聚苯胺对钯催化甲酸电氧化反应的促进作用（英文）

钯基纳米材料是甲酸电氧化反应的优良催化剂.本工作制备了两个系列钯基催化剂,并考察了聚苯胺对钯上甲酸电氧化反应的助催化作用.一种是以聚苯胺为基底,在其表面电沉积钯纳米粒子,制得n PANI/Pd催化剂(n表示聚合苯胺的循环数);另一种是直接在商业Pd/C催化剂表面电聚合苯胺,制得Pd/C/n PANI催化剂.结果显示,聚苯胺单独存在时对甲酸电氧化反应没有催化活性,但其可对钯上甲酸电氧化反应呈现明显的促进作用,且促进作用与聚苯胺的厚度(聚合循环数)密切相关.在两个系列催化剂中,15PANI/Pd和Pd/C/20PANI显示出最高的催化性能.15PANI/Pd中钯的质量比催化活性是纯钯催化剂的7.5倍;Pd/C/20PANI中钯的质量比催化活性和本征催化活性分别是商业Pd/C催化剂的2.3和3.3倍.钯催化性能的提升与聚苯胺和钯纳米粒子间的电子效应有关.     

利用石墨烯-炭黑组成的二元碳载体增强甲酸在钯催化剂上电化学氧化的活性

本文采用"一锅法"将氧化石墨烯(GO)、炭黑(C)和钯离子用NaBH4共还原,制备了石墨烯-炭黑二元载体(Gr-C)负载的钯催化剂(20%Pd/Gr-C),用于催化甲酸的电氧化反应.电化学测试结果表明,前驱体GO和C的质量比为3:7的Pd/Gr0.3C0.7催化剂催化活性最好,它的峰电流密度(102.14 mA mgPd-1)约为Pd/C催化剂(34.40 mA mgPd-1)的3倍,为钯/石墨烯催化剂(Pd/Gr,38.50 mA mgPd-1)的2.6倍.甲酸在Pd/Gr0.3C0.7催化剂电极直接氧化时的峰电位比Pd/C催化剂的峰电位负移约120 mV,比Pd/Gr催化剂的峰电位负移约70 mV.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、拉曼光谱、电感耦合等离子发射光谱(ICP-AES)等手段对催化剂进行了表征.从SEM图像可以观察到,球形的炭黑团簇聚集在具有褶皱的石墨烯面上,形成了炭黑团簇/石墨烯三维立体结构,有效地抑制了相邻石墨烯层在范德华力作用下的吸引聚集和堆叠造成的石墨烯表面积减小,减小了单层石墨烯叠合成为多层石墨所造成的导电性损失,避免了相邻石墨烯片叠合形成封闭空间,有助于反应物和产物分子的运动.载体的三维结构使反应物分子更容易到达钯纳米粒子,有利于催化性能的提高.XPS结果也证实了二元Gr-C载体对Pd催化的促进作用.Pd/Gr0.3C0.7催化剂的Pd 3d5/2峰发生了右移,表明Pd 3d电子结合能正移,Pd 3d电子云密度降低.具有较低的3d电子云密度的Pd不易与甲酸氧化过程中吸附的中间体(COOH)ads结合,钯催化剂上(COOH)ads表面覆盖率降低,从而使甲酸更容易直接脱氢氧化生成CO2,有利于甲酸通过直接途径进行电化学氧化.与Pd/C,Pd/Gr相比,Pd/Gr0.3C0.7催化剂对甲酸电氧化有最好的催化活性.Pd/Gr0.3C0.7催化剂优异的催化活性可归因于其内在的三维纳米结构:炭黑团簇有效地抑制了石墨烯纳米片的聚集,保持了其大的比表面积和高导电性,促进了反应物和产物分子的运动.此外,Pd纳米粒子与二元载体之间的强相互作用降低了Pd的3d电子云密度,使甲酸氧化主要经直接途径进行.本文证实了钯金属和石墨烯-炭黑二元载体之间的强相互作用,提供了简单和高性价比的方法以提高钯基催化剂的活性,有利于工业化的应用.     

利用石墨烯-炭黑组成的二元碳载体增强甲酸在钯催化剂上电化学氧化的活性（英文）

本文采用"一锅法"将氧化石墨烯(GO)、炭黑(C)和钯离子用NaBH4共还原,制备了石墨烯-炭黑二元载体(Gr-C)负载的钯催化剂(20%Pd/Gr-C),用于催化甲酸的电氧化反应.电化学测试结果表明,前驱体GO和C的质量比为3:7的Pd/Gr_(0.3)C_(0.7)催化剂催化活性最好,它的峰电流密度(102.14 mA mgPd~(-1))约为Pd/C催化剂(34.40 mA mgPd~(-1))的3倍,为钯/石墨烯催化剂(Pd/Gr,38.50 mA mgPd~(-1))的2.6倍.甲酸在Pd/Gr_(0.3)C_(0.7)催化剂电极直接氧化时的峰电位比Pd/C催化剂的峰电位负移约120mV,比Pd/Gr催化剂的峰电位负移约70 mV.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、拉曼光谱、电感耦合等离子发射光谱(ICP-AES)等手段对催化剂进行了表征.从SEM图像可以观察到,球形的炭黑团簇聚集在具有褶皱的石墨烯面上,形成了炭黑团簇/石墨烯三维立体结构,有效地抑制了相邻石墨烯层在范德华力作用下的吸引聚集和堆叠造成的石墨烯表面积减小,减小了单层石墨烯叠合成为多层石墨所造成的导电性损失,避免了相邻石墨烯片叠合形成封闭空间,有助于反应物和产物分子的运动.载体的三维结构使反应物分子更容易到达钯纳米粒子,有利于催化性能的提高.XPS结果也证实了二元Gr-C载体对Pd催化的促进作用.Pd/Gr_(0.3)C_(0.7)催化剂的Pd 3d5/2峰发生了右移,表明Pd 3d电子结合能正移,Pd 3d电子云密度降低.具有较低的3d电子云密度的Pd不易与甲酸氧化过程中吸附的中间体(COOH)ads结合,钯催化剂上(COOH)ads表面覆盖率降低,从而使甲酸更容易直接脱氢氧化生成CO_2,有利于甲酸通过直接途径进行电化学氧化.与Pd/C,Pd/Gr相比,Pd/Gr_(0.3)C_(0.7)催化剂对甲酸电氧化有最好的催化活性.Pd/Gr_(0.3)C_(0.7)催化剂优异的催化活性可归因于其内在的三维纳米结构:炭黑团簇有效地抑制了石墨烯纳米片的聚集,保持了其大的比表面积和高导电性,促进了反应物和产物分子的运动.此外,Pd纳米粒子与二元载体之间的强相互作用降低了Pd的3d电子云密度,使甲酸氧化主要经直接途径进行.本文证实了钯金属和石墨烯-炭黑二元载体之间的强相互作用,提供了简单和高性价比的方法以提高钯基催化剂的活性,有利于工业化的应用     

超支化聚合物氮修饰Pd催化剂促进甲酸电催化氧化

通过原位聚合法制备了以超支化聚合物的氮修饰的PdN_x/C催化剂, 并考察了其催化甲酸电氧化反应的性能. 采用透射电子显微镜(TEM)、 X射线光电子能谱(XPS)和X射线衍射(XRD)等技术研究了氮的引入对催化活性组分Pd的形貌及表面电子形态的影响. 结果表明, 修饰氮后Pd纳米粒子粒径可稳定在2 nm, 并且保持了较高的分散度, 改善了表面Pd电子状态. 与Pd/C催化剂相比, 氮修饰的PdN₂₀/C用于甲酸电氧化的Pd单位质量比活性提高了10.9%.     

Pt微粒修饰纳米纤维聚苯胺电极对甲醇氧化电催化

以脉冲电流法制备的纳米纤维状聚苯胺(PANI)为Pt催化剂载体，用它制备了甲醇阳极氧化的催化电极Pt/（nano-fibular PANI）.研究结果表明, Pt/（nano-fibular PANI）电极对甲醇氧化具有很好的电催化活性,并有协同催化作用.在相同的Pt载量条件下， Pt/（nano-fibular PANI）电极比Pt微粒修饰的颗粒状聚苯胺电极Pt/(granular PANI)具有更好的电催化活性.此外， Pt的电沉积修饰方法同样影响Pt/（nano-fibular PANI）电极对甲醇氧化的催化活性.脉冲电流法沉积Pt形成的复合电极较循环伏安法电沉积得到的Pt复合电极具有更优异的催化活性.     

高分散的炭载Au纳米催化剂的制备、表征和催化活性

采用柠檬酸钠还原-胶体负载法, 制备了高分散的炭载Au纳米催化剂, 并以液相催化氧化葡萄糖为葡萄糖酸钠的反应评价了Au/C催化剂的活性. 研究结果表明, 金溶胶制备过程中柠檬酸钠的用量对粒子尺寸以及所获催化剂的催化活性有重要影响; 催化剂在多次使用之后活性的降低可能是由于在活性炭表面金粒子活性位点上形成的Au^δ＋-O^δ－化合态减少的缘故. 同时比较了制备的Au/C和商业Pd/C催化剂对葡萄糖的液相催化氧化反应, 证明Au/C催化剂明显优于Pd/C催化剂.     

静电纺丝制备钯负载聚苯胺纳米管及其对水合肼的催化氧化

在电纺丝聚苯乙烯(PS)纤维上进行苯胺聚合,随后经过聚苯乙烯溶解,获得聚苯胺(PANI)纳米管。PANI纳米管在PdCl2的酸性溶液中浸泡吸附,并用NaBH4还原得到Pd纳米负载的聚苯胺(PANI-Pd)纳米管复合材料。扫描电镜证明PANI纳米管的形成及表面Pd纳米粒子的沉积。以该PANI-Pd复合材料制备PANI-Pd修饰玻碳电极,并采用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了该修饰电极对水合肼的催化氧化。实验发现,PdCl2的浓度影响Pd纳米粒子的沉积及其修饰电极对肼的催化性能,当PdCl2浓度为10mmol/L时,制得的PANI-Pd纳米管修饰电极对水合肼的催化性能最佳。在优化条件下,在0.1mol/L磷酸盐缓冲溶液(pH=7.0)中,水合肼的催化电流与浓度在2.0×10-5~1.0×10-4 mol/L和3.0×10-4~7.0×10-3 mol/L范围内呈良好的线性关系,检测限为2.0×10-6 mol/L。该电极可实际应用于水合肼的检测。     

碳载PdPb催化剂的制备及对甲酸氧化的电催化性能

采用液相还原共沉积法制备出高活性纳米电催化剂PdPb/C, 研究发现, 碳载Pd催化剂中加入Pb能够提高催化剂对甲酸的电氧化活性, 并改变甲酸氧化的反应机理. 少量Pb的加入能够提高催化剂中活性粒子的分散度, 且大幅度提高催化剂对甲酸氧化的电催化活性. 当催化剂中Pd与Pb的质量比为8: 1时, 对甲酸的电氧化活性最高, 峰电流密度约为Pd/C催化剂上的180%; 而当Pd与Pb的质量比为2: 1时, 催化剂对甲酸氧化的稳定性最好.     

中空介孔三氧化钨微球载钯催化剂的甲酸氧化电催化性能(英文)

采用喷雾干燥法和焙烧处理制备中空介孔三氧化钨微球(HMTTS),在其表面进一步负载活性成分Pd,得到纳米Pd/HMTTS复合催化剂.采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)等对催化剂的形貌和晶型结构进行了表征.结果表明,Pd纳米粒子为面心立方晶体结构,均匀地分布在HMTTS表面.采用循环伏安和计时电流法研究了在酸性溶液中Pd/HMTTS催化剂对甲酸的电催化氧化性能,结果表明Pd/HMTTS催化剂比普通的三氧化钨载钯催化剂(Pd/WO3)对甲酸呈现出更高的电催化氧化活性和稳定性.HMTTS独特的中空介孔结构和表面特性以及氢溢流效应有利于甲酸在钯表面的直接脱氢氧化过程的发生.     

铂微粒修饰碳纳米管-纳米TiO2/聚苯胺复合膜电极的制备及其电化学性能

采用循环伏安法,在200 mmol.L-1苯胺与500 mmol.L-1H2SO4的混合溶液中,在-0.1 V~0.9 V扫描(50 mV.s-1),实现了苯胺在碳纳米管-纳米TiO2膜电极上的电化学聚合,得到翠绿色的聚苯胺膜(PANI),并用交流阻抗谱对PANI的电化学性质进行了表征。在PANI电极上修饰铂,制得铂微粒修饰PANI电极(PANI-Pt)。研究发现PANI-Pt对抗坏血酸的氧化有很高的催化活性。     

Template-Oriented Polyaniline-Supported Palladium Nanoclusters for Reductive Homocoupling of Furfural Derivatives

Developing well-defined structures and desired properties for porous organic polymer (POP) supported catalysts by controlling their composition, size, and morphology is of great significance. Herein, we report a preparation of polyaniline (PANI) supported Pd nanoparticles (NPs) with controllable structure and morphology. The protocol involves the introduction of MnO₂ with different crystal structures (α, β, γ, δ, ϵ) serving as both the reaction template and the oxidant. The different forms of MnO₂ each convert aniline to a PANI that contains a unique regular distribution of benzene and quinone. This leads to the Pd/PANI catalysts with different charge transfer properties between Pd and PANI, as well as different dispersions of the metal NPs. In this case, the Pd/ϵ-PANI catalyst greatly improves the turnover frequency (TOF; to 88.3 h⁻¹), in the reductive coupling of furfural derivatives to potential bio-based plasticizers. Systematic characterizations reveal the unique oxidation state of the support in the Pd/ϵ-PANI catalyst and coordination mode of Pd that drives the formation of highly dispersed Pd nanoclusters. Density functional theory (DFT) calculations show the more electron rich Pd/PANI catalyst has the lower energy barrier in the oxidative addition step, which favors the C−C coupling reaction.     

A general strategy to the synthesis of carbon-supported PdM(M=Co,Fe and Ni) nanodendrites as high-performance electrocatalysts for formic acid oxidation

Rational synthesis of a new class of electrocatalysts with high-performance and low-cost is of great significance for future fuel cell devices. Herein, we demonstrate a general one-step simultaneous reduction method to prepare carbon-supported Pd M(M = Co, Fe, Ni) alloyed nanodendrites with the assistance of oleylamine and octadecylene. The morphology, structure and composition of the obtained Pd M nanodendrites/C catalysts have been fully characterized. The combination of the dendritic structural feature and alloyed synergy offer higher atomic utilization efficiency, excellent catalytic activity and enhanced stability for the formic acid oxidation reaction(FAOR). Strikingly, the as-synthesized Pd Co nanodendrites/C catalyst could afford a mass current density of 2467.7 A g~(-1), which is almost 3.53 and 10.4 times higher than those of lab-made Pd/C sample(698.3 A g~(-1)) and commercial Pd/C catalyst(237.6 A g~(-1)), respectively. Furthermore, the PdC o nanodendrites/C catalyst also exhibit superior stability relative to the Pd/C catalysts, make it a promising anodic electrocatalyst in practical fuel cells in the future. Additionally, the present feasible synthetic approach is anticipated to provide a versatile strategy toward the preparation of other metal alloy nanodendrites/carbon nanohybrids.     

Role of polyaniline morphology in Pd particles dispersion. Hydrogenation of alkynes in the presence of Pd-polyaniline catalysts

Two polyaniline (PANI) samples of various molecular masses were used for the preparation of palladium catalysts (with 2 mass % of Pd). The physicochemical features of starting polyanilines were found to substantially affect the size and extent of palladium nanoparticles aggregation. Strongly aggregated large palladium particles appeared in the PANI sample of more compact morphology (PANI-H), higher crystallinity and lower specific surface area. Pd nanoparticles of a definitively smaller size were formed in the more amorphous PANI sample of looser morphology (PANI-L) and the extent of particles aggregation was markedly lower. The catalytic properties of Pd/PANI samples were studied in a liquid phase hydrogenation of unsaturated triple bond (C≡C) in alkynes reactants, phenylacetylene, and cyclohexylacetylene. The 2 mass % Pd/PANI-L catalyst prepared using polymer of less compact texture exhibited much higher activity in both reactions. In the presence of the 2 mass % Pd/PANI-L catalyst, alkene products were formed with a high selectivity (approximately 90 %) attained at the almost complete conversion of alkynes. This highly selective hydrogenation of the C≡C to the C=C bond was related to the presence of an electroactive polymer, PANI, in close proximity with Pd active sites. Polyaniline could have a role in a steric effect as well as in a modification of adsorptive properties of Pd centres.     

炭载Pt-Ag双金属催化剂对甲醇氧化反应的电催化

以NaBH4为还原剂,将K2PtCl6和AgNO3前体进行共还原制备了一系列具有不同组成的碳载PtmAg/C合金催化剂（m为Pt/Ag原子比,m为0.05～1.0）,在酸性介质中考察了该系列催化剂对甲醇氧化反应的电催化性能。 与单组分Pt/C催化剂相比,系列PtmAg/C催化剂呈现出较高的催化氧化甲醇的活性与抗CO毒化能力,而且该催化剂的性能与其组成密切相关。 随m值增加,PtmAg/C催化剂对甲醇氧化反应的质量比催化活性(MSA)、本征催化活性(IA)与稳定性均逐步增加,当m=0.5时催化活性达到最高,其MSA和IA分别是Pt/C催化剂的5.1和4.8倍。     

单原子分散的Ir-N-C燃料电池阳极抗中毒催化剂

燃料电池的阳极抗中毒研究是重要课题,探索具有超高质量活性和抗CO毒化的阳极催化剂具有显著的科学意义和应用价值。本文成功制备了Ir原子级别分散在N掺杂碳的载体上的新催化剂,并且发现该Ir-N-C对甲酸具有良好的电催化氧化性能,其质量比活性为商业Pd/C的48倍。组装了燃料电池单电池进行测试,结果显示,Ir-N-C催化剂在单电池中的质量比功率密度高达281 mW/mg,较商业Pd/C催化剂提升了3倍。同时,Ir-N-C对CO毒化的耐受性大大增强,经过14000 s的长期测试后,其活性仅衰减68%,优于商业Pd/C催化剂（衰减85%）。并且,该催化剂能够简单有效的大批量制备,为单原子催化剂的大批量制备提供了新思路。     

甲醇羰基化制醋酸镍基双金属催化剂的研究

在ＮｉＣ催化剂中分别添加了九种不同的金属组分,在加压和碘甲烷助剂的存在下考察了第二金属组分及含量对甲醇羰基化反应性能的影响。结果表明：分别添加Ｐｄ、Ｍｏ、Ｌａ三种组分可不同程度地提高ＮｉＣ催化剂的羰基化活性,其中以Ｐｄ的效果最佳,Ｎｉ和Ｐｄ之间存在着明显的相互作用。Ｐｄ含量为１％时,羰基化活性达到最高,甲醇转化率和醋酸收率分别为９２４０％和４９７３％。Ｎｉ－ＰｄＣ双金属催化剂的活性中心主要为Ｎｉ０,还有少量Ｐｄ０存在,Ｐｄ能够显著促进ＮｉＯ的还原,这可能是氢溢流现象所致     

Heck and Suzuki–Miyaura couplings catalyzed by nanosized palladium in polyaniline

A novel route to prepare polyaniline (PANI)‐supported Pd(0) nanoparticles by a one‐pot chemical route is presented. Nanosized Pd(0) particles were first prepared by reduction of Pd(OAc)₂ using t‐BuONa activated sodium hydride in refluxing THF. A ligand exchange with aniline on t‐BuONa‐stabilized Pd(0) particles yielded aniline‐stabilized particles. Pd(0)/PANI nanocomposites were finally obtained by polymerizing aniline‐stabilized Pd(0) particles using ammonium persulfate. Nanocomposites were characterized by transmission electron microscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy. Results show that this one‐pot experimental route is successful in producing hybrid materials constituted of Pd(0) nanoparticles stabilized by PANI due to the strong binding of PANI amine groups to Pd(0) particles. TEM images of the nanohybrids show that metal particles with diameters of ca. 4.9 nm are homogeneously dispersed in PANI. The preliminary results indicate that the Pd(0) particles supported on PANI behave as efficient heterogeneous catalysts in the Heck and Suzuki–Miyaura reactions of aryl iodides. Copyright © 2005 John Wiley & Sons, Ltd.     

The polymer incarcerated method for the preparation of highly active heterogeneous palladium catalysts

A new method named "the polymer incarcerated (PI) method" for preparing a heterogeneous palladium catalyst has been developed. The method is operationally simple, and the Pd catalyst prepared (PI Pd) is highly active for hydrogenation, carbon-carbon, and carbon-oxygen bond-forming reactions. Remarkable points are that the activity of PI Pd is higher than that of homogeneous Pd catalysts and that PI Pd is recovered by simple filtration and reused several times without loss of activity. The catalyst is expected to replace many heterogeneous palladium catalysts, especially Pd/C, which is often used in academia and industry, but recovery of which is difficult.     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

Pt单层修饰Pd/C氧还原催化剂

分别利用液相热解法和浸渍还原法制备了碳载钯纳米催化剂（Pd/C）,并研究了其对氧还原反应的电催化活性。与浸渍还原法相比,液相热解法得到的Pd/C催化剂虽然粒径较大,但表现出较好的氧还原反应（ORR）活性和稳定性.在所制备的Pd/C催化剂基础上,通过置换欠电势沉积的Cu原子单层,获得了Pt单层修饰的Pd/C催化剂,其ORR活性较Pd/C催化剂有显著提高,且与纯Pt/C催化剂接近,而其耐久性则较纯Pt/C催化剂有显著提升,显示出Pt单层催化剂的潜在优势.