共查询到15条相似文献,搜索用时 156 毫秒
1.
2.
304不锈钢室温和高温单轴循环塑性的实验研究 总被引:2,自引:0,他引:2
对304不锈钢进行了室温和高温单轴应变控制和应力控制下的系统循环试验。揭示和分析了循环应变幅值、平均应变及其历史和温度历史对材料应变循环特性的影响以及应力幅值、平均应力及其历史以及温度对循环棘轮行为的影响。也讨论了应变循环和应力循环间交互作用对材料循环塑性行为的影响。研究表明,无益单轴应变循环特性还是非对称单轴应力循环下的棘轮效应不仅取决于当前温度和加载状态,而且强烈依赖于其加载历史。研究得到了一些有助于304不锈钢室温和高温单轴循环行为本构描述的结果。 相似文献
3.
4.
纯铝在单轴应力循环作用下棘轮行为的试验研究 总被引:4,自引:0,他引:4
对纯铝进行了单轴应变控制和应力控制下的系统循环试验。对纯铝应变循环下的循环应变幅值、应变幅值历史、平均应变对循环特性的影响进行了揭示,对纯铝在非对称应力循环下的应力幅值、平均应力及其历史对循环蠕变〈即棘轮〉的影响进行了分析,得到了纯铝单轴循环行为的一些有意义的结果。 相似文献
5.
6.
本文对316L不锈钢进行了单轴与多轴非比例路径下的应力控制棘轮试验,考察了应力幅值、平均应力和加载历程对棘轮特性的影响。同时进行了应变控制循环试验以研究材料的应力松弛特性。试验结果表明轴向棘轮效应在对称剪切荷载下效果明显,同时棘轮应变随应力幅值和平均应力的增加而增加。研究了Chen-Jiao随动强化模型与Jiang-Sehitoglu随动强化模型采用的单轴与多轴参数对背应力分量增量方向的影响,将Chen-Jiao模型中的多轴系数替换为界面饱和率,并在此基础上引入新的参数对塑性模量系数进行修正,计算结果表明修正后的模型能提升应力控制下多轴棘轮的预测精度,并能很好的预测应力松弛现象,表明了新模型的正确性与有效性。 相似文献
7.
8.
40钢非比例循环塑性行为研究 总被引:1,自引:0,他引:1
对40钢在拉扭循环复杂应变路径下的硬化特性和流动特性进行了实验研究。研究表明:40钢材料的循环硬/软化不但依赖于应变路径形状,而且依赖于等效应变幅值,还具有路径历史效应;材料的塑性流动几乎不受先前路径历史的影响,仅依赖于当前应变路径形状和等效奕变幅值。 相似文献
9.
10.
11.
Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations 总被引:1,自引:0,他引:1
The uniaxial and non-proportionally multiaxial ratcheting behaviors of SS304 stainless steel at room temperature were initially researched by experiment and then were theoretically described by a cyclic constitutive model in the framework of unified visco-plasticity. The effects of cyclic stress amplitude, mean stress, and their histories on the ratcheting were experimentally investigated under uniaxial and different multiaxial loading paths. The shapes of non-proportional loading paths were linear, circular, elliptical and rhombic, respectively. In the constitutive model, the rate-dependent behavior of the material was reflected by a viscous term; the cyclic flow and cyclic hardening behaviors of the material under asymmetrical stress-controlled cycling were reflected by the evolution rules of kinematic hardening back stress and isotropic deforming resistance, respectively. The effect of loading history on the ratcheting was also considered by introducing two fading memorization functions for maximum inelastic strain amplitude and isotropic deformation resistance, respectively, into the constitutive model. The effect of multiaxial loading path on the ratcheting was reflected by a non-proportional factor defined in this work. The predicting ability of the developed model was proved to be good by comparing the simulations with corresponding experiments. 相似文献
12.
Uniaxial ratcheting and failure behaviors of two steels 总被引:2,自引:0,他引:2
G.Z. Kang Y.G. Li J. Zhang Y.F. Sun Q. Gao 《Theoretical and Applied Fracture Mechanics》2005,43(2):199-209
The strain cyclic characteristics, ratcheting and failure behaviors of 25CDV4.11 steel and SS304 stainless steel were experimentally studied under uniaxial cyclic tests and at room temperature. The cyclic hardening/softening features of the materials were first observed under uniaxial strain cycling; and then the ratcheting and failure behaviors of the materials were researched in detail under cyclic stressing. The effects of stress amplitude and mean stress on the ratcheting and failure were discussed under uniaxial asymmetrical stress cycling. It is concluded that the ratcheting and failure behaviors of the materials depend greatly on the cyclic softening/hardening features of the materials and the stress values of cyclic loading. Some conclusions useful to understand the fatigue failure of the materials presented under asymmetrical cyclic stressing are obtained. 相似文献
13.
ON NONPROPORTIONAL CYCLIC PLASTIC BEHAVIOR OF STEEL 40 总被引:1,自引:0,他引:1
Cai Lixun Yang Xianjie Southwest Jiaotong University Chengdu P. R. China 《Acta Mechanica Solida Sinica》1995,8(1):84-93
An experimental investigation was carried out on the flow characteristicand hardening of steel 40 subjected to complex combined axial-torsional cyclicstraining. For a specific cyclic strain path, the steel has mainly cyclic softeningbehavior when the strain amplitude is small. While with an increase of the effectivestrain amplitude, the softening becomes small, but there is the cyclic softening eventhough the steel is subjected to the cyclic loading by a square strain path. However, thesteel has cyclic additional hardening by a nonproportional path, compared with theproportional cycling. Generally, the additional hardening is small and its historicaleffect is not obvious at small strain amplitude. The additional hardening is remarkableby a cross-triangular strain path of large strain amplitude. The memory of the historyof nonproportional cyclic loading, the direction of plastic flow and the plastic modulusof the steel were also studied. 相似文献
14.
An experimental study was carried out for the cyclic properties of pure aluminium subjected to uniaxial cyclic straining and stressing. For a material of pure aluminium the effects of the cyclic strain amplitude history and mean strain on the cyclic deformation behavior were investigated, and the influences of stress amplitude, mean stress and their histories on cyclic creep (i. e., ratcheting) were analyzed. It is shown that either uniaxial cyclic property under cyclic straining or ratcheting behavior under asymmetric uniaxial loading depends not only on the current loading, but also on the previous loading history. Some significant results were obtained.Financial support from NFSC is acknowledged. 相似文献
15.
The uniaxial ratcheting of SS304 stainless steel at high temperatures (300, 600 and 700 °C) were analyzed experimentally, and described by a cyclic constitutive visco-plasticity model. The rate dependence of the material was accounted for by introducing a viscous term. The cyclic hardening and cyclic flow behavior of the material under asymmetrical stress-controlled cycling were described by the evolution rules of kinematic hardening back stress and isotropic deforming resistance. Under the isothermal condition, temperature effect was included by terms involving temperature in the evolution equations of isotropic deforming resistance. The effect of load history on ratcheting was also considered by introducing a fading memory function of the maximum inelastic strain amplitude and isotropic deformation resistance. After the material constants were determined from the experimental data, the uniaxial ratcheting of SS304 stainless steel was numerically simulated and compared with the corresponding experimental results at high temperatures. The predicted results agree well with the experimental ones. 相似文献