Reversible "off-on" fluorescent chemosensor for Hg2+ based on rhodamine derivative

A novel and simple fluorescent chemosensor based on rhodamine was designed and synthesized to detect Hg(2+) with high selectivity. The structure of chemosensor 1 was characterized by IR, (1)H NMR, and HRMS spectroscopies. Chemosensor 1 exhibited distinct fluorescent and colorimetric changes toward Hg(2+) in an ethanol/water (80/20, v/v) solution, which resulted in the formation of 1/Hg(2+) complex with the Hg(2+)-induced ring opening of the spirolactam ring in rhodamine. The reversibility of chemosensor 1 was verified through its spectral response toward Hg(2+) ions and TBAI (tetrabutylammonium iodide) titration experiments.     

Rhodamine-derived Schiff base for the selective determination of mercuric ions in water media

A new rhodamine-derived Schiff base (RS) was synthesized and its sensing property to metal ions was investigated by UV/vis and fluorescence spectroscopies. Addition of Hg2+ ions to the aqueous solution of RS gave a visual color change as well as significantly fluorescent enhancement, while other ions including Pb2+, Cd2+, Cr3+, Zn2+, Cu2+, Fe2+, Co3+, Ni2+, Ca2+, Mg2+, K+ and Na+ ions did not induce any distinct color/spectral changes, which constituted a Hg2+-selective fluorescent OFF-ON chemosensor. The Hg2+-induced ring-opening of spirolactam of rhodamine in RS resulted in the dual chromo- and fluorogenic observation.     

Facile synthesis of rhodamine-based highly sensitive and fast responsive colorimetric and off-on fluorescent reversible chemosensors for Hg2+: preparation of a fluorescent thin film sensor

Fluorescence-active chemosensors (L1-L4), comprising a rhodamine scaffold and a pseudo azacrown cation-binding subunit, have been proposed and characterized as a fluorescent chemosensor for Hg(2+). An on-off type fluorescent enhancement was observed by the formation of the ring-opened amide form of the rhodamine moiety, which was induced by the interactions between Hg(2+) and the chemosensor. Upon the addition of Hg(2+), an overall emission change of 350-fold was observed, and the selectivity was calculated to be 300 times higher than Cu(2+) for receptors L2-L4. A polymeric thin film can be obtained by doping poly(methyl methacrylate) or PMMA with chemosensor L2. Such a thin film sensor can be used to detect Hg(2+) with high sensitivity and can be recovered using diluted NaOH.     

A new "turn-on" naphthalenedimide-based chemosensor for mercury ions with high selectivity: successful utilization of the mechanism of twisted intramolecular charge transfer, near-IR fluorescence, and cell images

For the first time, a new near-IR "turn-on" fluorescent chemosensor with high selectivity for Hg(2+) ions was designed according to the twisted intramolecular charge transfer (TICT) mechanism. The selective fluorescence enhancement effect can be optimized by modulating the solvent systems. And this naphthalenedimide-based sensor with long wavelength absorption and emission can be used to image intracellular Hg(2+) ions in living Hela cells.     

Naphthalimide appended rhodamine derivative: through bond energy transfer for sensing of Hg2+ ions

A naphthalimide appended rhodamine based fluorescent chemosensor '1' is synthesized which undergoes through bond energy transfer in the presence of Hg(2+) ions in mixed aqueous media.     

Rhodamine triazole-based fluorescent probe for the detection of Pt(2+)

A rhodamine triazole-based fluorescent chemosensor has been developed for the selective detection of platinum ions in aqueous solutions. The rhodamine 6G hydroxamate linked with a propargyl group is converted to the corresponding triazole by a "click" reaction. The dual binding unit composed of a hydroxamate and a triazole shows high selectivity and sensitivity toward Pt(2+) over a range of other metal ions in water. The fluorescent probe is applied to monitor cisplatin in aqueous solutions.     

Ratiometric detection of Hg2+ ions: an allosterically synchronized Hg2+/Li+ switch based on thiacalix[4]crown

A new heteroditopic chemosensor based on the 1,3-alternate conformation of thiacalix[4]crown shows a ratiometric fluorescence response towards Hg(2+) ions. Further, a negative allosteric behaviour between Hg(2+)/Li(+) ions is observed. Thus, metal ion exchange triggers a Hg(2+)/Li(+) switchable fluorescent chemosensor.     

A turn-on chemosensor for Hg2+ in aqueous media and its application in "MCT" imaging in living cells

A turn-on chemosensor L1, which exhibits high selectivity and sensitivity toward Hg(2+) over other common metal ions in aqueous media under a physiological pH window via a 1:1 binding mode, had been synthesized and characterized. L1 provides good fluorescent imaging of Hg(2+) in living cells. Particularly, we adopted the "micro computed tomography (MCT)" technology, successfully demonstrating the method of Hg(2+) sensing by L1 in cell lines, also the cell permeability of L1 and its imaging position in the cells.     

A turn-on and reversible fluorescence sensor for zinc ion

A simple Schiff base type fluorescent receptor was prepared and evaluated for its fluorescence response to heavy metal ions. Receptor exhibits an "off-on-type" mode with high selectivity in the presence of Zn(2+) ion. The addition of EDTA quenches the fluorescence of receptor -Zn(2+) complex, making receptor a reversible chemosensor. The selectivity of for Zn(2+) is the consequence of combined effects of CHEF, C[double bond, length as m-dash]N isomerization and inhibition of ESIPT.     

Thiacalix[4]arene based reconfigurable molecular switches: set-reset memorized sequential device

The fluorescent chemosensors 3, 5 and 7 based on thiacalix[4]arene bearing naphthyl groups have been designed and synthesized. The optical chemosensor 3 based on a thiacalix[4]arene of cone conformation behaves as "turn-on" optical chemosensor for Fe(3+) and F(-) ions. However, chemosensors 5 and 7 based on a thiacalix[4]arene of 1,3-alternate conformation demonstrate "turn-on" optical behaviour for Hg(2+), F(-) ions (with receptor 5 as turn-on for K(+) ions also) and "turn-off" behaviour for Fe(3+) ions. The simultaneous presence of Fe(3+) and Hg(2+) or K(+) or F(-) ions results in formulation of reversible "on-off" switches. Various molecular logic gates developed in response to molecular switching between these chemical inputs have been integrated into sequential logic circuits with memory function in a feedback loop which mimics "set-reset" molecular level information processing device.     

Highly sensitive multiresponsive chemosensor for selective detection of Hg2+ in natural water and different monitoring environments

A new chemosensor RF1 that combines a ferrocene unit and a rhodamine block via the linkage of a carbohydrazone binding unit was designed and prepared for the highly selective detection of Hg (2+) in natural water. This chemosensor displays great brightness and fluorescence enhancement following Hg (2+) coordination within the limit of detection for Hg (2+) at 1 parts per billion (ppb). The fluorescence intensities are nearly proportional to the amount of Hg (2+) at the ppb level. It is capable of distinguishing between the safe and the toxic levels of inorganic mercury in drinking water. Hg (2+)-binding also arouses the absorption of the rhodamine moiety in RF1 significantly with the chromogenic detection limit for Hg (2+) at 50 ppb. The conventional UV-vis spectroscopic method thus has the potential to provide the critical information about the mercury hazard assessment for industrial wastewater discharging. The obvious and characteristic color change of the titration solution from colorless to pink upon the addition of Hg (2+) demonstrates that RF1 can be used for "naked-eye" detection of Hg (2+) in water. The Hg (2+) complexation also causes a significant shift of the redox potential about the ferrocene/ferrocenium couple. The electrochemical responses provide the possibility to quantitative analysis of Hg (2+) at the parts per million (ppm) level. Preliminary investigations in natural water samples including seawater and freshwater indicate that RF1 offers a direct and immediate Hg (2+) detection in complex media, pointing out its potential utility in environment monitoring and assessment. The responses of RF1 are Hg (2+) specific, and the chemosensor exhibits high selectivity toward Hg (2+) over other Group 12 metals, alkali, alkaline earth metals, and most of the divalent first-row transition metals. The RF1-Hg (2+) complex is successfully isolated and the Hg (2+)-binding is reversible. The crystal structure and spectral properties of its congener RF2 that contains one ferrocene group and two rhodamine 6G moieties were also investigated for a comparison.     

Indole-based chemosensor for Hg2+ and Cu2+ ions: applications in molecular switches and live cell imaging

An indole based "ratiometric" and "turn-off" tris(N-methylindolyl)methane based chemosensor depicting a contrasting fluorescent behavior towards Hg(2+) and Cu(2+) ions, exhibited NOR and YES logic functions, and also imaged intracellular Hg(2+) in cervix cancer (HeLa) cells.     

A 'turn-on' FRET peptide sensor based on the mercury binding protein MerP

A new fluorescent peptidyl chemosensor based on the mercury binding MerP protein with fluorescence resonance energy transfer (FRET) capabilities has been synthesized via Fmoc solid-phase peptide synthesis. The metal chelating unit, which is flanked by the fluorophores tryptophan (donor) and dansyl (acceptor), contains amino acids from MerP's metal binding loop (sequence: dansyl-Gly-Gly-Thr-Leu-Ala-Val-Pro-Gly-Met-Thr-Cys-Ala-Ala-Cys-Pro-Ile-Thr-Val-Lys-Lys-Gly-Gly-Trp-CONH(2)). A FRET enhancement or 'turn-on' response was observed for Hg(2+) as well as for Zn(2+), Cd(2+) and Ag(+) in a pure aqueous solution at pH 7.0. The emission intensity of the acceptor was used to monitor the concentration of these metals ions with detection limits of 280, 6, 103 and 496 microg L(-1), respectively. No response was observed for the other transition, alkali and alkaline earth metals tested. The fluorescent enhancement observed is unique for Hg(2+) since this metal generally quenches fluorescence. The acceptor fluorescence increase resulting from metal binding-induced FRET suggests a sensor that is inherently more sensitive than one based on quenching by the binding event.     

Pyrene-linked triazole-modified homooxacalix[3]arene: a unique C3 symmetry ratiometric fluorescent chemosensor for Pb2+

A new type of fluorescent chemosensor based on homooxacalix[3]arene was synthesized. The fluorescent sensor was highly selective for Pb(2+) in comparison with other metal ions tested by enhancement of the monomer emission of pyrene. The C(3) symmetric structure of homooxacalix[3]arene has potential application in the development of a new ratiometric fluorescent chemosensor for heavy metal ions.     

Ratiometric sensing of Hg2+ based on the calix[4]arene of partial cone conformation possessing a dansyl moiety

A new fluorescent chemosensor based on the calix[4]arene of partial cone conformation possessing a dansyl moiety has been synthesized. The chemosensor demonstrates selective optical recognition of Hg(2+) and Cu(2+) in two contrasting modes. The receptor exhibited ratiometric sensing of Hg(2+) and "ON-OFF" type of fluorescence behavior in the presence of Cu(2+). The compound behaves as a fluorescent molecular switch upon chemical inputs of Hg(2+) and Cu(2+) ions.     

A "turn-on" fluorescent Hg2+ chemosensor based on Ferrier carbocyclization

A "turn-on" fluorescent chemosensor with excellent selectivity and satisfactory sensitivity on Hg(2+) detection in 100% water media has been established employing a carbohydrate based Ferrier carbocyclization reaction. The probe has also presented satisfactory results for the imaging of Hg(2+) ions in cells and organisms.     

Novel hemicyanine dye as colorimetric and fluorometric dual-modal chemosensor for mercury in water

A novel water soluble Hg(2+)-selective chemosensor 1 with hemicyanine as fluorescent reporting group and NO(2)Se(2) chelating unit as ion binding site was reported. Chemosensor 1 shows a specific Hg(2+) selectivity and discrimination between Hg(2+) and chemically similar ions in conjunction with a visible colorimetric change from red to colorless, potentially leading to both "naked-eye" and fluorometric detection of Hg(2+) cations.     

A Selective and Sensitive "Turn-on" Fluorescent Chemosensor for Recognition of Hg(2+) Ions in Water

Based upon highly selective and irreversible Hg(2+) -promoted deprotection of the dithioacetal reaction, a new water-soluble "turn-on" fluorescent chemosensor (1) was prepared and exhibited high selectivity and sensitivity towards the Hg(2+) ion over other heavy and transition-metal ions in pure water by transforming a weakly fluorescent precursor (colorless) to a highly fluorescent aldehyde (yellow-green; see figure) with a 155-fold increase in fluorescent intensity.     

A highly selective turn-on colorimetric, red fluorescent sensor for detecting mobile zinc in living cells

We describe ZRL1, a turn-on colorimetric and red fluorescent zinc ion sensor. The Zn(2+)-promoted ring opening of the rhodamine spirolactam ring in ZRL1 evokes a 220-fold fluorescence turn-on response. In aqueous media, ZRL1 turn-on luminescence is highly selective for Zn(2+) ions, with no significant response to other competitive cations, including Na(+), K(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Cd(2+), or Hg(2+). In addition to these characteristics, preliminary results indicate that ZRL1 can be delivered to living cells and can be used to monitor changes in intracellular Zn(2+) levels.     

Single sensor for two metal ions: colorimetric recognition of Cu2+ and fluorescent recognition of Hg2+

The first novel rhodamine B based sensor, rhodamine B hydrazide methyl 5-formyl-1H-pyrrole-2-carboxylate Schiff base (2) capable of detecting both Cu(2+) and Hg(2+) using two different detection modes has been designed and synthesized. The metal ion induced optical changes of 2 were investigated in MeOH:H(2)O (3:1) HEPES buffered solution at pH 7.4. Sensor 2 exhibits selective colorimetric recognition of Cu(2+) and fluorogenic recognition of Hg(2+) with UV-vis and fluorescence spectroscopy, respectively. Moreover, both of the Cu(2+) and Hg(2+) recognition processes are proven to be hardly influenced by other coexisting metal ions.