Poly(N-ethylaniline) coatings on 304 stainless steel for corrosion protection in aqueous HCl and NaCl solutions

Poly(N-ethylaniline) (PNEA) coatings were grown by potentiodynamic synthesis technique on 304 stainless steel (SS) alloy from 0.1 M of N-ethylaniline (NEA) in 0.3 M oxalic acid solution. Characterization of adhesive and electroactive PNEA coatings was carried out by cyclic voltammetry, FT-IR spectroscopy and scanning electron microscopy (SEM) techniques. The protective properties of PNEA coatings on SS were elucidated using linear anodic potentiodynamic polarization, Tafel and electrochemical impedance spectroscopy (EIS) test techniques, in highly aggressive 0.5 M HCl and 0.5 M NaCl solutions. Linear anodic potentiodynamic polarization test results proved that PNEA coating improved the degree of protection against pitting corrosion in HCl and NaCl solutions. Tafel test results showed that PNEA coating appears to enhancement protection for SS in 0.5 M NaCl and 0.5 M HCl solutions. However, according to long-term EIS results, PNEA coating is better for the protection of SS electrodes during the long immersion period in NaCl compared to that in HCl medium.     

Electropolymerization of poly(N-ethyl aniline) on mild steel: Synthesis, characterization and corrosion protection

Poly(N-ethylaniline) (PNEA) coatings on the mild steel electrode were synthesized by electrochemical oxidation of N-ethylaniline using aqueous oxalic acid solutions as reaction medium. Electrodeposition was carried out by potentiodynamic, potentiostatic and galvanostatic synthesis techniques. Smooth, adhesive and thick PNEA coatings on mild steel could be electrosynthesized during sequential scanning of the potential region between −0.5 and 1.4 V versus SCE, with scan rate of 20 mV s⁻¹. The electrodeposited coatings were characterized by cyclic voltammetry, FT-IR and UV-vis techniques. Corrosion behavior of PNEA coated steels was investigated by linear anodic potentiodynamic polarization technique and Tafel test. Anodic potentiodynamic polarization results showed that electrodissolution current value of PNEA coated steel decreased about 90% compared to that of the uncoated steel in 0.5 M H₂SO₄ aqueous solution. Tafel plots showed also strong decrease of corrosion current for the PNEA coated electrode compared to the uncoated steel electrode in 3% NaCl as corrosive medium.     

Poly(N-methylpyrrole) electrodeposited on copper: Corrosion protection properties

Electrochemical synthesis of poly(N-methylpyrrole) films on copper electrodes from an aqueous oxalic acid has been achieved. A potential higher than 2 V (SCE) was needed to generate the polymer, for this reason, the polymer was in the overoxidized state. The inhibiting corrosion properties of this coating on copper were investigated for the first time in aqueous 0.1 M sodium chloride solution using potentiodynamic polarization, Tafel analyses, open-circuit potential and electrochemical impedance spectroscopy. Corrosion protection properties comparable to those of polypyrrole (PPy) films were observed for these films. A physical barrier effect is the most likely protection mechanism.     

Electrochemical synthesis of polypyrrole (PPy) and PPyǀmetal composites on copper electrode and investigation of their anticorrosive properties

This study reports corrosion protection behaviour of various metal cations electrodeposited onto polypyrrole (PPy) coated copper (Cu) electrode. Before electropolymerization of pyrrole, the Cu electrode was passivated in 0.1 M oxalic acid via cyclic voltammetry method. After the coating process, metal cation electrodeposition onto PPy coating was carried out in 10⁻² M CuCl₂, ZnCl₂, FeCl₂ and NiCl₂ solutions. Corrosion behaviour of uncoated, PPy and PPy|metal coated Cu electrodes was studied in 0.1 M H₂SO₄ solution by using potentiodynamic polarization, chronoamperometric and impedance spectroscopic measurements. Surface morphologies were examined by scanning electron microscope (SEM). All the electrochemical measurements were in good agreement showing that metal electrodeposited PPy coated Cu electrodes have a higher corrosion resistance. Furthermore, SEM results show that while all the samples have a homogeneous distribution of metal cations, zinc and nickel have a much better homogeneous distribution compared to copper and iron. It was found that the best corrosion protection is provided by PPy|Zn and PPy|Ni coatings and there is a significant increase in their polarization resistance with increasing amounts of electrodeposited cations.     

Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum

Electrochemical synthesis of polyaniline (PANI) on aluminum electrode from aqueous solution of 0.25 mol dm⁻³ aniline and 0.2 mol dm⁻³ sodium benzoate has been investigated under potentiodynamic and galvanostatic conditions. Initial corrosion behavior of aluminum and PANI coated aluminum electrode exposed to 3% NaCl has been investigated using electrochemical potentiodynamic and impedance spectroscopy technique (EIS). It was shown that PANI coating initially provide corrosion protection of aluminum, decreasing the corrosion current density at least 15 times.     

Styrene butadiene co-polymer based conducting polymer composite as an effective corrosion protective coating

Electroactive conducting polymer composite coatings of polyaniline (PANI) are electrosynthesized on styrene–butadiene rubber (SBR) coated stainless steel electrode by potentiostatic method using aqueous H₂SO₄ as supporting electrolyte. The protective behaviour of these coatings in different corrosion media (3.5% NaCl and 0.5 M HCl) is investigated using Tafel polarization curves, open circuit potential measurements and electrochemical impedance spectroscopy. The results reveal that SBR/PANI composite coating is much better in corrosion protection than simple PANI coating. The corrosion potential of composite films shifts to more noble values indicating that SBR/PANI composite coating act as an effective corrosion protective layer.     

Poly(o-ethylaniline) coatings for stainless steel protection

The poly(o-ethylaniline) coatings were electrochemically synthesized on 304-stainless steel by using cyclic voltammetry from an aqueous salicylate medium. Cyclic voltammetry, UV–vis absorption spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize these coatings, which indicates that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-ethyaniline on 304-stainless steel. The performance of poly(o-ethylaniline) as protective coating against corrosion of 304-stainless steel in aqueous 3% NaCl was evaluated by the open circuit potential measurements, potentiodynamic polarization technique, cyclic potentiodynamic polarization measurements and electrochemical impedance spectroscopy. The results of the potentiodynamic polarization and cyclic potentiodynamic polarization demonstrate that the poly(o-ethylaniline) coating provides excellent protection to both localized and general corrosion of 304-stainless steel. The corrosion potential was about 0.190 V more positive in aqueous 3% NaCl for the poly(o-ethylaniline) coated steel than that of bare steel and reduces the corrosion rate of steel almost by a factor of 20.     

Electrocatalytic behaviour of a poly(N-methylaniline) filmed electrode to hydroquinone

Poly(N-methylaniline) (PNMA) was prepared on a bare platinum electrode by electrooxidation of N-methylaniline in 1.0 mol dm^–3 HCl. The PNMA film was more stable to anodic treatment than the polyaniline film. The electric conductivity of the PNMA film was potential dependent. High conductivity appeared only within the potential region where PNMA itself was redox-active. The PNMA filmed electrode showed redox response to dissolved hydroquinone whose redox current was evident within the potential region. Furthermore, the PNMA film behaved as an electrocatalyst for the electrode reaction of hydroquinone. The kinetics of the electrocatalytic reaction were investigated mainly using a rotating disc electrode. The experimental results obtained were analysed by the theory of Albery and Hillman, and the rate constant of the electron cross-exchange transfer between hydroquinone and the redox-active sites in the film (k) was determined and found to be 6.4 × 10³ m ^–1 s^–1 at 20° C.     

Electroreduction of oxygen on glassy carbon electrodes modified with in situ generated anthraquinone diazonium cations

The electrochemical reduction of oxygen on glassy carbon (GC) electrodes modified with in situ generated diazonium cations of anthraquinone (AQ) has been studied using the rotating disk electrode (RDE) technique. The electrografting of the GC electrodes was carried out in two different media: in acetonitrile and in an aqueous acidic solution (0.5 M HCl). 1- and 2-Aminoanthraquinone were used as starting compounds for the formation of the corresponding diazonium derivatives. The anthraquinone diazonium cations were generated by reaction of the aminoanthraquinones with tert-butyl nitrite and sodium nitrite in acetonitrile and in 0.5 M HCl, respectively. For comparison purposes, the previously synthesised and crystallised diazonium tetrafluoroborates of anthraquinone were used for the GC surface modification. Cyclic voltammetry was employed to determine the surface concentration of AQ in O₂ free 0.1 M KOH. The electrocatalytic behaviour towards O₂ reduction was similar for all the AQ-modified electrodes studied. The kinetic parameters of oxygen reduction were determined using a surface redox catalytic cycle model. The rate constant of the reaction between the semiquinone radical anion of AQ and molecular oxygen was virtually independent of the point of attachment of the quinone to the electrode surface.     

Corrosion inhibition of stainless steel by polyaniline,poly(2-chloroaniline), and poly(aniline-co-2-chloroaniline) in HCl

Polyaniline (PANi), poly(2-chloroaniline) (PClANi), and poly(aniline-co-2-chloroaniline) (co-PClANi) films were synthesized by electrochemical deposition on 304-stainless steel (SS) from an acetonitrile solution. The structural properties of these polymer films were characterized by spectroscopic (FTIR and UV–vis) and electrochemical (cyclic voltammetry) methods. Open circuit potential–time (E_ocp–time) curves, potentiodynamic polarization, and electrochemical impedance (EIS) measurements showed that these films have significant protective performance against corrosion of SS in 0.5 M HCl solution. It was found that co-PClANi film has acted as a passivator as well as barrier for cathodic reduction reaction in a similar manner as PANi film. However, PClANi film has behaved only as barrier for corrosion protection of SS in 0.5 M HCl.     

Corrosion protective poly(o-ethoxyaniline) coatings on copper

Poly(o-ethoxyaniline) (POEA) coatings were synthesized on copper (Cu) by electrochemical polymerization of o-ethoxyaniline in aqueous salicylate solution by using cyclic voltammetry. These coatings were characterized by cyclic voltammetry, UV-vis absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The performance of POEA as protective coating against corrosion of Cu in aqueous 3% NaCl was assessed by the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results of the potentiodynamic polarization and EIS studies demonstrate that the POEA coating has ability to protect the Cu against corrosion. The corrosion potential was about 0.330 V versus SCE more positive in aqueous 3% NaCl for the POEA coated Cu than that of uncoated Cu and reduces the corrosion rate of Cu almost by a factor of 140.     

Corrosion of similar and dissimilar metal crevices in the engineered barrier system of a potential nuclear waste repository

Crevice corrosion is considered possible if the corrosion potential (E_corr) exceeds the repassivation potential for crevice corrosion (E_rcrev). In this study, potentiodynamic polarization and potentiostatic hold were used to determine the E_rcrev of similar and dissimilar metal crevices in the engineered barrier system of the potential Yucca Mountain repository in 0.5 M NaCl, 4 M NaCl, and 4 M MgCl₂ solutions at 95 °C. The results were compared with data previously obtained using crevices formed between Alloy 22 and polytetrafluoroethylene. It was observed that, except for Type 316L stainless steel, all other metal-to-metal crevices were less susceptible to crevice corrosion than the corresponding metal-to-polytetrafluoroethylene crevices. Measurements of galvanic coupling were used to evaluate the crevice corrosion propagation behavior in 5 M NaCl solution at 95 °C. The crevice specimens were coupled to either an Alloy 22 or a Titanium Grade 7 plate using metal or polytetrafluoroethylene crevice washers. Crevice corrosion of Type 316L stainless steel propagated without repassivation. For all the tests using a polytetrafluoroethylene crevice washer, crevice corrosion of Alloy 22 was initiated at open circuit potential by the addition of CuCl₂ as an oxidant, whereas no crevice corrosion of Alloy 22 was initiated for all the tests using Alloy 22 or Titanium Grade 7 metals as crevice washer. However, crevice corrosion propagation was found to be very limited under such test conditions.     

The inhibition of low carbon steel corrosion in hydrochloric acid solutions by succinic acid: Part I. Weight loss, polarization, EIS, PZC, EDX and SEM studies

The effect of succinic acid (SA) on the corrosion inhibition of a low carbon steel (LCS) electrode has been investigated in aerated non-stirred 1.0 M HCl solutions in the pH range (2-8) at 25 °C. Weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behaviour in the absence and presence of different concentrations of SA under the influence of various experimental conditions. Measurements of open circuit potential (OCP) as a function of time till steady-state potentials (E_st) were also established. Surface analysis using energy dispersive X-ray (EDX) and scanning electron microscope (SEM) allowed us to clarify the mechanistic aspects and evaluate the relative inhibition efficiency. Results obtained showed that SA is a good “green” inhibitor for LCS in HCl solutions. The polarization curves showed that SA behaves mainly as an anodic-type inhibitor. EDX and SEM observations of the electrode surface confirmed existence of a protective adsorbed film of the inhibitor on the electrode surface. The inhibition efficiency increases with increase in SA concentration, pH of solution and time of immersion. Maximum inhibition efficiency (≈97.5%) is obtained at SA concentrations >0.01 M at pH 8. The effect of SA concentration and pH on the potential of zero charge (PZC) of the LCS electrode in 1.0 M HCl solutions has been studied and the mechanism of adsorption is discussed. Results obtained from weight loss, polarization and impedance measurements are in good agreements.     

Adsorption and corrosion inhibition behaviour of N-(phenylcarbamothioyl)benzamide on mild steel in acidic medium

Corrosion inhibition property of N-(phenylcarbamothioyl)benzamide (PCB) on mild steel in 1.0 M HCl solution has been investigated using chemical (weight loss method) and electrochemical techniques (potentiodynamic polarization and AC impedance spectroscopy). The inhibition efficiencies obtained from all the methods are in good agreement. The thiourea derivative is found to inhibit both anodic and cathodic corrosion as evaluated by electrochemical studies. The inhibitor is adsorbed on the mild steel surface according to Langmuir adsorption isotherm. The adsorption mechanism of inhibition was supported by spectroscopic (UV-visible, FT-IR, XPS), and surface analysis (SEM-EDS) and adsorption isotherms. The thermodynamic parameter values of free energy of adsorption (ΔG_ads) reveals that inhibitor was adsorbed on the mild steel surface via both physisorption and chemisorption mechanism.     

Investigation of the corrosion protection of SiOx-like oxide films deposited by plasma-enhanced chemical vapor deposition onto carbon steel

The paper reports on the corrosion behavior of carbon steel coated with thin SiO_x-like oxide films. The SiO_x-like coatings were deposited by plasma-enhanced chemical vapor deposition (PECVD) and their thickness was varied between 20 and 200 nm. The coated carbon steel interfaces were investigated for their corrosion protection efficiency when immersed in an aqueous saline solution of 3% NaCl. FTIR measurements and electrochemical impedance spectroscopy (EIS) experiments revealed that thin SiO_x-like coating layers (20 nm thick) do not prevent the carbon steel from corrosion, while thicker silica layers (d ≥ 100 nm) protect efficiently carbon steel interfaces in highly saline media with a protection efficiency of about 96% for a 200 nm thick coating.     

Corrosion performance of chemically synthesized poly(aniline-co-o-toluidine) copolymer coating on mild steel

A soluble copolymer from aniline and o-toluidine [poly(aniline-co-o-toluidine)] was synthesized by chemical oxidative copolymerization using ammonium persulphate as an oxidant in hydrochloride aqueous medium. The resultant copolymer was characterized by Fourier Transform Infrared (FTIR) spectroscopy and chemically deposited on mild steel specimens using N-methyl-2-pyrrolidone (NMP) as solvent via solution evaporation method. The anticorrosive properties of copolymer coating was investigated in major corrosive environments, such as 0.1 M HCl, 5% NaCl solution, artificial seawater, distilled water and open atmosphere by conducting various corrosion tests which include: immersion test, open circuit potential (OCP) measurements, potentiodynamic polarization measurements and atmospheric exposure test. The corrosion performance of copolymer coating was also compared separately with polyaniline (PANi) and poly(o-toluidine) (POT) homopolymer coatings. The surface morphologies of polymer coatings were evaluated using scanning electron microscopy (SEM). The synthesized copolymer exhibited excellent protection against mild steel corrosion; the protection efficiency being in the range of 78–94% after 30 days of immersion. The corrosion performance of copolymer in 5% NaCl and artificial seawater was comparable, which was only marginally better than in 0.1 M HCl. In general, the performance of copolymer coating was found to be better than that of homopolymer coatings.     

Amperometric ascorbate sensor based on conducting polymer: Poly(N-methylaniline) versus polyaniline

Electrocatalytic oxidation of ascorbate (vitamin C) at poly(N-methylaniline) modified electrode has been studied and compared with that proceeding at polyaniline modified sensor. A sigmoid-shaped anodic current transient as a response to addition of ascorbate was found for polyaniline modified electrode in pH-neutral solution, whereas a ‘normal-shaped’ current transient was found to be characteristic for poly(N-methylaniline) modified electrode. Based on this, a hypothesis on the autocatalytic mechanism for electrochemical oxidation of ascorbate was confirmed. It has been shown that poly(N-methylaniline) modified electrode can be used as an amperometric ascorbate sensor, operating in slightly acidic or pH-neutral buffer solutions at a controlled potential of 0.1-0.5 V versus Ag/AgCl, and the dependencies of current response on ascorbate concentration, the thickness of a polymer layer, and operating potential have been analyzed.     

Electrosynthesis of PAni/PPy coatings doped by phosphotungstate on mild steel and their corrosion resistances

Polyaniline/polypyrrole (PAni/PPy), polyaniline-phosphotungstate/polypyrrole (PAni-PW₁₂/PPy) and PAni/PPy-PW₁₂ have been successfully electrodeposited on mild steel (MS) by cyclic voltammetry in aqueous oxalic acid solutions. It was found that the incorporation of PW₁₂ enhanced the corrosion resistance of PAni/PPy coating. Moreover, in comparison to PAni-PW₁₂/PPy, PAni/PPy-PW₁₂ coating exhibited better corrosion resistance for mild steel. After immersion of 36 h in 0.1 M HCl, for instance, the polarization resistance of PAni/PPy-PW₁₂ coating reached 1695 Ω cm², more than those of both PAni/PPy and PAni-PW₁₂/PPy.     

Corrosion inhibition by poly(N-ethylaniline) coatings of mild steel in aqueous acidic solutions

Poly(N-ethylaniline) (PNEA) coatings on mild steel have been electrodeposited from 0.1 to 0.5 M aqueous oxalic acid solutions containing 0.1 M N-ethylaniline (NEA) using potentiodynamic synthesis technique. The effect of oxalic acid concentration on the corrosion behavior of PNEA coated mild steel surfaces were investigated by DC polarization and electrochemical impedance spectroscopy (EIS) techniques in 0.1 M HCl and 0.05 M H₂SO₄ solutions. Corrosion test results showed that corrosion resistance of PNEA coatings decreases with increasing concentrations of oxalic acid in polymerization solution. Decreasing acidity of the polymerization solution causes more effective protection against corrosion in aqueous acidic corrosive medium.     

Effects of nanocrystallization on the corrosion behavior of 309 stainless steel

Nanocrystallized (NC) 309 stainless steel (309SS) coating has been fabricated on glass substrate by DC magnetron sputtering. The coating, with an average grain size less than 50 nm, had ferritic (bcc) structure rather than the austenitic (fcc) structure of the bulk steel. The electrochemical corrosion behavior of the NC coating and the bulk steel in solutions of 0.25 M Na₂SO₄ + 0.05 M H₂SO₄ and 0.5 M NaCl + 0.05 M H₂SO₄ was investigated by using potentiodynamic polarization, potentiostatic polarization and AC impedance techniques. The results showed that the corrosion behavior of the NC 309SS coating and 309SS bulk steel depended on the composition of the solutions. In the Na₂SO₄ solution there was only a little difference between the corrosion resistance of the passive films on the NC coating and the bulk steel. However, in the solution with chloride ions, the localized corrosion resistance of 309SS was greatly enhanced by nanocrystallization due to the formation of a compact and stable passive film on the NC coating. The electronic structure of the passive film formed on the NC coating and on the bulk steel was analyzed by means of capacitance measurements, and a corrosion mechanism is proposed.