Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

Comparative investigation on structure and luminescence properties of fluoride phosphors codoped with Er/Yb

This paper reports on comparative investigation of structure and luminescence properties of tetragonal LiYF₄ and BaYF₅, and hexagonal NaYF₄ phosphors codoped with Er³⁺/Yb³⁺ by a facile hydrothermal synthesis. The products were characterized by X-ray diffractometer, scanning electron microscope, and photoluminescence spectroscopy. Intense visible emissions centered at around 525, 550 and 650 nm, originated from the transitions of ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2, and ⁴F_9/2 → ⁴I_15/2 of Er³⁺, respectively, have been observed in all the samples upon excitation with a 980 nm laser diode, and the involved mechanisms have been explained. Based on the green up-conversion emission performance, the Yb³⁺ concentrations of Er³⁺/Yb³⁺-codoped LiYF₄, BaYF₅, and NaYF₄ phosphors have been optimized to be 10, 20, and 20 mol.%, respectively. The quadratic dependence of fluorescence on excitation laser power has confirmed that two-photon contribute to up-conversion of the green–red emissions.     

Rare‐Earth‐Based Nanoparticles with Simultaneously Enhanced Near‐Infrared (NIR)‐Visible (Vis) and NIR‐NIR Dual‐Conversion Luminescence for Multimodal Imaging

Multifunctional NaGdF₄:Yb³⁺,Er³⁺,Nd³⁺@NaGdF₄:Nd³⁺ core–shell nanoparticles (called Gd:Yb³⁺,Er³⁺,Nd³⁺@Gd:Nd³⁺ NPs) with simultaneously enhanced near‐infrared (NIR)‐visible (Vis) and NIR‐NIR dual‐conversion (up and down) luminescence (UCL/DCL) properties were successfully synthesized. The resulting core–shell NPs simultaneously emitted enhanced UCL at 522, 540, and 660 nm and DCL at 980 and 1060 nm under the excitation of a 793 nm laser. The enhanced UCL and DCL can be explained by complex energy‐transfer processes, Nd³⁺→Yb³⁺→Er³⁺ and Nd³⁺→Yb³⁺, respectively. The effects of Nd³⁺ concentration and shell thickness on the UCL/DCL properties were systematically investigated. The UCL and DCL properties of NPs were observed under the optimal conditions: a shell Nd³⁺ content of 20 % and a shell thickness of approximately 5 nm. Moreover, the Gd:Yb³⁺,Er³⁺,Nd³⁺@Gd:20 % Nd³⁺ NPs exhibited remarkable magnetic resonance imaging (MRI) properties similar to that of a clinical agent, Omniscan. Thus, the core–shell NPs with excellent UCL/DCL/magnetic resonance imaging (MRI) properties have great potential for both in vitro and in vivo multimodal bioimaging.     

An efficient upconversion luminescence energy transfer system for determination of trace amounts of nitrite based on NaYF4:Yb3+, Er3+ as donor

Based on NaYF₄:Yb³⁺, Er³⁺ upconversion nanocrystals as donor and 4-((4-(2-aminoethylamino)naphthalen-1-yl)diazenyl) benzenesulfonic acid dihydrochloride (ANDBS) as acceptor, an efficient luminescence energy transfer (LET) system was developed for selective and sensitive determination of trace amounts of nitrite. Based on Griess Reaction, ANDBS was generated by the quantitative reaction of nitrite, sulfanilamide and N-(1-naphtyl)-ethylenediamine dihydrochloride (N1NED). The degree of the overlaps between the emission spectrum of NaYF₄:Yb³⁺, Er³⁺ and the absorption spectrum of ANDBS were effective for luminescence energy transfer. Under the optimal condition, the upconversion luminescence quenching of NaYF₄:Yb³⁺, Er³⁺ was in proportion to the trace amounts of nitrite. The detection limit for nitrite achieved is 0.0046 μg mL^?1 and the system shows high sensitivity towards nitrite at 0.008000–0.2500 μg mL^?1 range.     

Synthesis and surface modification of ultrasmall monodisperse NaYF4:Yb3+/Tm3+ upconversion nanoparticles

The emerging upconversion nanoparticles (UCNP) have gained substantial consideration in the field of bioanalytical as well as diagnostic applications. Therefore, great progress has been made in the synthesis and surface modification of luminescent UCNPs over the last two decades. In this paper, we have reported monodispersed and high luminescent upconversion nanoparticles NaYF₄: 20%Yb³⁺, 2%Tm³⁺ have been synthesized using a solvothermal method, followed by a coating of the NaYF₄ shell with a thin layer of SiO₂ on the surface to afford the core-shell NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles (NP@SiO₂). The prepared nanoparticles were of strong upconversion fluorescent emission intensity, hexagonal phase, and with an average size of about 8 ± 1 nm, which have been characterized by luminescence spectroscopy, powder X-ray diffraction (P-XRD), Dynamic light scattering (DLS), and Transmission electron microscopy (TEM). The results indicate that the NP@SiO₂ can be used for the conjugation of fluorescent probes for various biomolecules and can find applications in cancer cell imaging and disease diagnosis.     

DNA Intercalating Near-Infrared Luminescent Lanthanide Complexes Containing Dipyrido[3,2-a:2′,3′-c]phenazine (dppz) Ligands: Synthesis,Crystal Structures,Stability, Luminescence Properties and CT-DNA Interaction

In order to create near-infrared (NIR) luminescent lanthanide complexes suitable for DNA-interaction, novel lanthanide dppz complexes with general formula [Ln(NO₃)₃(dppz)₂] (Ln = Nd³⁺, Er³⁺ and Yb³⁺; dppz = dipyrido[3,2-a:2′,3′-c]phenazine) were synthesized, characterized and their luminescence properties were investigated. In addition, analogous compounds with other lanthanide ions (Ln = Ce³⁺, Pr³⁺, Sm³⁺, Eu³⁺, Tb³⁺, Dy³⁺, Ho³⁺, Tm³⁺, Lu³⁺) were prepared. All complexes were characterized by IR spectroscopy and elemental analysis. Single-crystal X-ray diffraction analysis of the complexes (Ln = La³⁺, Ce³⁺, Pr³⁺, Nd³⁺, Eu³⁺, Er³⁺, Yb³⁺, Lu³⁺) showed that the lanthanide’s first coordination sphere can be described as a bicapped dodecahedron, made up of two bidentate dppz ligands and three bidentate-coordinating nitrate anions. Efficient energy transfer was observed from the dppz ligand to the lanthanide ion (Nd³⁺, Er³⁺ and Yb³⁺), while relatively high luminescence lifetimes were detected for these complexes. In their excitation spectra, the maximum of the strong broad band is located at around 385 nm and this wavelength was further used for excitation of the chosen complexes. In their emission spectra, the following characteristic NIR emission peaks were observed: for a) Nd³⁺: ⁴F_3/2 → ⁴I_9/2 (870.8 nm), ⁴F_3/2 → ⁴I_11/2 (1052.7 nm) and ⁴F_3/2 → ⁴I_13/2 (1334.5 nm); b) Er³⁺: ⁴I_13/2 → ⁴I_15/2 (1529.0 nm) c) Yb³⁺: ²F_5/2 → ²F_7/2 (977.6 nm). While its low triplet energy level is ideally suited for efficient sensitization of Nd³⁺ and Er³⁺, the dppz ligand is considered not favorable as a sensitizer for most of the visible emitting lanthanide ions, due to its low-lying triplet level, which is too low for the accepting levels of most visible emitting lanthanides. Furthermore, the DNA intercalation ability of the [Nd(NO₃)₃(dppz)₂] complex with calf thymus DNA (CT-DNA) was confirmed using fluorescence spectroscopy.     

Preparation and spectroscopic properties of nanostructured glass-ceramics containing Yb3+, Er3+ ions and Co2+-doped spinel nanocrystals

Transparent glass-ceramics with Yb³⁺, Er³⁺ ions in glass matrix and tetrahedral Co²⁺-doped MgAl₂O₄ nanocrystals were synthesized. XRD patterns and FESEM micrograph of the glass-ceramics showed that MgAl₂O₄ nanocrystals (sizes of 10–20 nm) are uniformly dispersed in SiO₂ glass matrix. Absorption and emission spectra of the glass-ceramics indicated that Yb³⁺, Er³⁺ remain in SiO₂ glass matrix, while Co²⁺ occupied tetrahedral sites in MgAl₂O₄ nanocrystals, and can function as saturable absorber for Er³⁺. Transparent Co²⁺, Yb³⁺, Er³⁺ co-doped glass-ceramics possesses the spectral requirements and should be a potential laser material used for self-Q-switched microchip laser operating at 1.5–1.6 μm.     

Synthesis of Upconverting Hydrogel Nanocomposites Using Thiol‐Ene Click Chemistry: Template for the Formation of Dendrimer‐Like Gold Nanoparticle Assemblies

The synthesis of upconverting hydrogel nanocomposites by base‐catalyzed thiol‐ene click reaction between 10‐undecenoic acid capped Yb³⁺/Er³⁺‐doped NaYF₄ nanoparticles and pentaerythritol tetrakis(3‐mercaptopropionate) (PETMP) as tetrathiol monomer is reported. This synthetic strategy for nanocomposite gels is quite different from works where usually the preformed gels are mixed with the nanoparticles. Developing nanocomposites by surface modification of capping ligands would allow tuning and controlling of the separation of the nanoparticles inside the gel network. The hydrogel nanocomposites prepared by thiol‐ene click reaction show strong enhancement in luminescence intensity compared to 10‐undecenoic acid‐capped Yb³⁺/Er³⁺‐doped NaYF₄ nanoparticles through the upconversion process (under 980 nm laser excitation). The hydrogel nanocomposites display strong swelling characteristics in water resulting in porous structures. Interestingly, the resulting nanocomposite gels act as templates for the synthesis of dendrimer‐like Au nanostructures when HAuCl₄ is reduced in the presence of the nanocomposite gels.     

Er3+-Tm3+-Yb3+ tri-doped CaMoO4 upconverting phosphors in optical devices applications

The structural and optical properties of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphors prepared by chemical route have been explored. The crystalline structures of the prepared phosphors have been investigated with the help of X-ray diffraction analysis. The presence of different vibrational modes and absorption bands arising due to the transitions from the ground state to different excited states of rare earth ions have been identified using the Raman and UV-VIS-NIR absorption spectra of the developed phosphor, respectively. The concentration quenching effect on the luminescence property of the prepared materials has been explained in detail. The upconversion luminescence property of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphor annealed at different temperatures under 980 nm and 808 nm excitations have been reported. The energy transfer Er³⁺ → Tm³⁺, Yb³⁺ → Er³⁺ and Tm³⁺ has been found to be responsible for efficient UC emission. The dipole-dipole interaction is observed to be responsible for the concentration quenching of the luminescence intensity. The effect of annealing temperature on the upconversion luminescence property has been explained in detail. The results suggest that the developed tri-doped phosphor may be suitable in making the efficient NIR to visible upconverter and lighting based optical devices.     

Controllable Multicolor Upconversion Luminescence by Tuning the NaF Dosage

Multicolor upconversion (UC) luminescence of NaYF₄:Yb³⁺/Er³⁺ nanoparticles (NPs) was successfully tuned by simply controlling the NaF dosage. Unlike UC nanocrystals previously reported in the literature with multicolor emission obtained by varying the rare‐earth dopants, the current work developed a new approach to tune the UC emission color by controlling the NaF concentration without changing the ratio and dosage of rare‐earth ions. TEM and powder XRD were used to characterize the shape, size, and composition of the UC luminescent nanocrystals. The luminescence images, emission spectra, and multicolor emission mechanism of the NPs have also been demonstrated. As a result of the excellent ability of this new method to manipulate color emission, this will open up new avenues in the areas of bioprobes, light‐emitting devices, color displays, lasers, and so forth. To demonstrate their biological applications, the water‐stable, biocompatible, and bioconjugatable NaYF₄:Yb³⁺/Er³⁺@poly(acrylic acid) NPs were synthesized by this developed strategy and applied in targeted‐cell UC luminescence imaging.     

Designing Upconversion Nanocrystals Capable of 745 nm Sensitization and 803 nm Emission for Deep‐Tissue Imaging

A crystal design strategy is described that generates hexagonal‐phased NaYF₄:Nd/Yb@NaYF₄:Yb/Tm luminescent nanocrystals with the ability to emit light at 803 nm when illuminated at 745 nm. This is accomplished by taking advantage of the large absorption cross‐section of Nd³⁺ between 720 and 760 nm plus efficient spatial energy transfer and migration through Nd³⁺→Yb³⁺→Yb³⁺→Tm³⁺. Mechanistic investigations suggest that a cascaded two‐photon energy transfer upconversion process underlies the emission mechanism. This protocol enables deep‐tissue imaging to be achieved while mitigating the attenuation effect associated with the visible emission and the overheating constraint imposed by conventional 980 nm excitation.     

基于NaYF4:Yb3+,Er3+上转换发光纳米晶的复合微球组装及其光动力活性研究

采用微乳液法,以NaYF₄:Yb³⁺,Er³⁺纳米晶为发光基元,肽菁锌(ZnPc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF₄-ZnPc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF₄可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化ZnPc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

Aptamer‐Based Luminescence Energy Transfer from Near‐Infrared‐to‐Near‐Infrared Upconverting Nanoparticles to Gold Nanorods and Its Application for the Detection of Thrombin

A new luminescence energy transfer (LET) system has been designed for the detection of thrombin in the near‐infrared (NIR) region by utilizing NIR‐to‐NIR upconversion lanthanide nanophosphors (UCNPs) as the donor and gold nanorods (Au NRs) as the acceptor. The use of upconverting NaYF₄:Yb³⁺,Tm³⁺ nanoparticles with sharp NIR emission peaks upon NIR excitation by an inexpensive infrared continuous wave laser diode provided large spectral overlap between the donor and the acceptor. Both the Au NRs and carboxyl‐terminated NaYF₄:Yb³⁺,Tm³⁺ UCNPs were first modified with different thrombin aptamers. When thrombin was added, a LET system was then formed because of the specific recognition between the thrombin aptamers and thrombin. The LET system was used to monitor thrombin concentrations in aqueous buffer and human blood samples. The limits of detection for thrombin are as low as 0.118 nM in buffer solution and 0.129 nM in human serum. The method was also successfully applied to thrombin detection in blood samples.     

Synthesis and characterization of nanoporous NaYF4:Yb3+, Tm3+@SiO2 nanocomposites

Novel upconversion nanocomposites with nanoporous structure were presented in this paper. Silica-coated cubic NaYF₄:Yb³⁺, Tm³⁺ nanoparticles were first prepared. After annealing, monodisperse cubic/hexagonal mixed phases NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles were obtained, and the NaYF₄:Yb³⁺, Tm³⁺ cores became nanoporous. To the best of our knowledge, the nanoporous structure in NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanocomposites was observed for the first time. They demonstrate increased upconversion emission compared with unannealed dense NaYF₄:Yb³⁺, Tm³⁺ nanoparticles due to the appearance of the hexagonal NaYF₄:Yb³⁺, Tm³⁺. The silica shell not only makes the nanocomposites possess bio-affinity but also protects the NaYF₄:Yb³⁺, Tm³⁺ cores from aggregating and growing up. Thus the upconversion, nanoporous and bio-affinity properties were combined into one single nanoparticle. The nanocomposites have been characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), small angle X-ray diffraction (SAXRD) and emission spectroscopy. These multifunctional nanocomposites are expected to find applications in biological fields, such as biolabels, drug storage and delivery.     

Infrared‐to‐Visible Light Conversion in Er3+–Yb3+:Lu3Ga5O12 Nanogarnets

Er³⁺–Yb³⁺ co‐doped Lu₃Ga₅O₁₂ nanogarnets were prepared and characterized; their structural and luminescence properties were determined as a function of the Yb³⁺ concentration. The morphology of the nanogarnets was studied by HRTEM. Under 488 nm excitation, the nanogarnets emit green, red, and near‐infrared light. The decay curves for the (⁴S_3/2, ²H_11/2) and ⁴F_9/2 levels of the Er³⁺ions exhibit a non‐exponential nature under resonant laser excitation and their effective lifetimes are found to decrease with an increase in the Yb³⁺ concentration from 1.0 to 10.0 mol %. The non‐exponential decay curves are well fitted to the Inokuti–Hirayama model for S=8, indicating that the mechanism of interaction for energy transfer between the optically active ions is of dipole–quadrupole type. Upon 976 nm laser excitation, an intense green upconverted emission is clearly observed by the naked eyes. A significant enhancement of the red‐to‐green intensity ratio of Er³⁺ ions was observed with an increase in Yb³⁺ concentration. The power dependence and the dynamics of the upconverted emission confirm the existence of two‐photon upconversion processes for the green and red emissions.     

Investigation on the upconversion luminescence of Sr3AlO4F:Yb3+, Er3+, Ho3+ phosphors

To develop new emission-tunable upconversion (UC) phosphors, the Sr₃AlO₄F:5%Yb³⁺, xEr³⁺, yHo³⁺ (0 ≤ x ≤ 1%, 0 ≤ y ≤ 1%) samples were prepared by conversional solid-state reaction method, and their luminescence properties upon 980 nm excitation were studied. Upon 980 nm excitation, Yb³⁺-Er³⁺ codoped Sr₃AlO₄F shows a predominant emission peak between 645 and 700 nm which is attributed to the ⁴F_9/2-⁴I_15/2 transition of Er³⁺, and the Er³⁺ green emissions have been almost quenched. In this case, the yellowish green emitting light is obtained. The possible reason was interpreted by the energy level diagram and the proposed UC mechanism. For Yb³⁺-Ho³⁺ codoped Sr₃AlO₄F, three emissions are observed obviously which are all derived from the Ho³⁺ ion. The corresponding chromaticity coordinates indicate a red emission has been gained. To realize the tunable emission, the typical Sr₃AlO₄F:5%Yb³⁺, 0.2%Er³⁺, 1%Ho³⁺ phosphor was developed, and its emission spectrum includes the emission peaks of both Er³⁺ and Ho³⁺. Correspondingly, the sample gives a yellow emission.     

Photoluminescence in Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>-doped silica-titania inverse opal structures

Er³⁺ photoluminescence (PL) and Yb³⁺ → Er³⁺ energy transfer (ET) phenomena in the near infrared (NIR) have been studied in three-dimensional (3-D) inverse opal (IO) structures synthesized by a colloidal/sol–gel route, starting with the deposition of polystyrene microsphere (235 nm and 460 nm diameter) direct opal templates by convective self-assembly, followed by infiltration of the interstices with Er³⁺/Yb³⁺-doped silica, titania and silica-titania sols and heat-removal of the polymeric template material. The crystalline quality of the IOs has been optimized through suitable substrate treatments, plus the control of temperature and humidity during deposition of the templates. The structural and optical properties of the 3-D opal and IO structures have been studied by field emission scanning electron microscopy and visible-NIR reflection spectroscopy, in order to assess the relationship between microstructure and the photonic properties obtained. Photonic bandgaps have been evidenced by the corresponding stop bands in the reflection spectra. The shape and the intensity of the Er^{3+ 4}I_13/2 → ⁴I_15/2 transition at ~1.5 μm were modified in most IOs relatively to similar matrix deposits without a photonic crystal structure, particularly in the case of pure silica and titania IOs, where the PL peak narrowed and intensified. It was not possible at this stage to detect Yb³⁺ → Er³⁺ ET phenomena in the IOs structures.     

Shape,Size, and Phase‐Controlled Rare‐Earth Fluoride Nanocrystals with Optical Up‐Conversion Properties

High‐quality rare‐earth fluorides, α‐NaMF₄ (M=Dy, Ho, Er, Tm, Y, Yb, and Lu) nanocrystals and β‐NaMF₄ (M=Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Y, Yb, and Lu) nanoarrays, have been synthesized by using oleic acid as a stabilizing agent through a facile hydrothermal method at 130–230 °C. The phase, shape, and size of the products are varied by careful control of synthetic conditions, including hydrothermal temperature and time, and the amounts of reactants and solvents. Tuning the hydrothermal temperature, time, and the amount of NaOH can cause the transformation from the cubic α‐NaMF₄ to hexagonal phase β‐NaMF₄. Upon adjustment of the amount of NaOH, NaF, M³⁺, and ethanol, the morphologies for the β‐NaMF₄ nanoarrays can range from tube, rod, wire, and zigzagged rod, to flower‐patterned disk. Simultaneously, the size of the rare‐earth fluoride crystals is variable from 5 nm to several micrometers. A combination of “diffusion‐controlled growth” and the “organic–inorganic interface effect” is proposed to understand the formation of the nanocrystals. An ideal “1D growth” of rare‐earth fluorides is preferred at high temperatures and high ethanol contents, from which the tube‐ and rodlike nanoarrays with high aspect ratio are obtained. In contrast, the disklike β‐NaMF₄ nanoarrays with low aspect ratios are produced by decreasing the ethanol content or prolonging the reaction time, an effect probably caused by “1D/2D ripening”. Multicolor up‐conversion fluorescence is also successfully realized in the Yb³⁺/Er³⁺ (green, red) and Yb³⁺/Tm³⁺ (blue) co‐doped α‐NaYF₄ nanocrystals and β‐NaYF₄ nanoarrays by excitation in the NIR region (980 nm).     

Direct Synthesis of Hexagonal NaGdF4 Nanocrystals from a Single‐Source Precursor: Upconverting NaGdF4:Yb3+,Tm3+ and Its Composites with TiO2 for Near‐IR‐Driven Photocatalysis

A novel single‐source precursor NaGd(TFA)₄(diglyme) (TFA=trifluoroacetate) was synthesized, characterized thoroughly, and used to obtain the hexagonal phase of NaGdF₄ nanoparticles as an efficient matrix for lanthanide‐doped upconverting nanocrystals (NCs) that convert near‐infrared radiation into shorter‐wavelength UV/visible light. These NCs were then used to prepare well‐characterized TiO₂@NaGdF₄:Yb³⁺,Tm³⁺ nanocomposites to extend the absorption range of the TiO₂ photocatalyst from the UV to the IR region. While the visible/near IR part of the photoluminescent spectra remains almost unaffected by the presence of TiO₂, the UV part is strongly quenched due to the absorption of TiO₂ above its gap at approximately 380 nm by energy transfer or FRET. Preliminary results on the photocatalytic activity of the above obtained nanocomposites are presented.     

Temperature-dependent six-photon upconversion fluorescence of Er

Yb³⁺/Er³⁺ codoped β-NaYF₄ microcrystals were synthesized through a facile EDTA-assisted hydrothermal method. Under 980 nm excitation, 244, 256, and 276 nm upconversion (UC) emissions were observed in NaYF₄:Yb³⁺/Er³⁺ microcrystals, which were assigned to the ²I_11/2 → ⁴I_15/2, ⁴D_7/2 → ⁴I_15/2, and ⁴G_9/2 → ⁴I_15/2 transitions of Er³⁺ ions, respectively. Successive energy transfers (ETs) from Yb³⁺ to Er³⁺ played crucial roles in populating the high-energy states of Er³⁺ ions. Power dependence analysis exhibited that 244 and 256 nm UC emissions came from six-photon processes. Temperature-dependent UC emissions of ⁴D_7/2 → ⁴I_15/2 and ²I_11/2 → ⁴I_15/2 transitions of Er³⁺ were discussed and the nonradiative relaxation (NR) process of ²I_11/2 → ⁴D_7/2 was confirmed.