中国环流器二号A(HL-2A)超声分子束注入最新结果

HL-2A装置电子回旋共振加热时,氘脉冲超声分子束穿越分界面,等离子体各项重要参数,包括等离子体储能、极向比压、中平面线平均密度、中心密度和温度上升,中子产额急剧增加. 超声分子束注入有可能较常规脉冲送气在台基顶部提供较强的粒子源,被认为是可供ITER替换脉冲送气的加料方法之一. HL-2A装置氢超声分子束注入的平均速度约为1.7km,与溢流(分子流)注入真空的速度测量作了比较. 关键词： 超声分子束注入 托卡马克 飞行时间法 加料     

HL-2A托卡马克超声分子束注入深度和加料效果研究

超声分子束注入深度与加料效率是分子束加料研究中的基本课题.在近期开展的超声分子束注入实验中，发现分子束注入深度与等离子体电子温度和密度、分子束源的气压和温度有直接关系，获得了分子束注入深度的定标律.在低温气体源(液氮冷却)的分子束注入实验中，发现分子束流中形成了团簇，其注入深度超过30 cm，分析了在低温气源分子束注入实验中的团簇现象. 关键词： 超声分子束注入 注入深度 加料效率 团簇     

HL-2A����������ȷ������

对HL-2A装置限制器位形和偏滤器位形下放电气体分别为氘和氦时的等离子体热辐射测量结果做了初步分析,分析结果表明：在偏滤器室注入惰性气体能够有效的降低到达靶板的热辐射;超声分子束注入时,观测到注入粒子在等离子体中输运过程;氦放电时的辐射比值明显高于氘放电时的比值;真空室器壁的处理能够有效地降低辐射损失,硅化对器壁条件的改善效果明显。     

The first results of divertor discharge and supersonic molecular beam injection on the HL-2A tokamak

HL-2A tokamak is the first tokamak with divertors in China. The plasma boundary and the position of the striking point on the target plates of the HL-2A closed divertor were simulated by the current filament code and they were in agreement with the diagnostic results in the divertor. Supersonic molecular beam injection (SMBI) system was first installed and tested on the HL-2A tokamak in 2004. In the present experiment low pressure SMBI fuelling on the HL-2A closed divertor was carried out. The experimental results indicate that the divertor was operated in the `linear regime' and during the period of SMB pulse injection into the HL-2A plasma the power density convected at the target plate surfaces was 0.4 times of that before or after the beam injection. It is a useful fuelling method for decreasing the heat load on the neutralizer plates of the divertor.     

Characteristics of the NASA Lewis Bumpy Torus Plasma Generated with Positive Applied Potentials

Experimental observations have been made during steady-state operation of the NASA Lewis Bumpy Torus experiment at input powers up to 150 kW in deuterium and helium gas, and with positive potentials applied to the midplane electrodes. This steady-state ion heating method utilizes a modified Penning discharge operated in a bumpy torus confinement geometry such that the plasma is acted upon by a combination of strong electric and magnetic fields. Experimental investigation of a deuterium plasma revealed electron temperatures from 14 to 140 eV and ion kinetic temperatures from 160 to 1785 eV. At least two distinct modes of operation exist, each of which is associated with a characteristic range of background pressure and electron temperature. Experimental data show that the average ion residence time in the plasma is virtually independent of the magnetic field strength.     

超声分子束注入密度和宽度对托克马克装置加料深度的影响

基于HL-2A托卡马克装置的真实磁场位形,应用大型边缘等离子体湍流模拟程序BOUT++中的子程序模块trans-neut对不同的超声分子束注入(SMBI)密度和宽度进行模拟.在SMBI过程中,保持单位时间内分子注入个数和注入速度恒定,在恒定通量情况下,通过调整注入分子束密度和宽度来研究SMBI注入深度的变化.研究结果表明:在注入密度较小、注入宽度较大时,SMBI的注入深度更深,分子和原子的分解率和电离率的时空区域较宽.分子分解局域化会抑制全局分解率的增长,而分解局域化又会引发局域分解率的加速增长,进而促进全局分解率的增长,促进效果占优导致在注入速度一定的情况下,恒定通量的分子注入发散角越小,分子注入深度越浅.     

Radial transport dynamics studies of SMBI with a newly developed TPSMBI code

In tokamak plasma fueling, supersonic molecule beam injection(SMBI) with a higher fueling efficiency and a deeper penetration depth than the traditional gas puffing method has been developed and widely applied to many tokamak devices.It is crucial to study the transport dynamics of SMBI to improve its fueling efficiency, especially in the high confinement regime. A new one-dimensional(1D) code of TPSMBI has also been developed recently based on a six-field SMBI model in cylindrical coordinate. It couples plasma density and heat radial transport equations together with neutral density transport equations for both molecules and atoms and momentum radial transport equations for molecules. The dominant particle collisional interactions between plasmas and neutrals, such as molecule dissociation, atom ionization and charge-exchange effects, are included in the model. The code is verified to be correct with analytical solutions and also benchmarked well with the trans-neut module of BOUT++ code. Time-dependent radial transport dynamics and mean profile evolution are studied during SMBI with the TPSMBI code in both slab and cylindrical coordinates. Along the SMBI path, plasma density increases due to particle fuelling, while plasma temperature decreases due to heat cooling. Being different from slab coordinate, the curvature effect leads to larger front densities of molecule and atom during SMBI in cylindrical coordinate simulation.     

Accumulation of deuterium in radiation-damaged tungsten

Experimental studies have been performed to determine the effect of high-level radiation damage on the accumulation of deuterium and erosion of tungsten samples exposed to deuterium plasma. Tungsten samples were exposed first to fast helium ions having an energy of 3–4 MeV (providing from one to ten displacements per atom) and then to deuterium plasma up to a dose of 10²⁵ ion/m². The effects of deformation and modification of the surface microstructure have been observed. The concentrations of helium and deuterium have been measured by the methods of elastic nuclear proton backscattering and nuclear recoil detection of helium ions. A high concentration of deuterium in the damaged layer of a tungsten sample has been measured, and helium has been detected in a layer ～5 μm thick. The proposed method shows promise for determining the lifetime of materials used in fusion reactors and measuring the concentration of tritium accumulated in these materials.     

同轴空心阴极氦等离子体的电子激发温度研究

利用同轴空心阴极放电装置,产生氦低温等离子体。通过对等离子体的发射光谱进行测量和计算,研究放电功率以及氦气压强对等离子体的电子激发温度的影响。结果表明:氦低温等离子体的发射光谱主要由连续谱和原子谱线构成,放电功率和压强对谱线的强度具有明显影响。压强的变化不仅影响电子从电场中获得的能量,还会影响电子与原子的碰撞频率,从而导致电子激发温度随着氦气压强的增大,出现先上升后下降的变化趋势。     

Muon transfer from ground state deuterium to helium nuclei and its temperature dependence

The energy and time distributions of the decay X-rays of excited, metastable, molecular (dμHe)*-resonances were measured. The comparison of the observed energy spectra with calculated ones suggests that decay from the rotational state J = 1 dominates at the investigated conditions. The muon transfer rates from ground state deuterium to the helium isotopes ³He and ⁴He at low temperatures were determined from the time distributions of these spectra. Additionally, the temperature dependence of the muon transfer rate was clearly established in deuterium / ⁴He mixtures. This revised version was published online in August 2006 with corrections to the Cover Date.     

Simulations of the effects of density and temperature profile on SMBI penetration depth based on the HL-2A tokamak configuration

Using the trans-neut module of the BOUT++ code, we study how the fueling penetration depth of supersonic molecular beam injection(SMBI) is affected by plasma density and temperature profiles. The plasma densities and temperatures in L-mode are initialized to be a set of linear profiles with different core plasma densities and temperatures. The plasma profiles are relaxed to a set of steady states with different core plasma densities or temperatures. For a fixed gradient, the steady profiles are characterized by the core plasma density and temperature. The SMBI is investigated based on the final steady profiles with different core plasma densities or temperatures. The simulated results suggest that the SMB injection will be blocked by dense core plasma and high-temperature plasma. Once the core plasma density is set to be N_(i0)= 1.4N_0(N_0= 1 × 10~(19)m~(-3)) it produces a deeper penetration depth. When N_(i0) is increased from 1.4N_0 to 3.9N_0 at intervals of 0.8N_0, keeping a constant core temperature of T_(e0)= 725 eV at the radial position of ψ = 0.65, the penetration depth gradually decreases. Meanwhile, when the density is fixed at N_(i0)= 1.4N_0 and the core plasma temperature T_(e0) is set to 365 eV,the penetration depth increases. The penetration depth decreases as T_(e0) is increased from 365 eV to 2759 eV. Sufficiently large N_(i0) or T_(e0) causes most of the injected molecules to stay in the scrape-off-layer(SOL) region, lowering the fueling efficiency.     

Hot Ion Plasma Heating Experiments in SUMMA

Initial empirical results are presented for the hot-ion plasma heating experiments conducted in the new SUMMA (Superconducting Magnetic Mirror Apparatus) at NASA Lewis Research Center. A discharge was formed by applying a radially inward DC electric field near the mirror throats. Data were obtained at midplane magnetic flux densities from 1.0 to 3.5 tesla. Charge-exchange neutral particle energy analyzer data were reduced to ion temperatures using a plasma model that included a Maxwellian energy distribution super-imposed on an azimuthal drift, finite ion orbits, and radial variations in density and electric field. Using this plasma model, the highest ion temperatures computed were 5 keV, 1.2 keV, and 1 keV for He+, H2+, and H+, respectively. These were obtained at a mid-plane magnetic flux density of 1.6 T. Ion temperature was found to scale roughly as (P/B)n, where P/B is the ratio of power input to magnetic flux density and n is about 1 for hydrogen and 2 for helium. Optical spectroscopy line-broadening measurements yielded ion temperatures about 15 percent higher than the charge-exchange neutral particle analyzer results for hydrogen and about 50 percent higher for helium. Spectroscopically obtained electron temperatures ranged from 3 to 30 eV.     

�ļ����׼Ƶĺ�뮷ֱ�����ʵ��

利用一套四极质谱气体分析与测试系统,开展MicroVision Plus四极质谱计的氦(He)、氘(D2)分辨性能实验。分别向分析室送入He和D2,记录质谱图,得到质量刻度和分辨率等信息。He+峰位为(4.0022±0.0006)amu;D2+峰位为(4.0246±0.0006)amu。在10-6～10-4Pa的分压范围,观察到He和D2的分辨率随其分压强的增大而减小。在10-7Pa-m3-s-1的He漏孔条件下,调节D2送气量,He+/D2+分压峰值比在10-1量级可以分辨出He。     

超声分子束注入模型与流体输运程序的耦合

将超声分子束注入模型加入到流体输运程序ONETWO 中,为ONETWO 程序提供了重要的粒子源和电子、离子热源项。在ONETWO 程序物理模型中加入超声分子束注入模型,修改TPSMBI 程序并将其耦合到 ONETWO 程序中。运用耦合后的ONETWO 程序模拟研究了喷气法与超声分子束注入产生的源项。将超声分子束注入模型加入到ONETWO 程序中不仅可以为相关的实验分析提供一种重要的工具,也可为未来装置(如中国聚变工程实验堆)的物理设计提供重要的粒子和能量源信息。     

HL-2A装置送气和加料的脱靶特性

HL-2A装置辐射偏滤器实验采用边缘补充送气和分子束加料等方法来提高主等离子体密度,降低边缘等离子体温度、增加辐射功率分额,获得脱靶等离子体。偏滤器室内进行主动补充送气或者注入惰性气体杂质,降低偏滤器等离子体温度,获得脱靶等离子体,并首次获得了超声分子束注入产生脱靶等离子体的实验结果。利用HL-2A装置偏滤器同一极向截面内外中性化板上安装的嵌入式探针阵列和偏滤器室安装的电动探针系统,测量了偏滤器靶板上和偏滤器室的等离子体参数及其分布,并进行了相关分析和改善约束以及偏滤器脱靶等离子体运行模式下等离子体行为的研究。     

Effect of helium concentration on irradiation damage of Fe-ion irradiated SIMP steel at 300℃ and 450℃

SIMP steel is newly developed fully martensitic steel for lead-cooled fast reactors and accelerator-driven systems.It is important to evaluate its radiation resistance via high flux neutron irradiation, where dense He atoms can be formed via(n, α) transmutation reaction. Co-irradiation with Fe and He ions, instead of neutron, was performed. Specimens were irradiated with 6.4-Me V Fe ions to the damage dose of 5 dpa at a depth of 600 nm. Three different helium injection ratios of 60-appm He/dpa(dpa: displacements per atom), 200-appm He/dpa and 600-appm He/dpa at a depth of 600 nm,were performed. Two different irradiation temperatures of 300℃ and 450℃ were carried out. The effect of helium concentration on the microstructure of Fe-irradiated SIMP steel was investigated. Microstructural damage was observed using transmission electron microscopy. The formed dislocation loops and bubbles depended on the helium injection ratio and irradiation temperature. Lots of dislocation loops and helium bubbles were homogeneously distributed at 300℃, but not at 450℃. The causes of observed effects are discussed.     

HL-2A 装置超声分子束注入缓解偏滤器靶板上边缘局域模热通量研究

在HL-2A 装置上优化和发展了偏滤器靶板上的红外测温系统,并利用该系统分析了高约束模放电期间边缘局域模的热沉积分布特性。在高约束模式放电期间,超声分子束注入使边缘局域模所引起的偏滤器靶板上瞬间热通量峰值下降了~60%,并伴随着边缘局域模爆发频率增加了2~3 倍,而等离子体储能仅下降了~8%。分析结果表明,大幅度的丝状结构在超声分子束注入之后得到了有效抑制,沉积到偏滤器靶板上的瞬间热通量峰值也随之下降。此外,在超声分子束注入之后偏滤器室内的热辐射损失大幅度增加,从而耗散了热输运所携带的部分能量,进一步分散了沉积到偏滤器靶板上的能量,有效地保护了偏滤器靶板。     

Distribution of Excited Atoms and Ions in a Plasma Generated at the Surface of Ferroelectric Ceramic

The distribution of excited atoms and ions in a plasma generated at the surface of ferroelectric ceramic has been studied. For all studied spectral lines of He I, Ar I, Ar II and hydrogen a decrease of the total line intensity with the increasing distance from the ceramic surface has been found. The shapes of these distributions are characteristic of the specific spectral lines. The distributions for He I lines depend strong on the concentration of argon in the helium — argon mixture. The effect of overpopulation of some excited Ar II ion levels in an argon discharge observed already in a previous work has been found also in the case of a helium — argon plasma.     

一种新型大气压毛细管介质阻挡放电冷等离子体射流技术

介绍一种结构设计简单、操作运行方便的新型毫米量级大气压冷等离子体射流发生技术.这种射流可以在大气压条件下，利用多种工作气体(如Ar,He,N₂)，通过毛细管介质阻挡放电(DBD)的方式实现.使用频率为33kHz，峰值电压为1—12kV的双向脉冲电源，利用Ar,He,N₂等工作气体，在毛细管内形成了稳定的冷等离子体射流.放电区域的光辐射空间分布利用商用CCD摄像机记录，从中研究放电形态和空间分布，观察到了在DBD区域的流动气体放电和在毛细管出口处形成的等离子体射流 关键词： 冷等离子体射流 毛细管介质阻挡放电 射流射程 射流激发温度     

HL-2A װ�ó���������ע�뻺��ƫ�����а��ϱ�Ե����ģ��ͨ���о�

在HL-2A 装置上优化和发展了偏滤器靶板上的红外测温系统,并利用该系统分析了高约束模放电期间边缘局域模的热沉积分布特性。在高约束模式放电期间,超声分子束注入使边缘局域模所引起的偏滤器靶板上瞬间热通量峰值下降了~60%,并伴随着边缘局域模爆发频率增加了2~3 倍,而等离子体储能仅下降了~8%。分析结果表明,大幅度的丝状结构在超声分子束注入之后得到了有效抑制,沉积到偏滤器靶板上的瞬间热通量峰值也随之下降。此外,在超声分子束注入之后偏滤器室内的热辐射损失大幅度增加,从而耗散了热输运所携带的部分能量,进一步分散了沉积到偏滤器靶板上的能量,有效地保护了偏滤器靶板。