1‐Amino‐1‐hydrazo‐2,2‐dinitroethene – a Hazard Warning

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene ( 2 ) has been observed to spontaneously decompose with considerable violence during storage. Its preparation and handling should be regarded as potentially hazardous.     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

Continuous‐Flow Di‐N‐Alkylation of 1H‐Benzimidazole in a Fixed‐Bed Reactor

A new process for a continuous‐flow di‐N‐alkylation of 1H‐benzimidazole to 1H‐benzimidazole‐3‐ium iodide by methylene iodide in the presence of potassium carbonate in a fixed‐bed reactor is presented. The synthesis was transferred from batch to continuous operation with similar yields and conversion rates. Moreover, the influence of temperature and residence time in the continuous flow setup was characterized; optimized conditions led to a doubling of yield. In addition, the continuous flow allowed for a better control of the two‐step reaction by adding an additional tube reactor after the fixed bed that further enhanced the overall performance. With this, the continuous‐flow system presented itself as superior due to higher available temperatures and a better controllability.     

Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

Gas‐sensor fabrication by a layer‐by‐layer technique using polydiacetylene

In order to increase the sensitivity of a polydiacetylene (PDA) sensor, PDA, and poly(sodium 4‐styrene‐sulfonate) (PSS) were alternately stacked to form a layer‐by‐layer (LBL) film on the quartz. In this study, N‐(2‐aminoethyl)pentacosa‐10,12‐diynamide (AEPCDA) was used as a constituent of the PDA and n‐butylamine was used as a target compound. The formed‐film sensor showed higher sensitivity than the vesicle solution. There was a large difference in sensitivity depending on the method used to form the LBL film. Unlike the vesicle solution state, the formed‐film sensor exhibited excellent reversibility in the color change caused by heat. The LBL film formed worked very well as a sensor that detects the actual gas, n‐butyl amine, showing its potential for practical applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44997.     

Synthesis,characterization and fluorescence performance of a waterborne polyurethane‐based fluorescent dye 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide,WPU‐ACN

A waterborne‐polyurethane‐based fluorescent dye 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide (WPU‐ACN) was synthesized by attaching 4‐amino‐N‐cyclohexyl‐1,8‐naphthalimide (ACN) into polyurethane chains according to a prepolymer?ionomer process. The structure of WPU‐ACN was confirmed by means of Fourier transform infrared spectroscopy and UV?visible absorption. The number‐average molecular weight, glass transition temperature and average emulsion particle size for WPU‐ACN were determined as 7.8 × 10⁵ g mol^?1, 60 °C and 60 nm, respectively. The improved thermal stability of WPU‐ACN could be attributed to the incorporation of naphthalimide units in the preformed urethane groups. The fluorescence intensity of WPU‐ACN was dramatically enhanced compared with that of ACN. It was found that the fluorescence intensity of WPU‐ACN increased with increasing temperature, and the fluorescence spectra of WPU‐ACN showed a positive solvatochromic effect. In addition, the fluorescence of WPU‐ACN emulsion was very stable not only for long‐term storage but also for fluorescence quenching. © 2013 Society of Chemical Industry     

Lecithin‐enhanced biotransformation of cholesterol to androsta‐1,4‐diene‐3,17‐dione and androsta‐4‐ene‐3,17‐dione

A biotransformation process using Mycobacterium sp was studied for androsta‐1, 4‐diene‐3,17‐dione (ADD) and androsta‐4‐ene‐3,17‐dione (AD) production from cholesterol. Cholesterol has a poor solubility in water (～1.8 mg dm^?3 at 25 °C), which makes it difficult to use as the substrate for biotransformation. Lecithin is a mixture of phospholipids of phosphatidylcholine (PC) and phosphatidylethanolamine (PE), which behave like surfactants and can form planar bi‐layer structures in an aqueous medium. Therefore, a small amount of lecithin (<1 g dm^?3) can be used to form stable colloids with cholesterol at a relatively high concentration (20 g dm^?3) in water. In this work, an energy density of 1000 J cm^?3 from sonication was provided to overcome the self‐association of cholesterol and to generate a stable lecithin–cholesterol suspension that could be used for enhanced biotransformation. The lecithin–cholesterol suspension was stable and could withstand typical autoclaving conditions (121 °C, 15 psig, 20 min). In contrast to conventional surfactants, such as Tween 80, that are commonly used to help solubilize cholesterol, lecithin did not change the surface tension of the aqueous solution nor cause any significant foaming problem. Lecithin was also biocompatible and showed no adverse effect on cell growth. Compared with the medium with Tween 80 as the cholesterol‐solubilizing agent, lecithin greatly improved the biotransformation process in regard to its final product yield (～59% w/w), productivity (0.127–0.346 g dm^?3 day^?1), ADD/AD ratio (6.7–8), as well as the long‐term process stability. Cells can be reused in repeated batch fermentations for up to seven consecutive batches, but then lose their bioactivity due to aging problems, possibly caused by product inhibition and nutrient depletion. © 2002 Society of Chemical Industry     

An Ab Initio Theoretical Study of 2,4,6‐Trinitro‐1,3,5‐Triazine, 3,6‐Dinitro‐1,2,4,5‐Tetrazine,and 2,5,8‐Trinitro‐Tri‐s‐Triazine

In order to evaluate 2,4,6‐trinitro‐1,3,5‐triazine (TNTAz), 3,6‐dinitro‐1,2,4,5‐tetrazine (DNTAz), and 2,5,8‐trinitro‐tri‐s‐triazine (TNTsTAz), the geometries of these compounds have been fully optimized employing the B3LYP density functional method and the AUG‐cc‐pVDZ basis set. The accurate gas phase enthalpies of formation have been obtained by using the atomization procedure and designing isodesmic reactions in which the parent rings are not destroyed. Based on B3LYP/AUG‐cc‐pVDZ calculated geometries and natural charges, the crystal structures have been predicted using the Karfunkel–Gdanitz method. Computed results show that there exists extended conjugation over the parent rings of these compounds. More energy content is reserved in DNTAz than in both TNTAz and TNTsTAz. The title compounds are much more sensitive than 1,3,5‐trinitrobenzene. The calculated detonation velocity of DNTAz reaches 9.73–9.88 km s⁻¹, being larger than those of CL‐20 and TNTAz. TNTsTAz has no advantage over the widely used energetic compounds such as RDX and HMX.     

Optimal Design of a Gas‐to‐Liquids Process with a Staged Fischer‐Tropsch Reactor

The optimal design of a natural gas‐to‐liquid hydrocarbons (GTL) process with a multistage cobalt‐based Fischer‐Tropsch reactor and interstage product separation is considered. The objective function is to maximize the wax (C₂₁₊) production rate at the end of the reactor path. Sectioning of the Fischer‐Tropsch reactor increases the chain growth probability inside the reactor which results in a higher production of wax. The carbon efficiency of the two‐stage reactor is distinctly higher than that of the single‐stage reactor.     

Generation of 11‐Fluoro‐11H‐indeno[1,2‐c]quinolines via a Palladium‐Catalyzed Three‐Component Reaction of 2‐Alkynylbromobenzenes, 2‐Alkynylanilines,and N‐Fluorobenzenesulfonimide

A novel and efficient synthesis of 11‐fluoro‐11H‐indeno[1,2‐c]quinolines has been developed via a palladium‐catalyzed three‐component reaction of 2‐alkynylbromobenzenes, 2‐alkynylanilines, and N‐fluorobenzenesulfonimide. The reaction works well with high selectivity. Additionally, the diversity and complexity could be easily introduced via a simple operation from readily available starting materials. In the meantime, a fluorine atom could be incorporated into the scaffold during the reaction process.     

Synthesis of the Ammonium Salt of 6‐Amino‐2‐hydroxy‐ 3,5‐dinitropyrazine and a Comparison of its Properties with those of Ammonium 3,5‐Diaminopicrate (ADAP)

The ammonium salt of 6‐amino‐2‐hydroxy‐3,5‐dinitropyrazine has been synthesised from 2,6‐dimethoxy‐3,5‐dinitropyrazine and its properties (DSC, crystal structure, impact sensitiveness and thermochemical properties) are compared with the analogous benzene derivative, ammonium 3,5‐diaminopicrate.     

Synthesis and reactive features of a terpolymer: Poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate)

A polyvinyl pyrrolidone terpolymer system is described that can be chemically cross‐linked at moderate, 70–100°C, temperatures. The system has significant potential for development of durable long‐lasting pyrrolidone coatings in a wide range of applications, particularly in water filtration membrane construction where leaching is an unresolved, serious problem. The synthesis of the terpolymer, poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate), by free radical polymerization is described. The reactive features of this terpolymer are presented in the context of acidic anhydride curing. In a polar aprotic solvent, the terpolymer is reacted with poly(methyl vinyl ether‐co‐maleic acid) and cured thermally. Key aspects of the terpolymer synthesis and the acid anhydride cross‐linking reaction using DSC, rheology, FTIR, and a small molecule model system to study the cross‐linking chemistry are presented. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Microcapsules prepared from a polycondensate‐based cement dispersant via layer‐by‐layer self‐assembly on melamine‐formaldehyde core templates

Novel microcapsules were prepared from colloidal core–shell particles by acid dissolution of the organic core. Weakly crosslinked, monodisperse and spherical melamine‐formaldehyde polycondensate particles (diameter ～ 1 μm) were synthesized as core template and coated with multilayers of an anionic polyelectrolyte via layer‐by‐layer deposition technique. As polyelectrolytes, an anionic naphthalenesulfonate formaldehyde polycondensate that is a common concrete superplasticizer and thus industrially available, and cationic poly(allylamine hydrochloride) were used. Core removal was achieved by soaking the core–shell particles in aqueous hydrochloric acid at pH 1.6, resulting in hollow microcapsules consisting of the polyelectrolytes. Characterization of the template, the core–shell particles, and the microcapsules plus tracking of the layer‐by‐layer polyelectrolyte deposition was performed by means of zeta potential measurement and scanning electron microscopy. The microcapsules might be useful as microcontainers for cement additives. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Silver Salt of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine – Characterization of this Primary Explosive

A new primary explosive, the silver salt of 4,6‐diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (AgDANT), was synthesized and characterized. AgDANT was prepared with a 97 % yield and characterized by IR spectroscopy, single‐crystal X‐ray diffraction, and DTA. The crystal density of AgDANT is 2.530 g cm⁻³ and the molecule consists of a centro‐symmetric dimer with a high degree of planarity. The intramolecular Ag Ag distance is relatively low (331 pm) and can be considered as a strong argentophilic interaction. AgDANT is non‐hygroscopic and its solubility in water (1.27 mg in 100 mL at 23 °C) is on a similar level of solubility to that of silver azide. The sensitivity of AgDANT to impact is slightly higher than that for MF, sensitivity to friction is the same as for LA, and sensitivity to electric discharge is between that for LS and MF. Initiation efficiency of AgDANT was tested in electric detonators and compared to dextrinated lead azide (initiation efficiency of AgDANT is 40 mg for PETN secondary charge). The thermal resistance of detonators with AgDANT is satisfactory; all detonators were fully functional after exposure at 65 °C (30 d) and 85 °C (2 d).     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane‐poly(dimethylsiloxane) block copolymers

The heterofunctional condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane with dihydroxydiphenylsilane at various ratios of initial compounds in the presence of amines was carried out, and α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with various degrees of condensation were obtained. Corresponding block copolymers were obtained by heterofunctional polycondensation of synthesized α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with α,ω‐dichlorodimethylsiloxanes in the presence of amines. Thermogravimetry, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray analysis were carried out on the synthesized block coplymers. Differential scanning calorimetry and wide‐angle X‐ray studies of these copolymers showed that their properties were determined by the ratio of the lengths of the flexible linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane fragments in the main macromolecular chain. Two‐phase systems were obtained with specific flexible and rigid fragment length values in synthesized block copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3462–3467, 2006     

Synthesis and light‐emitting properties of a novel π‐conjugated poly[di(p‐phenyleneethynylene)‐alt‐ (p‐phenylenecyanovinylene)] containing n‐octyloxy side branches

A novel π‐conjugated poly[di(p‐phenyleneethynylene)‐alt‐(p‐phenylenecyanovinylene)] having n‐octyloxy side chains (PPE‐C₈PPE‐PPV) was prepared by polymerization of the monomer DEDB with BCN. Chemical structure of the polymer obtained was confirmed by ¹H NMR, FTIR, and EA. PPE‐C₈PPE‐PPV had a molecular weight enough to fabricate the electroluminescent (EL) device, and showed a good organosolubility, excellent thermal stability, and film‐forming property. In UV absorption and PL spectra in film it showed a maximum at 430 and 543 nm, respectively, which appeared 5 and 41 nm longer wavelengths than that of the solution, respectively. HOMO, LUMO energy levels and band gap were determined to be ?5.70, ?3.29, and 2.41 eV, respectively. Two EL devices with low‐work function cathodes were fabricated with the structures of ITO/PEDOT/PPE‐C₈PPE‐PPV/cathodes (LiF/Al and Mg:Ag/Ag). The both devices exhibited a bright green light emission at 545 nm and the maximum luminescence of 197 cd/cm² (LiF/Al) and 158 cd/cm² (Mg:Ag/Ag). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of novel phosphorous‐containing biphenol, 2‐(5, 5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐1,4‐benzenediol and its application as flame‐retardant in epoxy resin

A novel phosphorous‐containing biphenol, 2‐(5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐ 1,4‐benzenediol (DPODB), was prepared by the addition reaction between 5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorinane phosphonate (DPODP) and p‐benzoquinone (BQ). The compound (DPODB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) for electronic application. The structure of DPODB was confirmed by FTIR and NMR spectra. Thermal properties of cured epoxy resin were studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was tested by UL‐94 vertical test and achieved UL‐94 vertical tests of V‐0 grade (nonflammable). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3842–3847, 2006     

(R)‐α‐Lipoyl‐Glycyl‐L‐Prolyl‐L‐Glutamyl Dimethyl Ester Codrug as a Multifunctional Agent with Potential Neuroprotective Activities

The (R)‐α‐lipoyl‐glycyl‐L ‐prolyl‐L ‐glutamyl dimethyl ester codrug (LA‐GPE, 1 ) was synthesized as a new multifunctional drug candidate with antioxidant and neuroprotective properties for the treatment of neurodegenerative diseases. Physicochemical properties, chemical and enzymatic stabilities were evaluated, along with the capacity of LA‐GPE to penetrate the blood–brain barrier (BBB) according to an in vitro parallel artificial membrane permeability assay for the BBB. We also investigated the potential effectiveness of LA‐GPE against the cytotoxicity induced by 6‐hydroxydopamine (6‐OHDA) and H₂O₂ on the human neuroblastoma cell line SH‐SY5Y by using the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) reduction assay. Our results show that codrug 1 is stable at both pH 1.3 and 7.4, exhibits good lipophilicity (log P=1.51) and a pH‐dependent permeability profile. Furthermore, LA‐GPE was demonstrated to be significantly neuroprotective and to act as an antioxidant against H₂O₂‐ and 6‐OHDA‐induced neurotoxicity in SH‐SY5Y cells.     

Crystallization behavior of 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol and 1‐palmitoyl‐2,3‐dioleoyl‐glycerol

A model margarine was stored under a temperature fluctuation cycle of 5—20 °C until granular crystals were observed. Using information obtained from the granular crystals, the crystallization behaviors of major triacylglycerols of palm oil, 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol (POP), 1‐palmitoyl‐2,3‐dioleoyl‐glycerol (POO), and their mixtures were then investigated. It was shown that in the model margarine, the POP content in the granular crystals was higher than in their surrounding materials, and the X‐ray diffraction pattern of the granular crystals revealed that they were the most stable polymorph, β. 99% pure POP, POO, and their mixtures were then stored under the above‐mentioned temperature cycle. POP was found to form the unstable polymorph, α, when cooled rapidly from the melt. Within 24 hours transformation into the γ polymorph and then into the β polymorph was observed. POO was shown to transform into the β' polymorph from α. When POP and POO were mixed, the β polymorph did not emerge, instead it was shown that POP and POO were both agglomerated in the mixtures, giving rise to the formation of granular crystals.