Li-ion diffusion kinetics in LiMn2O4 thin films prepared by pulsed laser deposition

LiMn₂O₄ thin films were deposited on Au substrates by pulsed laser deposition (PLD). The Li-ion chemical diffusion coefficients of the films, , were measured by cyclic voltammetry (CV), galvanostatic intermittent titration technique (GITT), potentiostatic intermittent titration technique (PITT), and electrochemical impedance spectroscopy (EIS). It was found that the values by CV and PITT were in the order of 10⁻¹³ cm² s⁻¹, and those by EIS and GITT were in the range of 10⁻¹³ to 10⁻¹¹ and 10⁻¹⁴ to 10⁻¹¹ cm² s⁻¹, respectively. These data were compared with the previously reported values.     

Li diffusion in LiNi0.5Mn0.5O2 thin film electrodes prepared by pulsed laser deposition

Kinetic and transport parameters of Li ion during its extraction/insertion into thin film LiNi_0.5Mn_0.5O₂ free of binder and conductive additive were provided in this work. LiNi_0.5Mn_0.5O₂ thin film electrodes were grown on Au substrates by pulsed laser deposition (PLD) and post-annealed. The annealed films exhibit a pure layered phase with a high degree of crystallinity. Surface morphology and thin film thickness were investigated by field emission scanning electron microscopy (FESEM). The charge/discharge behavior and rate capability of the thin film electrodes were investigated on Li/LiNi_0.5Mn_0.5O₂ cells at different current densities. The kinetics of Li diffusion in these thin film electrodes were investigated by cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT). CV was measured between 2.5 and 4.5 V at different scan rates from 0.1 to 2 mV/s. The apparent chemical diffusion coefficients of Li in the thin film electrode were calculated to be 3.13 × 10⁻¹³ cm²/s for Li intercalation and 7.44 × 10⁻¹⁴ cm²/s for Li deintercalation. The chemical diffusion coefficients of Li in the thin film electrode were determined to be in the range of 10⁻¹²-10⁻¹⁶ cm²/s at different cell potentials by GITT. It is found that the Li diffusivity is highly dependent on the cell potential.     

Enhanced cycling stability of LiMn2O4 cathode by amorphous FePO4 coating

The cycling performance of LiMn₂O₄ at room and elevated temperatures is improved by FePO₄ modification through chemical deposition method. The pristine and FePO₄-coated LiMn₂O₄ materials are characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and transmission electron microscopy. Their cycling performances are thoroughly investigated and compared. The 3 wt.% FePO₄-coated LiMn₂O₄ exhibits capacity losses of only 32% and 34% at room temperature and 55 °C, respectively, after 80 cycles, much better than those of the pristine material, 55% and 72%. The cyclic voltammograms at 55 °C reveal that the improvement in the cycling performance of FePO₄-coated LiMn₂O₄ electrodes can be attributed to the stabilization of spinel structures. The separation of FePO₄ between active materials and electrolyte and its interaction with SEI (solid electrolyte interphase) film are believed to account for the improved performances.     

Preparation and electrochemical properties of LiMn2O4 by the microwave-assisted rheological phase method

Pure-phase and well-crystallized spinel LiMn₂O₄ powders as cathode materials for lithium-ion batteries were successfully synthesized by a new simple microwave-assisted rheological phase method, which was a timesaving and efficient method. The physical properties of the as-synthesized samples compared with the pristine LiMn₂O₄ obtained from the rheological phase method were investigated by thermogravimetry analysis (TGA), X-ray diffraction (XRD) and scanning electronic microscope (SEM). The as-prepared powders were used as positive materials for lithium-ion battery, whose charge/discharge properties and cycle performance were examined in detail. The powders resulting from the microwave-assisted rheological phase method were pure, spinel structure LiMn₂O₄ particles of regular shapes with distribution uniformly, and exhibited promising electrochemical properties for battery. Furthermore, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were employed to characterize the reactions of Li-ion insertion into and extraction from LiMn₂O₄ electrode.     

Crystal structure studies of thermally aged LiCoO2 and LiMn2O4 cathodes

LiCoO₂ and LiMn₂O₄ cathodes were studied by X-ray diffractometry (XRD) and electron diffraction after ageing in the charged state at elevated temperature. Some cathodes were stopped at different times during ageing and XRD measurements were taken to monitor changes in the crystal structure over ageing time. The results indicate that Li-ions intercalate into the cathodes lattice during ageing thus decreasing the available discharge capacity. Analysis of electron diffraction patterns of LiCoO₂ and LiMn₂O₄ retrieved from the cathodes after ageing shows that irreversible crystallographic transformations have taken place in both electrodes. Dark field imaging illustrates that LiCoO₂ forms a layer of spinel phase on its surface. In LiMn₂O₄ a tetragonal distorted spinel is observed when the cathode has been in the 3 V regime for considerable length of time.     

On the fractal study of LiMn2O4 electrode surface

Fractal dimension of a LiMn₂O₄ electrode prepared by sol-gel method was determined using electrochemical techniques based on the phenomenon of “diffusion towards electrode surface”. A simple discussion was made on the methodology to understand what is really estimated as the fractal dimension. It was demonstrated that the value of fractal dimension determined based on electrochemical methods is strongly dependent on the electrochemical system situation. This is generally true for all real electrodes involving insertion/extraction processes. This comes from the fact that surface morphology of the electrode is subject of significant changes during the electrochemical experiment.     

Effect of annealing on SiC thin films prepared by pulsed laser deposition

Crystalline cubic SiC thin films were successfully fabricated on Si(100) substrates by using laser deposition combined with a vacuum annealing process. The effect of annealing conditions on the structure of the thin films was investigated by X-ray diffraction and Fourier transform infrared spectroscopy. It was demonstrated that amorphous SiC films deposited at 800°C could be transformed into crystalline phase after being annealed in a vacuum and that the annealing temperature played an important role in this transformation, with an optimum annealing temperature of 980°C. Results of X-ray photoelectron spectroscopy revealed the approximate stoichiometry of the SiC films. The characteristic microstructure displayed in a scanning electron microscope image of the films was indicative of epitaxial growth along the (100) plane.     

Synthesis of spinel LiMn2O4 with manganese carbonate prepared by micro-emulsion method

Micro-spherical particle of MnCO₃ has been successfully synthesized in CTAB-C₈H₁₈-C₄H₉OH-H₂O micro-emulsion system. Mn₂O₃ decomposed from the MnCO₃ is mixed with Li₂CO₃ and sintered at 800 °C for 12 h, and the pure spinel LiMn₂O₄ in sub-micrometer size is obtained. The LiMn₂O₄ has initial discharge specific capacity of 124 mAh g⁻¹ at discharge current of 120 mA g⁻¹ between 3 and 4.2 V, and retains 118 mAh g⁻¹ after 110 cycles. High-rate capability test shows that even at a current density of 16 C, capacity about 103 mAh g⁻¹ is delivered, whose power is 57 times of that at 0.2 C. The capacity loss rate at 55 °C is 0.27% per cycle.     

Synthesis of spherical spinel LiMn2O4 with commercial manganese carbonate

Spherical spinel LiMn₂O₄ particles were successfully synthesized from a mixture of manganese compounds containing commercial manganese carbonate by sintering of the spray-dried precursor. Different preparation routes were investigated to improve the tap density and to enhance the electrochemical performance of LiMn₂O₄. The structure and morphology of the LiMn₂O₄ particles were confirmed by X-ray diffraction (XRD) and scanning electron microscopy. The results showed that hollow spherical LiMn₂O₄ particles could be obtained when only commercial MnCO₃ was used as the manganese source. These particles had a low tap density (ca.0.8 g/cm³). Perfect micron-sized spherical LiMn₂O₄ particles with good electrochemical performance were obtained by spray-drying a slurry composed of MnCO₃, Mn(CH₃CHOO)₂ and LiOH, followed by a dynamic sintering process and a stationary sintering process. The as-prepared spherical LiMn₂O₄ particles comprised hundreds of nanosize crystal grains and had a high tap density(ca. 1.4 g/cm³). The galvanostatic charge-discharge measurements indicated that the spherical LiMn₂O₄ particles had an initial capacity of 121 mAh/g between 3.0 and 4.2 V at 0.2 C rate and still delivered a reversible capacity of 112 mAh/g at 2 C rate. The retention of capacity after 50 cycles was still 96% of its initial capacity at 0.2 C. All the results showed that the as-prepared spherical LiMn₂O₄ particles had an excellent electrochemical performances. The methods we used for preparing spherical LiMn₂O₄ are energy-saving and suitable for industrial application.     

Synthesis of spherical LiMn2O4 cathode material by dynamic sintering of spray-dried precursors

Spherical LiMn₂O₄ particles were successfully synthesized by dynamically sintering spherical precursor powders, which were prepared by a slurry spray-drying method. The effect of the sintering process on the morphology of LiMn₂O₄ was studied. It was found that a one-step static sintering process combined with a spray-drying method could not be adopted to prepare spherical products. A two-step sintering procedure consisting of completely decomposing sprayed precursors at low temperature and further sintering at elevated temperature facilitated spherical particle formation. The dynamic sintering program enhanced the effect of the two-step sintering process in the formation of spherical LiMn₂O₄ powders. The LiMn₂O₄ powders prepared by the dynamic sintering process, after initially decomposing the spherical spray-dried precursor at 180 °C for 5 h and then sintering it at 700 °C for 8 h, were spherical and pure spinel. The as-prepared spherical material had a high tap density (ca. 1.6 g/cm³). Its specific capacity was about 117 mAh/g between 3.0 and 4.2 V at a rate of 0.2 C. The retention of capacity for this product was about 95% over 50 cycles. The rate capability test indicated that the retention of the discharge capacity at 4C rate was still 95.5% of its 0.2 rate capacity. All the results showed that the spherical LiMn₂O₄ product made by the dynamic sintering process had a good performance for lithium ion batteries. This novel method combining a dynamic sintering system and a spray-drying process is an effective synthesis method for the spherical cathode material in lithium ion batteries.     

Properties of LiMn2O4 cathode in electrolyte based on N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide

LiMn₂O₄ was examined as a cathode material for lithium-ion batteries, working together with a room temperature ionic liquid electrolyte, obtained by dissolution of solid lithium bis(trifluoromethanesulfonyl)imide (LiNTf₂) in liquid N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (MePrPipNTf₂), with the formation of a liquid LiNTf₂-MePrPipNTf₂ system. The Li/LiMn₂O₄ cell was tested by galvanostatic charging/discharging and by impedance spectroscopy. The LiMn₂O₄ cathode showed good cyclability and Coulombic efficiency in the presence of 10 wt.% of vinylene carbonate (VC) as an additive to the ionic liquid. The flash point of the LiNTf₂-MePrPipNTf₂-VC(10%) electrolyte was estimated to be above 300 °C.     

Enhanced electrochemical stability of Al-doped LiMn2O4 synthesized by a polymer-pyrolysis method

LiAl_xMn_2−xO₄ samples (x = 0, 0.02, 0.05, 0.08) were synthesized by a polymer-pyrolysis method. The structure and morphology of the LiAl_xMn_2−xO₄ samples calcined at 800 °C for 6 h were investigated by powder X-ray diffraction and scanning electron microscopy. The results show that all samples have high crystallinity, regular octahedral morphology and uniform particle size of 100-300 nm. The electrochemical performances were tested by galvanostatic charge-discharge and cyclic voltammetry. The results demonstrate that the Al-doped LiMn₂O₄ can be very well cycled at an elevated temperature of 55 °C without severe capacity degradation. In particular, the LiAl_0.08Mn_1.92O₄ sample demonstrates excellent capacity retention of 99.3% after 50 cycles at 55 °C, confirming the greatly enhanced electrochemical stability of LiMn₂O₄ by a small quantity of Al-doping.     

A comparative electrochemical study of LiMn2O4 spinel thin-film and porous laminate

Novel Electrostatic Spray Deposition (ESD) technique was used to fabricate LiMn₂O₄ spinel thin-films. Cyclic voltammograms of both the ESD and porous laminate films show the double peaks in the 4.0 V range characteristic of the LiMn₂O₄ spinel materials. The porous laminates exhibit two semicircles in the impedance spectra while the ESD films show only one single semicircle. The diffusion time constant in the laminate films was typically one order of magnitude larger than that in the ESD thin-films. The apparent lithium-ion chemical diffusion coefficient in LiMn₂O₄ was found to be of the order of 10⁻⁹ cm²/s for both the porous laminate film and the ESD films despite the difference in the diffusion time constants.     

Fractal study of LiMn2O4 film electrode surface for lithium batteries application

Fractal structure of a LiMn₂O₄ film electrode has been investigated and its fractal dimensions was determined using different electrochemical techniques, viz. cyclic voltammetry and chronoamperometry. The results obtained from both these methods are in good agreement indicating the reliability of the estimated D_f. The fractal study of the LiMn₂O₄ film electrode suggests a complex surface with high fractal dimension. In addition, length scales of the electrode surface were also calculated.     

Electrochemical investigation of LiMn2O4 cathodes in gel electrolyte at various temperatures

A composite lithium battery electrode of LiMn₂O₄ in combination with a gel electrolyte (1 M LiBF₄/24 wt% PMMA/1:1 EC:DEC) has been investigated by galvanostatic cycling experiments and electrochemical impedance spectroscopy (EIS) at various temperatures, i.e. −3<T<56 °C. For analysis of EIS data, a mathematical model taking into account local kinetics and potential distribution in the liquid phase within the porous electrode structure was used. Reasonable values of the double-layer capacitance, the exchange-current density and the solid phase diffusion were found as a function of temperature. The apparent activation energy of the charge-transfer (∼65 kJ mol⁻¹), the solid phase transfer (∼45 kJ mol⁻¹) and of the ionic bulk and effective conductance in the gel phase (∼34 kJ mol⁻¹), respectively, were also determined. The kinetic results related to ambient temperature were compared to those obtained in the corresponding liquid electrolyte. The incorporated PMMA was found to reduce the ionic conductivity of the free electrolyte, and it was concluded that the presence of 24 wt% PMMA does not have a significant influence on the kinetic properties of LiMn₂O₄.     

Electrochemical preparation and characterization of V2O5/polyaniline composite film cathodes for Li battery

Vanadium pentoxide/polyaniline (V₂O₅/PANi) composite films were prepared by a two-step electrochemical method and evaluated for their application in lithium batteries. As a first step the PANi film was potentiodynamically grown in an acid solution containing aniline monomer, and secondly vanadium oxide was oxidatively deposited on the polyaniline film in a temperature controlled VOSO₄ solution. The increased current efficiency obtained with the larger anodic current in the high temperature solutions results in high contents of V₂O₅ in the composites, even if the oxidative dissolution of PANi also occurs. The large value of the diffusion coefficient estimated from the cyclic voltammograms for the composite film provides evidence for the synergistic effect of the conducting polymer and the inorganic composite. The cell exhibited excellent cycle stability with a high charge storage capacity. The large increase in the specific capacity for the composite film prepared in this work demonstrates that the conducting polymer in the composite acts as a binding and conducting element by contributing its electroactivity. The V₂O₅/PANi composite film cathodes show a large specific capacity (ca. 270 mAh/g) and improved cyclability with an extremely small amount of capacity fading (ca. 3.4%) during repeated charge/discharge cycles.     

Electrochemical performance of single crystalline spinel LiMn2O4 nanowires in an aqueous LiNO3 solution

Single crystalline cubic spinel LiMn₂O₄ nanowires were synthesized by hydrothermal method and the precursor calcinations. The phase structures and morphologies were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM). Galvanostatic charging/discharging cycles of as-prepared LiMn₂O₄ nanowires were performed in an aqueous LiNO₃ solution. The initial discharge capacity of LiMn₂O₄ nanowires was 110 mAh g⁻¹, and the discharge capacity was still above 100 mAh g⁻¹ after 56 cycles at 10C-rate, and then 72 mAh g⁻¹ was registered after 130 cycles. This is the first report of a successful use of single crystalline spinel LiMn₂O₄ nanowire as cathode material for the aqueous rechargeable lithium battery (ARLB).     

Co3O4 thin film prepared by a chemical bath deposition for electrochemical capacitors

Co₃O₄ thin film is synthesized on ITO by a chemical bath deposition. The prepared Co₃O₄ thin film is characterized by X-ray diffraction, and scanning electron microscopy. Electrochemical capacitive behavior of synthesized Co₃O₄ thin film is investigated by cyclic voltammetry, constant current charge/discharge and electrochemical impedance spectroscopy. Scanning electron microscopy images show that Co₃O₄ thin film is composed of spherical-like coarse particles, together with some pores among particles. Electrochemical studies reveal that capacitive characteristic of Co₃O₄ thin film mainly results from pseudocapacitance. Co₃O₄ thin film exhibits a maximum specific capacitance of 227 F g⁻¹ at the specific current of 0.2 A g⁻¹. The specific capacitance reduces to 152 F g⁻¹ when the specific current increases to 1.4 A g⁻¹. The specific capacitance retention ratio is 67% at the specific current range from 0.2 to 1.4 A g⁻¹.     

Synthesis of highly crystalline spinel LiMn2O4 by a soft chemical route and its electrochemical performance

Highly crystalline spinel LiMn₂O₄ was successfully synthesized by annealing lithiated MnO₂ at a relative low temperature of 600 °C, in which the lithiated MnO₂ was prepared by chemical lithiation of the electrolytic manganese dioxide (EMD) and LiI. The LiI/MnO₂ ratio and the annealing temperature were optimized to obtain the pure phase LiMn₂O₄. With the LiI/MnO₂ molar ratio of 0.75, and annealing temperature of 600 °C, the resulting compounds showed a high initial discharge capacity of 127 mAh g⁻¹ at a current rate of 40 mAh g⁻¹. Moreover, it exhibited excellent cycling and high rate capability, maintaining 90% of its initial capacity after 100 charge-discharge cycles, at a discharge rate of 5 C, it kept more than 85% of the reversible capacity compared with that of 0.1 C.     

Synthesis and electrochemical characterization of nano-CeO2-coated nanostructure LiMn2O4 cathode materials for rechargeable lithium batteries

LiMn₂O₄ spinel cathode materials were coated with 0.5, 1.0, and 1.5 wt.% CeO₂ by a polymeric process, followed by calcination at 850 °C for 6 h in air. The surface-coated LiMn₂O₄ cathode materials were physically characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron microscopy (XPS). XRD patterns of CeO₂-coated LiMn₂O₄ revealed that the coating did not affect the crystal structure or the Fd3m space group of the cathode materials compared to uncoated LiMn₂O₄. The surface morphology and particle agglomeration were investigated using SEM, TEM image showed a compact coating layer on the surface of the core materials that had average thickness of about 20 nm. The XPS data illustrated that the CeO₂ completely coated the surface of the LiMn₂O₄ core cathode materials. The galvanostatic charge and discharge of the uncoated and CeO₂-coated LiMn₂O₄ cathode materials were measured in the potential range of 3.0-4.5 V (0.5 C rate) at 30 °C and 60 °C. Among them, the 1.0 wt.% of CeO₂-coated spinel LiMn₂O₄ cathode satisfies the structural stability, high reversible capacity and excellent electrochemical performances of rechargeable lithium batteries.