Voltammetric determination of norepinephrine in the presence of acetaminophen using a novel ionic liquid/multiwall carbon nanotubes paste electrode

A novel multiwall carbon nanotubes (MWCNTs) modified carbon ionic liquid electrode (CILE) was fabricated and used to investigate the electrochemical behavior of norepinephrine (NP). MWCNTs/CILE was prepared by mixing hydrophilic ionic liquid, 1-methyl-3-butylimidazolium bromide (MBIDZBr), with graphite powder, MWCNTs, and liquid paraffin. The fabricated MWCNTs/CILE showed great electrocatalytic ability to the oxidation of NE. The electron transfer coefficient, diffusion coefficient, and charge transfer resistant (R_ct) of NE at the modified electrode were calculated. Differential pulse voltammetry of NE at the modified electrode exhibited two linear dynamic ranges with slopes of 0.0841 and 0.0231 μA/μM in the concentration ranges of 0.3 to 30.0 μM and 30.0 to 450.0 μM, respectively. The detection limit (3σ) of 0.09 μM NP was achieved. This modified electrode exhibited a good ability for well separated oxidation peaks of NE and acetaminophen (AC) in a buffer solution, pH 7.0. The proposed sensor was successfully applied for the determination of NE in human urine, pharmaceutical, and serum samples.     

Multi-walled carbon nanotube modified carbon paste electrode as an electrochemical sensor for the determination of epinephrine in the presence of ascorbic acid and uric acid

A biocompatible electrochemical sensor for selective detection of epinephrine (EP) in the presence of 1000-fold excess of ascorbic acid (AA) and uric acid (UA) was fabricated by modifying the carbon paste electrode (CPE) with multi-walled carbon nanotubes (MWCNTs) using a casting method. The electro-catalytic activity of the modified electrode for the oxidation of EP was investigated. The current sensitivity of EP was enhanced to about five times upon modification. A very minimum amount of modifier was used for modification. The voltammetric response of EP was well resolved from the responses of AA and UA. The electrochemical impedance spectroscopic (EIS) studies reveal the least charge transfer resistance for the modified electrode. The AA peak that is completely resolved from that of EP at higher concentrations of AA and the inability of the sensor to give an electrochemical response for AA below a concentration of 3.0 × 10^? 4 M makes it a unique electrochemical sensor for the detection of EP which is 100% free from the interference of AA. Two linear dynamic ranges of 1.0 × 10^? 4–1.0 × 10^? 5 and 1.0 × 10^? 5–5.0 × 10^? 7 M with a detection limit of 2.9 × 10^? 8 M were observed for EP at modified electrode. The practical utility of this modified electrode was demonstrated by detecting EP in spiked human blood serum and EP injection. The modified electrode is highly reproducible and stable with anti fouling effects.     

Electrocatalytic determination of dopamine in the presence of uric acid using an indenedione derivative and multiwall carbon nanotubes spiked in carbon paste electrode

In the present study, a modified carbon paste electrode (CPE) containing multi-wall carbon nanotubes and an indenedione derivative(IMWCNT?CPE) was constructed and was successfully used for dopamine(DA) electrocatalytic oxidation and simultaneous determination of DA and uric acid (UA). Cyclic voltammograms of the IMWCNT?CPE show a pair of well-defined and reversible redox. The obtained results indicate that the peak potential of DA oxidation at IMWCNT?CPE shifted by about 65 and 185 mV toward the negative values compared with that at a MWCNT and indenedione modified CPE, respectively. The electron transfer coefficient, α, and the heterogeneous electron transfer rate constant, k′, for the oxidation of DA at IMWCNT?CPE were calculated 0.4 ± 0.01 and (1.13 ± 0.03) × 10^? 3 cm s^? 1, respectively. Furthermore, differential pulse voltammetry (DPV) exhibits two linear dynamic ranges of 1.9–79.4 μM, and 79.4–714.3 μM and a detection limit of 0.52 μM for DA determination. Then IMWCNT?CPE was applied to the simultaneous determination of DA and UA with DPV. Finally, the activity of the modified electrode was also investigated for determination of DA and UA in real samples, such as injection solution of DA and urine, with satisfactory results.     

Voltammetric sensor based on carbon paste electrode modified with molecular imprinted polymer for determination of sulfadiazine in milk and human serum

A new sensitive voltammetric sensor for determination of sulfadiazine is described. The developed sensor is based on carbon paste electrode modified with sulfadiazine imprinted polymer (MIP) as a recognition element. For comparison, a non-imprinted polymer (NIP) modified carbon paste electrode was prepared. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods were performed to study the binding event and electrochemical behavior of sulfadiazine at the modified carbon paste electrodes. The determination of sulfadiazine after its extraction onto the electrode surface was carried out by DPV at 0.92 V vs. Ag/AgCl owing to oxidation of sulfadiazine. Under the optimized operational conditions, the peak current obtained at the MIP modified carbon paste electrode was proportional to the sulfadiazine concentration within the range of 2.0 × 10^? 7–1.0 × 10^? 4 mol L^? 1 with a detection limit and sensitivity of 1.4 × 10^? 7 mol L^? 1 and 4.2 × 10⁵ μA L mol^? 1, respectively. The reproducibility of the developed sensor in terms of relative standard deviation was 2.6%. The sensor was successfully applied for determination of sulfadiazine in spiked cow milk and human serum samples with recovery values in the range of 96.7–100.9%.     

Highly selective and sensitive voltammetric sensor based on modified multiwall carbon nanotube paste electrode for simultaneous determination of ascorbic acid,acetaminophen and tryptophan

A carbon-paste electrode modified with multiwall carbon nanotubes (MWCNTs) was used for the sensitive and selective voltammetric determination of ascorbic acid (AA) in the presence of 3,4-dihydroxycinnamic acid (3,4-DHCA) as mediator. The mediated oxidation of AA at the modified electrode was investigated by cyclic voltammetry (CV), chronoamperommetry and electrochemical impedance spectroscopy (EIS). Also, the values of catalytic rate constant (k), and diffusion coefficient (D) for AA were calculated. Using square wave voltammetry (SWV), a highly selective and simultaneous determination of AA, acetaminophen (AC) and tryptophan (Trp) has been explored at the modified electrode. The modified electrode displayed strong function for resolving the overlapping voltammetric responses of AA, AC and Trp into three well-defined voltammetric peaks. In the mixture containing AA, AC and Trp, the three compounds can well separate from each other with potential differences of 200, 330 and 530 mV between AA and AC, AC and Trp and AA and Trp, respectively, which was large enough to determine AA, AC and Trp individually and simultaneously.     

Electrochemical sensor for selective determination of N-acetylcysteine in the presence of folic acid using a modified carbon nanotube paste electrode

In the present paper, a novel benzoylferrocene (BF) modified carbon nanotube paste electrode (BFCNPE) was prepared. The modified electrode was further used for the successful determination of N-acetylcysteine (NAC), and it showed an excellent electrocatalytic oxidation activity toward NAC with a lower overvoltage, pronounced current response, and good sensitivity. Under the optimized experimental conditions, the proposed electrochemical NAC sensor exhibited a linear calibration plot that ranged from 3.0 × 10^? 7 to 7.0 × 10^? 4 M with a detection limit of 9.0 × 10^? 8 M. Also, Square wave voltammetry (SWV) was used for simultaneous determination of NAC and folic acid (FA) at the modified electrode. Finally, the proposed method was applied to the determination of NAC in NAC tablets.     

MWCNTs/Cu(OH)2 nanoparticles/IL nanocomposite modified glassy carbon electrode as a voltammetric sensor for determination of the non-steroidal anti-inflammatory drug diclofenac

This paper describes the development and utilization of a new nanocomposite consisting of Cu(OH)₂ nanoparticles, hydrophobic ionic liquid 1-ethyl-3-methylimidazolium hexafluorophosphate (EMIMPF₆) and multiwalled carbon nanotubes for glassy carbon electrode modification. The nanocomposite was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM) along with energy-dispersive X-ray spectroscopy (EDX). The modified electrode was used for electrochemical characterization of diclofenac. Using differential pulse voltammetry, the prepared sensor showed good sensitivity and selectivity with low overpotential for the determination of diclofenac in the range from 0.18 to 119 μM, with a detection limit of 0.04 μM. Electrochemical studies suggested that the MWCNTs/Cu(OH)₂ nanoparticles/IL nanocomposite modified electrode provided a synergistic augmentation on the voltammetric behavior of electrochemical oxidation of diclofenac, which was indicated by the improvement of anodic peak current.     

An electrochemical sensor based on 1-benzyl-4-ferrocenyl-1H-[1,2,3]-triazole/carbon nanotube; detection of D-penicillamine in the presence of tryptophan

A glassy carbon electrode modified with 1-benzyl-4-ferrocenyl-1H-[1,2,3]-triazole (BFT) and carbon nanotubes have been applied to the electrocatalytic oxidation of D-penicillamine (D-PA) which reduced the overpotential by about 470 mV with obviously increase the current response. Due to its strong electrocatalytic activity towards D-PA, the modified electrode can resolve the overlapped voltammetric waves of D-PA and tryptophan (TRP) into two well-defined voltammetric peaks with peak-to-peak separation in potentials of about 270 mV. This property allows to selective determination of D-PA in the presence of TRP. The transfer coefficient (a) for the electrocatalytic oxidation of D-PA and diffusion coefficient of this substance under the experimental conditions were also investigated. In phosphate buffer solution (PBS) of pH 8.0, the oxidation current increased linearly with two concentration intervals of D-PA, one is 1.0 to 10.0 μM and, the other is 10.0 to 800.0 μM. The detection limit (3σ) obtained by square wave voltammetry (SWV) was 0.1 μM. The proposed method was successfully applied to the determination of D-PA, and TRP in real samples.     

Characterization of carbon nanotubes decorated with NiFe2O4 magnetic nanoparticles as a novel electrochemical sensor: Application for highly selective determination of sotalol using voltammetry

A magnetic nano‐composite of multiwall carbon nanotube, decorated with NiFe₂O₄ nanoparticles, was synthesized with citrate sol–gel method. The multiwall carbon nanotubes decorated with NiFe₂O₄ nanoparticles (NiFe₂O₄–MWCNTs) were characterized with different methods such as Fourier transform infrared spectroscopy (FT‐IR), transmission electron microscopy (TEM), atomic force microscopy (AFM), vibrating sample magnetometer (VSM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The new nano-composite acts as a suitable electrocatalyst for the oxidation of sotalol at a potential of 500 mV at the surface of the modified electrode. Linear sweep voltammetry exhibited two wide linear dynamic ranges of 0.5–1000 μmol L^? 1 sotalol with a detection limit of 0.09 μmol L^? 1. The modified electrode was used as a novel electrochemical sensor for the determination of sotalol in real samples such as pharmaceutical, patient and safe human urine.     

Selective determination of sucrose based on electropolymerized molecularly imprinted polymer modified multiwall carbon nanotubes/glassy carbon electrode

A novel and selective electrochemical sensor was successfully developed for the determination of sucrose by integrating electropolymerization of molecularly imprinted polymer with multiwall carbon nanotubes. The sensor was prepared by electropolymerizing of o-phenylenediamine in the presence of template, sucrose, on a multiwall carbon nanotube-modified glassy carbon electrode. The sensor preparation conditions including sucrose concentration, the number of CV cycles in the electropolymerization step, pH of incubation solution, extraction time of template from the imprinted film and the incubation time were optimized using response surface methodology (RSM). A mixture of acetonitrile/acetic acid was used to remove the template. Hexacyanoferrate(II) was used as a probe to characterize the sensor using electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. Capturing of sucrose by the modified electrode causes decreasing the response of the electrode to hexacyanoferrate(II). Calibration curve was obtained in the sucrose concentration range of 0.01–10.0 mmol L^? 1 with a limit of detection 3 μmol L^? 1. This sensor provides an efficient way for eliminating interferences from compounds with similar structures to sucrose. The sensor was successfully used to determine sucrose in sugar beet juices with satisfactory results.     

Application of ionic liquid–TiO2 nanoparticle modified carbon paste electrode for the voltammetric determination of benserazide in biological samples

An ionic liquid–TiO₂ nanoparticle modified carbon paste electrode (IL–TiO₂/CPE) was used as a fast and sensitive tool for the investigation of the electrochemical oxidation of benserazide using voltammetry. This modified electrode has been fabricated using hydrophilic ionic liquid (n-hexyl-3-methylimidazolium hexafluoro phosphate) as a binder. The modified electrode offers a considerable improvement in voltammetric sensitivity toward benserazide, compared to the bare electrode. Using differential pulse voltammetry (DPV), the electrocatalytic oxidation peak current of benserazide shows a linear calibration curve in the range of 1.0–600 μmol L^? 1 benserazide. The limit of detection was equal to 0.4 μmol L^? 1. The relative standard deviation (RSD%) for eight successive assays of 10 μmol L^? 1 benserazide was 1.1%. Finally, the proposed method was successfully applied to the determination of benserazide in real samples such as blood serum and urine.     

A simple and efficient electrochemical sensor for folic acid determination in human blood plasma based on gold nanoparticles–modified carbon paste electrode

Folic acid (FA) is a water soluble vitamin that exists in many natural species. The lack of FA causes some deficiencies in human body, so finding a simple and sensitive method for determining the FA is important. A new chemically modified electrode was fabricated for determination of FA in human blood plasma using gold nanoparticles (AuNPs) and carbon paste electrode (CPE). Gold nanoparticles–modified carbon paste electrode (AuNPs/CPE) was characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The experimental parameters such as pH, scan rate (ν) and amount of modifier were studied by cyclic voltammetry and the optimized values were chosen. The electrochemical parameters such as diffusion coefficient of FA (D_FA), electrode surface area (A) and electron transfer coefficient (α) were calculated. Square wave voltammetry as an accurate technique was used for quantitative calculations. A good linear relation was observed between anodic peak current (i_pa) and FA concentration (C_FA) in the range of 6 × 10^? 8 to 8 × 10^? 5 mol L^? 1, and the detection limit (LOD) achieved 2.7 × 10^? 8 mol L^? 1, that is comparable with recently studies. This paper demonstrated a novel, simple, selective and rapid sensor for determining the FA in the biological samples.     

Electroanalytical properties and application of anthraquinone derivative-functionalized multiwalled carbon nanotubes nanowires modified glassy carbon electrode in the determination of dissolved oxygen

We herein report a simple, low cost and green preparation of nanowires of (anthraquinone-2-carboxylic acid/amino functionalized) multiwalled carbon nanotubes (HOOC-2-AQ/AMWCNTs) which has been further employed for the development of highly sensitive oxygen sensor. The prepared composite has been characterized by TEM and electrochemical studies. The glassy carbon electrode modified with composite shows an irreversible and good electrocatalytic activity for the reduction of oxygen. The reduction potential of the oxygen was shifted 460 mV towards the positive potential with this modified electrode as compared to bare glassy carbon electrode. The prepared material was stable with no leaching observed of the mediator. A linear response range of 0.2–6.8 mg L^?1, with a sensitivity of 5.0 μA L mg^?1 and a detection limit of 0.02 mg L^?1 were obtained with this sensor.     

Simultaneous determination of phenylhydrazine and hydrazine by a nanostructured electrochemical sensor

In the present paper, the use of a nanostructured electrochemical sensor was described for simultaneous determination of phenylhydrazine (PhH) and hydrazine (HZ). This electrochemical sensor was prepared by a simple and rapid method by modification of carbon paste electrode with a derivative of hydroquinone and TiO₂ nanoparticles. The modified electrode showed an excellent character for electrocatalytic oxidation of PhH. Using differential pulse voltammetry, a highly selective and simultaneous determination of PhH and HZ has been explored at the modified electrode. Differential pulse voltammetry peak currents of PhH and HZ increased linearly with their concentration at the ranges of 2.0 × 10^? 6 to 1.0 × 10^? 3 M and 7.5 × 10^? 5–1.0 × 10^? 3 M, respectively and the detection limits for PhH and HZ were 7.5 × 10^? 7 M and 9.0 × 10^? 6 M, respectively.     

Preparation and characterization of copper nanoparticles/zinc oxide composite modified electrode and its application to glucose sensing

We report a new method for selective detection of d(+)-glucose using a copper nanoparticles (Cu-NPs) attached zinc oxide (ZnO) film coated electrode. The ZnO and Cu-NPs were electrochemically deposited onto indium tin oxide (ITO) coated glass electrode and glassy carbon electrode (GCE) by layer-by-layer. In result, Cu-NPs/ZnO composite film topography was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. SEM and AFM confirmed the presence of nanometer sized Cu-NPs/ZnO composite particles on the electrode surface. In addition, X-ray diffraction pattern revealed that Cu-NPs and ZnO films were attached onto the electrode surface. Indeed, the Cu-NPs/ZnO composite modified electrode showed excellent electrocatalytic activity for glucose oxidation in alkaline (0.1 M NaOH) solution. Further, we utilized the Cu-NPs/ZnO composite modified electrode as an electrochemical sensor for detection of glucose. This glucose sensor showed a linear relationship in the range from 1 × 10^? 6 M to 1.53 × 10^? 3 M and the detection limit (S/N = 3) was found to be 2 × 10^? 7 M. The Cu-NPs/ZnO composite as a non-enzymatic glucose sensor presents a number of attractive features such as high sensitivity, stability, reproducibility, selectivity and fast response. The applicability of the proposed method to the determination of glucose in human urine samples was demonstrated with satisfactory results.     

Electrochemical sensor for ranitidine determination based on carbon paste electrode modified with oxovanadium (IV) salen complex

The preparation and electrochemical characterization of a carbon paste electrode modified with the N,N-ethylene-bis(salicyllideneiminato)oxovanadium (IV) complex ([VO(salen)]) as well as its application for ranitidine determination are described. The electrochemical behavior of the modified electrode for the electroreduction of ranitidine was investigated using cyclic voltammetry, and analytical curves were obtained for ranitidine using linear sweep voltammetry (LSV) under optimized conditions. The best voltammetric response was obtained for an electrode composition of 20% (m/m) [VO(salen)] in the paste, 0.10 mol L^? 1 of KCl solution (pH 5.5 adjusted with HCl) as supporting electrolyte and scan rate of 25 mV s^? 1. A sensitive linear voltammetric response for ranitidine was obtained in the concentration range from 9.9 × 10^? 5 to 1.0 × 10^? 3 mol L^? 1, with a detection limit of 6.6 × 10^? 5 mol L^? 1 using linear sweep voltammetry. These results demonstrated the viability of this modified electrode as a sensor for determination, quality control and routine analysis of ranitidine in pharmaceutical formulations.     

Development of piroxicam sensor based on molecular imprinted polymer-modified carbon paste electrode

A new voltammetric sensor for piroxicam measurement is introduced. A piroxicam-selective molecularly imprinted polymer (MIP) and a non-imprinted polymer (NIP) were synthesized in a non-covalent approach using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linking monomer via a free radical polymerization and then was used for carbon paste (CP) electrode preparation. The MIP, embedded in the carbon paste electrode, functioned as a selective recognition element and pre-concentrator agent for piroxicam determination. The prepared electrode was used for piroxicam measurement via a three-step procedure including analyte extraction in the electrode, electrode washing and electrochemical measurement of piroxicam. The MIP–CP electrode showed good recognition ability in comparison to NIP–CP. Some parameters affecting sensor response were optimized. Under optimum conditions the oxidation peak current was proportional to piroxicam concentration over the range 2–190 and 190–2500 nM. The detection limit was found to be 0.5 nM. This sensor has been successfully applied for the determination of piroxicam in pharmaceutical formulations and serum samples.     

Electrochemical study of atenolol at a carbon paste electrode modified with mordenite type zeolite

The electrochemical behavior of atenolol (ATN) at the surface of a carbon paste electrode modified with mordenite zeolite (MOR-MCPE) is described. The prepared electrode shows a good electrocatalytic activity toward the oxidation of atenolol, which is leading to considerable improvement of sensitivity (anodic current). Whereas at the surface of unmodified electrode an electrochemical activity for atenolol cannot be observed, a sharp anodic wave is obtained using the prepared modified electrode. The mechanism of oxidation of ATN at the surface of the MOR-MCPE containing various percents of mordenite is thoroughly investigated by cyclic and differential pulse voltammetry. Acetate, hydrogen phosphate and ammonium buffers were tested as the supporting electrolyte to find the optimal pH value. The optimal pH value was 5.0 for acetate buffer. A linear voltammetric response for ATN was obtained in the concentration range of 0.4 to 80 µM with a slope of 0.676 µA/µM. The LOD and LOQ of the electrode were 0.1 µM (26.6 µg/L) and 0.35 μM (93.1 µg/L), respectively. The results obtained for ATN in pharmaceutical formulations (tablets) was in agreement with compared reference method. In conclusion, this study has illustrated that the proposed electrode modified with mordenite is suitable for selective measurements of ATN.     

Gold nanoparticle/single-walled carbon nanotube film on the surface of glassy carbon electrode and its application

A sensor based on gold nanoparticle/single-walled carbon nanotube film on the surface of glassy carbon electrode is prepared. Electrochemical behavior of adrenaline hydrochloride (AH) on the surface of gold nanoparticle/single-walled carbon nanotube modified glassy carbon electrode is investigated. A simple, sensitive, and inexpensive method for determination of AH is proposed. The oxidation peak currents is proportional to adrenaline hydrochloride concentrations in the range of 0.20 mg L^? 1 to 1.80 mg L^? 1 in 0.1 M phosphate buffer solution of pH 7.3, the detection limit for AH is 0.06 mg L^? 1, and the recoveries are in the range from 100.0 to 110.0% with RSD of 1.2–1.9% (n = 6).     

Highly sensitive amperometric sensor for micromolar detection of trichloroacetic acid based on multiwalled carbon nanotubes and Fe(II)–phtalocyanine modified glassy carbon electrode

A highly sensitive electrochemical sensor for the detection of trichloroacetic acid (TCA) is developed by subsequent immobilization of phthalocyanine (Pc) and Fe(II) onto multiwalled carbon nanotubes (MWCNTs) modified glassy carbon (GC) electrode. The GC/MWCNTs/Pc/Fe(II) electrode showed a pair of well-defined and nearly reversible redox couple correspondent to (Fe(III)Pc/Fe(II)Pc) with surface-confined characteristics. The surface coverage (Γ) and heterogeneous electron transfer rate constant (k_s) of immobilized Fe(II)–Pc were calculated as 1.26 × 10^? 10 mol cm^? 2 and 28.13 s^? 1, respectively. Excellent electrocatalytic activity of the proposed GC/MWCNTs/Pc/Fe(II) system toward TCA reduction has been indicated and the three consequent irreversible peaks for electroreduction of CCl₃COOH to CH₃COOH have been clearly seen. The observed chronoamperometric currents are linearly increased with the concentration of TCA at concentration range up to 20 mM. Detection limit and sensitivity of the modified electrode were 2.0 μM and 0.10 μA μM^? 1 cm^? 2, respectively. The applicability of the sensor for TCA detection in real samples was tested. The obtained results suggest that the proposed system can serve as a promising electrochemical platform for TCA detection.