由1,1,2,3-四氯丙烯合成一些氟氯化合物

以1,1,2,3-四氯丙烯(1)为原料,合成了多种具有工业价值的氟氯化合物。首先,以叔胺-2HF为氟化试剂,亲核取代1得到3-氟-1,1,2-三氯丙烯(2);随后在AlCl3催化下异构2得到3-氟-2,3,3-三氯丙烯(3),在FeCl3或KCl催化下异构3得到1-氟-1,2,3-三氯丙烯(4);最后在铬基氟化催化剂催化下,气相氟化2高转化地得到2-氯-3,3,3-三氟丙烯(5),在SbCl5催化下,液相氟化3一步得到2-氯-1,1,1,2-四氟丙烷(6)。本文所合成的化合物5和6均是合成新一代环保型制冷剂HFO-1234yf的重要中间体。     

由1,1,2,3-四氯丙烯合成氟氯化合物

以1,1,2,3-四氯丙烯(1)为原料,合成了多种具有工业价值的氟氯化合物。首先,以叔胺-2HF为氟化试剂,亲核取代1得到3-氟-1,1,2-三氯丙烯(2);随后在AlCl3催化下异构2得到3-氟-2,3,3-三氯丙烯(3),在FeCl3或KCl催化下异构3得到1-氟-1,2,3-三氯丙烯(4);最后在铬基氟化催化剂催化下,气相氟化2高转化地得到2-氯-3,3,3-三氟丙烯(5),在SbCl5催化下,液相氟化3一步得到2-氯-1,1,1,2-四氟丙烷(6)。本文所合成的化合物5和6均是合成新一代环保型制冷剂HFO-1234yf的重要中间体。     

由三氟异丙烯基溴化镁制备羧酸

以三氟丙烯和溴为原料加成制得1,2-二溴三氟丙烷,脱溴化氢得到2-溴三氟丙烯,再在一定条件下合成2-溴三氟丙烯的格氏试剂（三氟异丙烯基溴化镁）,与CO2反应最终生成1-溴-2-三氟甲基丙酸。 用碳酸钠溶液萃取的方法得到0.8 g产品,纯度为99.6%,收率为3.6%。 对产物进行了MS、IR、1H NMR和13C NMR等表征,并分析了主要副产物1,2-二氟丙二烯和2,3-二三氟甲基-1,3-丁二烯及其与未反应的2-溴三氟丙烯间的[2+2]或[2+4]环加成反应产物。 确定以2-溴三氟丙烯为原料经格氏反应制羧酸较好的反应条件为：以THF为溶剂,1,2-二溴乙烷作引发剂,制备格氏试剂温度为30 ℃,CO2与格氏试剂反应温度为0 ℃。     

氟对PtSnNaLa/ZSM-5催化剂丙烷脱氢反应性能的影响

在PtSnNaLa/ZSM-5催化剂中引入氟元素,制得用于丙烷脱氢反应的氟改性催化剂,利用X射线衍射(XRD)、NH₃吸脱附(NH₃-TPD)、红外(FT-IR) 、固体核磁(²⁷Al MAS NMR)和程序升温还原(H₂-TPR)等技术手段研究不同氟含量对催化剂的结构、表面酸性和丙烷脱氢反应性能的影响。 结果表明,氟能降低催化剂表面的弱酸强度,增强Pt与载体间的相互作用力,降低反应副产物的选择性,从而提高了产物丙烯的选择性,当氟的添加量为0.2%时,丙烯选择性可达到99.2%。 同时氟的加入易于载体骨架的脱铝,使得Sn组分的还原变得相对容易,但对催化剂结构没有明显的影响。     

3,3,3-三氟丙酸的合成

3,3,3-三氟丙酸是一种新型三氟甲基合成切块,在医药、农药、染料及功能材料等精细化工领域有着广泛的应用。以3,3,3-三氟-1-氯丙烷和Cl₂为原料,在紫外光照下经氯化反应合成了3,3,3-三氟-1,1,1-三氯丙烷,再与Oleum试剂经水解反应合成了3,3,3-三氟丙酸,收率47.7%,其结构经¹H NMR, ¹³C NMR和MS确证。并对反应条件进行了优化。     

2-甲氧基-3-氟-4-碘吡啶的合成

2-甲氧基-3-氟-4-碘吡啶是一个重要的医药化工中间体,其合成路线未见文献报道。以2-甲氧基-3-氟-5-氯吡啶为起始原料,经氢解和碘代两步反应合成标题化合物,总收率62.8%,其结构经¹H NMR, ¹³C NMR和MS确证。     

卤素-镁交换法合成2-三氟甲基丙烯酸

以2-溴-3,3,3-三氟丙烯(1)为原料,经卤素-镁交换反应制得中间体三氟异丙烯基格氏试剂(2);2分别与CO2,正丁醛,苯甲醛和苯甲酰氯反应合成了2-三氟甲基丙烯酸(3a),2-三氟甲基-1-己烯-3-醇(3b),1-苯基-2-三氟甲基-2-丙烯-1-醇(3c)和1-苯基-4-三氟甲基-4-丁烯-1-酮(3d),其中3d为新化合物,其结构经1H NMR,13C NMR,IR,MS和元素分析表征。考察了交换试剂、物料比、温度和反应时间对3a产率的影响。在最优反应条件[以i-Pr Mg Br/Li Cl为交换试剂,1 50 mmol,n(2-溴丙烷)∶n(1)=1.25∶1.00,于-60℃反应2 h]下,3a收率64.3%。     

Fluorinated Dicarboxylic Acids and Transition-metal（ll） Complexes with N-ligands： Synthesis, Characterizations and Crystal Structures

水热法合成了5个新的配位聚合物：[Cd（TFSA）（2,2＇-bpy）2]n（1）,[Mn（HFGA）（phen）2]n（2）,[Co（TFSA）（bpp）2（H2O）2]n（3）,[Zn（TFSA）（bpp）2（H2O）2]n（4）和[Cu（HFGA）（phen）]n（5）（TFSA=四氟丁二酸,HFGA=六氟戊二酸,2,2＇-bpy=2,2＇-联吡啶,phen=1,10-邻菲啰啉,bpp=1,3-二吡啶基丙烷）,通过X射线单晶衍射确定了配合物的晶体结构.配合物1和2具有相似的1D链结构,四氟丁二酸和六氟戊二酸以两个单齿羧基氧原子分别配位于Cd2＋和Mn2＋离子,2,2＇-联吡啶和1,10-邻菲啰啉分别螯合配位于Cd2＋和Mn2＋离子.配合物3和4具有相似的1D链结构,1,3-二吡啶基丙烷以两个端基氮原子桥联金属离子,四氟丁二酸和六氟戊二酸分别以单齿方式配位.配合物5是具有{4.82}拓扑的2D网结构,六氟丁二酸配体通过单齿/双齿-桥联模式连接Cu2＋离子.5个配合物均通过分子间弱作用进一步构筑成3D超分子结构.     

氟丙嘧草酯的合成新工艺

以2-氯-5-硝基苯甲酸甲酯为原料,经还原、缩合得2-氯-5-(乙氧羰基)氨基苯甲酸甲酯(3);3与3-氨基-4,4,4-三氟巴豆酸乙酯进行环合得脲嘧啶环中间体(4);4经甲基化、水解、酰化和缩合反应合成了氟丙嘧草酯,总收率55.2%,纯度99.1%。中间体和产物结构经1H NMR和EI-MS确证。     

甲基酮的二氟同系化-卤化反应:一锅法合成β-卤代-α,α-二氟代酮

以（溴二氟甲基）三甲基硅烷（TMSCF₂Br）为二氟卡宾源,利用其兼具TMS转移特性及自活化特性,仅在催化量的n-Bu₄NBr的催化启动下,直接完成甲基酮的烯醇化-二氟环丙烷化反应以及与卤正离子的开环卤化反应,并使用卤负离子作为卤源,采用其原位氧化形成卤正离子的方法实现了偕二氟环丙烷硅醚的开环-卤化,合成了β-卤代-α,α-二氟代酮类物质.     

Structures and Properties of trans-1,3,3,3-Tetrafluoro- propene (HFO-1234ze) and 2,3,3,3-Tetrafluoropropene (HFO-1234yf) Refrigerants

The refrigerant trans-1,3,3,3-tetrafluoropropene (HFO-1234ze) is used as a replacement for former cooling agents that have been phased-out due to their global warming potential or ozone depleting potential. Although it is used on a large scale, only a few vibrational data and no structural data of HFO-1234ze are known. We report structure determinations based on low-temperature single-crystal X-ray diffraction data as well as gas-phase diffraction data of HFO-1234ze and HFO-1234yf (2,3,3,3-tetrafluoropropene). Furthermore, vibrational spectra of HFO-1234ze in all phases are described. The results are discussed together with quantum-chemical calculations on the PBE0/cc-pVTZ level of theory. Combustion experiments of HFO-1234ze show carbonyl difluoride, carbon dioxide and hydrogen fluoride to be the main combustion products.     

Effect of thermostatic expansion valve tuning on the performance enhancement and environmental impact of a mobile air conditioning system

Journal of Thermal Analysis and Calorimetry - In this work, the performance enhancement of a HFO-1234yf mobile air conditioning (MAC) system with a suction/liquid line heat exchanger (SLHX) was...     

Defluoroalkylation of sp3 C−F Bonds of Industrially Relevant Hydrofluoroolefins

A simple, one-pot procedure is reported for the selective defluoroalkylation of trifluoromethyl alkene derivatives with aldehydes and ketones. The reaction sequence allows construction of a new C−C bond in a highly selective manner from a single sp³ C−F bond of a CF₃ group in the presence of sp² C−F bonds. The scope incorporates industrially relevant fluorocarbons including HFO-1234yf and HFO-1234ze. No catalyst, additives or transition metals are required, rather the methodology relies on a recently developed boron reagent. Remarkably, the boron site of this reagent plays a dual role in the reaction sequence, being nucleophilic at boron in the C−F cleavage step (S_N2’) but electrophilic at boron en route to the carbon–carbon bond-forming step (S_E2’). The duplicitous behaviour is underpinned by a hydrogen atom migration from boron to the carbon atom of a carbene ligand.     

Comparative study of degradation of <Emphasis Type="Italic">trans</Emphasis>-1,3,3,3-trifluoropropene, 2,3,3,3-tetrafluoropropene,perfluoro-3-methylbutanone-2, and sulfur hexafluoride in dielectric-barrier discharge

Degradation of gaseous dielectrics after aging in barrier discharge has been experimentally studied and comparative analysis of their properties has been performed. The gases used as gaseous dielectrics have been trans-1,3,3,3-tetrafluoropropene (HFO-1234ze(E)), 2,3,3,3-tetrafluoropropene (HFO-1234yf), perfluoro-3-methylbutanone-2 CF₃C(O)CF(CF₃)₂, and sulfur hexafluoride SF₆. The product composition of gas degradation before and after 5-h aging in the barrier discharge has been determined by gas chromatography–mass spectrometry and gas chromatography. According to the measurement data, 2,3,3,3-tetrafluoropropene is less prone to degradation and has the highest dielectric strength among the test carbon-containing gases.     

HFO-1234yf as a CF3 Building Block: Synthesis of Trifluoromethyl Quinoline and Chromene Derivatives from Trifluoromethyl-ynones

Trifluoromethyl ynones derived from the refrigerant gas HFO-1234yf (2,3,3,3-tetrafluoropropene) react with nucleophiles via a Michael-type addition process and the allenolate intermediate formed reacts intramolecularly with a carbonyl group to form heterocyclic derivatives. Thus, reaction of 2-amino and 2-hydroxyl benzaldehyde or ketone substrates with trifluoromethyl ynone derivatives gives trifluoromethyl quinoline and chromene products by a one-pot tandem ring closing sequence, forming pharmaceutically relevant structures from an inexpensive starting material without the need for transition metals or column chromatography. The 2-trifluoromethylquinoline products also show unusual fluxional behaviour, which was explored through 2-D NMR and X-ray crystallographic studies.     

Determination of 3-chloro-1,2-propanediol in biological samples by quick-easy-cheap-effective-rugged-and-safe extraction coupled with gas chromatography-mass spectrometry and its biodistribution in rats

3-Chloro-1,2-propanediol is a common food contaminant, but reports on its determination in biological tissues are lacking. In the present study, a method was developed to detect 3-chloro-1,2-propanediol contents in rat tissues by quick-easy-cheap-effective-rugged-and-safe extraction and gas chromatography-mass spectrometry analysis. Biological samples were extracted with ethyl acetate and purified with adsorbents. The optimized adsorbent for each sample was selected from 4–5 combinations of N-propylethylenediamine, octadecylsilane, graphitized carbon black, strong anion exchange, and florisil. Extracted 3-chloro-1,2-propanediol was derivatized with heptafluorobutyric anhydride and subjected to gas chromatography-mass spectrometry. This method had good linearity (correlation coefficients >0.99) in the range of 2–2000 ng/g for blood, kidney, liver, testis, and brain samples. The limits of detection were under 0.8 ng/g; the limits of quantification were 2 ng/g; the recovery rates were 85%–102%; and the matrix effects were 1.98%–7.67%. This method also had good precision. The dynamic changes in 3-chloro-1,2-propanediol in rats gavaged with 20 mg/kg b.w. for 24 h were detected using this method. The 3-chloro-1,2-propanediol content in each tissue sharply increased to a peak, rapidly decreased within 2 h, and stabilized at 12 h. 3-Chloro-1,2-propanediol persisted in the kidney, testis, and liver 24 h after gavage.     

Improved Synthesis of 1-Chloro-6-methoxy-isoquinolin-3-ol and Its Derivatives

A convenient and efficient synthetic route to 1-chloro-6-methoxy-isoquinolin-3-ol and its derivatives is reported. This new method involves carboxylation of 4-methoxy-2-methylbenzonitrile, subsequent conversion of the resulting 2-cyano-5-methoxy-phenylacetic acid to its acid chloride, and acid-promoted cyclization of the 2-cyano-5-methoxy-phenyl-acetyl chloride. This procedure offers a better overall yield than the previously reported route and is also less hazardous and more reproducible.     

Liquid viscosity of low-GWP refrigerant mixtures (R32 + R1234yf) and (R125 + R1234yf)

In this work, the viscosity of R1234yf, (R32 + R1234yf), and (R125 + R1234yf) in one-phase liquid was measured. The combined expanded uncertainty of viscosity measurement apparatus of confidence of 0.95 (k = 2) is about 2.0%. The measurements of mixtures containing (30.0, 50.0, and 70.0) wt% R32 or R125 were carried out between T = (283.0 and 323.0) K (at intervals of T = 5 K) and P = (1.58 and 2.74) MPa, with a moving piston viscometer (VISCOpro 1600, accuracy ±1.0%) and a Coriolis flowmeter (Ultramass MKII, accuracy ±0.001 g/ml). The measured data were correlated with a hard-sphere (RSH) method and the Grunberg and Nissan method. The average absolute deviations are (2.2 and 3.3)% for the (R32 + R1234yf) and (R125 + R1234yf) mixtures by RSH method, (2.8 and 1.3)% for the (R32 + R1234yf) and (R125 + R1234yf) mixtures by Grunberg and Nissan method, while (3.5 and 2.4)% for the (R32 + R1234yf) and (R125 + R1234yf) mixtures by RefProp V9.1, respectively.     

Modified thermal balance method for estimating minimum inerting concentraion of flammable refrigerant mixtures

R1234yf is considered as a better alternative for R134a (the conventional refrigerant) due to its low global warming potential value, while its usage is limited because of its flammability. The flammability of any flammable refrigerant can be reduced by adding dilutants that are inert. Two methods (group contribution method and thermal balance method) were used to estimate the minimum inerting concentration (which decides the flammability zone) of the binary mixtures (refrigerant?+?dilutant). It was observed that the group contribution method and the thermal balance method predicted minimum inerting concentration of the refrigerant mixture (refrigerant?+?dilutant) with an absolute error of more than 50% and 8%, respectively. Therefore, a modified thermal balance method is proposed in this study to estimate the minimum inerting concentration and found that the proposed method predicts the values with reasonable accuracy when compared with the available experimental data. Further, the minimum inerting concentration for the dilutants R125 and R245fa (that are not experimentally known) with R1234yf is estimated. The results indicated that R227ea has better inert effect with R1234yf when compared to other dilutants (R125, R134a and R245fa) considered in this study. It was also found that the critical inerting concentration for R1234yf is 36.5%.

     

Transition metal complexes of 2-amino-3-chloro-5-trifluoromethylpyridine: syntheses,structures, and magnetic properties of [(TMCAPH)2CuBr4] and [(TMCAPH)2CuCl4]

The reaction of CuX₂ (X = Br or Cl) with 2-amino-3-chloro-5-trifluoromethylpyridine in aqueous acids (HX; X = Br or Cl) yields bis(2-amino-3-chloro-5-trifluoromethylpyridinium)tetrabromocuprate(II) (1) and bis(2-amino-3-chloro-5-trifluoromethylpyridinium)tetrachlorocuprate(II) (2). These compounds have been characterized by IR, powder X-ray diffraction (XRD), single crystal XRD, combustion analysis, and temperature-dependent magnetic susceptibility. Compound 1 crystallizes in the monoclinic space group P2₁/c with three ions in the asymmetric unit, whereas 2 crystallizes in the triclinic space group P 1, and the asymmetric unit contains 18 ionic moieties. Both compounds exhibit antiferromagnetic exchange via the double halide exchange pathway and singlet ground states, with stronger exchange observed for 1. Both compounds exhibit multiple potential magnetic exchange pathways, but fitting of the data to available analytical models suggests that the magnetic exchange constants 2J/k _B are ～50 K in 1 and ～6 K in 2, respectively.