非奇异终端滑模控制系统的设计方法

提出一种全局非奇异终端滑模控制器，可用于带有参数不确定和外部扰动的二阶非线性系统，证明了系统从任意初始状态到达滑模的时间和在滑模上到达平衡点的时间均为有限，分析了终端滑模控制用于不确定性系统的跟踪精度，推导了系统跟踪精度和用于消除抖振的饱和函数宽度之间的数学关系，根据给定的跟踪精度，可设计出合适的饱和函数，仿真结果证明了所提出方法的有效性。     

Adaptive sliding mode trajectory tracking control for wheeled mobile robots

This paper discusses the problem of adaptive sliding mode trajectory tracking control for wheeled mobile robots in the presence of external disturbances and inertia uncertainties. A new fast nonsingular terminal sliding mode surface without any constraint is proposed, which not only avoids singularity, but also retains the advantages of sliding mode control. In order to implement the trajectory tracking mission, the error dynamic system is divided into a second-order subsystem and a third-order one. First, an adaptive fast nonsingular terminal sliding mode control law of the angular velocity is constructed for stabilising the second-order subsystem in finite time. Then, another adaptive fast nonsingular terminal sliding mode control law of the linear velocity is designed to guarantee the stability of the third-order subsystem. Finally, a simulation example is provided to demonstrate the validity of the proposed control scheme.     

Finite-time attitude tracking control for a rigid spacecraft using time-varying terminal sliding mode techniques

This paper investigates the finite-time attitude tracking control for a rigid spacecraft in the presence of inertia uncertainties and external disturbances. Two novel time-varying terminal sliding mode control algorithms are derived for attitude tracking control system. The proposed two control algorithms not only eliminate the reaching phase of the conventional sliding mode control but also guarantee the tracking errors converge to zero in finite time. Moreover, the singularity problem can be avoided. Simulation results are provided to demonstrate the effectiveness of the proposed design methods.     

Dynamics and control of a novel 3-DOF parallel manipulator with actuation redundancy

This paper deals with the dynamics and control of a novel 3-degrees-of-freedom （DOF） parallel manipulator with actuation redundancy. According to the kinematics of the redundant manipulator, the inverse dynamic equation is formulated in the task space by using the Lagrangian formalism, and the driving force is optimized by utilizing the minimal 2-norm method. Based on the dynamic model, a synchronized sliding mode control scheme based on contour error is proposed to implement accurate motion tracking control. Additionally, an adaptive method is introduced to approximate the lumped uncertainty of the system and provide a chattering-free control. The simulation results indicate the effectiveness of the proposed approaches and demonstrate the satisfactory tracking performance compared to the conventional controller in the presence of the parameter uncertainties and un-modelled dynamics for the motion control of manipulators.     

单喷泵无人滑行艇航向的反步自适应滑模控制

针对单泵喷水推进型无人滑行艇航向跟踪的非线性系统控制问题,对无人滑行艇的运动稳定性分析表明,其具有水平面内的自动稳定性.考虑建模误差和外界干扰力影响下的滑行艇运动响应模型,基于backstepping方法和滑模控制理论,提出了一种自适应滑模控制律.利用Lyapunov函数,证明该控制律保证了航向跟踪系统的全局渐近稳定性.仿真对比结果验证了所提出控制器的有效性.     

Adaptive Terminal Sliding Mode Control for Motion Tracking of a Micropositioning System

This paper presents the design of a novel adaptive terminal sliding mode controller (ATSMC) and its application to motion tracking control of a piezoelectric‐driven micropositioning system. A nonsingular terminal sliding surface is used to achieve fast and finite‐time convergence for the trajectory tracking, and also to avoid the singularity phenomenon in traditional terminal sliding mode design. An adaptive gain law is developed to update the gain of the proposed controller and to provide stable and chattering‐free control action. The stability of the control system has been demonstrated in the sense of Lyapunov. The ATSMC scheme is established based on the output feedback only, which does not require a state observer and facilitates an easy implementation. The proposed controller is implemented on a field‐programmable gate array (FPGA) platform. Comparison study with three conventional controllers has been conducted. Experimental results show the feasibility and effectiveness of the proposed control strategy.     

Nonsmooth finite-time control of uncertain second-order nonlinear systems

Nonsmooth finite-time stabilizing control laws have been developed for the double integrator system. The objective of this paper is to further explore the finite-time tracking control problem of a general form of uncertain second-order affine nonlinear system with the new forms of terminal sliding mode (TSM). Discontinuous and continuous finite-time controllers are also developed respectively without the singularity problem. Complete robustness can be acquired with the former, and enhanced robustness compared with the conventional boundary layer method can be expressed as explicit bounded function with the latter. Simulation results on the stabilizing and tracking problems are presented to demonstrate the effectiveness of the control algorithms.     

Unified nonsingular tracking and stabilization controller design for unicycle-type wheeled mobile robots

A unified, singularity-avoidant controller which enables simultaneous trajectory tracking and posture stabilization of unicycle-type wheeled mobile robots is proposed. The design scheme is based on phase portrait analysis, dynamic feedback linearization and sliding mode control. Path planning via phase portrait analysis plays a key role in choosing the control parameters and the initial value of the extended state in avoiding any singularity. Simulation results on posture stabilization as well as an eight-shaped trajectory tracking are presented to demonstrate the performance of the proposed controller.     

Nonsmooth finite-time control of uncertain second-order nonlinear systems

Nonsmooth finite-time stabilizing control laws have been developed for the double integrator system. The objective of this paper is to further explore the finite-time tracking control problem of a general form of uncertain second-order affine nonlinear system with the new forms of terminal sliding mode (TSM). Discontinuous and continuous finite-time controllers are also developed respectively without the singularity problem. Complete robustness can be acquired with the former, and enhanced robustness compared with the conventional boundary layer method can be expressed as explicit bounded function with the latter. Simulation results on the stabilizing and tracking problems are presented to demonstrate the effectiveness of the control algorithms.     

基于RBF神经网络的作业型AUV自适应终端滑模控制方法及实验研究

研究了作业型AUV （自主水下机器人）的轨迹跟踪控制问题.实际作业中,水下机械手展开作业过程将引起AUV动力学性能变化,进而影响AUV轨迹跟踪控制;并且水流环境干扰亦将影响AUV轨迹跟踪控制.针对上述AUV轨迹跟踪控制问题,提出一种基于RBF （径向基函数）神经网络的AUV自适应终端滑模运动控制方法.该方法在李亚普诺夫稳定性理论框架下,采用RBF网络对机械手展开引起的AUV动力学性能变化和水流环境干扰进行在线逼近,并结合自适应终端滑模控制器对神经网络权值和AUV控制参数进行自适应在线调节.通过李亚普诺夫稳定性理论,证明AUV系统轨迹跟踪误差一致稳定有界.针对滑模控制项引起的控制量抖振问题,提出一种变滑模增益的饱和连续函数滑模抖振降低方法,以降低滑模控制量抖振.通过AUV实验样机的艏向和垂向的轨迹跟踪实验,验证了本文AUV系统控制方法和滑模降抖振方法的有效性.     

Motion Control of Rigid Robot Manipulators via First and Second Order Sliding Modes

A motion control strategy for rigid robot manipulators based on sliding mode control techniques and the compensated inverse dynamics method is presented in this paper. The motivation for using sliding mode mainly relies on its appreciable features, such as simplicity and robustness versus matched uncertainties and disturbances. Furthermore the proposed approach avoids the estimation of the time-varying inertia matrix. As a preliminary step a first order sliding mode control law is presented. Then a second order strategy is discussed. In both cases the problem of chattering, typical of sliding mode control, is suitably circumvented. Simulations results demonstrates the good tracking properties of the proposed control strategy.     

基于Sigmoid函数的机器人鲁棒滑模跟踪控制系统设计

为了保证机器人能够在保持稳定的情况下,按照规划轨迹执行工作任务,从硬件和软件两个方面,设计了基于Sigmoid函数的机器人鲁棒滑模跟踪控制系统。装设机器人传感器与状态观测器,改装机器人鲁棒滑模跟踪控制器,完成系统硬件设计;综合机器人结构、运动机理和动力机制3个方面,构建机器人数学模型;根据状态数据采集结果与规划轨迹之间的偏差,计算机器人跟踪控制量;依据滑模运动与切换方程,利用Sigmoid函数生成机器人鲁棒滑模控制律,将生成控制指令作用在机器人执行元件上,实现系统的鲁棒滑模跟踪控制功能;在系统测试与分析中,所设计控制系统的平均位置跟踪控制误差为0.93 mm,与设定轨迹目标基本重合,机器人姿态角跟踪控制误差为0.06 mm,具有较好的鲁棒滑模跟踪控制效果,能够有效提高机器人鲁棒滑模跟踪控制精度。     

工作空间坐标下操作器的运动规划与控制

本文针对操作器的工作空间坐标下轨线跟踪,提出了直接利用跟踪误差进行规划和控制的设计方案.这一规划方案基于速度矢量的线性合成原理.同时借助于定义一个偏差超平面,利用滑动模控制的思想,将原非线性规划问题转化为线性规划问题,特别适用于具有冗余自由度的操作器,并且不再要求操作器参数、定位等非常精确;而这一控制方案将规划过程统一于控制器之中,直接对跟踪误差进行控制,可以得到更加优秀的外部品质.     

基于滑模变结构控制的路径跟踪研究

为解决锅炉水冷壁磨损检测机器人的路径跟踪问题,提出了一种基于指数趋近律的滑模变结构控制的机器人路径跟踪方法。在水冷壁磨损检测机器人运动模型的基础上,进行路径跟踪误差分析,设计一种基于指数趋近律的滑模变结构控制器,再利用Lyapunov定理验证其收敛性,最后通过MATLAB软件模拟仿真,仿真结果表明该控制器可以克服误差,使位姿误差收敛至零。     

一种基于指数趋近律的非线性系统变结构轨迹跟踪控制新方法

针对多输入多输出二阶不确定非线性机械系统中轨迹跟踪控制的问题,提出一种新的基于指数趋近律的滑模变结构控制方法,用于提高系统的平稳性和快速性。在滑模变结构控制器设计过程中采用一种新的指数趋近律以改进闭环系统的暂态和稳态响应性能,使系统跟踪误差收敛速度加快,特别是减少轨迹跟踪误差到达滑模面的时间,同时提高了系统轨迹跟踪过程的平稳性。通过采用边界层方法消除滑模控制输入抖振问题,避免控制过程中执行器的频繁切换,进一步提高所提出滑模控制器在实际系统中的实用性。基于李雅普诺夫稳定性理论证明了闭环系统的稳定性和跟踪误差的收敛性。数值仿真验证了所提出的控制方法的有效性。     

基于自适应模糊滑模控制的船舶航向控制器设计

针对船舶运动系统中固有的非线性、模型不确定性和风、浪、流等的干扰.提出了自适应模糊滑模控制(AFSMC)策略解决船舶的航向控制问题.通过采用模糊逻辑系统逼近系统未知函数,将滑模控制技术与自适应模糊控制技术相结合,设计了船舶航向AFSMC控制器.在滑模边界层内应用PI (proportional-integral)控制代替滑模控制中的切换项,削弱了滑模控制带来的抖振现象.借助李亚普诺夫函数证明了船舶运动系统中的信号都一致有界并利用Barbalat引理证明了跟踪误差渐近收敛到零.在参数摄动和外界干扰情况下进行了航向保持与改变仿真试验,采用AFSMC控制器得到了与无摄动和无干扰情况下相似的输出响应.实验结果表明,所提控制器能有效地处理系统不确定性和外界干扰,控制性能良好,具有很强的鲁棒性.     

喷水推进型无人艇航向跟踪的反步自适应滑模控制*

针对单泵喷水推进型无人滑行艇的航向跟踪非线性系统,提出了一种反步自适应滑模控制方法。该系统由无人艇运动非线性响应模型和舵机伺服系统组成,并考虑运动响应模型的建模误差、外界干扰力等非匹配不确定性,利用全局微分同胚坐标变换将原系统变换为具有下三角特征的非线性系统。基于Backstepping方法和滑模控制理论,提出了一种自适应滑模控制律;利用Lyapunov函数,证明该控制律保证了航向跟踪系统的全局渐近稳定性。仿真对比结果验证了所提出控制器的有效性。     

基于扰动观测器补偿的机械臂非奇异快速终端滑模控制

针对机械臂系统在实际应用中存在的建模误差及未知扰动问题, 设计了一种基于扰动观测器的改进型非 奇异快速终端滑模控制策略. 通过扰动观测器准确估计系统存在的总扰动, 并设计恰当的非线性增益函数使扰动观 测误差指数收敛, 实现了对控制器的前馈补偿. 考虑到终端滑模存在的奇异性问题, 结合扰动观测器设计了非奇异 快速终端滑模控制器, 在保证跟踪误差有限时间收敛的同时抑制了滑模控制固有的抖振现象. 同时在控制器设计过 程中, 用fal函数代替sig函数有利于削弱滑模控制抖振, 提高系统稳定性及跟踪精度. 最后, 利用MATLAB软件进行 实验仿真, 验证了所设计控制器的有效性.     

A novel robust adaptive second-order sliding mode tracking control technique for uncertain dynamical systems with matched and unmatched disturbances

This paper investigates a robust adaptive second-order sliding mode control method for tracking problem of a class of uncertain linear systems with matched and unmatched disturbances. The fundamental idea of the suggested control method is that the discontinuous sign function is used for the time-derivative of the control signal and hence the smooth control input achieved after an integration process is continuous and removes the chattering problem. Using a PID sliding surface, the finite-time convergence of output tracking errors is obtained. The adaptive gain-tuning control law removes the necessity of gaining information about the upper bounds of the external disturbances. The control system is in the sliding mode and then, tracking errors converge to the origin in a finite time under the presence of the external disturbances. Simulation results on an uncertain numerical system and a turntable servo-system are presented to indicate the effectiveness and feasibility of the proposed scheme.     

Discrete time output feedback sliding mode tracking control for systems with uncertainties

This paper describes a method for designing discrete time static output feedback sliding mode tracking controllers for uncertain systems that are not necessarily minimum phase or of relative degree one. In this work, a procedure for realizing discrete time controllers via a particular set of extended outputs is presented for systems with uncertainties. The conditions for existence of a sliding manifold guaranteeing a stable sliding motion are given. A procedure to synthesize a control law that minimizes the effect of the disturbance on the sliding mode dynamics and the augmented outputs is given. The proposed control law is then applied to a benchmark aircraft problem taken from the literature that represents the lateral dynamics of a F‐14 aircraft under powered approach. Copyright © 2013 John Wiley & Sons, Ltd.