Synthesis and properties of poly(trimethylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) random copolyesters

Poly(trimethylene terephthalate‐co‐2‐methyl‐ ethylene terephthalate) random copolymers of various compositions were synthesized via traditional two‐step polycondensation by incorporating of 1,2‐propanediol. The molar composition of trimethylene terephthalate and 2‐methyl‐ethylene terephthalate units and chemical structure were confirmed by means of ¹H‐NMR and Fourier transform infrared. The thermal properties of the copolyesters were evaluated by DSC and TGA. As far as the thermal properties is concerned, the main effect of incorporation of 1,2‐propanediol was a lowering in the melting temperature, and an increment of glass transition temperature compared to homopolymer PTT. Due to the effect of the lateral methyl groups in the polymeric chain, the thermal stability is slightly decreased as the amount of the MET units is increased. Furthermore, the crystals of PTT/MET copolyesters were observed by hot‐stage optical polarizing microscopy at the indicated crystallization temperatures. As expected, the incorporation of MET units in the polymer chain of PTT was found to decrease the dimension of the crystals. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of poly(butylene terephthalate‐co‐triethylene terephthalate) copolyesters

Poly(butylene terephthalate‐co‐triethylene terephthalate) random copolymers of various compositions and molecular weights were synthesized in bulk and characterized in terms of their chemical structure and thermal and rheological properties. At room temperature all the copolymers were partially crystalline and showed good thermal stability. The main effect of copolymerization was a decrease in the melting and glass‐transition temperatures with respect to the poly(butylene tere‐ phthalate) homopolymer. The fusion temperatures were well correlated with the composition by the Baur equation and the equilibrium melting temperature and the heat of fusion extrapolated values for poly(butylene terephthalate) were in good agreement with those reported elsewhere. Triethylene terephthalate units were found to influence the rheological behavior in the melt, the viscosity being significantly higher than that of the poly(butylene terephthalate‐co‐diethylene terephthalate) copolymers investigated previously. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 981–990, 2001     

Preparation and thermal behavior of random poly(butylene terephthalate/azelate) copolyesters

Poly(butylene terephthalate), poly(butylene azelate), and poly(butylene terephthalate/butylene azelate) random copolymers of various compositions were synthesized in bulk using the well‐known two‐stage polycondensation procedure, and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. As far as the thermal stability is concerned, it was found to be rather similar for all copolymers and homopolymers investigated. All the copolymers were found to be partially crystalline, and the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to pure homopolymers. Flory's equation was found to describe the T_m–composition data and permitted to calculate the melting temperatures (T^°_m ) and the heats of fusion (ΔH_u) of both the completely crystalline homopolymers. Owing to the high crystallization rate, the glass transition was observable only for the copolymers containing from 30 to 70 mol % of the terephthalate units; even though the samples cannot be frozen in a completely amorphous state, the data obtained confirmed that the introduction of the aromatic units gave rise to an increase of T_g, due to a chain stiffening. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2694–2702, 1999     

Melting behavior and crystallization kinetics of poly(butylene terephthalate‐co‐diethylene terephthalate) and poly(butylene terephthalate‐co‐triethylene terephthalate) copolyesters

The melting behavior of poly(butylene terephthalate‐co‐diethylene terephthalate) and poly(butylene terephthalate‐co‐triethylene terephthalate) copolymers was investigated by differential scanning calorimetry after isothermal crystallization from the melt. Multiple endotherms were found for all the samples, and attributed to the melting and recrystallization processes. By applying the Hoffman‐Weeks' method, the equilibrium melting temperatures of the copolymers under investigation were obtained. Two distinct peaks in the crystallization exothermic curve were observed for all the samples. Both of them appeared at higher times than that of PBT, indicating that the introduction of a comonomer decreased the crystallization rate. The observed dependence of this latter on composition was explained on the basis of the content of ether–oxygen atoms in diethylene and triethylene terephthalate units, and of the different sizes of these units. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3545–3551, 2001     

Syntheses and characterization of poly(butylene terephthalate) copolyesters modified with p‐acetoxybenzoic acid

Poly(butylene terephthalate) (PBT) copolyesters modified with seven compositions of p‐acetoxybenzoic acid (PABA) ranging from 10 to 70 mol % were prepared. The X‐ray diffraction patterns, the polarizing microscopy behaviors, and thermal analysis showed that the modified PBT contained more PABA homopolymer units (PABA–PABA) than PBT–PABA units in the copolyesters. On increasing PABA mole percenage, PBT crystallinity decreased and thermal stability increased. It was found that although the PBT copolyesters did not exhibit a clear liquid crystalline texture like the copolyester of poly(ethylene terephthalate) modified with PABA did, the PBT copolyester containing 70 mol % of PABA exhibited the typical shear thinning behavior of a liquid crystalline polymer. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1085–1095, 2001     

Synthesis and thermal characterization of poly(butylene terephthalate-co-thiodiethylene terephthalate) copolyesters

Poly(butylene terephthalate-co-thiodiethylene terephthalate) copolymers of various compositions were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers under investigation show a good thermal stability. At room temperature they appear as semicrystalline materials: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to homopolymers. A pure crystalline phase has been evidenced at high content of butylene terephthalate or thiodiethylene terephthalate units and Baur's equation was found to describe well the T_m-composition data. Amorphous samples (containing 50-100 mol% of thiodiethylene terephthalate units) showed a monotonic decrease of T_g as the content of sulfur-containing units is increased, due to the presence of flexible C-S-C bonds in the polymeric chain. Finally, the Fox equation described well the T_g-composition data.     

Blends of poly(ethylene terephthalate) and poly(butylene terephthalate)

Commercial grade poly(ethylene terephthalate), (PET, intrinsic viscosity = 0.80 dL/g) and poly(butylene terephthalate), (PBT, intrinsic viscosity = 1.00 dL/g) were melt blended over the entire composition range using a counterrotating twin‐screw extruder. The mechanical, thermal, electrical, and rheological properties of the blends were studied. All of the blends showed higher impact properties than that of PET or PBT. The 50:50 blend composition exhibited the highest impact value. Other mechanical properties also showed similar trends for blends of this composition. The addition of PBT increased the processability of PET. Differential scanning calorimetry data showed the presence of both phases. For all blends, only a single glass‐transition temperature was observed. The melting characteristics of one phase were influenced by the presence of the other. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 75–82, 2005     

Synthesis and characterisation of copolyesters from poly(ethylene terephthalate) and poly(hexamethylene terephthalate)

Copolyesters containing poly(ethylene terephthalate) and poly(hexamethylene terephthalate) (PHT) were prepared by a melt condensation reaction. The copolymers were characterised by infrared spectroscopy and intrinsic viscosity measurements. The density of the copolyesters decreased with increasing percentage of PHT segments in the backbone. Glass transition temperatures (T_g). melting points (T_m) and crystallisation temperatures (T_c) were determined by differential scanning calorimetry. An increase in the percentage of PHT resulted in decrease in T_g, T_m and T_c. The as-prepared copolyesters were crystalline in nature and no exotherm indicative of cold crystallisation was observed. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in a nitrogen atmosphere. An increase in percentage of PHT resulted in a decrease in initial decomposition temperature. The rate of crystallisation of the copolymers was studied by small angle light scattering. An increase in percentage of PHT resulted in an increase in the rate of crystallisation.     

Crystallization kinetics of poly(1,4‐butylene‐co‐ethylene terephthalate)

The crystallization kinetics of poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and their copolymers poly(1,4‐butylene‐co‐ethylene terephthalate) (PBET) containing 70/30, 65/35 and 60/40 molar ratios of 1,4‐butanediol/ethylene glycol were investigated using differential scanning calorimetry (DSC) at crystallization temperatures (T_c) which were 35–90 °C below equilibrium melting temperature . Although these copolymers contain both monomers in high proportion, DSC data revealed for copolymer crystallization behaviour. The reason for such copolymers being able to crystallize could be due to the similar chemical structures of 1,4‐butanediol and ethylene glycol. DSC results for isothermal crystallization revealed that random copolymers had a lower degree of crystallinity and lower crystallite growth rate than those of homopolymers. DSC heating scans, after completion of isothermal crystallization, showed triple melting endotherms for all these polyesters, similar to those of other polymers as reported in the literature. The crystallization isotherms followed the Avrami equation with an exponent n of 2–2.5 for PET and 2.5–3.0 for PBT and PBETs. Analyses of the Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT and PET had higher growth rate constant G_o, and nucleation constant K_g than those of PBET copolymers. © 2001 Society of Chemical Industry     

Synthesis and characterization of poly[(butylene succinate)‐co‐(butylene terephthalate)]‐b‐poly(tetramethylene glycol) segmented block copolymer

Polyester‐polyether segmented block copolymers of poly[(butylene succinate)‐co‐poly(butylene terephthalate)] (PBS–PBT) and poly(tetramethylene glycol) (PTMG) (M_n = 2000) with various compositions were synthesized. PBT content in the PBS was adjusted to ca. 5 mol %. Their thermal and mechanical properties were investigated. In the case of copolymer, the melting point of the PBS–PBT control was 107.8°C, and the melting point of the copolymer containing 70 wt % of PTMG was 70.1°C. Crystallinity of soft segment was 5 ∼ 17%, and that of hard segment was 42 ∼ 59%. The breaking stress of the PBS–PTMG control was 47 MPa but it decreased with increasing PTMG content. In the case of copolymer containing 70 wt % of PTMG, breaking stress was 36 MPa. Contrary to the decreasing breaking stress, breaking strain increased from 300% for PBS–PBT control to 900% for a copolymer containing 70 wt % of PTMG. The shape recovery ratios of the copolymer containing 70 wt % PTMG were almost twice of those of copolymers containing 40 wt % PTMG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2067–2075, 2001     

Poly(ethylene terephthalate‐co‐isophthalate) copolyesters obtained from ethylene terephthalate and isophthalate oligomers

A series of poly(ethylene terephthalate‐co‐isophthalate) copolyesters containing upto 50%‐mole of isophthalic units were prepared by polycondensation from ethylene terephthalate and ethylene isophthalate fractions of linear oligomers containing from 5 to 6 repeating units in average. The polyesters were obtained in good yields and with high‐molecular‐weights. The microstructure of the copolyesters was studied as a function of reaction time by ¹³C‐NMR showing that a random distribution of the comonomers was achieved since the earlier stages of polycondensation. The melting temperature and enthalpy of the copolyesters decreased with the content of isophthalic units so that copolyesters containing more than 25% of these units were amorphous. Isothermal crystallization studies made on crystalline copolyesters revealed that the crystallization rate of copolyesters decreased with the content in isophthalic units. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and hydrophilicity of poly(butylene 2,6‐naphthalate)/poly(ethylene glycol) copolymers

Poly(butylene 2,6‐naphthalate) (PBN)/poly(ethylene glycol) (PEG) copolymers were synthesized by the two‐step melt copolymerization process of dimethyl‐2,6‐naphthalenedicarboxylate (2,6‐NDC) with 1,4‐butanediol (BD) and PEG. The copolymers produced had different PEG molecular weights and contents. The structures, thermal properties, and hydrophilicities of these copolymers were studied by ¹H NMR, DSC, TGA, and by contact angle and moisture content measurements. In particular, the intrinsic viscosities of PBN/PEG copolymers increased with increasing PEG molecular weights, but the melting temperatures (T_m)_, the cold crystallization temperatures (T_cc)_, and the heat of fusion (ΔH_f) values of PBN/PEG copolymers decreased on increasing PEG contents or molecular weights. The thermal stabilities of the copolymers were unaffected by PEG content or molecular weight. Hydrophilicities as determined by contact angle and moisture content measurements were found to be significantly increased on increasing PEG contents and molecular weights. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2677–2683, 2006     

Rheological and thermal properties of blends of modified poly(ethylene terephthalate) with p‐acetoxybenzoic acid and poly(butylene terephthalate)

Blending of thermotropic liquid crystalline polyesters (LCPs) with conventional polymers could result in materials that can be used as an alternative for short fiber‐reinforced thermoplastic composites, because of their low melt viscosity as well as their inherent high stiffness and strength, high use temperature, and excellent chemical resistance and low coefficient of expansion. In most of the blends was used LCP of 40 mol % of poly(ethylene terephthalate) (PET) and 60 mol % of p‐acetoxybenzoic acid (PABA). In this work, blends of several copolyesters having various PABA compositions from 10 to 70 mol % and poly(butylene terephthalate) (PBT) were prepared and their rheological and thermal properties were investigated. For convenience, the copolyesters were designated as PETA‐x, where x is the mol % of PABA. It was found that PET‐60 and PET‐70 copolyesters decreased the melt viscosity of PBT in the blends and those PBT/PETA‐60 and PBT/PETA‐70 blends showed different melt viscosity behaviors with the change in shear rate, while blends of PBT and PET‐x having less than 50 mol % of PABA exhibited totally different rheological behaviors. The blends of PBT with PETA‐50, PETA‐60, and PETA‐70 showed the morphology of multiple layers of fibers. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1797–1806, 1999     

The conformational changes,crystal structure and melting behavior of poly(ethylene/ trimethylene terephthalate) copolyesters

The conformational changes, crystal structure and melting behavior of poly(ethylene/trimethylene terephthalate) (ET) copolyesters were investigated using in situ Fourier transform infrared (FTIR) spectroscopy, wide‐angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) under isothermal crystallization conditions. The results show that the minimum melting temperature was observed in ET53, in which the relative amount of ethylene glycol (EG) to 1,3‐propanediol (PDO) was 52.68/47.32 and the PDO‐dimethyl terephthalate (DMT)‐PDO segments in the molecular chain dominated the crystal formation. The minimum crystallinity of ET copolyesters was found in ET66, in which the relative amount of EG/PDO was 65.91/34.09 and the EG‐DMT‐EG segments in the molecular chain dominated the crystal formation. A rapid and continuous conformational transition in ET copolyesters was observed using in situ FTIR in the first 10 min under isothermal crystallization conditions. The continuously adjusting conformation in the molecules reflects the crystallization of ET copolyesters. Based on the DSC and the X‐ray analyses of the crystallization behavior in the ET copolyesters, crystalline conformation transitions of molecules in ET copolyesters take place rapidly and early. Copyright © 2012 Society of Chemical Industry     

Melt‐electrospinning of poly(ethylene terephthalate) and polyalirate

Rodlike polymer samples were made from three kinds of poly(ethylene terephthalate) (PET) pellets with different intrinsic viscosities (IV), and from polyalirate (Vectra) pellets. PET and Vectra fibers were produced using a melt‐electrospinning system equipped with a CO₂‐laser melting device from these rodlike samples. The effects of IV value and laser output power on the fiber diameter of PET were investigated. Furthermore, the effect of the laser output power on the fiber diameter of Vectra was investigated. The crystal orientation of these produced fibers was also investigated by X‐ray photographs. The following conclusions were reached: (i) the diameter of PET fiber decreases with increasing laser output power; (ii) the minimum average diameter of PET fibers is scarcely influenced by the value of IV; (iii) the electrospun PET fibers show isotropic crystal orientation; (iv) fibers having an average fiber diameter smaller than 1 μm cannot be obtained from PET and Vectra using the system developed; and (v) preferred liquid crystal orientation can be seen in electrospun Vectra fibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Compatible and crystallization properties of poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) blends

Differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD) and dynamic mechanical analysis (DMA) properties of poly(lactic acid)/ poly(butylene adipate‐co‐terephthalate) (PLA/PBAT) specimens suggest that only small amounts of poor PLA and/or PBAT crystals are present in their corresponding melt crystallized specimens. In fact, the percentage crystallinity, peak melting temperature and onset re‐crystallization temperature values of PLA/PBAT specimens reduce gradually as their PBAT contents increase. However, the glass transition temperatures of PLA molecules found by DSC and DMA analysis reduce to the minimum value as the PBAT contents of PLA_xPBAT_y specimens reach 2.5 wt %. Further morphological and DMA analysis of PLA/PBAT specimens reveal that PBAT molecules are miscible with PLA molecules at PBAT contents equal to or less than 2.5 wt %, since no distinguished phase‐separated PBAT droplets and tan δ transitions were found on fracture surfaces and tan δ curves of PLA/PBAT specimens, respectively. In contrast to PLA, the PBAT specimen exhibits highly deformable properties. After blending proper amounts of PBAT in PLA, the inherent brittle deformation behavior of PLA was successfully improved. Possible reasons accounting for these interesting crystallization, compatible and tensile properties of PLA/PBAT specimens are proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of poly(ethylene isophthalate‐co‐ethylene terephthalate) copolyesters

Poly(ethylene isophthalate‐co‐ethylene terephthalate) (PEIPET) copolymers of various compositions and molecular weights were synthesized by melt polycondensation and characterized in terms of chemical structure and thermal and rheological properties. At room temperature, all copolymers were amorphous and thermally stable up to about 400°C. The main effect of copolymerization was a monotonic increase of glass transition temperature (T_g) as the content of ethylene terephthalate units increased. The Fox equation accurately describes the T_g–composition data. The presence of ethylene terephthalate units was found to influence rheological behavior in the melt, with the Newtonian viscosity increasing as the content of ethylene terephthalate units increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 186–193, 2004     

Modification of the thermal properties and crystallization behaviour of poly(ethylene terephthalate) by copolymerization

Poly(ethylene terephthalate) (PET) is a widely used polyester, which can be crystallized from the melt over a wide range of supercooling conditions or, alternatively, quenched into the amorphous state and, subsequently, crystallized by thermal treatment above the glass‐transition temperature. It is well known that the crystallization of PET can be hindered by means of copolymerization or reactive blending. The incorporation of comonomeric units into the polymer backbone leads to an irregular chain structure and thereby inhibits regular chain packing for crystallization. The crystallization of PET copolyesters is strongly influenced by the chain microstructure regarding comonomer distribution, randomness and length of the crystallizable ethylene terephthalate sequences. This paper is mainly devoted to the thermally induced crystallization behaviour of PET and to reviewing the efforts that have been made in the last decade to modify the glass‐transition and melting temperatures, the crystallinity and the crystallization rate of this polyester. Furthermore, some illustrative experimental data obtained from isothermal and non‐isothermal crystallization of PET are included in this study. © 2003 Society of Chemical Industry     

Melt characteristics,mechanical, and thermal properties of blown film from modified blends of poly(butylene adipate‐co‐terephthalate) and poly(lactide)

Blown films from poly(butylene adipate‐co‐terephthalate) and poly(lactide) (PLA) blends were investigated. The blends were prepared in a twin‐screw extruder, in the presence of small amounts of dicumyl peroxide (DCP). The influence of DCP concentration on film blowing, rheological, mechanical, and thermal properties of the blends is reported in this article. Rheological results showed a marked increase in polymer melt strength and elasticity with the addition of DCP. As a consequence, the film homogeneity and the stability of the bubble were improved. The modified blend films, compared with the unmodified blend, showed an improvement in tensile strength and modulus with a slight loss in elongation. Fourier transform infrared and gel results revealed that chain scission and branching were more significant than crosslinking when the DCP loadings in the blends were not higher than 0.7%. A reduction in melt temperatures of PLA was observed due to difficulty in chain crystallization. The concentrations of DCP strongly affected the melting temperatures but had an insignificant effect on the decomposition behavior of the blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011