,在路由发现阶段,根据设定的能量阈值和接收信号强度阈值选择能量较高和信号强度较强的节点作为路由节点;在路径选择阶段,首先根据物理层的接收信号强度、拥塞度和跳数计算每段链路稳定值,其次将每段路径稳定值进行累加得到整条路径的稳定值,最后选择稳定值最大的路径作为最优路径。使用NS2.35仿真软件仿真,结果表明：改进后的协议与AODV相比在端到端延时缩短了近30%,在数据包传输率、吞吐量和节点存活率方面优于AODV和I-AODV-SE路由算法。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NEXT GENERATION WIRELESS NETWORKS–ESPECIALLY THE USE OF MILLI-MICROWAVE BANDS

The global bandwidth shortage of wireless communications has motivated the exploration of the naillimeter wave （ram-wave） frequency spectrum for the next generation wireless communications. Recent advances in RF CMOS technology and high speed baseband signal processing technologies have enabled tile extensive research and development of turn-wave wireless communications. The multi gigabit per second data rate of ram-wave system will lead to applications in many important scenarios, such as WPAN, WLAN,back-haul for cellular system. And the frequency bands include 28 GHz, 38 GHz, 45GHz, 60GHz, E-BAND and even beyond 100 GHz. The propagation and the imitation of the RF circuits design in these frequency bands make the directional antennas be inevitable for mm-wave communications.