Measurement of in-plane displacement by wavelength-modulated heterodyne speckle interferometry

The use of wavelength-modulated light incorporated into an optical-path-difference speckle interferometer is demonstrated as a heterodyne technique for measuring the in-plane displacement of a rough object. The in-plane displacement can be determined from the measured phase variation of the heterodyne speckle signal. We also improved the optical configuration to create a high-contrast interference pattern. Experimental results reveal that the proposed method can detect displacement up to a long range of 220 μm and displacement variation down to the nanometer range. Moreover, the sensitivity can reach up to 0.8°/nm. The performance of the system is discussed.     

Evaluating mixed-mode stress intensity factors from full-field displacement fields obtained by optical methods

A method for evaluating mode I, mode II and mixed-mode stress intensity factors from in-plane displacement fields using the method of nonlinear least-squares is proposed in this paper. Along with stress intensity factors, crack tip location and rigid body displacement components are determined simultaneously from both displacement components obtained using full-field optical methods or numerical methods. The effectiveness is validated by applying the proposed method to mixed-mode displacement fields obtained through digital image correlation, displacement fields obtained by analysis using elasto-plastic finite element method, and displacement fields around a fatigue crack obtained by electronic speckle pattern interferometry. Results show that the proposed method can extract stress intensity factors from the displacement fields both accurately and easily. Furthermore, they can be determined even if the material at a crack tip exhibits small-scale yielding. It is expected that the proposed method is applicable to various fracture problems during experimental and numerical evaluation of structural components.     

Large in-plane displacement measurement in dual-beam speckle interferometry using temporal phase measurement

Abstract

Measurement of in-plane displacements of a diffuse object by observing the temporal fluctuation of the speckle pattern in a dual-beam illumination speckle interferometer is illustrated. To conceive the temporal changes the object is displaced in its plane continuously. A high-speed camera is used to acquire a number of frames of the image of the object motion sequentially. Through Fourier transformation and inverse Fourier transformation of the frames stacked together, the total phase is determined. Finally, the magnitude of the in-plane displacement of the object motion is extracted. The range of displacement that can be measured using this novel method lies between few microns and over 100 μm on the upper end. Theory together with experimental results are presented in this paper.     

Analysis of mutually incoherent symmetrical illumination for electronic speckle pattern shearing interferometry

A speckle shearing interferometer has been designed using symmetrical mutually incoherent illumination, in an effort to provide measurements of in-plane strain. An analysis of the sensitivity to displacement and strain of this interferometer is presented, together with analysis of the optical phase extraction of the resultant fringe pattern. This interferometer is an improvement on previous designs as it provides information on the in-plane strain separated from components of the displacement. Experimental results provide qualitative data in the form of fringe patterns in support of the theoretical analysis.     

Accuracy in electronic speckle photography

Electronic speckle photography is an accurate, easy-to-use, video-based technique for the analysis of two- and three-dimensional deformation fields and in-plane strain fields, based on numerical cross correlation. Through the use of statistical optics, simulated speckle patterns, and experiments the accuracy in electronic speckle photography was found to depend on correlation, speckle size, window size, and correlation filter. The estimated correlation was found to be the combined effect of three mutually competing factors because of classical speckle correlation, subimage overlap, and displacement gradients. In many applications white-light speckle patterns provide a more accurate estimate of the displacement field than do laser speckle patterns.     

Uneven intensity change correction of speckle images using morphological Top-Hat transform in digital image correlation

By comparing two digital speckle images recorded before and after deformation, two-dimensional digital image correlation (DIC) method can accurately determine the in-plane displacement fields and strain fields. In a practical measurement, however, the variance of light source intensity, location and direction will cause the random uneven intensity change of the random speckle images and will lead to the obvious measurement error. Numerical simulation experiment is first carried out to analyse the influence of the recorded speckle images undergoing uneven light variation on DIC measurement accuracy. Then, a correction method for speckle images with uneven intensity change is proposed based on morphological Top-Hat transform. In addition, quantitative measurements of both in-plane rotation of a rigid body and three-point bending beam are investigated experimentally by DIC to verify the feasibility of the correction method. Experimental results show that the measurement accuracy of DIC is improved dramatically after the procedure of uneven light variation correction.     

Speckle interferometry: three-dimensional deformation field measurement with a single interferogram

An electronic speckle interferometer, arranged for out-of-plane sensitivity and with an off-axis reference beam to produce spatial phase bias, is used for three-dimensional deformation field measurements. The complex amplitude of the object wave is calculated by application of a Fourier-transform method to a single interferogram. The change in phase after object deformation yields the out-of-plane component of the displacement field. The two in-plane components are obtained by cross correlation of subimages of the reconstructed object wave's intensity, a method that is also referred to as digital speckle photography. The Fourier-transform algorithm is extended and modified, leading to random measurement errors that are below widely accepted theoretical limits and also to an extended measuring range. These properties and the mutually combined information improve the accuracy of both methods compared with their usual single implementation. The performance is evaluated in experiments with pure out-of-plane, pure in-plane, and combined deformations and compared with theoretical values. An example of a practical application is given.     

Optimum determination of speckle size to be used in electronic speckle pattern interferometry

Characteristics of the fringe pattern detected by an electronic speckle pattern interferometer, in conditions in which a test object deforms in an arbitrary direction and the speckle intensity is detected over a pixel area in the TV camera to be used, have been investigated from two aspects: speckle noise reduction and fringe contrast. The main result is that the fringes are obtained with high contrast and low speckle noise, if the speckle size is selected by the optical system so as to be smaller than the pixel size. This result is applicable to highly accurate measurements of the out-of-plane displacements of the test object, whose in-plane displacement is small.     

Use of digital speckle pattern correlation for strain measurements in a CuAlBe shape memory alloy

A Cu–Al 11.2 wt.%-Be 0.6 wt.% shape memory alloy was subjected to a uniaxial tension test using an MTS load frame with an attached optical microscope. Digital images of the sample's surface were acquired using white light and He–Ne laser illumination. The obtained images were associated to the engineering stress–strain behavior, which was calculated from the measured displacement, strain and force. From the images, displacement vector fields were calculated for white light and laser illumination by digital image correlation (DIC) and digital speckle pattern correlation (DSPC) techniques respectively. Using white light it was possible to observe the grains and the martensitic phase transformation of the material more clearly than using DSPC; nevertheless, better quantitative results of displacement, in-plane strain and elastic moduli were obtained using DSPC than using DIC when they were compared to the reference values measured by electrical extensometry. Furthermore DIC and DSPC work as complementary techniques to determined the micro and macromechanical behavior of the CuAlBe shape memory alloy.     

Phase measurement in temporal speckle pattern interferometry: comparison between the phase-shifting and the Fourier transform methods

The measurement of dynamic displacements by use of speckle pattern interferometry and temporal phase unwrapping allows for the evaluation of large-object displacement fields without the propagation of spatial unwrapping errors. If a temporal carrier is introduced in one of the beams of the interferometer, phase data for whole-object displacement can be retrieved by use of a temporal phase-shifting method or a temporal Fourier transformation approach. We present a comparison between both methods of temporal phase measurement in terms of precision and execution speed. We performed the analysis by using computer-simulated speckle interferograms, an approach that allowed us to know precisely the original phase distribution and also to determine the spatial rms phase error as a function of the phase change introduced between two consecutive speckle interferograms. The performance of both methods to process experimental data is also illustrated by use of the results from a high-speed speckle interferometry study of a carbon fiber panel.     

Systematic and random errors in electronic speckle photography

Electronic speckle photography offers a simple and fast technique for measuring in-plane displacement fields in solid and fluid mechanics. Errors from undersampling, illumination divergence, and displacement magnitude have been analyzed and measured. The nature of the systematic error is such that a drift toward the closest integral pixel value is introduced. Because of the finite extent of the sensor area, considerable undersampling is tolerable before systematic errors occur. The random errors are mainly dependent on the effective ?-number of the imaging system and speckle decorrelation introduced by object displacement. When sampling at a rate of ~ 70% of the Nyquist frequency, we avoided systematic errors and minimized random errors.     

Electronic speckle photography: increased accuracy by nonintegral pixel shifting

Electronic speckle photography offers a simple and fast technique for measuring in-plane displacement fields in solid and fluid mechanics. An improved algorithm is presented and analyzed by use of both computer-simulated speckle patterns and real experiments. The idea of the improved algorithm is to maximize the correlation between correlated subimages from different images by shifting one of them by nonintegral pixel values. The improved algorithm was found to determine displacement components with an uncertainty of less than 1% of a pixel and with negligible systematic errors in ideal experimental conditions.     

Simultaneous measurement of out-of-plane displacement and slope using a multiaperture DSPI system and fast Fourier transform

The simultaneous quantitative measurement of out-of-plane displacement and slope using the fast Fourier transform method with a single three-aperture digital speckle pattern interferometry (DSPI) arrangement is demonstrated. The method coherently combines two sheared object waves with a smooth reference wave at the CCD placed at the image plane of an imaging lens with a three-aperture mask placed in front of it. The apertures also introduce multiple spatial carrier fringes within the speckle. A fast Fourier transform of the image generates seven distinct diffraction halos in the spectrum. By selecting the appropriate halos, one can directly obtain two independent out-of-plane displacement phase maps and a slope phase map from the two speckle images, one before and the second after loading the object. It is also demonstrated that by subtracting the out-of-plane displacement phase maps one can generate the same slope phase map. Experimental results are presented for a circular diaphragm clamped along the edges and loaded at the center.     

Theory and Applications of Dynamic Laser Speckles Due to In-plane Object Motion

The dynamic behaviour of laser speckle caused by uniform in-plane motion of a diffuse object has been studied by deriving the cross-correlation functions of the complex disturbance and the intensity in a field where the speckle is observed. The expressions for the diffraction and the image fields are calculated from general formulae for a linear coherent system. On the basis of these functions two characters in the dynamic behaviour of speckle, a bodily translation and a gradual change in structure, are discussed quantitatively. The velocity of the translation and the rate of the structure change have been derived. As applications of the relations obtained several new methods have been proposed for measuring pattern correlations, MTF of imaging systems, in-plane velocity of diffuse objects, and eye accommodation state.     

Three-dimensional deformation measurement from the combination of in-plane and out-of-plane electronic speckle pattern interferometers

An optical setup that can be switched to produce in-plane and out-of-plane sensitivity interferometers was designed for three-dimensional deformation measuring by electronic speckle pattern interferometry. Divergent illumination is considered in the evaluation of sensitivity vectors to measure both in-plane and out-of-plane displacement components. The combination of these interferometers presents the advantage of greater sensitivity in directions u, v, and w than a typical interferometer with three illumination beams provides. The system and its basic operation are described, and results with an elastic target that is exposed to a mechanical load are reported.     

Depth-resolved whole-field displacement measurement by wavelength-scanning electronic speckle pattern interferometry

We show, for the first time to our knowledge, how wavelength-scanning interferometry can be used to measure depth-resolved displacement fields through semitransparent scattering surfaces. Temporal sequences of speckle interferograms are recorded while the wavelength of the laser is tuned at a constant rate. Fourier transformation of the resultant three-dimensional (3-D) intensity distribution along the time axis reconstructs the scattering potential within the medium, and changes in the 3-D phase distribution measured between two separate scans provide the out-of-plane component of the 3-D displacement field. The principle of the technique is explained in detail and illustrated with a proof-of-principle experiment involving two independently tilted semitransparent scattering surfaces. Results are validated by standard two-beam electronic speckle pattern interferometry.     

Improved speckle projection profilometry for out-of-plane shape measurement

An improved speckle projection profilometry that combines the projection of computer generated random speckle patterns using an ordinary LCD projector and the two-dimensional digital image correlation technique for in-plane displacements measurement is proposed for accurate out-of-plane shape and displacement measurements. The improved technique employs a simple yet effective calibration technique to determine the linear relationship between the out-of-plane height and the measured in-plane displacements. In addition, the iterative spatial domain cross-correlation algorithm, i.e., the improved Newton-Raphson algorithm using the zero-normalized sum of squared differences correlation criterion and the second-order shape function was employed in image correlation analysis for in-plane displacement determination of the projected speckle patterns, which provides more reliable and accurate matching with a higher correlation coefficient. Experimental results of both a regular cylinder and a human hand demonstrate that the proposed technique is easy to implement and can be applied to a practical out-of-plane shape and displacement measurement with high accuracy.     

Real-time heterodyne speckle pattern interferometry using the correlation image sensor

A real-time method for heterodyne speckle pattern interferometry using the correlation image sensor (CIS) is proposed. The CIS demodulates the interference phase of heterodyned speckle wavefronts pixelwise at an ordinary video frame rate. The proposed method neither suffers loss of spatial resolution nor requires a high frame rate. Interferometers for out-of-plane and in-plane deformation are developed with a 200 × 200 pixel CIS camera. Experimental results confirm that the proposed method realizes real-time imaging of a rough-surfaced object under deformation. The average standard deviations of demodulated phase-difference images for the out-of-plane and in-plane interferometers are 0.33 and 0.13 rad, respectively.     

Large deformation mechanical testing of biological membranes using speckle interferometry in transmission. II: Finite element modeling

In holography and speckle interferometry the measurement range is generally limited by the greatest number of fringes that can be resolved in a single image. As a result these techniques have been generally confined to small displacement measurement applications. In the case of out-of-plane measurements one can overcome this limitation by simply adding incremental measurements at individual detector pixels. In the case of in-plane measurements, however, summing incremental measurements is not a straightforward procedure since the interference pattern moves laterally across the detector as the material deforms. We describe a modeling technique based on finite elements which solves this problem. In combination with a full field method such as holography or speckle interferometry, it provides a very sensitive measurement technique with dense spatial sampling and large dynamic range. Experimental results of speckle interferometry operating in transmission to measure in-plane displacements of biological membranes are presented, where total material displacements are of the order of millimeters. The results also demonstrate how the finite strain tensor is calculated analytically from the data at any point on the material.     

Speckle-based three-dimensional velocity measurement using spatial filtering velocimetry

We present an optical method for measuring the real-time three-dimensional (3D) translational velocity of a diffusely scattering rigid object observed through an imaging system. The method is based on a combination of the motion of random speckle patterns and regular fringe patterns. The speckle pattern is formed in the observation plane of the imaging system due to reflection from an area of the object illuminated by a coherent light source. The speckle pattern translates in response to in-plane translation of the object, and the presence of an angular offset reference wave coinciding with the speckle pattern in the observation plane gives rise to interference, resulting in a fringe pattern that translates in response to the out-of-plane translation of the object. Numerical calculations are performed to evaluate the dynamic properties of the intensity distribution and the response of realistic spatial filters designed to measure the three components of the object's translational velocity. Furthermore, experimental data are presented that demonstrate full 3D velocity measurement.