Evaluation of municipal solid waste composting kinetics

Most modern municipal solid waste (MSW) composting operations have emphasized the enhancement of decomposition of the organic fraction of the waste to comply with strict environmental regulations. This can be achieved once the composting process kinetics are well understood. This study examined process kinetics through experimentation with bench-scale reactors under controlled composting conditions to show the interdependence between biological, chemical and physical factors during composting of MSW. The effects of temperature, moisture content, waste particle size and carbon to nitrogen (C/N) ratio on process kinetics were evaluated. The results obtained revealed that these factors should be carefully controlled in order to achieve optimum process performance. It has been found that the organic matter degradation during composting follows a first-order kinetic model.     

Options for management of municipal solid waste in New York City: a preliminary comparison of health risks and policy implications

Landfill disposal and waste-to-energy (WTE) incineration remain the two principal options for managing municipal solid waste (MSW). One critical determinant of the acceptability of these options is the different health risks associated with each. In this analysis relying on published data and exposure modeling, we have performed health risk assessments for landfill disposal versus WTE treatment options for the management of New York City's MSW. These are based on the realistic scenario of using a waste transfer station (WTS) in Brooklyn and then transporting the untreated MSW by truck to a landfill in Pennsylvania or using a WTE facility in Brooklyn and then transporting the resultant ash by truck to a landfill in Pennsylvania. The overall results indicate that the individual cancer risks for both options would be considered generally acceptable, although the risk from landfilling is approximately 5 times greater than from WTE treatment; the individual non-cancer health risks for both options would be considered generally unacceptable, although once again the risk from landfilling is approximately 5 times greater than from WTE treatment. If one considers only the population in Brooklyn that would be directly affected by the siting of either a WTS or a WTE facility in their immediate neighborhood, individual cancer and non-cancer health risks for both options would be considered generally acceptable, but risks for the former remain considerably higher than for the latter. These results should be considered preliminary due to several limitations of this study such as: consideration of risks only from inhalation exposures; assumption that only volume and not composition of the waste stream is altered by WTE treatment; reliance on data from the literature rather than actual measurements of the sites considered, assuming comparability of the sites. However, the results of studies such as this, in conjunction with ecological, socioeconomic and equity considerations, should prove useful to environmental managers, regulators, policy makers, community representatives and other stakeholders in making sound and acceptable decisions regarding the optimal handling of MSW.     

Variation in some chemical parameters and organic matter in soils regenerated by the addition of municipal solid waste

The organic fraction of a municipal solid waste was added in different doses to an eroded soil formed of loam and with no vegetal cover. After three years, the changes in macronutrient content and the chemical-structural composition of its organic matter were studied. The addition of the organic fraction from a municipal solid waste had a positive effect on soil regeneration, the treated soils being covered with spontaneous vegetation from 1 yr onwards. An increase in electrical conductivity and a fall in pH were noted in the treated soils as were increases in macronutrients, particularly N and available P and the different carbon fractions. Optical density measurements of the organic matter extracted with sodium pyrophosphate showed that the treated soils contained an organic matter with less condensed compounds and with a greater tendency to evolve than the control. A pyrolysis-gas chromatography study of the organic matter extracted with pyrophosphate showed large quantities of benzene both in the treated soils and control; pyrrole was also relatively abundant, although this fragment decreased as the dose rose. Xylenes and pyridine were present in greater quantities in the control and furfural in the treated soils. Three years after addition to the soil, the organic matter had a higher proportion of fragments derived from aromatic compounds and a smaller proportion derived from hydrocarbons. Similarity indices showed that, although the added and newly formed organic matter 3 yr after addition continued to differ from that of the original soil and to be more mineralizable, the transformations it has undergone made it more similar to the original organic matter of the soil than it was at the moment of being added.     

A generic comparison of the airborne risks to human health from landfill and incinerator disposal of municipal solid waste

A comparison of the potential risks to human health from municipal solid waste (MSW) incineration and landfill on a generic basis is attempted. For this purpose a 'worst case' approach is adopted and a number of assumptions regarding the size and activities of each waste disposal method are made. The airborne pollutants measured for an incinerator are different from those for a landfill with or without gas collection. However, based on the available information it appears that as far as airborne pollution is concerned, landfill sites without gas collection pose a potentially higher generic risk to human health than MSW incinerators performing to Environmental Agency (UK) standards. This analysis cannot be used to replace specific evaluations for a particular incinerator or a landfill site because local conditions can have a very large impact on the magnitude of risks involved.     

Alternative treatments for the municipal solid waste and domestic sewage in Campinas,Brazil

The treatments of municipal solid waste (MSW) and the domestic sewage (DS) are critical issues of the current political and environment discussions. These concerns are due to the lack of dumping areas, the continuous increase of the population, and public health issues. The adequate treatment and management of MSW and DS can produce many benefits such as financial funds, heat and energy production, reduction of emissions and recuperation of water for reuse. Currently in Campinas MSW and DS are deposited in landfills or discharged into rivers and other sites. In the present study two scenarios are evaluated for the treatment of MSW and DS in Campinas: recycling with biological treatment and recycling with thermal treatment. The most suitable treatments for Campinas, based on the data from the present analysis and taking into consideration the local conditions, maximization of energy potential and environmental benefits, are incineration for the MSW and biological treatment for DS, both with energy recuperation. The main gains of this option are substantial environmental benefits, generated energy which can reach 18% of the total electrical energy consumed in Campinas while about 53% recuperation of the total amount of water treated for Campinas in 2010.     

Multiple regression models for the lower heating value of municipal solid waste in Taiwan

A multiple regression analysis was used to develop two predictive models of lower heating value (LHV) for municipal solid waste (MSW), using 180 samples gathered from cities and counties in Taiwan during 2001-2002. These models are referred to as the original proposed model (OPM) and the simplified model (SM). The coefficients of multiple determinations for the OPM and SM were 0.983 and 0.975, respectively. To verify the feasibility of the models, a demonstration program based on sampling of MSW in Kaohsiung City was conducted. As a result, the OPM showed superior precision in terms of relative percentage deviation (RPD) and mean absolute percentage error (MAPE), when compared to the conventional models based on the proximate analysis, physical composition and ultimate analysis. The SM was derived by neglecting the three minor physical components used in the OPM. The resulting SM was less precise when compared to the OPM, but it was still acceptable, with a precision level better than the conventional models. It was concluded that the predictability of empirical models could be improved significantly through selection of the appropriate physical components and multiple regression analysis.     

Municipal solid waste production and composition in Finland—Changes in the period 1960–2002 and prospects until 2020

Waste reduction was recognised as the main goal of waste management policy in the EU in the 1990s. Although knowledge of past waste generation is essential for effective waste reduction policy there are no comprehensive statistics on the past development of municipal solid waste (MSW) production. MSW management is currently under turmoil in many EU countries as the requirements of the EC landfill directive (1999/31/EC) are set into force. In this study, the production and composition of MSW in Finland between 1960 and 2002 is presented using historical data. The impact of population, affluence and technology on MSW production are analysed using the IPAT equation and three scenarios are constructed until year 2020. The results are compared with national future targets on MSW production. Production of MSW increased in Finland until 1990, declined to year 1997, increased to 2000 and then declined again. The share of organic and plastic waste increased over the study period while the share of paper and cardboard declined. The results suggest that so far national targets on MSW reduction have been set fairly low. Moreover, our scenarios depict a wide range of future MSW production, even though the time horizon is not longer than 15 years into the future. In order to narrow this range, continuous improvement of the statistics of MSW is essential.     

Assessing the demand of solid waste disposal in urban region by urban dynamics modelling in a GIS environment

The twentieth century saw a dramatic increase in the production of urban solid waste, reflecting unprecedented global levels of economic activity. Despite some efforts to reduce and recover the waste, disposal in landfills is still the most usual destination. However, landfill has become more difficult to implement because of its increasing cost, community opposition to landfill siting, and more restrictive environmental regulations regarding the siting and operation of landfills. Moreover, disposal in landfill is the waste destination method with the largest demand for land, while land is a resource whose availability has been decreasing in urban systems. Shortage of land for landfills is a problem frequently cited in the literature as a physical constraint. Nonetheless, the shortage of land for waste disposal has not been fully studied and, in particular, quantified. This paper presents a method to quantify the relationship between the demand and supply of suitable land for waste disposal over time using a geographic information system and modelling techniques. Based on projections of population growth, urban sprawl and waste generation the method can allow policy and decision-makers to measure the dimension of the problem of shortage of land into the future. The procedure can provide information to guide the design and schedule of programs to reduce and recover waste, and can potentially lead to a better use of the land resource. Porto Alegre City, Brazil was used as the case study to illustrate and analyse the approach. By testing different waste management scenarios, the results indicated that the demand for land for waste disposal overcomes the supply of suitable land for this use in the study area before the year 2050.     

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands

Future limitations on the availability of selected resources stress the need for increased material efficiency. In addition, in a climate-constrained world the impact of resource use on greenhouse gas emissions should be minimized. Waste management is key to achieve sustainable resource management. Ways to use resources more efficiently include prevention of waste, reuse of products and materials, and recycling of materials, while incineration and anaerobic digestion may recover part of the embodied energy of materials. This study used iWaste, a simulation model, to investigate the extent to which savings in energy consumption and CO₂ emissions can be achieved in the Netherlands through recycling of waste streams versus waste incineration, and to assess the extent to which this potential is reflected in the LAP2 (currently initiated policy). Three waste streams (i.e. household waste, bulky household waste, and construction and demolition waste) and three scenarios compare current policy to scenarios that focus on high-quality recycling (Recycling+) or incineration with increased efficiency (Incineration+). The results show that aiming for more and high-quality recycling can result in emission reductions of 2.3 MtCO₂ annually in the Netherlands compared to the reference situation in 2008. The main contributors to this reduction potential are found in optimizing the recycling of plastics (PET, PE and PP), textiles, paper, and organic waste. A scenario assuming a higher energy conversion efficiency of the incinerator treating the residual waste stream, achieves an emission reduction equivalent to only one third (0.7 MtCO₂/year) of the reduction achieved in the Recycling+ scenario. Furthermore, the results of the study show that currently initiated policy only partially realizes the full potential identified. A focus on highest quality use of recovered materials is essential to realize the full potential energy and CO₂ emission reduction identified for the Netherlands. Detailed economic and technical analyses of high quality recycling are recommended to further evaluate viable integrated waste management policies.     

An economic modelling approach to the design and delivery of sustainable waste minimisation clubs: Prospects in the new policy framework

Since the early 1990s, waste minimisation clubs have been important sources of information for industry in the UK on clean technology and sustainable waste management practice. Despite this contribution, concern has grown about the declining number of clubs, their performance and the likelihood that they will continue to play a key role in national policy.This paper examines the evidence available and provides estimates of how the numbers varied in England since the first clubs were formed. The results presented indicate that, after initial expansion, numbers went into decline. The paper then explores, using economic theory, why this pattern should have developed and suggests it to be a function of how clubs were designed and managed. The results of the analysis are used to propose alterations in how future clubs could be designed so that they continue to contribute effectively to the development of sustainable waste management in UK industry. These lessons are of value to policy in both the UK and other countries considering the development of this important tool of waste strategy. The paper concludes with a number of suggestions for future research.     

Response of macroinvertebrate communities to abattoir wastes and other anthropogenic activities in a municipal stream in the Niger Delta, Nigeria

Impacts of co-occurring stressors (organic wastes and various human activities) on macroinvertebrate assemblages and environmental variables were investigated in a municipal stream, River Orogodo in southern Nigeria between the months of June 2004 and July 2005. Four sampling sites, each 25 m long were selected along 15 km stretch of the stream. There was a marked difference in the taxonomic composition of macroinvertebrates in the reference sites (I and IV) and those of the perturbed sites (II and III). A combined total of 78 benthic macroinvertebrate taxa were collected from the four sites of the river. The abundance and community structure patterns showed strong evidence of impact arising from the abattoir waste discharge such that the comparison of abundance values demonstrated high significance between the reference sites and the perturbed sites. Pearson correlation coefficient analysis indicated temporal trends in macroinvertebrate density and community composition. This was related to changes in environmental characteristics of the river especially BOD₅ and amount of nutrients. These factors produced spatial and temporal heterogeneity and exerted major influence on the benthic communities. The preponderance of Oligochaetes and diptera and deterioration in water quality at sites II and III are attributed to the intensity of human activities at these sites. Shannon-wiener diversity and evenness were significantly higher (P < 0.05) at the reference sites I and IV. Results illustrate the need for careful consideration of the water quality and indicator organisms in restoration and remediation programmes.     

An economic analysis of different types of formal and informal entrepreneurs, recovering urban solid waste in Bangalore (India)

The recycling sector in India, which consists of a comprehensive trade and production sector, is rather complex. Nevertheless, it creates important benefits for both the economy and the environment. In order to comprehend the system, a case study has been performed on the recycling sector (paper, plastic, glass and non-ferrous metal) in Bangalore (India), focussing on the market structure, the scale of operation, employment effects, constraints, and recent developments. It was found that this highly competitive and labour-intensive industry is largely dependent on cheap labour and the supply of solid waste from the local trade system. Its mostly informal nature results from the ‘unregisteredness’ of the materials. Consequently, government involvement is avoided as much as possible. With present growth rates, prospects of recycling in Bangalore are advancing. Yet, problems such as lack of supply and loss of quality emerge. Therefore, quality control and market conditions should be improved.     

Using LCA to evaluate impacts and resources conservation potential of composting: A case study of the Asti District in Italy

Separate collection of municipal solid waste has overcome the 50% threshold in the Asti District in northern Italy, nearly one-third being composed of household and green organic waste. In order to address present and future solutions, it becomes therefore fundamental to assess the environmental performances of the current management of organic waste from separate collection. A from-gate-to-cradle life cycle assessment (LCA) model has been developed by expanding system boundaries, in order to carry out the assessment in the context of the whole waste management streamline. The environmental performances of an existing aerobic plant were made available, based on field measured data, by paying attention to the role and contribution of waste management subsystems. The need for actual and reliable data on materials and energy input, as well as gross and net gains from materials recovery, including benefits arising from use of compost in farming activities, was probably the major drawback that had to be faced. The study integrated the findings of different investigations from the literature with field measured data in order to obtain a more comprehensive framework representative of the area under study. The results may help public administrators to better understand the suitability of using LCA tools when dealing with solid waste management strategies.     

An intergrated waste survey and environmental effects of COGIDO, a bleached pulp and paper mill in Vietnam, on the receiving waterbody

An integrated investigation on wastewater characterization and the environmental effects from the COGIDO pulp and paper mill in Bien Hoa Industrial Estate, Vietnam, a chlorine bleached soda integrated pulp and paper mill operating without a chemical recovery system, on the receiving water body was conducted during the rainy and dry seasons in 1993 and 1995. The pollution load from the mill was very high in terms of BOD, COD and SS (COD_m: 58.7 t/d; BOD: 33.3 t/d and SS: 25.1 t/d). The effluent toxicity was determined using four toxicity tests: the green micro-alga, Selenastrum capricornutum, Microtox (marine bacteria: Photobacterium phosphoreum), the duckweed, Lemna aequinoctialis, and fish (silver barb: Puntius gonionotus, and Tilapia: Tilapia nilotica). Selenastrum capricornutum was the most sensitive among the tested organisms. The mill toxicity emission rate (TER) was as high as 338 610 (Selenastrum test). The bleaching-pulp and semi-chemical pulp plants which contributed the largest pollution load to the total COGIDO effluent, therefore, were targeted for abatement measures. Physico-chemical parameters as well as qualitative and quantitative aquatic organism composition for the river water were established. The BOD₅ and COD values exceeded the potable surface water standard by a factor of 2 to 4. The species diversity and abundance of the phytoplankton, zooplankton and zoobenthos were found to be lower (20–40%) than that of unpolluted rivers in Vietnam, whereas pollution-indicator species increased up to four times during the dry season 1995.     

Social and environmental injustices in solid waste management in sub-Saharan Africa: a study of Kinshasa,the Democratic Republic of Congo

This paper investigates social and environmental injustices in solid waste management in Kinshasa, the capital of the Democratic Republic of Congo. The urban poor in most parts of Kinshasa bear a huge encumbrance of the solid waste burden and face multiple challenges associated with poor management of solid waste. This situation has resulted in poor and unhealthy living conditions for the majority of the urban residents. The problem of solid waste management in Kinshasa has further been compounded by rapid urbanisation which has occurred in the face of poor urban governance, civil conflict and weak institutional set-up. The combination of these challenges has resulted in increased overcrowding, poor sanitary conditions, lack of water and an unprecedented accumulation of solid waste which have triggered a myriad of urban problems. The worst affected are the poor urban who reside in locations that receive little or no socio-economic services from the Kinshasa Municipal authority. Using secondary data collected through a desk study, this paper argues that the poor solid waste situation in Kinshasa is not only a health risk, but also presents issues of both social and environmental injustices. These issues are analysed within the context of evolving arguments that focus on the need to develop a pro-poor approach in solid waste management that may present an opportunity for achieving both social and environmental justice for the urban poor in Kinshasa.