两亲性聚乙烯醇-b-聚苯乙烯嵌段共聚物的合成及表征

采用原子转移自由基聚合(ATRP)法合成了具有两亲性的聚乙烯醇-b-聚苯乙烯嵌段共聚物P(VA-b-St)。首先利用调聚反应制备了带三氯甲基端基的聚醋酸乙烯大分子引发剂。以联二吡啶作配体、氯化亚铜为催化剂,引发苯乙烯单体聚合,得到结构明确的P(VAc-b-St)嵌段共聚物,而后通过皂化反应将其水解,从而得到两亲性嵌段共聚物P(VA-b- St);产物采用FT-IR、1H NMR、GPC等方法进行结构表征。P(VA-b-St)在不同浓度溶剂中的自组装行为用TEM进行了观察,结果表明:P(VA-b-St)可在DMF溶剂中形成球状囊泡结构,其尺寸达到纳米级。     

聚(苯乙烯-co-丙烯腈)-b-聚苯乙烯两嵌段共聚物的合成

以CuBr／N，N，N’，N’，N'-五甲基二亚乙基三胺(简称NNN)为催化体系，研究了原子转移自由基聚合法(ATRP)PS-b-P(S-co-AN)两嵌段聚合物的合成。研究了聚合顺序对相对分子质量及其分布和嵌段效率的影响，并且用聚合物末端C—Br键的断裂能对实验结果进行了初步解释。     

聚甲基丙烯酸丁酯-b-聚硅氧烷-b-聚甲基丙烯酸丁酯三嵌段共聚物的合成及表征

以α，ω-二氯聚二甲基硅氧烷和2-溴-2-甲基丙烯酸-2′-羟乙酯为原料，制备了末端含有C-Br的聚二甲基硅氧烷(PDMS)；以此PDMS为大分子引发剂，CuCl和4,4′-二(5-壬基)-2，2′-联吡啶为催化剂，通过原子转移自由基聚合反应，制得摩尔质量和结构可控的聚甲基丙烯酸丁酯-b-聚硅氧烷-b-聚甲基丙烯酸丁酯三嵌段共聚物。并用IR、^1H NMR、DSC和GPC对共聚物的结构及聚合反应活性进行了表征。     

含8-羟基喹啉侧基二嵌段共聚物的合成

以8-羟基喹啉和甲基丙烯酸羟乙酯为原料,经一系列反应得到含8-羟基喹啉配体结构的甲基丙烯酸甲酯类单体（HQMA）,再利用可逆加成-断裂链转移（RAFT）法实现该单体的活性可控聚合,然后以此聚合产物为大分子RAFT试剂,与苯乙烯实现活性可控聚合得二嵌段共聚物,并用1H NMR和GPC对其进行了表征,确定了其组成和结构;研究了所得共聚物在四氢呋喃（THF）（作共溶剂）和甲苯（Tol）（作选择性溶剂）混合溶剂中的自组装行为,结果表明,当共溶剂（THF)和选择性溶剂(甲苯)的体积比为V(THF):V（甲苯）=5:5和V(THF):V（甲苯）=4:6时,形成的胶束是球形的,当V(THF):V（甲苯）=2:8形成的胶束是蠕虫状的。     

两亲嵌段共聚物的合成及其自组装研究进展

作者介绍了两亲嵌段共聚物的活性阴离子聚合、基团转移聚合、开环歧化聚合、活性阳离子聚合、活性／可控自由基聚合、缩聚法、嵌段共聚物化学改性法等合成方法,并对其自组装形成聚合物纳米胶束的制备方法、形成机理以及在药物控制释放领域的应用进行了综述,并对其未来发展趋势进行了展望。     

丙烯腈嵌段共聚物的合成及其自组装研究进展

综述了含聚丙烯腈(PAN)嵌段共聚物的合成方法及其在溶液中的自组装技术。对常用的活性自由基聚合方法,如原子转移自由基聚合(ATRP)、可逆加成断裂链转移(RAFT)聚合、氮氧自由基聚合(NMP)以及钴调介自由基聚合(CMRP)等方面的研究进行了总结,同时对PAN类嵌段共聚物在溶液中的自组装技术进行了概括。最后提出了现有技术存在的问题,并对其今后发展方向进行了展望。     

嵌段共聚物的合成及其组装行为

嵌段共聚物在选择性溶剂中可逆缔合形成以不溶性链段为核 ,溶解性链段为壳的胶束。广泛用作表面活性剂、增溶剂、药物载体和纳米材料等。综述了嵌段共聚物的合成方法 ,着重分析了浓度、温度、嵌段长度、溶剂、添加物及电荷等因素对嵌段共聚物在选择性溶剂中组装行为的影响及其形成机理。展望了嵌段共聚物组装行为的应用前景     

用三嵌段共聚物作增容剂改善聚偏氟乙烯与聚苯乙烯的相容性

在Haake密炼机中进行聚偏氟乙烯与聚苯乙烯的熔融共混,发现含嵌段共聚物的共混体系的最大转矩显著下降。用扫描电子显微镜观察了共混物冷冻断裂面的形态,结果表明合成的三嵌段共聚物对共混物起到了良好的增容作用。     

侧链带有手性基团的聚半胱氨酸-b-聚环氧丙烷-b-聚半胱氨酸嵌段共聚物的合成

首次合成了侧链带有手性基团的聚半胱氨酸-b-聚环氧丙烷-b-聚半胱氨酸嵌段共聚物。首先炔丙基溴和L-半胱氨酸反应,合成了S-炔丙基-L-半胱氨酸,产物与三光气反应,合成S-炔丙基-N-羧基-L-半胱氨酸-环内酸酐(NCA);然后用大分子引发剂双端氨基聚环氧丙烷引发S-炔丙基-N-羧基-L-半胱氨酸-环内酸酐(NCA)开环聚合,制得了聚环氧丙烷-聚(S-炔丙基-L-半胱氨酸)嵌段共聚物;最后由N3-L-亮氨酸与共聚物侧链上的炔键发生Click反应,制得了侧链连有手性基团的嵌段共聚物。用1H NMR、IR、GPC和元素分析等方法对所得嵌段聚合物结构进行了表征。     

聚醚酰胺嵌段共聚物的合成及表征

采用熔融缩聚法合成了聚酰胺(PA)6/聚四氢呋喃(PTEMG)嵌段共聚物,研究了PA6、PTEMG链段的相对分子质量、含量对嵌段共聚物热性能的影响,通过傅立叶变换红外光谱、核磁共振、差示扫描量热、热重测试等对产物进行分析.结果表明,嵌段共聚物以羧基封端,当PA6、PTEMG链段相对分子质量分别为2 000、1 000时,共聚物的分子序列长度最长,相对分子质量最大;PTEMG链段相对分子质量越小,共聚物的熔点越低;PTEMG链段相对分子质量相同时,随PA6链段相对分子质量的增加,熔点升高;嵌段共聚物中PA6组分的熔融温度范围随着PTEMG含量的增加而逐步变宽;共聚物具有较高的热分解活化能.     

聚偏氟乙烯-b-聚乙烯基吡咯烷酮嵌段共聚物的制备和结构

以C₆F₁₃I为链转移剂,通过碘转移乳液聚合制得碘封端的聚偏氟乙烯（PVDF-I）,再以PVDF-I为大分子链转移剂进行N-乙烯基吡咯烷酮碘转移溶液聚合,得到聚偏氟乙烯-b-聚乙烯基吡咯烷酮（PVDF-b-PVP）两亲性嵌段共聚物;采用NMR、IR、XRD、DSC和AFM等对PVDF-b-PVP嵌段共聚物的分子和相态结构进行了表征。发现PVP能有效嵌入PVDF与末端碘之间,PVDF嵌段PVP后,PVDF分子链的有序度明显降低,产生γ晶型PVDF,同时结晶温度和结晶度降低。PVDF-b-PVP嵌段共聚物表现微相分离结构,相分离尺寸约20 nm,其亲水性也优于PVDF均聚物。     

Synthesis and characterization of poly(dimethyl siloxane) containing poly(vinyl pyrrolidinone) block copolymers

ABA‐type block copolymers containing segments of poly(dimethyl siloxane) and poly(vinyl pyrrolidinone) were synthesized. Dihydroxyl‐terminated poly(dimethyl siloxane) was reacted with isophorone diisocyanate and then with t‐butyl hydroperoxide to obtain macroinitiators having siloxane units. The peroxidic diradical macroinitiators were used to polymerize vinyl pyrrolidinone monomer to synthesize ABA‐type block copolymers. By use of physicochemical methods, the structure was confirmed, and its characterization was accomplished. Mechanical and thermal characterizations of copolymers were made by stress–strain tests and differential scanning calorimetric measurements. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1915–1922, 1999     

Synthesis and characterization of poly(oxyethylene)–poly(caprolactone) multiblock copolymers

Novel poly(oxyethylene)/poly(caprolactone) POE/PCL copolymers were synthesized by step growth polymerization of poly(ε-caprolactone) diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. The reaction was performed at room temperature and yielded multiblock copolymers with predetermined POE and PCL block lengths. The resulting copolymers were characterized by various analytical techniques including SEC, IR, ¹H NMR, DSC and X-ray diffractometry. Data showed that the properties of these polymers can be modulated by adjusting the chain lengths of the macromonomers. In particular, one or two crystalline structures can exist within the copolymers of various crystallinities. © 1998 SCI.     

Synthesis of block copolymers with thermodynamically compatible chain segments: di‐ and triblock copolymers of polystyrene and poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Mono‐ and bifunctional poly(phenylene oxide) (PPO) macroinitiators for atom transfer radical polymerization (ATRP) were prepared by esterification of mono‐ and bishydroxy telechelic PPO with 2‐bromoisobutyryl bromide. The macroinitiators were used for ATRP of styrene to give block copolymers with PPO and polystyrene (PS) segments, namely PPO‐block‐PS and PS‐block‐PPO‐block‐PS. Various ligands were studied in combination with CuBr as ATRP catalysts. Kinetic investigations revealed controlled polymerization processes for certain ligands and temperature ranges. Thermal analysis of the block copolymers by means of DSC revealed only one glass transition temperature as a result of the compatibility of the PS and PPO chain segments and the formation of a single phase; this glass transition temperature can be adjusted over a wide temperature range (ca 100–199 °C), depending on the composition of the block copolymer. Copyright © 2005 Society of Chemical Industry     

Comparison of micelles formed by amphiphilic poly(ethylene glycol)‐b‐poly(trimethylene carbonate) star block copolymers

In this article, we describe the synthesis and solution properties of PEG‐b‐PTMC star block copolymers via ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) monomer initiated at the hydroxyl end group of the core PEG using HCl Et₂O as a monomer activator. The ROP of TMC was performed to synthesize PEG‐b‐PTMC star block copolymers with one, two, four, and eight arms. The PEG‐b‐PTMC star block copolymers with same ratio of between hydrophobic PTMC and hydrophilic PEG segments were obtained in quantitative yield and exhibited monomodal GPC curves. The amphiphilic PEG‐b‐PTMC star block copolymers formed spherical micelles with a core–shell structure in an aqueous phase. The mean hydrodynamic diameters of the micelles increased from 17 to 194 nm with increasing arm number. As arm number increased, the critical micelle concentration (CMC) of the PEG‐b‐PTMC star block copolymers increased from 3.1 × 10^?3 to 21.1 × 10^?3 mg/mL but the partition equilibrium constant, which is an indicator of the hydrophobicity of the micelles of the PEG‐b‐PTMC star block copolymers in aqueous media, decreased from 4.44 × 10⁴ to 1.34 × 10⁴. In conclusion, we confirmed that the PEG‐b‐PTMC star block copolymers form micelles and, hence, may be potential hydrophobic drug delivery vehicles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of hydrophilic segmented block copolymers based on poly(ethylene oxide)‐ran‐poly(propylene oxide)

The present article discusses the synthesis and various properties of segmented block copolymers with random copolymer segments of poly(ethylene oxide) and poly(propylene oxide) (PEO‐r‐PPO) together with monodisperse amide segments. The PEO‐r‐PPO contained 25 wt % PPO units and the segment presented a molecular weight of 2500 g/mol. The synthesized copolymers were analyzed by differential scanning calorimetry, Fourier transform infra‐red spectroscopy, atomic force microscopy and dynamic mechanical thermal analysis. In addition, the hydrophilicity and the contact angles (CAs) were studied. The PEO‐r‐PPO segments displayed a single low glass transition temperature, as well as a low PEO crystallinity and melting temperature, which gave enhanced low‐temperature properties of the copolymer. The water absorption values remained high. In comparison to mixtures of PEO/PPO segments, the random dispersion of PPO units in the PEO segments was more effective in reducing the PEO crystallinity and melting temperature, without affecting the hydrophilicity. Increasing the polyether segment length with terephthalic groups from 2500 to 10,000 g/mol increased the hydrophilicity and the room temperature elasticity. Furthermore, the CAs were found to be low 22–39° and changed with the crosslink density. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117:1394–1404, 2010     

含聚乙二醇的嵌段共聚物的合成及自组装研究进展

综述了通过活性自由基聚合如原子转移自由基聚合（ATRP）、氮氧稳定自由基聚合（NMP）、可逆加成断裂链转移聚合（RAFT）等方法合成含聚乙二醇（PEG）的嵌段共聚物的研究进展,并对含PEG类嵌段共聚物在溶液中的自组装技术和在药物载体、介孔材料以及碳纳米管中的应用进行了归纳,指出含PEG的嵌段共聚物可以自组装成多种形貌,直接影响材料的性能和应用,所以这些结构有潜在的应用价值和应用前景,并且合成新的含PEG的嵌段共聚物和开发具有新型结构、形貌可控的自组装体以及新的应用领域是今后的一个热点问题,具有重要的科学研究意义和实际应用价值。     

新型药物载体聚乙烯-聚丙交酯载药颗粒的制备及表征

Methoxy poly （ethylene glycol） -poly （D, L-lactide） block copolymers （PEG-PLA） were prepared through ring-opening polymerization. The oil in water suspension method was used to prepare block copolymer micelles. The critical micelle concentration （CMC） by fluorescence spectroscopy was 0. 0056 mg· ml^- 1. The physical state of the inner core region of micelles was characterized with ^1 HNMR. The size of indomethacin （IMC） loaded micelles measured by dynamic light scattering （DLS） showed narrow monodisperse size distribution and the average diameters were less than 50 nm. In addition, the nanoparticles with relatively high drug loading content （DLC） were obtained.     

Synthesis of multiblock copolymers of poly(2‐vinylpyridine) and polyoxyethylene

Telechelic dihydroxy poly(2‐vinylpyridine) (THPVP) samples with different molecular weights were synthesized by using lithium α‐methylnaphthalene as an anionic initiator in mixed solvents of benzene and tetrahydrofuran (THF). Then multiblock copolymers of poly(2‐vinylpyridine) (P2VP) and polyoxyethylene (PEO) were obtained by condensing THPVP and PEO with dichloromethane in the presence of potassium hydroxide. The effects of reaction time, molecular weight of PEO and THPVP, and raw meal ratio PEO/THPVP (w/w) were investigated. The best conditions were found. The copolymers can be purified by water and toluene. The purified copolymers were characterized by infrared (IR) and ¹H nuclear magnetic resonance (¹H‐NMR). The PEO segment content was calculated from the integral curve of ¹H‐NMR spectra. The results showed that these multiblock copolymers were connected through oxymethylene. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1632–1636, 2003