利用强度调制消除零频的傅里叶变换轮廓测量

采用双色正弦条纹投影的傅里叶变换轮廓术中零频分量的扩展对有用基频分量有影响,为此提出一种新型的基于强度调制的零频消除方法提高测量准确度和范围.通过采集一帧变形彩色条纹图并分离颜色通道获得两幅相位差为π的条纹图,对变形条纹做强度调制校正,进而消除零频分量,实现高度解析.理论模拟和实验测试均验证了此方法的有效性.相比传统的...     

利用强度调制消除零频的傅里叶变换轮廓测量

采用双色正弦条纹投影的傅里叶变换轮廓术中零频分量的扩展对有用基频分量有影响,为此提出一种新型的基于强度调制的零频消除方法提高测量准确度和范围.通过采集一帧变形彩色条纹图并分离颜色通道获得两幅相位差为π的条纹图,对变形条纹做强度调制校正,进而消除零频分量,实现高度解析.理论模拟和实验测试均验证了此方法的有效性.相比传统的相移消除零频分量的方法,此方法具有显著的速度优势,适合于三维物体的实时测量.     

一种分析薄膜振动模式的结构光条纹时间平均法

提出了一种用于振动物体表面快速测量的光学测试系统和方法。该系统采用结构光三维传感技术,利用时间平均法来实现对振动表面的测量和振动模式分析。用低帧频商用CCD相机记录由光栅投影到振动物体表面上形成的一系列变形正弦条纹,对获取的一帧变形条纹经过二维傅里叶变换、频谱滤波、逆傅里叶变换等处理得到调制物体振幅的零级贝塞尔函数分布。给出了该方法的理论分析,推导了相应的计算公式。计算机模拟和实验验证了该方法的可行性。实验证明,该方法具有数据获取速度快,全场非接触测量以及实验装置简单等优点。     

平行光波阵面调制下的双频干涉条纹形貌测量

传统形貌测量多采用光栅投影,其投影条纹的非正弦性及条纹密度的限制将影响形貌测量的精度,为了实现高密度正弦条纹投影的可调性,采用平行光干涉投影形成明亮且对比度高的正弦条纹,避免条纹的正弦畸变。在平行光波阵面调制下,通过相控阵调节两光束交会角度得到所需的条纹频率,实现条纹投影的可调性,再将调制后双频应用到解包裹中提高解相精度。对比分析了单频和双频解包裹条件下,一个最大高度为35.80 mm物体形貌的恢复,其最高点恢复相对误差分别为2.7%、1.6%。实验结果表明该方法具有有效性与可行性,具有较高的精度。     

基于双色条纹投影的快速傅里叶变换轮廓术

在实际傅里叶变换轮廓术测量中，获取的条纹图扩展的零频分量对傅里叶变换轮廓术的测量精度和测量范围有很大影响，甚至妨碍正确三维面形的恢复。π相移技术常被用来消除零频分量对测量的影响，但需要在测量系统中安装精密相移装置，并需要采集两帧具有π相位差的条纹图。传统傅里叶变换轮廓术中，完成精密相移需要较长的时间，影响了傅里叶变换轮廓术测量方法的实时性。提出了采用双色正弦光栅投影来实现从一帧条纹图中消除零频对傅里叶变换轮廓术测量的影响。该方法同传统的π相移方法相比，不需要相移装置，测量系统简单，并且能真正实现高速测量。     

基于复合光栅投影的快速傅里叶变换轮廓术

在实际傅里叶变换轮廓术测量中,获取条纹图的零频分量对傅里叶变换轮廓术的测量精度和测量范围有很大影响,甚至妨碍三维面形的正确重建。π相移技术常被用来消除零频分量对傅里叶变换轮廓术测量的影响,但它需要采集两帧具有π相位差的条纹图。这影响了傅里叶变换轮廓术测量方法的实时性。提出采用复合光栅投影来实现从一帧条纹图中消除零频对傅里叶变换轮廓术测量的影响,该复合光栅是由两个不同频率的载频分别调制与其方向垂直的两帧具有π相位差的条纹并叠加形成的。实验表明,同传统的π相移方法相比,提出的新方法没有明显降低π相移傅里叶变换轮廓术的的测量精度,因此能真正实现实时高速测量。     

基于双频彩色条纹投影的相位测量去包裹方法

为了提高测量速度,提出一种基于双频彩色条纹投影的相位测量去包裹方法,只需采集一帧图像,就能实现高速测量以及动态物体轮廓测量中的相位去包裹。论述了双频相位测量和变精度去包裹原理,并详细分析影响测量精度的因素。该方法采用计算机生成一帧双频双色正弦条纹图,用液晶数字投影仪投影,并用傅里叶变换的方法对两个单色条纹图进行分析,获得高低两种精度的被测物体高度信息,从而进行变精度去包裹处理。结果表明,利用该方法提高了测量速度,可得到较高的去包裹精度,其测量最大绝对误差为 1．413～-1．582 mm,标准差为0．363 mm。     

基于条纹对比度和背景光校准的正交复合光三维测量方法

提出了一种对条纹对比度和背景光进行校准的正交复合光三维测量方法。从参考平面的复合光栅像中解调获得各帧相移正弦条纹,通过频域滤波的方法获取条纹的零频和基频分量,计算出各帧相移正弦条纹相对第一帧正弦条纹的对比度和背景光比例系数,并以此系数对实物测量时解调出来的各帧变形条纹对比度和背景光进行校准,建立了新的三维测量数学模型。实验证明该方法能降低传统正交复合光三维测量方法中的解相误差,提高系统的测量精度。     

基于圆形条纹投影的相位测量轮廓术研究

编码的圆形正弦条纹在圆心具有零相位,该点可以作为后续相位计算和展开的参考.但是圆形条纹提供的载频相位具有非线性特点,当其用于三维面形测量时,如果圆心在物面上,获取物面高度信息的方法与投影单频直条纹的情况不同.研究基于圆形条纹投影的相移轮廓术,讨论了物面高度引起的图像点坐标的位移量和绝对相位的计算方法,并完成相应的误差分...     

基于组合二值条纹离焦投影的三维面形测量

二值条纹离焦投影技术很好地克服了条纹投影三维测量技术中的非线性影响,有效抑制了投影设备Gamma效应带来的误差.多频条纹二值离焦投影结合时间相位展开算法,是常用的复杂物体三维测量方法.该方法在使用中要保证多个频率二值条纹离焦获得大致相当的正弦性品质,投影时不同频率条纹对应的离焦量不一样,不利于其广泛使用.分析了不同二值...     

Vibration analysis and non-destructive testing with real-time shearography

Real-time laser speckle shearography coupled with vibration stressing is shown to be an effective means of vibration analysis and non-destructive testing. The shearograms are modulated by a system of live fringes. These fringes are shown to be described by the zeroth-order Bessel function of the first kind and their visibility decreases with increasing fringe order. In vibration analysis, the instantaneous fringe pattern depicts the out-of-plane surface displacement gradient of the object surface at various resonance modes. In non-destructive testing, the flaw depth in a component can be determined without having to determine fringe orders. There is good agreement between the results obtained using the method and those from theory and time-average holography. A major advantage of real-time shearography is its facility for continuous assessment of a vibrating object without the need for secondary shearogram reconstruction.     

A novel color fringe projection based Fourier transform 3D shape measurement method

A novel Fourier transform 3D shape measurement method based on color fringe projection is proposed in order to solve the spectrum overlapping and phase unwrapping problems existed in Fourier transform profilometry (FTP). The R and G components of the color fringe are set to two sinusoidal patterns with different frequencies and the B component is set to the average value of R or G component. Then this pattern is projected to the object and the deformed fringe image is captured. Three gray patterns are separated from the color fringe, the background and high frequency noise can be eliminated using our method and the accurate unwrapped phase can be got. Only one shot color pattern is projected to get the 3D information of the object. Experiment results show that the 3D information of an object can be obtained rapidly and accurately.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

Display of tilt information of vibrating object in time average mode using lateral shearing interferometry and interferometric grating

We have experimentally demonstrated vibration analysis of a reflecting object in time-average mode using shearing interferometry and interferometric grating. Experimental results show that time-average moiré fringes, formed between fringe pattern reflected from object and sinusoidal grating are modulated spatially by the amplitude of vibrating tilt. From the experimental results, information regarding tilt of vibrating objects can be determined.     

用于数字条纹轮廓术的一种基于广义分析模型的后滤波方法

由于数字投影和采集系统的非线性失真,传统的方法通常需对采集到的条纹进行低通或带通滤波从而抑制高次谐波并获取基频分量。基于广义分析模型针对数字条纹轮廓术提出一种对测量后的物体形貌进行后滤波的算法,消除了非线性失真对测量结果所造成的影响并提高了数字条纹轮廓术的测量精度。论述了条纹轮廓术的原理和广义分析模型,分析推导出后滤波算法。仿真和实验结果表明,后滤波方法能够快速准确地实现基于数字投影的三维形貌重建。     

傅里叶变换轮廓术中相位失真的预矫正方法

介绍了一种基于傅里叶变换轮廓术的三维面形测量系统中相位失真的预矫正方法。由于投影系统和成像系统的空间三角位置关系、投影仪的发散照明和两套系统蕴含的光学畸变,投影一幅相位与空间坐标成理想线性关系的标准正弦光场,拍摄到的条纹相位和空间坐标不再呈线性分布,引起相位失真,甚至会影响系统测量精度。该方法借鉴反向条纹投影的思想,计算拍摄光场的非线性相位分布与理想的线性相位分布之间的关系,预先矫正,反算出一个新的待投影光场。实验结果表明这种方法能有效地减小该类相位失真所导致的测量误差,获得了更好的测量结果．     

A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry

In digital fringe projection profilometry, the gamma effect of the used electronic devices seriously affects the accuracy of three-dimensional (3D) topography measurements. Previous gamma correction methods do not take full advantage of the Fourier spectrum of the captured spatial-carrier phase-shifting fringe patterns. Hence, dozens of phase-shifting fringe patterns are required to carry out gamma pre-calibration. In this paper, a fast and accurate gamma correction technique based on a Fourier spectrum analysis is proposed. Only two spatial-carrier fringe patterns with different pre-encoded gamma values are needed and the number of fringe patterns required for gamma pre-calibration is significantly reduced without loss of accuracy. The proposed method is validated by experiments.