利用GPS拖体在万山区域测量平均海面技术研究

Wanshan area has been chosen to be the specified field to calibrate and validate(Cal/Val) the HY-2 altimeter and its follow-on satellites. In March 2018, an experiment has been conducted to determine the sea surface height(SSH) under the HY-2 A ground track(Pass No. 203). A GPS towing-body(GPS-TB) was designed to measure the SSH covering an area of about 6 km×28 km wide centered on the HY-2 A altimeter satellite ground track. Three GPS reference stations, one tide gauge and a GPS buoy were placed in the research area, in order to process and resolve the kinematic solution and check the precision of the GPS-TB respectively. All the GPS data were calculated by the GAMIT/GLOBK software and TRACK module. The sea surface was determined by the GPS-TB solution and the tide gauge placed on Zhiwan Island. Then the sea surface of this area was interpolated by Arc GIS10.2 with ordinary Kriging method. The results showed that the precision of the GPS-TB is about 1.10 cm compared with the tide gauge placed nearby, which has an equivalent precision with the GPS buoy. The interpolated sea surface has a bias of –1.5–4.0 cm with standard deviation of 0.2–2.4 cm compared with the checking line. The gradient of the measured sea surface is about 1.62 cm/km along the HY-2 orbit which shows a good agreement compared with the CLS11 mean sea surface(MSS). In the Cal/Val of satellites, the sea surface between the tide gauge/GPS buoy and the footprint of altimeter can be improved by this work.     

Absolute calibration of HY-2A and Jason-2 altimeters for sea surface height using GPS buoy in Qinglan,China

GPS buoy methodology is one of the main calibration methodologies for altimeter sea surface height calibration. This study introduces the results of the Qinglan calibration campaign for the HY-2A and Jason-2 altimeters. It took place in two time slices;one was from August to September 2014, and the other was in July 2015. One GPS buoy and two GPS reference stations were used in this campaign. The GPS data were processed using the real-time kinematic (RTK) technique. The fi nal error budget estimate when measuring the sea surface height (SSH) with a GPS buoy was better than 3.5 cm. Using the GPS buoy, the altimeter bias estimate was about -2.3 cm for the Jason-2 Geophysical Data Record (GDR) Version ‘D' and from -53.5 cm to -75.6 cm for the HY-2A Interim Geophysical Data Record (IGDR). The bias estimates for Jason-2 GDR-D are similar to the estimates from dedicated calibration sites such as the Harvest Platform, the Crete Site and the Bass Strait site. The bias estimates for HY-2A IGDR agree well with the results from the Crete calibration site. The results for the HY-2A altimeter bias estimated by the GPS buoy were verifi ed by cross-calibration, and they agreed well with the results from the global analysis method.     

Comparison of Kuroshio surface velocities derived from satellite altimeter and drifting buoy data

Sea-surface geostrophic velocities for the Kuroshio region calculated from TOPEX/POSEIDON altimetry data together within situ oceanographic data are compared with surface velocities derived from drifting buoy trajectories. The geostrophic velocities agree well with the observed velocities, suggesting that the Kuroshio surface layer is essentially in geostrophic balance, within measurement error. The comparison is improved a little when the centrifugal acceleration is taken into account. The observed velocities are divided into the temporal mean and fluctuation components, and the partitioning of velocities between these two components is examined. For the Kuroshio region, most of the fluctuation components of the velocities derived from drifting buoys are found to be positive. This result suggests that Eulerian mean velocities for the Kuroshio region estimated from drifting buoy data tend to be larger than actual means, due to the buoy’s tendency to sample preferentially in the high-velocity Kuroshio.     

The Harvest Experiment: Monitoring Jason-1 and TOPEX/POSEIDON from a California Offshore Platform

We present calibration results from Jason-1 (2001-) and TOPEX/POSEIDON (1992-) overflights of a California offshore oil platform (Harvest). Data from Harvest indicate that current Jason-1 sea-surface height (SSH) measurements are high by 138 ± 18 mm. Excepting the bias, the high accuracy of the Jason-1 measurements is in evidence from the overflights. In orbit for over 10 years, the T/P measurement system is well calibrated, and the SSH bias is statistically indistinguishable from zero. Also reviewed are over 10 years of geodetic results from the Harvest experiment.     

The Harvest Experiment: Monitoring Jason-1 and TOPEX/POSEIDON from a California Offshore Platform Special Issue: Jason-1 Calibration/Validation

We present calibration results from Jason-1 (2001–) and TOPEX/POSEIDON (1992–) overflights of a California offshore oil platform (Harvest). Data from Harvest indicate that current Jason-1 sea-surface height (SSH) measurements are high by 138 ± 18 mm. Excepting the bias, the high accuracy of the Jason-1 measurements is in evidence from the overflights. In orbit for over 10 years, the T/P measurement system is well calibrated, and the SSH bias is statistically indistinguishable from zero. Also reviewed are over 10 years of geodetic results from the Harvest experiment.     

Absolute Calibration of TOPEX/Poseidon and Jason-1 Using GPS Buoys in Bass Strait, Australia

An absolute calibration of the TOPEX/Poseidon (T/P) and Jason-1 altimeters has been undertaken during the dedicated calibration phase of the Jason-1 mission, in Bass Strait, Australia. The present study incorporates several improvements to the earlier calibration methodology used for Bass Strait, namely the use of GPS buoys and the determination of absolute bias in a purely geometrical sense, without the necessity of estimating a marine geoid. This article focuses on technical issues surrounding the GPS buoy methodology for use in altimeter calibration studies. We present absolute bias estimates computed solely from the GPS buoy deployments and derive formal uncertainty estimates for bias calculation from a single overflight at the 40-45 mm level. Estimates of the absolute bias derived from the GPS buoys is -10 ± 19 mm for T/P and +147 ± 21 mm for Jason-1 (MOE orbit) and +131 ± 21 mm for Jason-1 (GPS orbit). Considering the estimated error budget, our bias values are equivalent to other determinations from the dedicated NASA and CNES calibration sites.     

GPS buoy and pressure transducer results from the August 1990 Texaco Harvest Oil Platform Experiment

The Texaco Harvest Oil Platform Experiment took place August 22–28, 1990, off Point Conception, California. This platform has been designated as the NASA/JPL verification site for the TOPEX radar altimeter, which is to be launched in mid‐1992. The purpose of the experiment was to obtain measurements from GPS and other instrumentation that will be used at the site for the verification activities, and to determine the potential effects of the platform environment on the quality of the measurements. In conjunction with this experiment, a buoy equipped with a GPS receiver was floated in the vicinity of the platform for the purpose of measuring sea‐level change and waves relative to a reference receiver located on the platform. A pressure transducer installed at the site also provided sea‐level change and wave measurements relative to the platform. We present the data collection, processing, and analysis results comparing the GPS‐buoy and pressure transducer data. The GPS‐determined sea‐surface height measurements show 1.3‐cm agreement when compared with transducer‐determined heights taken over the same period of time. Low‐rate (15‐s) data were used to measure the change in sea‐level height due to tides, while high‐rate (1‐s) measurements provided temporal resolution sufficient for determining wave spectra.     

Calibration of TOPEX/Poseidon and Jason Altimeter Data to Construct a Continuous Record of Mean Sea Level Change

Jason, the successor to the TOPEX/POSEIDON (T/P) mission, has been designed to continue seamlessly the decade-long altimetric sea level record initiated by T/P. Intersatellite calibration has determined the relative bias to an accuracy of 1.6 mm rms. Tide gauge calibration of the T/P record during its original mission shows a drift of -0.1 ± 0.4 mm/year. The tide gauge calibration of 20 months of nominal Jason data indicates a drift of -5.7 ± 1.0 mm/year, which may be attributable to errors in the orbit ephemeris and the Jason Microwave Radiometer. The analysis of T/P and Jason altimeter data over the past decade has resulted in a determination of global mean sea level change of +2.8 ± 0.4 mm/year.     

TOPEX/Poseidon and Jason-1: Absolute Calibration in Bass Strait, Australia

Updated absolute calibration results from Bass Strait, Australia, are presented for the TOPEX/Poseidon (T/P) and Jason-1 altimeter missions. Data from an oceanographic mooring array and coastal tide gauge have been used in addition to the previously described episodic GPS buoy deployments. The results represent a significant improvement in absolute bias estimates for the Bass Strait site. The extended methodology has allowed comparison between the altimeter and in situ data on a cycle-by-cycle basis over the duration of the dedicated calibration phase (formation flight period) of the Jason-1 mission. In addition, it has allowed absolute bias results to be extended to include all cycles since the T/P launch, and all Jason-1 data up to cycle 60. Updated estimates and formal 1-sigma uncertainties of the absolute bias computed throughout the formation flight period are 0 ± 14 mm for T/P and +152 + 13 mm for Jason-1 (for the GDR POE orbits). When JPL GPS orbits are used for cycles 1 to 60, the Jason-1 bias estimate is 131 mm, virtually identical to the NASA estimate from the Harvest Platform off California calculated with the GPS orbits and not significantly different to the CNES estimate from Corsica. The inference of geographically correlated errors in the GDR POE orbits (estimated to be approximately 17 mm at Bass Strait) highlights the importance of maintaining globally distributed verification sites and makes it clear that further work is required to improve our understanding of the Jason-1 instrument and algorithm behavior.     

A geodetic investigation of the British sea slope anomaly

Abstract

A project was initiated in 1986 to investigate an apparent significant discrepancy between geodetic and oceanographic leveling determinations of mean sea level around the coast of Great Britain. In oceanographic terms this discrepancy is equivalent to a sea slope in a North‐South direction.

The project, which lasted for 3 years, has been carried out in conjunction with research groups at the University of Edinburgh, the Proudman Oceanographic Laboratory, and the Ordnance Survey of Great Britain. It has involved combining Global Positioning System (GPS)‐derived ellipsoidal height differences with a high‐precision geoid, leading to an independent determination of the orthometric heights of tide gauges along the east coast of Great Britain.

A major GPS campaign was observed in May 1988. Measurements were made at time gauges between Leith and Lowestoft while simultaneously making measurements at fiducial sites. The results of the 1988 and subsequent campaigns are presented and discussed, and details are given of further observation campaigns to monitor the vertical movement of tide gauges around the coast of Britain by GPS.     

Evaluation of vertical crustal movements and sea level changes around Greenland from GPS and tide gauge observations

To better monitor the vertical crustal movements and sea level changes around Greenland, multiple data sources were used in this paper, including global positioning system(GPS), tide gauge, satellite gravimetry, satellite altimetry, glacial isostatic adjustment(GIA). First, the observations of more than 50 GPS stations from the international GNSS service(IGS) and Greenland network(GNET) in 2007–2018 were processed and the common mode error(CME) was eliminated with using the principal component a...     

Steric sea level changes estimated from historical ocean subsurface temperature and salinity analyses

An historical objective analysis of subsurface temperature and salinity was carried out on a monthly basis from 1945 to 2003 using the latest observational databases and a sea surface temperature analysis. In addition, steric sea level changes were mainly examined using outputs of the objective analyses. The objective analysis is a revised version of Ishii et al. and is available at 16 levels in the upper 700 m depth. Artificial errors in the previous analysis during the 1990s have been worked out in the present analysis. The steric sea level computed from the temperature analysis has been verified with tide gauge observations and TOPEX/Poseidon sea surface height data. A correction for crustal movement is applied for tide gauge data along the Japanese coast. The new analysis is suitable for the discussion of global warming. Validation against the tide gauge reveals that the amplitude of thermosteric sea level becomes larger and the agreement improves in comparison with the previous analysis. A substantial part of local sea level rise along the Japanese coast appears to be explained by the thermosteric effect. The thermal expansion averaged in all longitudes from 60°S to 60°N explains at most half of recent sea level rise detected by satellite observation during the last decade. Considerable uncertainties remain in steric sea level, particularly over the southern oceans. Temperature changes within MLD make no effective contribution to steric sea level changes along the Antarctic Circumpolar Current. According to statistics using only reliable profiles of the temperature and salinity analyses, salinity variations are intrinsically important to steric sea level changes in high latitudes and in the Atlantic Ocean. Although data sparseness is severe even in the latest decade, linear trends of global mean thermosteric and halosteric sea level for 1955 to 2003 are estimated to be 0.31 ± 0.07 mm/yr and 0.04 ± 0.01 mm/yr, respectively. These estimates are comparable to those of the former studies.     

Leveling the Sea Surface Using a GPS-Catamaran

In the framework of the TOPEX/Poseidon and Jason-1 CNES-NASA missions, two probative experiments have been conducted at the Corsica absolute calibration site in order to determine the local marine geoid slope under the ascending TOPEX/Poseidon and Jason-1 ground track (No. 85). An improved determination of the geoid slope was needed to better extrapolate the offshore (open-ocean) altimetric data to on-shore tide-gauge locations. This in turn improves the overall precision of the calibration process. The first experiment, in 1998, used GPS buoys. Because the time required to cover the extended area with GPS buoys was thought to be prohibitive, we decided to build a catamaran with two GPS systems onboard. Tracked by a boat at a constant speed, this innovative system permitted us to cover an area of about 20 km long and 5.4 km wide centered on the satellites' ground track. Results from an experiment in 1999 show very good consistency between GPS receivers: filtered sea-surface height differences have a mean bias of -0.2 cm and a standard deviation of 1.2 cm. No systematic error or distortions have been observed and crossover differences have a mean value of 0.2 cm with a standard deviation of 2.7 cm. Comparisons with tide gauges data show a bias of 1.9 cm with a standard deviation of less than 0.5 cm. However, this bias, attributable in large part to the effect of the catamaran speed on the waterline, does not affect the geoid slope determination which is used in the altimeter calibration process. The GPS-deduced geoid slope was then incorporated in the altimeter calibration process, yielding a significant improvement (from 4.9 to 3.3 cm RMS) in the agreement of altimeter bias determinations from repeated overflight measurements.     

Geodetic determination of the surface topography of the Baltic Sea

The Baltic Sea Level Project is an international scientific observation program to unify the vertical datums of the countries of the Baltic Sea with GPS measurements. In total, 35 tide gauges on shores and islands of the Baltic were occupied with GPS in 1993. After computing a new gravimetric geoid over the Baltic Sea, it was possible to unify the datums as well as to calculate the orthometric heights and the sea surface topography values for the tide gauge stations. The results obtained are shown.     

Leveling the Sea Surface Using a GPS-Catamaran Special Issue: Jason-1 Calibration/Validation

In the framework of the TOPEX/Poseidon and Jason-1 CNES-NASA missions, two probative experiments have been conducted at the Corsica absolute calibration site in order to determine the local marine geoid slope under the ascending TOPEX/Poseidon and Jason-1 ground track (No. 85). An improved determination of the geoid slope was needed to better extrapolate the offshore (open-ocean) altimetric data to on-shore tide-gauge locations. This in turn improves the overall precision of the calibration process. The first experiment, in 1998, used GPS buoys. Because the time required to cover the extended area with GPS buoys was thought to be prohibitive, we decided to build a catamaran with two GPS systems onboard. Tracked by a boat at a constant speed, this innovative system permitted us to cover an area of about 20 km long and 5.4 km wide centered on the satellites' ground track. Results from an experiment in 1999 show very good consistency between GPS receivers: filtered sea-surface height differences have a mean bias of ?0.2 cm and a standard deviation of 1.2 cm. No systematic error or distortions have been observed and crossover differences have a mean value of 0.2 cm with a standard deviation of 2.7 cm. Comparisons with tide gauges data show a bias of 1.9 cm with a standard deviation of less than 0.5 cm. However, this bias, attributable in large part to the effect of the catamaran speed on the waterline, does not affect the geoid slope determination which is used in the altimeter calibration process. The GPS-deduced geoid slope was then incorporated in the altimeter calibration process, yielding a significant improvement (from 4.9 to 3.3 cm RMS) in the agreement of altimeter bias determinations from repeated overflight measurements.     

GNSS浮标高程测量精度的影响因素研究

针对高度计定标检验的需求,研制了GNSS浮标,并在天津市于桥水库和威海市石岛镇分别进行了浮标性能测试。通过对影响浮标数据处理精度的因素进行研究,为GNSS浮标数据处理方法建立了完整的技术流程,使其满足高度计定标检验的需求。结果表明:GNSS浮标可以满足高度计定标检验的需求;但需特定的数据处理方法。(1)在基准站数据处理中,卫星截止高度角选择为5°~15°,数据采集时间不少于24 h;(2)浮标数据处理模式选择为自动模式,并对其进行移动平均滤波或中值滤波处理后,流动站解算结果最优;(3)GNSS浮标的水面高程测量精度优于1 cm;(4)受到GNSS本身的限制,当浮标距离GNSS基准站越远,浮标数据的解算精度越低。     

Absolute Calibration of the Jason-1 Altimeter Using UK Tide Gauges

This article describes an “absolute” calibration of Jason-1 (J-1) altimeter sea surface height bias using a method developed for TOPEX/Poseidon (T/P) bias determination reported previously. The method makes use of U.K. tide gauges equipped with Global Positioning System (GPS) receivers to measure sea surface heights at the same time, and in the same geocentric reference frame, as Jason-1 altimetric heights recorded in the nearby ocean. The main time-dependent components of the observed altimeter-minus-gauge height-difference time series are due to the slightly different ocean tides at the gauge and in the ocean. The main harmonic coefficients of the tide differences are calculated from analysis of the copious TOPEX data set and then applied to the determination of T, P, and J-1 bias in turn. Datum connections between the tide gauge and altimetric sea surface heights are made by means of precise, local geoid differences from the EGG97 model. By these means, we have estimated Jason-1 altimeter bias determined from Geophysical Data Record (GDR) data for cycles 1-61 to be 12.9 cm, with an accuracy estimated to be approximately 3 cm on the basis of our earlier work. This J-1 bias value is in close agreement with those determined by other groups, which provides a further confirmation of the validity of our method and of its potential for application in other parts of the world where suitable tide gauge, GPS, and geoid information exist.     

Absolute Calibration of the Jason-1 Altimeter Using UK Tide Gauges

This article describes an “absolute” calibration of Jason-1 (J-1) altimeter sea surface height bias using a method developed for TOPEX/Poseidon (T/P) bias determination reported previously. The method makes use of U.K. tide gauges equipped with Global Positioning System (GPS) receivers to measure sea surface heights at the same time, and in the same geocentric reference frame, as Jason-1 altimetric heights recorded in the nearby ocean. The main time-dependent components of the observed altimeter-minus-gauge height-difference time series are due to the slightly different ocean tides at the gauge and in the ocean. The main harmonic coefficients of the tide differences are calculated from analysis of the copious TOPEX data set and then applied to the determination of T, P, and J-1 bias in turn. Datum connections between the tide gauge and altimetric sea surface heights are made by means of precise, local geoid differences from the EGG97 model. By these means, we have estimated Jason-1 altimeter bias determined from Geophysical Data Record (GDR) data for cycles 1–61 to be 12.9 cm, with an accuracy estimated to be approximately 3 cm on the basis of our earlier work. This J-1 bias value is in close agreement with those determined by other groups, which provides a further confirmation of the validity of our method and of its potential for application in other parts of the world where suitable tide gauge, GPS, and geoid information exist.     

The validation of HY-2 altimetermeasurements of a significant wave height based on buoy data

HY-2 has been launched by China on August 16, 2011 which assembles multi-microwave remote sensing payloads in a body and has the ability of monitoring ocean dynamic environments. The HY-2 satellite data need to be calibrated and validated before being put into use. Based on the in-situ buoys from the Nation- al Data Buoy Center （NDBC）, Ku-band significant wave heights （SWH, hs） of HY-2 altimeter are validated. Eleven months of HY-2 altimeter Level 2 products data are chose from October 1, 2011 to August 29, 2012. Using NDBC 60 buoys yield 902 collocations for HY-2 by adopting collocation criteria of 30 min for tempo- ral window and 50 km for a spatial window. An overall RMS difference of the SWH between HY-2 and buoy data is 0.297 m. A correlation coefficient between these is 0.964. An ordinary least squares （OLS） regression is performed with the buoy data as an independent variable and the altimeter data as a dependent vari- able. The regression equation of hs is hs （HY-2）=0.891 × hs （NDBC）＋0.022. In addition, 2016 collocations are matched with temporal window of 30 rain at the crossing points of HY-2 and Jason-2 orbits. RMS difference of Ku-band SWH between the two data sets is 0.452 m.     

Sea surface height anomaly and geostrophic circulation variations in the South China Sea from TOPEX/POSEIDON altimetry

The sea surface height anomaly (SSHA) and geostrophic circulation in the South ChinaSea (SCS) are studied using TOPEX/POSE1DON (T/P) altimetry data. The SSHA, which is obtained after tidal correction based on the tidal results from T/P data, is predominated by seasonal alternating monsoons. The results reveal that the SSHA in the central part of the SCS is positive in spring and summer, but negative in autumn and winter. It is also found that the SSHA in the SCS can be approached with the sum of tidal constituents SA and SSA. The geostrophic circulations in the SCS are calculated according to sea surface dynamic topography, which is the sum of SSHA and mean sea surface height. It is suggested that the circulation in the upper layer of the SCS is generally cyclonic and notably western intensified during autumn and winter, while the western intensification is weak during spring and summer. It is also indicated that the Kuroshio intrudes into the northeastern SCS throuth the Luzon Strait in winter. But ther