Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams

Laser‐induced graphene (LIG), a graphene structure synthesized by a one‐step process through laser treatment of commercial polyimide (PI) film in an ambient atmosphere, has been shown to be a versatile material in applications ranging from energy storage to water treatment. However, the process as developed produces only a 2D product on the PI substrate. Here, a 3D LIG foam printing process is developed on the basis of laminated object manufacturing, a widely used additive‐manufacturing technique. A subtractive laser‐milling process to yield further refinements to the 3D structures is also developed and shown here. By combining both techniques, various 3D graphene objects are printed. The LIG foams show good electrical conductivity and mechanical strength, as well as viability in various energy storage and flexible electronic sensor applications.     

3D‐Printing Electrolytes for Solid‐State Batteries

Solid‐state batteries have many enticing advantages in terms of safety and stability, but the solid electrolytes upon which these batteries are based typically lead to high cell resistance. Both components of the resistance (interfacial, due to poor contact with electrolytes, and bulk, due to a thick electrolyte) are a result of the rudimentary manufacturing capabilities that exist for solid‐state electrolytes. In general, solid electrolytes are studied as flat pellets with planar interfaces, which minimizes interfacial contact area. Here, multiple ink formulations are developed that enable 3D printing of unique solid electrolyte microstructures with varying properties. These inks are used to 3D‐print a variety of patterns, which are then sintered to reveal thin, nonplanar, intricate architectures composed only of Li₇La₃Zr₂O₁₂ solid electrolyte. Using these 3D‐printing ink formulations to further study and optimize electrolyte structure could lead to solid‐state batteries with dramatically lower full cell resistance and higher energy and power density. In addition, the reported ink compositions could be used as a model recipe for other solid electrolyte or ceramic inks, perhaps enabling 3D printing in related fields.     

3D打印技术研究现状和关键技术EI北大核心CSCD

本文首先简要介绍了3D打印技术的基本原理及分类,然后重点介绍了有关金属材料3D打印的几种方法:电子束熔化成形(EBM)、激光选区熔化成形(SLM)、激光快速成形技术(LDMD)。简述了金属材料3D打印的应用领域及国内外发展情况及研究现状。文章最后结合国内外金属材料3D打印的研究现状,指出金属材料3D打印需要在打印用粉末、金属3D打印设备、3D打印零件无损检测方法、3D打印零件的失效行为和寿命预测等方面进行重点研究,并建立3D打印零件的无损检测标准规范以及3D打印材料全面力学性能数据库。     

粉末钛合金3D打印技术研究进展

粉末钛合金3D打印技术以低成本、易成形、柔性化制备、零件性能优异等优势,近年来成为钛合金近净成形制造领域的研究热点。总结了国内外粉末钛合金3D打印技术的研究进展,包括激光熔化沉积成形技术(LMD)、激光选区熔化成形技术(SLM)、电子束选区熔化成形技术(SEBM)。比较研究了3种成形技术制备的钛合金的组织特点及力学性能,并讨论了粉末钛合金3D打印技术的市场化现状与未来发展趋势。     

Laser‐Induced Graphene: From Discovery to Translation

Laser‐induced graphene (LIG) is a 3D porous material prepared by direct laser writing with a CO₂ laser on carbon materials in ambient atmosphere. This technique combines 3D graphene preparation and patterning into a single step without the need for wet chemical steps. Since its discovery in 2014, LIG has attracted broad research interest, with several papers being published per month using this approach. These serve to delineate the mechanism of the LIG‐forming process and to showcase the translation into many application areas. Herein, the strategies that have been developed to synthesize LIG are summarized, including the control of LIG properties such as porosity, composition, and surface characteristics, and the advancement in methodology to convert diverse carbon precursors into LIG. Taking advantage of the LIG properties, the applications of LIG in broad fields, such as microfluidics, sensors, and electrocatalysts, are highlighted. Finally, future development in biodegradable and biocompatible materials is briefly discussed.     

Progress in 3D Printing of Carbon Materials for Energy‐Related Applications

The additive‐manufacturing (AM) technique, known as three‐dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D‐printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO‐based materials, have been extensively reported for energy‐related applications. In these circumstances, understanding the very recent developments of 3D‐printed carbon materials and their extended applications to address energy‐related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy‐related applications are reviewed, including energy‐storage applications, electronic circuits, and thermal‐energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D‐printing technology based on carbon materials for energy‐related applications and beyond.     

High‐Performance Materials for 3D Printing in Chemical Synthesis Applications

3D printing has emerged as an enabling technology for miniaturization. High‐precision printing techniques such as stereolithography are capable of printing microreactors and lab‐on‐a‐chip devices for efficient parallelization of biological and biochemical reactions under reduced uptake of reactants. In the world of chemistry, however, up until now, miniaturization has played a minor role. The chemical and thermal stability of regular 3D printing resins is insufficient for sustaining the harsh conditions of chemical reactions. Novel material formulations that produce highly stable 3D‐printed chips are highly sought for bringing chemistry up‐to‐date on the development of miniaturization. In this work, a brief review of recent developments in highly stable materials for 3D printing is given. This work focuses on three highly stable 3D‐printable material systems: transparent silicate glasses, ceramics, and fluorinated polymers. It is further demonstrated that 3D printing is also a versatile technique for surface structuring of polymers to enhance their wetting performance. Such micro/nanostructuring is key to selectively wetting surface patterns that are versatile for chemical arrays and droplet synthesis.     

Laser‐Induced Graphene Formation on Wood

Wood as a renewable naturally occurring resource has been the focus of much research and commercial interests in applications ranging from building construction to chemicals production. Here, a facile approach is reported to transform wood into hierarchical porous graphene using CO₂ laser scribing. Studies reveal that the crosslinked lignocellulose structure inherent in wood with higher lignin content is more favorable for the generation of high‐quality graphene than wood with lower lignin content. Because of its high electrical conductivity (≈10 Ω per square), graphene patterned on wood surfaces can be readily fabricated into various high‐performance devices, such as hydrogen evolution and oxygen evolution electrodes for overall water splitting with high reaction rates at low overpotentials, and supercapacitors for energy storage with high capacitance. The versatility of this technique in formation of multifunctional wood hybrids can inspire both research and industrial interest in the development of wood‐derived graphene materials and their nanodevices.     

Flexible,Stretchable, and Transparent Planar Microsupercapacitors Based on 3D Porous Laser‐Induced Graphene

The graphene with 3D porous network structure is directly laser‐induced on polyimide sheets at room temperature in ambient environment by an inexpensive and one‐step method, then transferred to silicon rubber substrate to obtain highly stretchable, transparent, and flexible electrode of the all‐solid‐state planar microsupercapacitors. The electrochemical capacitance properties of the graphene electrodes are further enhanced by nitrogen doping and with conductive poly(3,4‐ethylenedioxythiophene) coating. With excellent flexibility, stretchability, and capacitance properties, the planar microsupercapacitors present a great potential in fashionable and comfortable designs for wearable electronics.     

Oxidized Laser‐Induced Graphene for Efficient Oxygen Electrocatalysis

An efficient metal‐free catalyst is presented for oxygen evolution and reduction based on oxidized laser‐induced graphene (LIG‐O). The oxidation of LIG by O₂ plasma to form LIG‐O boosts its performance in the oxygen evolution reaction (OER), exhibiting a low onset potential of 260 mV with a low Tafel slope of 49 mV dec^?1, as well as an increased activity for the oxygen reduction reaction. Additionally, LIG‐O shows unexpectedly high activity in catalyzing Li₂O₂ decomposition in Li‐O₂ batteries. The overpotential upon charging is decreased from 1.01 V in LIG to 0.63 V in LIG‐O. The oxygen‐containing groups make essential contributions, not only by providing the active sites, but also by facilitating the adsorption of OER intermediates and lowering the activation energy.