基于扰动观测器的机械臂自适应反演滑模控制

机械臂的动力学模型通常包含一定的结构不确定性,并受到外界未知干扰的影响。针对现有模型的不确定性特点,提出了一种基于非线性扰动观测器的自适应反演滑模控制方法,解决机械臂的轨迹跟踪控制问题。对于外界干扰,利用非线性扰动观测器进行观测补偿,无需上界先验知识;对于结构不确定性,引入反演滑模控制,同时设计自适应律,保证闭环系统的稳定性并增强系统的动态适应性。仿真结果证明,所提出的方法可以有效克服系统不确定性,降低控制输入信号的抖振,最终实现期望轨迹的快速精确跟踪。     

基于干扰观测器的机械臂改进趋近律的滑模控制

针对机械臂滑模控制中存在抖振的问题以及对外界干扰较为敏感的特性,设计了一种基于干扰观测器的机械臂改进趋近律的滑模控制策略。该策略在指数趋近律中引入饱和函数,提出了一种改进趋近律;根据系统动力学模型,对系统的不确定性和外部干扰采用干扰观测器进行观测;在此基础上设计系统滑模控制律,控制律对未观测的干扰进行补偿。仿真结果表明,控制策略能有效地抑制轨迹跟踪中的抖振问题,较好地克服外界干扰,保证系统的控制性能。     

基于非线性干扰观测器的减摇鳍滑模反演控制

利用一种非线性干扰观测器观测减摇鳍系统的不确定性和随机海浪干扰,通过选择设计参数使观测误差指数收敛.针对引入非线性干扰观测器后的系统采用滑模反演法设计控制器,控制律的设计保证了闭环系统的稳定性.仿真结果表明,在不同浪向角和航速的各种海况下采用该控制策略,系统均能取得较好的减摇效果,同时能很好地克服对象的不确定性和随机海浪干扰,鲁棒性较强.     

基于非线性干扰观测器的高超声速飞行器滑模反演控制

针对高超声速飞行器非线性、强耦合和参数不确定弹性体模型,提出了一种基于非线性干扰观测器的滑模反演控制方法.将飞行器曲线拟合模型分解为速度子系统和高度相关子系统并表示为严格反馈形式,分别采用滑模和反演方法设计实际控制量与虚拟控制量.采用1阶低通滤波器获取虚拟控制量的导数,解决了传统反演控制方法"微分项膨胀"问题.基于改进滑模微分器设计了一种新型非线性干扰观测器,以此对模型不确定项进行估计和补偿.仿真结果表明,该控制器对模型不确定性和气动弹性影响具有鲁棒性,且实现了对速度和高度参考输入的稳定跟踪.     

基于干扰观测器的非线性不确定系统自适应滑模控制

本文研究了一类基于非线性干扰观测器的多输入多输出非线性不确定系统的边界层自适应滑模控制方法并应用于近空间飞行器高精度姿态控制.考虑系统存在不确定性和外部干扰上界未知的情况,设计了基于干扰观测器的边界层自适应滑模控制器,以消除传统滑模控制中的"抖振"现象,使跟踪误差趋近于零.同时,利用李雅普洛夫方法严格证明了闭环系统的稳定性.最后将所研究的自适应滑模控制方法,应用于某近空间飞行器的姿态控制中,仿真结果表明在不确定性和外部干扰作用下能保证姿态控制的稳定性,对参数不确定具有较好的鲁棒性.     

空间柔性机械臂高阶滑模干扰观测器轨迹跟踪

在空间漂浮状态时机械臂载体姿态均不受控的条件下,针对机械臂在关节空间内轨迹跟踪及振动抑制等问题,提出了一种基于空间机械臂改进高阶滑模干扰观测器控制策略。利用拉格朗日方程及动量守恒定律建立机械臂运动学数学模型,对误差估计值进行修正,设计干扰观测器,根据机械臂末端轨迹设计合理的高阶滑模面及滑模函数。针对设计的观测器进行模拟仿真实验,并改变理想轨迹,使其在复杂曲线中运行。仿真结果表明:高阶滑模干扰观测器可应用于更为复杂的工作空间中,并更有效、精确地实现了轨迹跟踪任务。     

基于滑模控制的机械臂轨迹跟踪控制

针对多自由度机械臂轨迹跟踪存在的外部干扰和系统抖振问题,设计了一种干扰观测器结合滑模控制的轨迹跟踪方法.针对干扰问题,采用干扰观测器对系统的外部干扰进行观测;针对控制系统存在的抖振问题,设计滑模控制器进行补偿.采用二自由度机械臂为控制对象进行仿真实验,结果表明,该方法能有效克服外部扰动的同时,有效地削弱了系统抖振,提高...     

基于反演设计的机器人自适应动态滑模控制

针对机器人跟踪控制问题,设计了一种新型的动态滑模控制器,采用反演（backstepping）方法设计一种新的切换函数,将不连续项转移到了控制的一阶导数中,得到了输入的平滑性的动态滑模控制律。该控制律能保证轨迹跟踪误差的快速收敛性和参数不确定的鲁棒性,仿真实例验证了该控制算法的有效性。     

A novel fixed-time sliding mode control for nonlinear manipulator systems based on adaptive disturbance observer

Considering that in the trajectory tracking control of a nonlinear robotic manipulator system, the control effect is easily limited by the initial state of the system, and the system has modeling error, unknown disturbance, and friction in the actual control, to overcome the above problems, a fixed-time sliding mode control (SMC) strategy based on adaptive disturbance observer (ADO) is developed in this paper. Firstly, feedforward compensation of the system is achieved by developing an ADO to accurately estimate the compound disturbances in the system. Second, a new fixed-time sliding mode (SM) surface is presented to overcome the singularity issue and accelerate the error convergence. In addition, to enhance the performance of the reaching phase, a variable exponential power reaching law (VEPRL) is developed, which can effectively adjust the convergence rate. Through rigorous theoretical analysis, it is shown that the system state can be stabilized at a fixed time, and an upper bound on the convergence time is also given. Finally, the effectiveness of the control method is verified by comparing it with different control schemes in simulation.     

Adaptive backstepping sliding mode control with tuning functions for nonlinear uncertain systems

An adaptive backstepping tuning functions sliding mode controller is proposed for a class of strict-feedback nonlinear uncertain systems. In this control design, adaptive backstepping is used to deal with unknown or uncertain parameters and the matching condition restricting the Lyapunov based design. The main drawback of the Lyapunov based adaptive backstepping which is the overparametrisation is eliminated by the tuning functions. The adaptive backstepping tuning functions design is combined with the sliding mode control in order to overcome quickly varying parametric and unstructured uncertainties, and to obtain chattering free control. The proposed controller not only provides robustness property against uncertainty but also copes with the overparametrisation problem. Experimental results of the proposed controller are compared with those of the standard sliding mode controller. The proposed controller exhibits satisfactory transient performance, good estimates of the uncertain parameters, and less chattering.     

基于扰动观测器的不确定非线性系统非奇异终端滑模控制

针对一类SISO 非线性不确定系统, 提出一种基于扰动观测器的非奇异终端滑模(NTSM) 控制策略. 在保证控制器非奇异性的情况下, 设计了一种改进的NTSM函数, 理论分析证明了到达滑模面的时间小于传统NTSM控制算法的到达时间. 同时为了消除系统扰动量对控制器抖振的影响, 设计了一种线性扰动观测器以降低滑模切换项的增益, 并采用Sigmoid 函数来替代传统的符号函数. 仿真结果表明了所得结论的正确性和有效性.     

Adaptive backstepping sliding mode control for feedforward uncertain systems

Output tracking backstepping sliding mode control for feedforward uncertain systems is considered in this article. Feedforward systems are not usually transformable to the parametric semi-strict feedback form, and they may include unmatched uncertainties consisting of disturbances and unmodelled dynamics terms. The backstepping method presented in this article, even without uncertainties differs from that of Ríos-Bolívar and Zinober [Ríos-Bolívar, M. and Zinober, A.S.I. (1999), ‘Dynamical Adaptive Sliding Mode Control of Observable Minimum Phase Uncertain Nonlinear Systems’, in Variable Structure Systems: Variable Structure Systems, Sliding Mode and Nonlinear Control, eds., K.D. Young and Ü. Özgüner. Ozguner, London, Springer-Verlag, pp. 211–236; Ríos-Bolívar, M., and Zinober, A.S.I. (1997a), ‘Dynamical Adaptive Backstepping Control Design via Symbolic Computation’, in Proceedings of the 3rd European Control Conference, Brussels]. In this article, the backstepping is not a dynamical method as in Ríos-Bolívar and Zinober (1997a Ríos-Bolívar, M and Zinober, ASI. 1997a. Dynamical Adaptive Sliding Mode Output Tracking Control of a Class of Nonlinear Systems. International Journal of Robust and Nonlinear Control, 7: 387–405.  [Google Scholar], 1999), since at each step, the control and map input remain intact, and the differentiations of the control are not used. Therefore, the method can be introduced as static backstepping. Two different controllers are designed based upon the backstepping approach with and without sliding mode. The dynamic and static backstepping methods are applied to a gravity-flow/pipeline system to compare two methods.     

基于非线性干扰观测器的下肢外骨骼上楼梯滑模控制

针对下肢外骨骼在轨迹跟踪时对内部参数扰动和外界干扰较为敏感的特性,设计一种基于非线性干扰观测器的下肢外骨骼机器人滑模控制策略。首先建立下肢外骨骼上楼梯的动力学模型,分析其动力学特性;其次设计非线性干扰观测器,对下肢系统的不确定性和外部干扰进行观测;在此基础上,为保证系统轨迹跟踪误差的收敛性和减弱抖振,设计了低通滤波的滑模控制器,根据李雅普诺夫稳定性理论证明了下肢系统的稳定性;最后通过仿真与实验验证,该控制策略能够有效克服多种因素引起的干扰,改善系统的控制性能,提高系统的稳定性。     

Second-order terminal sliding mode control for hypersonic vehicle in cruising flight with sliding mode disturbance observer

This paper focuses on the design of nonlinear robust controller and disturbance observer for the longitudinal dynamics of a hypersonic vehicle (HSV) in the presence of parameter uncertainties and external disturbances. First, by combining terminal sliding mode control (TSMC) and second-order sliding mode control (SOSMC) approach, the secondorder terminal sliding control (2TSMC) is proposed for the velocity and altitude tracking control of the HSV. The 2TSMC possesses the merits of both TSMC and SOSMC, which can provide fast convergence, continuous control law and hightracking precision. Then, in order to increase the robustness of the control system and improve the control performance, the sliding mode disturbance observer (SMDO) is presented. The closed-loop stability is analyzed using the Lyapunov technique. Finally, simulation results illustrate the effectiveness of the proposed method, as well as the improved overall performance over the conventional sliding mode control (SMC).