Pressure study of monoclinic ReO2 up to 1.2 GPa using X‐ray absorption spectroscopy and X‐ray diffraction

The crystal and local atomic structure of monoclinic ReO₂ (α‐ReO₂) under hydrostatic pressure up to 1.2 GPa was investigated for the first time using both X‐ray absorption spectroscopy and high‐resolution synchrotron X‐ray powder diffraction and a home‐built B₄C anvil pressure cell developed for this purpose. Extended X‐ray absorption fine‐structure (EXAFS) data analysis at pressures from ambient up to 1.2 GPa indicates that there are two distinct Re—Re distances and a distorted ReO₆ octahedron in the α‐ReO₂ structure. X‐ray diffraction analysis at ambient pressure revealed an unambiguous solution for the crystal structure of the α‐phase, demonstrating a modulation of the Re—Re distances. The relatively small portion of the diffraction pattern accessed in the pressure‐dependent measurements does not allow for a detailed study of the crystal structure of α‐ReO₂ under pressure. Nonetheless, a shift and reduction in the (011) Bragg peak intensity between 0.4 and 1.2 GPa is observed, with correlation to a decrease in Re—Re distance modulation, as confirmed by EXAFS analysis in the same pressure range. This behavior reveals that α‐ReO₂ is a possible inner pressure gauge for future experiments up to 1.2 GPa.     

The hydrogen‐bond effect on the high pressure behavior of hydrazinium monochloride

The first high pressure study of solid hydrazinium monochloride has been performed by in situ Raman spectroscopy and synchrotron X‐ray diffraction (XRD) experiments in diamond anvil cell (DAC) up to 39.5 and 24.6 GPa, respectively. The structure of phase I at room temperature is confirmed to be space group C2/c by the Raman spectral analysis and Rietveld refinement of the XRD pattern. A structural transition from phase I to II is observed at 7.3 GPa. Pressure‐induced position variation of hydrogen atoms in NH₃⁺ unit during the phase transition is attributed to the formation of N―H…Cl hydrogen‐bonds, which play a vital role in the stability and subsequent structural changes of this high energetic material under pressure. This inference is proved from the abnormal pressure shifts and obvious Fermi resonance in NH stretching mode of N₂H₅⁺ ion in the Raman experiment. Finally, a further transition from phase II to III accompanied with a slight internal distortion in the N₂H₅⁺ ions occurs above 19.8 GPa, and phase III persists up to 39.5 GPa. Copyright © 2015 John Wiley & Sons, Ltd.     

Pressure‐induced structural transformations in In2‐xYx(MoO4)3 systems

In this work, we report results of high‐pressure Raman experiments (P < 8 GPa) on In_2‐xY_xMo₃O₁₂ for x = 0.0 and 0.5. A crystalline to crystalline structural phase transition and pressure‐induced amorphization (PIA) have been identified. The structural phase transition takes place at 1.5 and 1.0 GPa for In₂(MoO₄)₃ and In_1.5Y_0.5(MoO₄)₃, respectively, resulting in the change of structure from monoclinic P2₁/a to a more denser structure. The PIA started at 5 and 3.4 GPa for In₂Mo₃O₁₂ and In_1.5Y_0.5Mo₃O₁₂, respectively. The amorphization process takes place in two stages in the case of In_1.5Y_0.5Mo₃O₁₂ phase, while for In₂Mo₃O₁₂, it is not complete until the pressure is as high as 7 GPa. Our results also suggest that with increase of ionic size of the A³⁺ ions, the octahedral distortion increases and consequently larger local structural disorder is introduced in the A₂(MoO₄)₃ system, where A is a trivalent ion (In, Y³⁺, Sc³⁺, Fe³⁺, etc.). Copyright © 2015 John Wiley & Sons, Ltd.     

Pressure‐induced anomalous phase transformation in nano‐crystalline dysprosium sesquioxide

The phase transformation in nano‐crystalline dysprosium sesquioxide (Dy₂O₃) under high pressures is investigated using in situ Raman spectroscopy. The material at ambient was found to be cubic in structure using X‐ray diffraction (XRD) and Raman spectroscopy, while atomic force microscope (AFM) showed the nano‐crystalline nature of the material which was further confirmed using XRD. Under ambient conditions the Raman spectrum showed a predominant cubic phase peak at 374 cm⁻¹, identified as F_g mode. With increase in the applied pressure this band steadily shifts to higher wavenumbers. However, around a pressure of about 14.6 GPa, another broad band is seen to be developing around 530 cm⁻¹ which splits into two distinct peaks as the pressure is further increased. In addition, the cubic phase peak also starts losing intensity significantly, and above a pressure of 17.81 GPa this peak almost completely disappears and is replaced by two strong peaks at about 517 and 553 cm⁻¹. These peaks have been identified as occurring due to the development of hexagonal phase at the expense of cubic phase. Further increase in pressure up to about 25.5 GPa does not lead to any new peaks apart from slight shifting of the hexagonal phase peaks to higher wavenumbers. With release of the applied pressure, these peaks shift to lower wavenumbers and lose their doublet nature. However, the starting cubic phase is not recovered at total release but rather ends up in monoclinic structure. The factors contributing to this anomalous phase evolution would be discussed in detail. Copyright © 2010 John Wiley & Sons, Ltd.     

A combination of a Drickamer anvil apparatus and monochromatic X‐rays for stress and strain measurements under high pressure

A modified Drickamer anvil apparatus has been developed to combine with monochromatic synchrotron radiation for high‐pressure X‐ray diffraction and radiography in the GSECARS bending‐magnet station, 13‐BM‐D, at the Advanced Photon Source, Argonne, USA. Using this experimental set‐up, deformation experiments can be carried out at pressures in excess of 30 GPa at high temperatures. Differential stresses and total axial strains of polycrystalline platinum and Mg₂SiO₄ ringwoodite have been measured up to 32 GPa at room temperature using tungsten carbide anvils. The total axial strain of the platinum increases with pressure and reaches about 55% at the highest pressure. A test run using a composite sintered diamond anvil system was performed. The use of X‐ray‐tranparent anvils enables the entire Debye rings to be observed up to 10° 2θ. With high‐energy photons (65–70 keV), this allows a coverage in Q (= 2π sinθ/λ) to about 3 Å^?1, thus making it possible to evaluate hydrostatic pressure and differential stress in crystalline minerals using diffraction. This, coupled with the ability to determine axial strain, allows deformation studies to be performed to pressures above 30 GPa.     

A new fullerene network phase obtained from C70 at high‐pressure and high‐temperature

Fullerene networks are an exciting class of materials that may display exceptional physical properties. A new C₇₀‐fullerene network phase, synthesized at high‐pressure, 7 GPa, and high‐temperature, 600 °C, is presented. Its structure, determined by Rietveld analysis of the X‐ray diffraction data combined with density functional theory modeling, consists of puckered polymerized layers where each molecule is bonded to three neighbors through 2 + 2 cycloaddition bonds, a new polymeric configuration unseen in other fullerene networks. This new C₇₀‐fullerene network structure adds to the previous zigzag structures, demonstrating the potential of C₇₀ molecules as building blocks to synthesize new carbon phases. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

High‐pressure Brillouin study of the elastic properties of rare‐gas solid xenon at pressures up to 45 GPa

The pressure dependences of three adiabatic elastic constants, adiabatic bulk modulus, refractive index, and elastic anisotropy, as well as Cauchy deviation of fcc solid Xe have been determined up to 10 GPa at 296 K by high‐pressure Brillouin scattering spectroscopy. The characteristics of elastic properties at high pressure of rare‐gas solid Xe are investigated by comparison with the previous studies on Ne, Ar, and Kr. Above 10 GPa, the occurrence of splitting in the Brillouin signals and the direction dependence of acoustic velocities for solid Xe clearly show partial phase transformation to the hcp structure reported by the previous X‐ray diffraction and Raman scattering studies. The shear elastic modulus in the hcp phase of solid Xe has also been estimated at pressures up to 45 GPa by using the pressure dependence of the Raman wavenumber shift for the E_2g mode. Copyright © 2008 John Wiley & Sons, Ltd.     

X‐ray magnetic spectroscopy at high pressure: performance of SPring‐8 BL39XU

An X‐ray magnetic circular dichroism experiment under multiple extreme conditions, 2 ≤T≤ 300 K, H≤ 10 T and P≤ 50 GPa, has been achieved at SPring‐8 BL39XU. A combination of the high‐brilliant X‐ray beam and a helicity‐controlled technique enabled the dichroic signal to be recorded with high accuracy. The performance is shown by the outcome of pressure‐induced ferromagnetism in Mn₃GaC and the pressure‐suppressed Co moment in ErCo₂. Two technical developments, a tiny diamond anvil cell inserted into a superconducting magnet and in situ pressure calibration using 90° Bragg diffraction from a NaCl marker, are also presented. X‐ray magnetic spectroscopy under multiple extreme conditions is now opening a new approach to materials science.     

Momentum‐resolved resonant inelastic X‐ray scattering on a single crystal under high pressure

A single‐crystal momentum‐resolved resonant inelastic X‐ray scattering (RIXS) experiment under high pressure using an originally designed diamond anvil cell (DAC) is reported. The diamond‐in/diamond‐out geometry was adopted with both the incident and scattered beams passing through a 1 mm‐thick diamond. This enabled us to cover wide momentum space keeping the scattering angle condition near 90°. Elastic and inelastic scattering from the diamond was drastically reduced using a pinhole placed after the DAC. Measurement of the momentum‐resolved RIXS spectra of Sr_2.5Ca_11.5Cu₂₄O₄₁ at the Cu K‐edge was thus successful. Though the inelastic intensity becomes weaker by two orders than the ambient pressure, RIXS spectra both at the center and the edge of the Brillouin zone were obtained at 3 GPa and low‐energy electronic excitations of the cuprate were found to change with pressure.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of an energy‐domain 57Fe‐Mössbauer spectrometer using synchrotron radiation and its application to ultrahigh‐pressure studies with a diamond anvil cell

An energy‐domain ⁵⁷Fe‐Mössbauer spectrometer using synchrotron radiation (SR) with a diamond anvil cell (DAC) has been developed for ultrahigh‐pressure measurements. The main optical system consists of a single‐line pure nuclear Bragg reflection from an oscillating ⁵⁷FeBO₃ single crystal near the Néel temperature and an X‐ray focusing device. The developed spectrometer can filter the Doppler‐shifted single‐line ⁵⁷Fe‐Mössbauer radiation with a narrow bandwidth of neV order from a broadband SR source. The focused incident X‐rays make it easy to measure a small specimen in the DAC. The present paper introduces the design and performance of the SR ⁵⁷Fe‐Mössbauer spectrometer and its demonstrative applications including the newly discovered result of a pressure‐induced magnetic phase transition of polycrystalline ⁵⁷Fe₃BO₆ and an unknown high‐pressure phase of Gd⁵⁷Fe₂ alloy placed in a DAC under high pressures up to 302 GPa. The achievement of Mössbauer spectroscopy in the multimegabar range is of particular interest to researchers studying the nature of the Earth's core.     

Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

In situ synchrotron high‐energy X‐ray diffraction analysis on phase transformations in Ti–Al alloys processed by equal‐channel angular pressing

Mixtures of 47‐Al and 53‐Ti powders (atomic %) have been consolidated using back pressure equal‐channel angular pressing starting with both raw and ball‐milled powders. In situ synchrotron high‐energy X‐ray diffraction studies are presented with continuous Rietveld analysis obtained upon a heating ramp from 300 K to 1075 K performed after the consolidation process. Initial phase distributions contain all intermetallic compounds of this system except Al, with distribution maxima in the outer regions of the concentrations (α‐Ti, TiAl₃). Upon annealing, the phase evolution and lattice parameter changes owing to chemical segregation, which is in favour for the more equilibrated phases such as γ‐TiAl, α₂‐Ti₃Al and TiAl₂, were followed unprecedentedly in detail. An initial δ‐TiH₂ content with a phase transition at about 625 K upon heating created an intermediate β‐Ti phase which played an important role in the reaction chain and gradually transformed into the final products.     

Pressure‐induced phase transitions in L‐leucine crystal

Raman spectra of a crystal of L ‐leucine, an essential amino acid, were obtained for pressures between 0 and 6 GPa. The results show anomalies at three pressure values, one between 0 and 0.46 GPa, another between 0.8 and 1.46 GPa, and a third at P ∼ 3.6 GPa. The first two anomalies are characterized by the disappearance of lattice modes (which can indicate occurrence of phase transitions), the appearance of several internal modes, or the splitting of modes of high wavenumbers. The changes of internal modes are related to CH and CH₃ unit motions as well as hydrogen bonds, as can be inferred from the behavior of bands associated with CO₂⁻ moieties. The third anomaly is a discrete change of the slopes of the wavenumber versus pressure plots for most modes observed. Further, decompression to ambient pressure generates the original Raman spectrum, showing that the pressure‐induced anomalies undergone by L ‐leucine crystals are reversible. Copyright © 2008 John Wiley & Sons, Ltd.     

Formation of the high pressure graphite and BC8 phases in a cold compression experiment by Raman scattering

We use Raman scattering to study phase transition in the graphitic g‐BC₈ phase and graphite at high pressure up to 84 GPa. The E_2g Raman active mode of graphite (G peak) can be detected up to 84 GPa. We demonstrate that there is (1) a phase transition in g‐BC₈ and in graphite at 35 GPa and (2) that above 35 GPa, the g‐BC₈ and graphite transform under high pressure to possibly fully sp³‐bonded, disordered hp‐BC₈, and hp‐C phases. Below the phase transition, a polynomial fit to the G peak position versus pressure data yielded a quadratic relation; above the phase transition, it demonstrates linear behavior. The phase transition at high pressure in BC₈ system and graphite is reversible. Quenched hp‐BC₈ and hp‐C phases have the Raman spectrum typical to that of the graphitic phases. Copyright © 2013 John Wiley & Sons, Ltd.     

In situ Raman and photoluminescence study on pressure‐induced phase transition in C60 nanotubes

Single crystalline C₆₀ nanotubes having face‐centered‐cubic structure with diameters in the nanometer range were synthesized by a solution method. In situ Raman and photoluminescence spectroscopy under high pressure were employed to study the structural stabilities and transitions of the pristine C₆₀ nanotubes. A phase transition, probably because of the orientational ordering of C₆₀ molecules, from face‐centered‐cubic structure to simple cubic structure occurred at the pressure between 1.46 and 2.26 GPa. At above 20.41 GPa, the Raman spectrum became very diffuse and lost its fine structure in all wavenumber regions, and only two broad and asymmetry peaks initially centered at 1469 and 1570 cm^–1 were observed, indicating an occurrence of amorphization. This amorphous phase remained to be reversible until 31.1 GPa, and it became irreversible to the ambient pressure after the pressure cycle of 34.3 GPa was applied. Copyright © 2012 John Wiley & Sons, Ltd.     

Periodic density functional theory study of the high‐pressure behavior of crystalline 7,2′‐anhydro‐β‐d‐arabinosylorotidine

In this work, a detailed study of the structural, electronic, and absorption properties of crystalline 7,2′‐anhydro‐β‐d ‐arabinosylorotidine (Cyclo ara‐O) in the pressure range of 0–350 GPa is performed by density functional theory calculations. The detail analysis of the crystal with increasing pressure shows that complex transformations occur in Cyclo ara‐O under compression. In addition, the b‐direction is much stiffer than the a‐ and c‐axis at 0–330 GPa, suggesting that the Cyclo ara‐O crystal is anisotropic in the certain pressure region. In the pressure range of 110–290 GPa, repeated formations and disconnections of covalent bonds in O7–O6* and C3–C6* occur several times, resulting in a new six‐atom ring that forms at 220, 270, and 290 GPa, while a five‐atom ring and seven‐atom ring form between two adjacent molecules at 300 and 340 GPa, respectively. Then, the analysis of the band gap and DOS (PDOS) of Cyclo ara‐O indicates that its electronic character has changed at 300 GPa into an excellent insulator, but the electron transition is much easier at 350 GPa. Moreover, the relatively high optical activity with the pressure increases of Cyclo ara‐O is seen from the absorption spectra, and two obvious structural transformations are also observed at 180 and 230 GPa, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

An electrochemical cell with sapphire windows for operando synchrotron X‐ray powder diffraction and spectroscopy studies of high‐power and high‐voltage electrodes for metal‐ion batteries

A new multi‐purpose operando electrochemical cell was designed, constructed and tested on the Swiss–Norwegian Beamlines BM01 and BM31 at the European Synchrotron Radiation Facility. Single‐crystal sapphire X‐ray windows provide a good signal‐to‐noise ratio, excellent electrochemical contact because of the constant pressure between the electrodes, and perfect electrochemical stability at high potentials due to the inert and non‐conductive nature of sapphire. Examination of the phase transformations in the Li_1–xFe_0.5Mn_0.5PO₄ positive electrode (cathode) material at C/2 and 10C charge and discharge rates, and a study of the valence state of the Ni cations in the Li_1–xNi_0.5Mn_1.5O₄ cathode material for Li‐ion batteries, revealed the applicability of this novel cell design to diffraction and spectroscopic investigations of high‐power/high‐voltage electrodes for metal‐ion batteries.     

Multi‐use high/low‐temperature and pressure compatible portable chamber for in situ grazing‐incidence X‐ray scattering studies

The multipurpose portable ultra‐high‐vacuum‐compatible chamber described in detail in this article has been designed to carry out grazing‐incidence X‐ray scattering techniques on the BM25‐SpLine CRG beamline at the ESRF. The chamber has a cylindrical form, built on a 360° beryllium double‐ended conflate flange (CF) nipple. The main advantage of this chamber design is the wide sample temperature range, which may be varied between 60 and 1000 K. Other advantages of using a cylinder are that the wall thickness is reduced to a minimum value, keeping maximal solid angle accessibility and keeping wall absorption of the incoming X‐ray beam constant. The heat exchanger is a customized compact liquid‐nitrogen (LN2) continuous‐flow cryostat. LN2 is transferred from a storage Dewar through a vacuum‐isolated transfer line to the heat exchanger. The sample is mounted on a molybdenum support on the heat exchanger, which is equipped with a BORALECTRIC heater element. The chamber versatility extends to the operating pressure, ranging from ultra‐high vacuum (<10^?10 mbar) to high pressure (up to 3 × 10³ mbar). In addition, it is equipped with several CF ports to allocate auxiliary components such as capillary gas‐inlet, viewports, leak valves, ion gun, turbo pump, etc., responding to a large variety of experiment requirements. A movable slits set‐up has been foreseen to reduce the background and diffuse scattering produced at the beryllium wall. Diffraction data can be recorded either with a point detector or with a bi‐dimensional CCD detector, or both detectors simultaneously. The system has been designed to carry out a multitude of experiments in a large variety of environments. The system feasibility is demonstrated by showing temperature‐dependence grazing‐incidence X‐ray diffraction and conductivity measurements on a 20 nm‐thick La_0.7Ca_0.3MnO₃ thin film grown on a SrTiO₃(001) substrate.     

In situ observation of Ni–Mo–S phase formed on NiMo/Al2O3 catalyst sulfided at high pressure by means of Ni and Mo K‐edge EXAFS spectroscopy

To obtain direct evidence of the formation of the Ni–Mo–S phase on NiMo/Al₂O₃ catalysts under high‐pressure hydrodesulfurization conditions, a high‐pressure EXAFS chamber has been constructed and used to investigate the coordination structure of Ni and Mo species on the catalysts sulfided at high pressure. The high‐pressure chamber was designed to have a low dead volume and was equipped with polybenzimidazole X‐ray windows. Ni K‐edge k³χ(k) spectra with high signal‐to‐noise ratio were obtained using this high‐pressure chamber for the NiMo/Al₂O₃ catalyst sulfided at 613 K and 1.1 MPa over a wide k range (39.5–146 nm^?1). The formation of Ni–Mo and Mo–Ni coordination shells was successfully proved by Ni and Mo K‐edge EXAFS measurement using this chamber. Interatomic distances of these coordination shells were almost identical to those calculated from Ni K‐edge EXAFS of NiMo/C catalysts sulfided at atmospheric pressure. These results support the hypothesis that the Ni–Mo–S phase is formed on the Al₂O₃‐supported NiMo catalyst sulfided under high‐pressure hydrodesulfurization conditions.