超顺磁性氧化石墨烯复合材料固定辣根过氧化物酶催化去除氯酚（英文）

采用超声辅助共沉淀法成功地将磁性Fe3O4纳米颗粒沉积在氧化石墨烯表面,利用透射电镜、磁滞回归曲线和X射线光电子能谱对材料进行了表征.将该材料作为载体固定辣根过氧化物酶,考察了固定化酶催化2-氯酚、4-氯酚和2,4-二氯酚降解反应,研究了溶液p H值、反应温度、反应时间、H2O2和氯酚浓度以及固定化酶用量对酚类物质去除率的影响.基于取代基数量和位置不同,去除率排序为2-氯酚4-氯酚2,4-二氯酚.另外,采用GC-MS研究了降解过程中的氧化产物.固定化酶的生化性质研究表明,固定化酶比游离酶具有更好的储存稳定性、pH稳定性和热稳定性.经过4次循环利用,固定化酶仍保留66%的活性,说明磁性纳米材料可以分离回收并重复利用,在污水处理领域具有应用前景.     

辣根过氧化物酶反应的化学动力学分析

用辣根过氧化物酶来处理废水中的苯酚和氯酚为许多人所关注。采用停流快速混合技术，利用快速扫描紫外可见分光光度计得到辣根过氧化物酶催化过氧化氢氧化苯酚聚合过程的瞬态光谱数据。对此测量数据矩阵用正交投影及遗传算法解析后，确定体系中产生紫外吸收的物种数，及辣根过氧化物酶中间体形式的纯光谱信息，进而解出反应过程中各组分的动力学曲线。     

磁性纳米粒子固定辣根过氧化物酶的生物传感器

利用FeSO4与FeCl3合成了磁性Fe3O4纳米粒子,并进一步利用3-氨丙基-3-乙氧基硅烷(APS)和戊二醛溶液将辣根过氧化物酶共价固定于该磁性纳米粒子表面,研究了该磁性颗粒的磁学性能,通过磁力将其修饰于固体石蜡碳糊电极表面制成了酶修饰电极。考察了该传感器对H2O2的电化学响应。该生物传感器可对H2O2进行测定,线性范围为1.2×10-7~8.3×10-5mol/L;检出限为4.5×10-8mol/L。利用磁性纳米粒子所制得的酶修饰电极具有催化性能高、稳定性好、造价低和修饰层易更新等优点,有望得到更多的实际应用。     

催化荧光光度法测定辣根过氧化物酶及甲胎蛋白

建立了催化动力学荧光光度法测定辣根过氧化物酶（ＨＲＰ）及人甲胎蛋白（ＡＦＰ）的新方法。在含ＴｒｉｔｏｒＸ－１００的磷酸盐缓冲溶液中,辣根过氧化氢氧化邻苯二胺的产物２,３－二氨基吩嗪的荧光强度有明显的增强。在一定的实验条件下,该产物的荧光强度与ＨＲＰ的量成正比,方法对ＨＲＰ的线性范围为１０～２００pg,线性相关系数为０．９９５６,最低检出下限可达８pg,其相对标准偏差为３．２％（n＝１０）。应用此测定体     

利用对辣根过氧化物酶催化体系的干扰测定左旋多巴

提出辣根过氧化物酶法分析左旋多巴，方法基于一定条件下左旋多巴对辣根过氧化物酶催化对氯苯酚－４－ＡＡＰ偶联发色体系有干扰，干扰程度与左旋多巴的有浓度有相关性。     

固定化辣根过氧化物酶和硫堇的过氧化物传感器

利用卡拉胶水凝胶将辣根过氧化物酶和硫堇同时固定在玻碳电极表面,制备以硫堇为媒介体的过氧化物电化学传感器.包埋在卡拉胶水凝胶中的硫堇在pH=7.0的磷酸缓冲溶液中出现了1对氧化还原峰,氧化峰电位和还原峰电位分别在-0.176和-0.264 V,电位差为88 mV,电流比近似为1,说明硫堇在电极表面发生准可逆的电化学反应.硫堇能作为辣根过氧化物酶催化还原过氧化物中的电子媒介体,加速催化还原过程中的电子传递,减少了催化还原过程中的其它氧化物的干扰.传感器检测过氧化物(过氧化氢、异丙苯基过氧化氢、过氧化丁酮、叔丁基过氧化氢)具有较快的响应时间和良好的灵敏度、重现性、稳定性及较长的使用寿命.     

胶囊固定化辣根过氧化物酶酶促体系引发丙烯酰胺聚合研究

研究了以海藻酸钠／壳聚糖／海藻酸钠为囊壁材料的胶囊固定化辣根过氧化物酶的制备及其影响因素,并将肢囊固定化辣根过氧化物酶／乙酰丙酮／H2O2酶促体系用于引发丙稀酰胺的聚合。结果表明,作为囊壁材料之一的壳聚糖的平均分子量以1万左右为宜,以柠檬三酸钠溶液为溶芯荆的溶芯时间控制在2～4min时,固定化率可达60％,相对于游离酶,其相对活力约为60％。胶囊固定化辣根过氧化物酶／乙酰丙酮／H2O2酶促体系可引发丙稀酰胺的聚合。     

辣根过氧化物酶在表面活性剂膜中的直接电化学

利用3种表面活性剂分别将辣根过氧化氢酶固定在裂解石墨棱面（edge-plane pyrolytic graphite,EPG)电极表面,研究了辣根过氧化物酶（HRP）中Fe(Ⅲ）／Fe（Ⅱ）电对与电极之间的直接电子传递过程以及酶催化双氧化还原过程。实验结果表明：（1）表面活性剂是一种固定酶的理想材料;（2）这种体系可能构造第三代生物传感器,对解释生物体代谢过程具有理论意义,对制备第三代生物传感器具有应用价值。     

凹土-辣根过氧化物酶复合材料制备及其细胞过氧化氢检测

将辣根过氧化物酶(HRP)固定到凹凸棒石粘土(Attapulgite,简称凹土)表面,制得HRP-凹土纳米复合物(HRP-Attapulgite),并采用电化学阻抗、紫外光谱和红外光谱技术表征了HRP固定化过程.HRP-Attapulgite电化学性质测试表明,凹土能促进HRP的直接电子转移,其循环伏安曲线有一对良好的氧化还原峰,峰电位分别为Epc=-370 mV,Epa=-300 mV,式量电位E0′=-335 mV.凹土表面HRP的H2O2响应电流与浓度(0.3~75μmol·L-1)呈线性关系.该电极可用于巨噬细胞中微量H2O2的测定.     

Enzymatic biosensor of horseradish peroxidase immobilized on Au-Pt nanotube/Au-graphene for the simultaneous determination of antioxidants

A new electrochemical method has been proposed for the simultaneous determination of butylated hydroxyanisole (BHA) and propyl gallate (PG) in food matrices based on enzymatic biosensors. Spiny Au-Pt nanotubes (SAP NTs) was first synthesized and demonstrated to exhibit intrinsic peroxidase and catalase-like activity. The structure of SAP NTs provides large surface area and favorable medium for electron transfer, on which HRP were immobilized and acted as enzymatic biosensor for the simultaneous detection of BHA and PG. The results revealed that BHA and PG both have well-defined oxidation waves with peak potentials of 624 and 655 mV, respectively. Under the optimal conditions, the method behaved satisfactory analytical performance towards BHA and PG with a wide linear range of 0.3–50 mg L⁻¹ and 0.1–100 mg L⁻¹, as well as a detection limit of 0.046 mg L⁻¹ and 0.024 mg L⁻¹ (3σ/slope), respectively. Besides, the proposed method exhibits good sensitivity, stability and reproducibility, providing an alternative to fabricate electrode and construct sensitive biosensors.     

Hydrogen peroxide sensor based on horseradish peroxidase immobilized on a silver nanoparticles/cysteamine/gold electrode

A third-generation hydrogen peroxide biosensor was prepared by immobilizing horseradish peroxidase (HRP) on a gold electrode modified with silver nanoparticles. A freshly-cleaned gold electrode was first immersed in a cysteamine–ethanol solution, and then silver nanoparticles were immobilized on the cysteamine monolayer, and finally HRP was adsorbed onto the surfaces of the silver nanoparticles. This self-assemble process was examined via atomic force microscopy (AFM). The immobilized horseradish peroxidase exhibited an excellent electrocatalytic response toward the reduction of hydrogen peroxide. The linear range of the biosensor was 3.3 M to 9.4 mM, and the detection limit was estimated to be 0.78 M. Moreover, the biosensor exhibited a fast response, high sensitivity, good reproducibility, and long-term stability.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in sol–gel-derived tin oxide/gelatin composite films

Horseradish peroxidase (HRP) was immobilized into a new type of sol–gel-derived nano-sized tin oxide/gelatin composite film (SnO₂ composite film) using a sol–gel film/enzyme/sol–gel film “sandwich” configuration. Direct electrochemistry and electrocatalysis of HRP incorporated into the composite films were investigated. HRP/SnO₂ composite film exhibited a pair of stable and quasi-reversible cyclic voltammetric peaks for the HRP Fe(III)/HRP Fe(II) redox couple with a formal potential of about −0.25 V (vs. SCE) in a pH 6.0 phosphate buffer solution. The electron transfer between the enzyme and the underlying electrode was greatly enhanced in the microenvironment with nano-SnO₂ particles and nanoporous structures. Morphologies and microstructures of the composite films and HRP/composite films were characterized with TEM, AFM. Electrochemical impedance spectroscopy (EIS) was also used to feature the HRP incorporated into composite films. FTIR and UV–Vis spectroscopy demonstrated that HRP in the composite film could retain its native secondary structure. With the advantages of organic–inorganic hybrid materials, the HRP/SnO₂ composite film modified electrode displayed good stability and electrocatalytic activity to the reduction of H₂O₂, The apparent Michaelis-Menten constant was estimated to be 0.345 mM, indicating a high affinity of HRP entrapped into the composite film toward H₂O₂.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized on L-glutathione self-assembled monolayers

A novel hydrogen peroxide biosensor has been fabricated based on covalently linked horseradish peroxidase （HRP） onto L- glutathione self-assembled monolayers （SAMs）. The SAMs-based electrode was characterized by electrochemical methods, and direct electrochemistry of HRP can be achieved with formal potential of-0.242 V （vs. saturated Ag/AgCl） in pH 7 phosphate buffer solution （PBS）, the redox peak current is linear to scan rate and rate constant can be calculated to be 0.042 s^-1. The HRP-SAMs- based biosensors show its better electrocatalysis to hydrogen peroxide in the concentration range of 1 × 10^-6 mol/L to 1.2 × 10^-3 mol/L with a detection limit of 4 × 10^-7 mol/L. The apparent Michealis-Menten constant is 3.12 mmol/L. The biosensor can effectively eliminate the interferences of dopamine, ascorbic acid, uric acid, catechol and p-acetaminophen.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in hybrid organic-inorganic film of chitosan/sol-gel/carbon nanotubes

A hybrid organic-inorganic nanocomposite film of chitosan/sol-gel/multi-walled carbon nanotubes was constructed for the immobilization of horseradish peroxidase (HRP). This film was characterized by scanning electron microscopy. Direct electron transfer (DET) and bioelectrocatalysis of HRP incorporated into the composite film were investigated. The results indicate that the film can provide a favorable microenvironment for HRP to perform DET on the surface of glassy carbon electrodes with a pair of quasi-reversible redox waves and to retain its bioelectrocatalytic activity toward H₂O₂.     

Amperometric Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Immobilized on Fe3O4/Chitosan Modified Glassy Carbon Electrode

A new type of amperometric hydrogen peroxide biosensor was constructed based on horseradish peroxidase (HRP) immobilized on Fe₃O₄/chitosan modified glassy carbon electrode. The effects of some experimental variables such as the concentration of supporting electrolyte, pH, enzyme loading, the concentration of the mediator of methylene blue (MB) and the applied potential were investigated. The linear range of the calibration curve for H₂O₂ was 2.0×10^?4–1.2×10^?2 M with a detection limit of 1.0×10^?4 M (S/N=3). The response time was less than 12 s. The apparent Michaelis‐Menten constant K_m was 21.4 mM and it illustrated the excellent biological activity of the fixed enzyme. In addition, the biosensor had long‐time stability and good reproducibility. And this method has been used to determine H₂O₂ concentration in the real sample.     

An amperometric hydrogen peroxide biosensor based on immobilization of horseradish peroxidase on an electrode modified with magnetic dextran microspheres

A new kind of magnetic dextran microsphere (MDMS) with uniform shape and narrow diameter distribution has been prepared from magnetic iron nanoparticles and dextran. Horseradish peroxidase (HRP) was successfully immobilized on the surface of an MDMS-modified glassy-carbon electrode (GCE), and the immobilized HRP displayed excellent electrocatalytic activity in the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ). The effects of experimental variables such as the concentration of HQ, solution pH, and the working potential were investigated for optimum analytical performance. This biosensor had a fast response to H₂O₂ of less than 10 s and an excellent linear relationship was obtained in the concentration range 0.20 μmol L⁻¹–0.68 mmol L⁻¹, with a detection limit of 0.078 μmol L⁻¹ (S/N = 3) under the optimum conditions. The response showed Michaelis–Menten behavior at larger H₂O₂ concentrations, and the apparent Michaelis–Menten constant was estimated to be 1.38 mmol L⁻¹. Moreover, the selectivity, stability, and reproducibility of the biosensor were evaluated, with satisfactory results. Figure Amperometric response of the biosensor to successive additions of H₂O₂ and the plot of amperometric response vs. H₂O₂ concentration     

磁性纳米颗粒固定化细菌纤维素酶的活性和稳定性

在氨水溶液中进行Fe+2和Fe+3离子共沉淀并水热处理后制得磁性纳米颗粒Fe3O4,通过戊二醛活化将纤维素酶固定于其上。采用基于响应面法的Box-Behnken法(BBD)优化了制备条件,如磁性纳米颗粒浓度、戊二醛浓度、酶浓度和交联时间。 BBD分析结果表明,用实验数据可合理调节二次模型。利用生成的基于统计数据的等高线评价了响应面的变化,以理解纳米颗粒和酶活性之间的关系。运用扫描电镜、X射线衍射和红外光谱表征了纳米颗粒上酶的尺寸、结构、形貌和结合情况。采用诸如pH值、温度、重复使用性和存储能力分析了固定化纤维素酶的活性和稳定性。发现固定后的纤维素酶表现出更好的稳定性和活性。     

Rapid removal of anionic organic dye from contaminated water using a poly(3-aminobenzoic acid/graphene oxide/cobalt ferrite) nanocomposite low-cost adsorbent via adsorption techniques

This research study aims to remove hazardous anionic azo dyes (Congo red (CR)) from aqueous solutions via a simple adsorption method using a poly(3-aminobenzoic acid/graphene oxide/cobalt ferrite) nanocomposite (P3ABA/GO/CoFe₂O₄) as a novel and low-cost nanoadsorbent, as synthesized by a simple and straightforward polymerization method. Typically, 3-aminobenzoic acid (3ABA), as monomer, was chemically polymerized with graphene oxide (GO) and cobalt ferrite (CoFe₂O₄) in an aqueous acidic medium containing an ammonium persulfate initiator. The adsorbent P3ABA/GO/CoFe₂O₄ nanocomposite was characterized using various techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, energy-dispersive analysis by X-ray and Brunauer–Emmett–Teller, vibrating sample magnetometer, and zeta potential techniques. These techniques confirmed the interaction between the poly(3-aminobenzoic acid) with GO and CoFe₂O₄ due to the presence of π-π interactions, hydrogen bonding, and electrostatic forces. Herein, the removal efficiency of dye from aqueous solution by the adsorbent was studied according to several parameters such as the pH of the solution, dye concentration, dosage of adsorbent, contact time, and temperature. The adsorption of the dye was fitted using a Langmuir model (R² between 0.9980 and 0.9995) at different temperatures, and a kinetic model that was pseudo-second order (R² = between 0.9993 and 0.9929) at various initial concentrations of CR dye. In addition, the data revealed that the P3ABA/GO/CoFe₂O₄ nanocomposite exhibited a high adsorption capacity (153.92 mg/g) and removal for CR dye (98 %) at pH 5. Thermodynamic results showed the adsorption process was an endothermic and spontaneous reaction. It was found that, in terms of reusability, the P3ABA/GO/CoFe₂O₄ adsorbent can be used for up to six cycles. In this study, P3ABA/GO/CoFe₂O₄ nanocomposites were found to be low cost, and have an excellent removal capability and fast adsorption rate for CR from wastewater via a simple adsorption method. Moreover, this adsorbent nanocomposite could be simply separated from the resultant solution and recycled.