pH‐sensitive swelling and release behaviors of anionic hydrogels for intelligent drug delivery system

The pH‐sensitive swelling and release behaviors of the anionic P(MAA‐co‐EGMA) hydrogels were investigated as a biological on–off switch for the design of an intelligent drug delivery system triggered by external pH changes. There was a drastic change of the equilibrium weight swelling ratio of P(MAA‐co‐EGMA) hydrogels at a pH of around 5, which is the pK_a of poly (methacrylic acid) (PMAA). At a pH below 5, the hydrogels were in a relatively collapsed state but at a pH higher than 5, the hydrogels swelled to a high degree. When the molecular weight of the pendent poly(ethylene glycol) (PEG) of the P(MAA‐co‐EGMA) increased, the swelling ratio decreased at a pH higher than 5. The pK_a values of the P(MAA‐co‐EGMA) hydrogels moved to a higher pH range as the pendent PEG molecular weight increased. When the feed concentration of the crosslinker of the hydrogel increased the swelling ratio of the P(MAA‐co‐EGMA) hydrogels decreased at a pH higher than 5. In release experiments using Rhodamine B (Rh‐B) as a model solute, the P(MAA‐co‐EGMA) hydrogels showed a pH‐sensitive release behavior. At low pH (pH 4.0) a small amount of Rh‐B was released while at high pH (pH 6.0) a relatively large amount of Rh‐B was released from the hydrogels. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Dynamic swelling behavior of pH‐sensitive anionic hydrogels used for protein delivery

There have been many attempts to use anionic hydrogels as oral protein delivery carriers because of their pH‐responsive swelling behavior. The dynamic swelling behavior of poly(methacrylic acid‐co‐methacryloxyethyl glucoside) and poly(methacrylic acid‐g‐ethylene glycol) hydrogels was investigated to determine the mechanism of water transport through these anionic hydrogels. The exponential relation M_t/M_∞ = ktⁿ (where M_t is the mass of water absorbed at time t and M_∞ is the mass of water absorbed at equilibrium) was used to calculate the exponent (n) describing the Fickian or non‐Fickian behavior of swelling polymer networks. The mechanism of water transport through these gels was significantly affected by the pH of the swelling medium. The mechanism of water transport became more relaxation‐controlled in a swelling medium of pH 7.0, which was higher than pK_a of the gels. The experimental results of the time‐dependent swelling behaviors of the gels were analyzed with several mathematical models. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1606–1613, 2003     

pH‐sensitive polymeric particles as smart carriers for rebar inhibitors delivery in alkaline condition

The waste problem of the rebar inhibitors is very serious due to that it is a long time before they can exert their best effect in the concrete and they are kept losing all the time. However, there is still no effective solution to alleviate such situation. Meanwhile, drug delivery control technology based on environmental sensitive polymers has been successfully applied in biomedical fields. Thus, poly(acrylic acid)–acrylamide was synthesized as smart carrier for controlling rebar inhibitors delivery in concrete. Dipotassium hydrogen phosphate as model drug was encapsulated inside the polymeric particles via a self‐assembly process. The pH‐responsive activities of the polymeric particles were estimated by monitoring their swelling performances in solutions of different pH values and the drug delivery control characteristics were studied in simulated concrete pore solutions. The results indicate the polymeric particles deserve network structures with high porosity and exhibit excellent pH‐responsive activities, which can perform as perfect intelligent carriers whereas the releasing of the inhibitors follows the first‐order kinetic law. The work suggests a new application field of drug delivery control technology. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45886.     

Core/shell pH‐sensitive micelles self‐assembled from cholesterol conjugated oligopeptides for anticancer drug delivery

A doxorubicin (DOX) delivery system of pH‐sensitive micelles self‐assembled from cholesterol conjugated His₅Arg₁₀ (HR15‐Chol) and His₁₀Arg₁₀ (HR20‐Chol) has been described in this article. The amphiphilic molecules have low critical micelle concentrations of 17.8 and 28.2 μg/mL for HR15‐Chol and HR20‐Chol, respectively, even at a low pH of 5.0. The pH‐sensitive histidine segment of the polypeptide block is insoluble at pH 7.4 but becomes positively charged and soluble via protonation at pH lower than 6.0. The size and zeta potential of DOX‐loaded micelles increases with the decrease in pH. Coarse‐grained simulations were performed to verify the structure of DOX‐loaded micelles and pH sensitivity of HR15/20‐Chol. The in vitro DOX release from the micelles is significantly accelerated by decreasing pH from 7.4 to 5.0. Furthermore, DOX release from the micelles is controlled by a Fickian diffusion mechanism. These micelles have great potential applications in delivering hydrophobic anticancer drugs for improved cancer therapy. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Polyhydroxyalkanoate‐based drug delivery systems

Microbial polyhydroxyalkanoates (PHAs) have been a subject of significant research interest in the past few decades. The recent development of novel functionalized PHAs has opened up new possibilities to combine the good biocompatibility of PHA‐based drug delivery systems to, for example, improve drug loading and release properties, targeting or imaging functionalities. This mini‐review presents some recent scientific developments in the preparation of functionalized PHAs, PHA–drug and PHA–protein conjugates, multifunctional PHA nanoparticles and micelles as well as biosynthetic PHA particles for drug delivery. These developments in combination with the generally excellent biocompatibility of PHA materials are expected to further expand the interest in PHA materials for drug delivery and other therapeutic applications. © 2016 Society of Chemical Industry     

Synthesis and characterization of cetirizine‐containing,pH‐sensitive acrylic acid/poly(vinyl alcohol) hydrogels

In this study, interpenetrated acrylic acid (AA)/poly(vinyl alcohol) (PVA) hydrogels were prepared by free‐radical polymerization with N,N‐methylene bisacrylamide (MBAAm) as a crosslinker. The basic structural parameters, such as the molecular weight between crosslinks, volume interaction parameter, number of crosslinks, Flory–Huggins solvent interaction parameter, and diffusion coefficient, were calculated. Cetirizine dihydrochloride was loaded as a model drug in selected samples. The prepared hydrogels were evaluated for swelling, sol–gel fraction, and porosity. The swelling of the AA/PVA hydrogels was found to be directly proportional to the pH, that is, 1.2–7.5, depending on composition. The percentage of cetirizine hydrochloride was found to be directly proportional to the buffer pH and was at its maximum at pH 7.5, that is, 90–95%, and its lowest at pH 1.2, that is, 20–30%. The gel fraction increased with increasing concentration of AA and MBAAm, whereas the porosity showed the same response with AA, but an inverse relationship was observed with MBAAm. The drug‐release data were fitted into various kinetics models, including the zero‐order, first‐order, Higuchi, and Peppas models, which showed non‐Fickian diffusion. The prepared hydrogels were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, and no interaction was found among the polymer ratio and the drug. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43407.     

Gelatin based pH‐sensitive hydrogels for colon‐specific oral drug delivery: Synthesis,characterization, and in vitro release study

Based on gelatin (Gltn) and acrylic acid (AAc), biodegradable pH‐sensitive hydrogel was prepared using gamma radiation as super clean source for polymerization and crosslinking. Incorporation of PAAc in the prepared hydrogel was confirmed by Fourier transform infrared spectroscopy (FTIR). The effect of PAAc content on the morphological structure of the prepared hydrogel swollen at pH 1, 5, and 7 was examined using scanning electron microscopy (SEM). The results showed the dependence of the porous structure of the prepared hydrogels on AAc content and the pH of the swelling medium. Swelling properties of gelatin/acrylic acid copolymer hydrogels with different AAc contents were investigated at different pH values. Swelling data showed that the prepared hydrogels possessed pronounced pH sensitivity. In vitro release studies were performed to evaluate the hydrogel potential as drug carrier using ketoprofen as a model drug. Experimental data showed that the release profile depends on both hydrogel composition and pH of the releasing medium. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and application in drug controlled delivery of pH‐sensitive P(CE‐co‐DMAEMA‐co‐MEG) hydrogel

A pH‐sensitive hydrogel [P(CE‐co‐DMAEMA‐co‐MEG)] was synthesized by the free‐radical crosslinking polymerization of N,N‐dimethylaminoethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether methacrylate(MPEG‐Mac) and methoxyl poly(ethylene glycol)‐poly(caprolactone)‐methacryloyl methchloride (PCE‐Mac). The effects of pH and monomer content on swelling property, swelling and deswelling kinetics of the hydrogels were examined and hydrogel microstructures were investigated by SEM. Sodium salicylate was chosen as a model drug and the controlled‐release properties of hydrogels were pilot studied. The results indicated that the swelling ratios of the gels in stimulated gastric fluids (SGF, pH = 1.4) were higher than those in stimulated intestinal fluids (SIF, pH = 7.4), and followed a non‐Fickian and a Fickian diffusion mechanism, respectively. In vitro release studies showed that its release rate depends on different swelling of the network as a function of the environmental pH and DMAEMA content. SEM micrographs showed homogenous pore structure of the hydrogel with open pores at pH 1.4. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40737.     

Chitosan‐based interpolymeric pH‐responsive hydrogels for in vitro drug release

Two series of pH‐responsive biodegradable interpolymeric (IPN) hydrogels based on chitosan (Ch) and poly(vinyl alcohol) (PVA) were prepared for controlled drug release investigations. The first series was chemically crosslinked with different concentrations of glutaraldehyde and the second was crosslinked upon γ‐irradiation by different doses. The equilibrium swelling characteristics were investigated for the gels at 37°C in buffer solutions of pH 2.1 and 7.4 as simulated gastric and intestinal fluids, respectively. 5‐Fluorouracil (FU) was entrapped in the hydrogels, as a model therapeutic agent, and the in vitro release profiles of the drug were established at 37°C in pH 2.1 and 7.4. FTIR, SEM, and X‐ray diffraction analyses were used to characterize and investigate the structural changes of the gels with the variation of the blend composition and crosslinker content before and after the drug loading. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2864–2874, 2007     

Swelling behavior of hydrogels for colon‐site drug delivery

Hydrogels based on n‐alkyl methacrylate esters (n‐AMA), acrylic acid, and acrylamide crosslinked with 4,4′‐di(methacryloylamino)azobenzene were prepared. Swelling behavior of the hydrogels was studied by the immersion of slabs in buffered solutions at pH 2.2–7.4. The diffusion of water into the slabs was discussed on the stress relaxation model of polymer chains. The results obtained are in good agreement with Schott's second‐order diffusion kinetics. The constants A and B of Schott's kinetics equation depend on the balance of hydrophobicity/hydrophilicity, the rigidity/flexibility, and the degree of crosslinking. The factors that exert the greatest influence on the swelling behavior of the gels include the degree of crosslinking, the lengths of the n‐AMA side chains, and pH values. By adjusting these factors, the degree of swelling of the hydrogels in the small intestine can be controlled, and consequently the drugs may avoid being released before arriving in the colon. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2835–2842, 2002; DOI 10.1002/app.10259     

Synthesis and characterization of novel pH‐responsive poly(2‐hydroxylethyl methacrylate‐co‐N‐allylsuccinamic acid) hydrogels for drug delivery

In this study, N‐allylsuccinamic acid (NASA) was synthesized in a single step with a yield of 85%. Carboxylic acid containing NASA was characterized through Fourier transform infrared (FTIR) radiation and ¹H‐NMR and ¹³C‐NMR analysis, and then it was used for synthesis of poly(2‐hydroxylethyl methacrylate‐co‐N‐allylsuccinamic acid) [p(HEMA‐co‐NASA)] hydrogels. The structure of the obtained pH‐responsive p(HEMA‐co‐NASA) hydrogels were characterized with FTIR spectroscopy and scanning electron microscopy analysis, and their swelling characterization was carried out under different drug‐release conditions. In the application step of the study, the hydrogels were used for the in vitro release of vitamin B12 and Rhodamine 6G, which were selected as model drugs. We determined that the hydrogels used as a drug‐delivery matrix could release the drug they had absorbed under different release conditions (phosphate‐buffered saline, 0.9% NaCl, and pH 1.2) at high rates for time periods of up to 24 h. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39660.     

pH‐sensitive hydroxyethyl starch–doxorubicin conjugates as antitumor prodrugs with enhanced anticancer efficacy

Doxorubicin (DOX) is a widely used chemotherapeutic drug for the treatment of several types of cancers, which has limitation in clinical applications because of severe heart toxicity. Herein, to reduce the fast clearance from the blood system and the severe systemic toxicity caused by the nonspecific protein adsorption, a pH‐sensitive drug delivery system with higher drug conjugated content was prepared by conjugating DOX onto hydroxyethyl starch (HES) with a pH‐sensitive hydrazone bond. In normal physiological environment, the release of DOX conjugated onto HES was slight which could be neglected without any side effect. However, in an acidic environment mimicking the tumor microenvironment, this pH‐sensitive hydrazone linkage provided a controlled and sustained release of DOX over a period of more than 3 days. The conjugates had good biocompatibility, long circulation, and lower cytotoxicity, which could efficiently be transferred into HeLa and HepG2 cells and release the conjugated drug. Based on these promising properties, these HES–DOX conjugates outline the significant potential for future biomedical application in the controlled release of antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42778.     

Preparation of chitosan‐based thermosensitive hydrogels for drug delivery

The thermosensitive material that could be transformed into gel at 37°C was prepared from chitosan (dissolved in acetic acid/sodium acetate buffer solution) and a mixture of α‐ and β‐glycerophosphate (αβ‐GP). The thermosensitive characteristics, appearance, and structure of the hydrogel were all affected by the pH, ionic strength, and CS/αβ‐GP ratio. The optimal conditions for the preparation of a transparent CS‐αβ‐GP thermosensitive hydrogel were pH 4.6, ionic strength 0.15 mol/L, and a CS/αβ‐GP ratio of 8.8/1.2 (v/v). The hydrogel was stable for at least 3 months at 4°C. We believe that hydrogen bonding interactions between the N? H (and C?O) groups of chitosan and the O? H groups of αβ‐GP play an important role during the process of sol‐to‐gel transition. The cumulative release of adriamycin from the CS‐αβ‐GP hydrogel, measured in PBS at pH 7.4, reached only 60 to 70% over 24 h, indicating that this material could be potentially used in a sustained drug delivery system. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A convenient scheme for synthesizing reduction‐sensitive chitosan‐based amphiphilic copolymers for drug delivery

A novel type of reduction‐sensitive graft copolymers, chitosan‐S‐S‐poly(ε‐caprolactone) (CS‐S‐S‐PCL, here ‐S‐S‐ means PCL was conjugated onto chitosan backbone through disulfide linkage), was synthesized through a convenient route using dithiodipropionic anhydride (DTDPA) as a disulfide donor. Reaction of hydroxy‐terminated poly(ε‐caprolactone) (PCL) with DTDPA quantitatively yielded DTDPA functionalized PCL (PCL‐S‐S‐COOH). The disulfide‐containing polyester was regioselectively conjugated onto the hydroxy groups of chitosan under mild and homogeneous conditions, utilizing dodecyl sulfate‐chitosan complexes (SCC) as an intermediate. The self‐assembly and Doxorubicin (Dox) release behavior of the copolymers were investigated. Spherical micelles could be formed through self‐assembly of CS‐S‐S‐PCL in aqueous media. The reduction‐sensitive behavior of CS‐S‐S‐PCL micelles was investigated by using Dithiothreitol (DTT) as a reductive reagent. In the presence of 10 mM DTT, the micelles gradually lost their aggregation stability and were precipitated out after four days. In addition, the Dox release was accelerated when the micelles were treated with DTT. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

pH‐sensitive alginate/soy protein microspheres as drug transporter

The complex microspheres based on alginate (AL) and soy protein isolate (SPI) were prepared by solution blending and then Ca²⁺ crosslinking, and their function as drug carrier was explored as well. The effects of composition on the structures of microspheres were studied, and the XRD results proved the miscibility between components. Meanwhile, FTIR results suggested that such miscibility was driven by strong hydrogen bonding. Especially, the complex microsphere with equal content of AL and SPI had the best miscibility by morphological analysis, shown as a smooth and uniform surface of SEM images. The controlled release function of the complex microspheres was verified using theophylline as a drug model, that is, the swelling and drug release were affected by pH conditions and showed obvious differences under given pH of stomach, intestine, and colon. Moreover, the intestine and colon may be optimal site for prompt release of drugs. Except for the attribution of AL component to pH sensitivity, the complex microspheres also inherited the bioactivity of SPI component, which may lower irritants of drug to the tissues in body. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

pH‐responsive hydrogels with dispersed hydrophobic nanoparticles for the delivery of hydrophobic therapeutic agents

To investigate the delivery of hydrophobic therapeutic agents, a new class of polymer carriers was synthesized. These carriers are composed of two components: (i) a pH‐responsive hydrogel composed of methacrylic acid grafted with poly(ethylene glycol) tethers, P(MAA‐g‐EG), and (ii) hydrophobic poly(methyl methacrylate) (PMMA) nanoparticles. Before the P(MAA‐g‐EG) hydrogel was crosslinked, PMMA nanoparticles were added to the solution and upon exposure to UV light they were photoencapsulated throughout the P(MAA‐g‐EG) hydrogel structure. The pH‐responsive behavior of P(MAA‐g‐EG) is capable of triggered release of a loaded therapeutic agent, such as a low molecular weight drug or protein, when it passes from the stomach (low pH) to upper small intestine (neutral pH). The introduction of PMMA nanoparticles into the hydrogel structure affected the swelling behavior, therapeutic agent loading efficiency, and solute release profiles. In equilibrium swelling conditions the swelling ratio of nanoparticle‐containing hydrogels decreased with increasing nanoparticle content. Loading efficiencies of the model therapeutic agent fluorescein ranged from 38% to 51% and increased with increasing hydrophobic content. Release studies from neat P(MAA‐g‐EG) and the ensuing P(MAA‐g‐EG) hydrogels containing nanoparticles indicated that the transition from low pH (2.0) to neutral pH (7.0) triggered fluorescein release. Maximum fluorescein release depended on the structure and hydrophobicity of the carriers used in these studies. Copyright © 2012 Society of Chemical Industry     

Dual pH‐ and thermal‐responsive nanocomposite hydrogels for controllable delivery of hydrophobic drug baicalein

Hydrogels have been widely used as mild biomaterials due to their bio‐affinity, high drug loading capability and controllable release profiles. However, hydrogel‐based carriers are greatly limited for the delivery of hydrophobic payloads due to the lack of hydrophobic binding sites. Herein, nano‐liposome micelles were embedded in semi‐interpenetrating poly[(N‐isopropylacrylamide)‐co‐chitosan] (PNIPAAm‐co‐CS) and poly[(N‐isopropylacrylamide)‐co‐(sodium alginate)] (PNIPAAm‐co‐SA) hydrogels which were responsive to both temperature and pH, thereby establishing tunable nanocomposite hydrogel delivery systems. Nano‐micelles formed via the self‐assembly of phospholipid could serve as the link between hydrophobic drug and hydrophilic hydrogel due to their special amphiphilic structure. The results of transmission and scanning electron microscopies and infrared spectroscopy showed that the porous hydrogels were successfully fabricated and the liposomes encapsulated with baicalein could be well contained in the network. In addition, the experimental results of response release in vitro revealed that the smart hydrogels showed different degree of sensitiveness under different pH and temperature stimuli. The results of the study demonstrate that combining PNIPAAm‐co‐SA and PNIPAAm‐co‐CS hydrogels with liposomes encapsulated with hydrophobic drugs is a feasible method for hydrophobic drug delivery and have potential application prospects in the medical field. © 2018 Society of Chemical Industry     

Rheological properties and drug release characteristics of pH‐responsive hydrogels

Rheological properties, blend compatibility, and gel‐forming capacity of carbopol 940 (CP‐940), sodium alginate (NaAlg), and guar gum (GG) have been studied. These matrices have been used in delivery of timolol maleate for ophthalmic applications. Aqueous solutions of CP‐940, NaAlg, and GG in concentrations between 0.1 and 1% (wt/vol) and their blends have been prepared. In situ gel forming polymeric solutions have shown an increase in viscosity upon exposure to specific pH, ions, and temperature of the eyeball. Blend miscibility was studied by calculating polymer–polymer interaction parameters using viscosity data. Rheological properties viz., torque, viscosity, shear stress, and shear rate were obtained using a Brookfield rheometer. Viscosities of polymer solutions were obtained by a Schott Gerate viscometer. Rheological data were analyzed using Bingham, Casson Standard, and Casson Chocolate equations. The hydrogels were subjected to ex vivo release studies on timolol maleate through the excised bovine cornea using a modified Franz diffusion cell. Results were compared with the conventional drug solution. The release could be extended when the drug is incorporated into hydrogel‐forming solution. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2057–2064, 2004     

Development of pH‐sensitive nanogels for cancer treatment using crosslinked poly(aspartic acid‐graft‐imidazole)‐block‐poly(ethylene glycol)

pH‐sensitive nanogels (NGs) based on poly(aspartic acid‐graft‐imidazole)‐poly(ethylene glycol) were developed using linear PEG with different molecular weights (2000 and 4000 Da) as crosslinkers. The pH‐sensitive NGs showed reversible size changes during continuously alternating pH changes. The anticancer treatment potential of pH‐sensitive NGs was studied using a model drug, irinotecan (IRI). IRI‐loaded NGs (ILNs) showed different drug release kinetics in acidic versus neutral pH, in addition to pH‐dependent cytotoxicity. Due to its longer crosslinker, ILN 4 (crosslinked with PEG 4000) showed faster IRI release and a greater magnitude of IRI release than ILN 2 (crosslinked with PEG 2000), resulting in greater cytotoxicity against HCT 116 colorectal cancer cells. These pH‐sensitive NGs could potentially be used in cancer treatment by mediating the accumulation and release of IRI from ILNs in the acidic tumor environment and by reducing systemic toxicity due to reversible swelling–shrinkage. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46268.     

Synthesis and evaluation of sucrose‐containing polymeric hydrogels for oral drug delivery

Biodegradable and biocompatible copolymeric hydrogels based on sucrose acrylate, N‐vinyl‐2‐pyrrolidinone, and acrylic acid were designed and synthesized. Because of the growing importance of sugar‐based hydrogels as drug delivery systems, these new pH‐responsive sucrose‐containing copolymeric hydrogels were investigated for oral drug delivery. The sucrose acrylate monomer was synthesized and characterized. The copolymeric hydrogel was synthesized by free‐radical polymerization. Azobisisobutyronitrile (AIBN) was the free‐radical initiator employed and bismethyleneacrylamide (BIS) was the crosslinking agent used for hydrogel preparations. Homopolymeric vinyl pyrrolidone hydrogels were also prepared by the same technique. The hydrogels were characterized by differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). These results indicate the pH‐responsive nature of the hydrogels. The gels swelled more in SIF than in SGF. A model drug, propranolol hydrochloride (PPH), was entrapped in these gels and the in vitro release profiles were established separately in both enzyme‐free SGF and enzyme‐free SIF. The drug release was found to be faster in SIF. About 93 and 99% of the entrapped drug was released over a period of 24 h in SGF and SIF, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2597–2604, 2002