HZSM-5沸石上4-羟基-3-己酮催化脱水制备4-己烯-3-酮

A study on catalytic dehydration of 4-hydroxy-3-hexanone （HH） to 4-hexen-3-one （HO） was carried out through conversion of HH over HZSM-5 zeolite catalyst in a fixed-bed reactor （FBR） operating under almospheric pressure. The test indicated a relatively high activity of the HZSM-5 zeolite capable of achieving a HH conversion of 99.2% and a HO yield of 83.5%. Catalyst deactivation could be prevented by increasing the reaction temperature by 10 ＂C for every 20 h and adding 2.0% of piperidine in the feed. A catalyst stability test （for 100 h） in FBR showed that the catalyst was active even after 100 h of time-on-stream with HH conversion remaining at 99.2% and HO yield still reaching over 83.5%. Regenera- tion experiment showed that the regenerated catalyst demonstrated a catalytic performance comparable to the fresh one.     

Ni/ZnO-HY吸附剂对模型汽油的反应吸附脱硫性能研究

The reactive adsorption desulfurization of model gasoline was carried out on Ni/ZnO-HY adsorbent. The Ni/ZnO-HY adsorbent was characterized by N2 adsorption-desorption test (BET), X-ray diffractometry ...     

Oxidative Dehydrogenation of Isobutane to Isobutene on FSM-16 Doped with Cr and Related Catalysts

The oxidative dehydrogenation of isobutane to isobutene was examined for the use in the preparation of FSM-16 and related compounds doped by chromium with expectations that a yield of isobutene of greater than 8% could be achieved. The activity depended on the molding procedure of the catalyst and the doping method of the chromium species. In the present study, 8.8% and 8.3% of the yield of isobutene were obtained at 0.75 h and 6 h on-stream for the catalyst （Cr-loading; 6.2 wt.%） molded using wet treatment hut not pressurization treatment, in which the chromium species were directly added into the aqueous solution containing raw FSM-16 （hydrated sodium silicate powder） at an initial stage of the catalyst preparation. The structure information was based on XRD （X-ray diffraction）, the specific surface area was determined using a conventional BET （Brunauer-Emmett-Teller） nitrogen adsorption and the loading of chromium was estimated using ICP （inductively coupled plasma）. All those parameters combined with the molding method indicated that the catalytic activity was more influenced by the loading of chromium into bulk but not on surface of the catalyst rather than by the hexagonal structure of FSM-16 and the surface area.     

环烷烃混合烯烃催化裂化：2. 单事件模型评估

The developed SEMK model is used to provide an insight into the contribution of individual reactions in the cracking of methylcyclohexane as well as the site coverage by various carbenium ions. The preferred reaction pathways for the conversion of methylcyclohexane are hydride transfer reactions followed by PCP-isomerizations, deprotonation and endocyclic β-scission, accounting for 61%, 22% and 12% of its disappearance, respectively, at 693 K and 30% conversion of methylcyclohexane. Protolysis plays a minor role in the cracking of methylcyclohexane. Once cyclic diolefins are formed, all of them can be instantaneously transformed to aromatics, which are easily interconverted via disproportionation. Judging from the carbenium ion concentrations it is evident that, at the investigated operating conditions, less than 5% of the acid sites are covered by carbenium ions, less than 2% of which corresponds to cyclic type species including allylic ones.     

Innovative Production of PCMs （Phase Change Materials） Preparation by Vacuum Impregnation： Thermal and Physical Properties

Energy is essential for every human activity for more comfortable life but also consumes more natural resources. In order to control human comfort, temperature usually required when the differences in temperature swing between indoor and outdoor temperatures. PCMs （phase change materials） are the high latent heat materials which can be used in building materials for energy conservation purpose. PCMs can store thermal energy and also can prevent heat to pass through temperature control areas. Paraffin has been used as PCMs are absorbed into the pore of fly ash as paraffin/fly-ash composite and mixed into the buildings materials. Paraffin is an organic material with high melting point （-59℃）, and nonflammable materials therefore paraffin can be used as the building materials for the function of PCMs for energy saving purposes. Composite PCMs can be prepared by vacuum impregnation process. Paraffin in liquid form will be impregnated into the pore of fly ash by vacuum capillary force to form paraffin/fly ash composite PCMs. Vacuum impregnation pressures, vacuum times, impregnation times of liquid paraffin in fly ash pores and temperatures for melting the solid paraffin into the liquid form are all affect on the thermal properties of paraffin/fly ash composite PCMs. Paraffin or PCMs impregnation are also relate to the physical property including the fractal dimensions of the pores of the fly ash particles and paraffin/fly ash composite PCMs. The fractal dimensions of the pore of fly ash and paraffin/fiy ash composites PCMs are between the values of 1.0 and 2.0. Fractal dimensions of paraffin/fly-ash composite PCMs have the same trend as the thermal properties for heat capacity and latent heat of melting. These fractal dimensions technique is a novel method to measure physical property of building material related to latent heat and heat capacity.     

Geochemical Studies and Elemental Contaminants in the Bay of the City of Asuncion

Minor and trace elements composition of bottom sediments from the bay of Asunci6n on the Paraguay River have been investigated by XRF （X-ray fluorescence） techniques to determine their correlation as well as provenance. The analysis of complex spectra was performed by the AXIL software and the quantitative analysis by the QAES （quantitative analysis of environmental samples ） software. Analyzed trace elements were the refractory elements Rb, Sr, Y, Zr, Nb, Ba, La, Ce, Pr, Nd, Zr, Th and others with high field stabilization energy as Cr, Ni, Cu, together with Zn, As, Cd, Pb. Minor elements were Ti, Mn, Fe which are often to the above refractories related. According to their normalized spidergrams, two sets of sediments can be differentiated. Those that show LREE （light rare earth elements） enrichment, negative Nb and Ti anomalies and no spike at Zr and those that have spidergrams very alike, with strong negative anomalies at Nb, Nd and Ti whereas a of Fe versus the refractory elements except Fe-Zr in which correlation seem to be low. positive spike at Zr. In both set, there are strong correlations is negative. Potential hazards of toxic elements in sediments     

Assessment of Sediment and Pollutants in Buyo Lake,Ivory Coast,Using SWAT （Soil and Water Assessment Tool） Model

The changes in land use in the last 30 years in the territory of agro-forest watershed of Lake Buyo resulted in significant sediment into the lake. Sediments are a preferred means of transportation for certain pollutants, like phosphorus in excess. By mapping the source areas of erosion, the authors can determine the risk areas and help to prioritize interventions in the territory. This mapping is done using the SWAT （soil and water assessment tool） model. Several types of data, including topography, land use, soil and climate data are needed to run the model. In this paper, all different steps are presented, from the designing of HRU （hydrological response units）, basic units to run the SWAT model until the simulations. The establishment of HRU has three main stages： space discretization, land use and soil data integration and HRU distribution： （1） space discretization which consist in extracting the limits and the water network of the watershed from the DEM （digital elevation model） and in subdividing them into sub-basins; （2） land use and soil data integration： it consists in digitizing the physical maps of land use and of soils under Mapinfo 7.5 and in keeping them in ＂shape＂ format; （3） HRU distribution： it leads to subdivide the sub-watersheds in small units that combine a single soil type and one type of land use. It appears from this study to obtain 23 sub-watersheds and 71 HRU. Once the HRU designed, it is necessary to integrate climate data, data on physico-chemical characteristics of soils and agricultural practices, before starting the simulations. This will allow the model to assess the risk of sedimentation and eutrophication of the lake using the MUSLE （modified universal soil loss equation） and phosphorus cycle.     

脂肪酸及其衍生物对低硫柴油润滑性影响的分子动力学模拟及实验研究

In this work, fatty acid and its derivatives were adopted as lubricity additives for low sulfur diesel. Tribological evaluation obtained from the High-Frequency Reciprocating Rig (HFRR) apparatus showe...     

铝轧制油中添加剂分子活性与其润滑性能关系的研究

In this paper, an ab initio, local density functional (LDF) method was used to explore the relationship between the molecular properties of additives and the lubricating performance of aluminum rolling...     

柴油在硅藻土分散 NiMoW硫化催化剂上深度加氢脱硫研究

Diatomite-dispersed NiMoW catalyst was prepared and characterized, and the activity of catalyst samples was tested during the HDS reaction of FCC diesel. Sulfur compounds in the feedstock and the hydrogenated products obtained over different catalysts were determined by GC-PFPD. The test results showed that the diatomite-dispersed NiMoW catalyst had high hydrodesulfurization activity for FCC diesel, which could be contributed to the excellent hydrogenation perfor- mance of the said catalyst. Characterization of catalyst by TEM and XRD indicated that the diatomite-dispersed NiMoW catalyst possessed higher layer stacking, larger curvature of MoS2 or WS2, and segregated Ni3S2 crystals relative to the sup- ported catalyst. This kind of structure leads to high hydrogenation activity of the diatomite-dispersed NiMoW catalyst.     

C-Nanostructures Cluster Models in Organic Solvents： Fullerenes,Tubes, Buds and Graphenes

The existence of nanographene in cluster form is discussed in organic solvents. Theories are developed based on the columnlet, bundlet and droplet models describing the size-distribution functions. Phenomena present a unified explanation in the columnlet model in which free energy of Cgraphene involved in cluster is combined from a volume part proportional to the number of molecules n in cluster and a constant. The columnlet model enables describing distribution function of Cgraphene clusters by size. From purely geometrical considerations the columnlet （Cgraphene）, bundlet （single-wall carbon nanotube）, CNT （carbon nanotube）, SWNT （single-wall C-nanotube）, and carbon nanobud, CNB （carbon nanobud）） and droplet （fullerene） models predict dissimilar behaviours. The interaction-energy parameters of Cgraphene are taken from C60. An CNB behaviour or further is expected. The decay of solubility with rising temperature is smaller for Cgraphene than for SWNT and CNB and, furthermore, than for C60, in agreement with lesser numbers of units in Cgraphene clusters. The discrepancy between the experimental data of the heat of solution of fullerenes, CNTs, CNBs and graphenes is ascribed to the sharp concentration dependence of the heat of solution. The diffusion coefficient drops with temperature result greater for Cgraphene than CNB and SWNT than C60 corresponding to lesser number of units in clusters. The aggregates near （C60）13, SWNT/CNB7 and （Cgraphene）3 could be representative of the droplet, bundlet and columnlet models.     

Innovative Production of PCMs （Phase Change Materials） Preparation by Vacuum Impregnation： Mechanical Strength of Mortars Cement with Composite PCMs Content

An experimental investigation was conducted to study the efficiency of thermal insulation of composite PCMs （phase change materials） produced by vacuum impregnation process between paraffin （PCMs） and fly ash particles. DSC （differential scanning calorimeter） has been used to determine the thermal properties of latent heat of melting and heat capacity for composite PCMs. Vacuum impregnation pressure of 40 in.Hg, paraffin melting temperature of 90℃, vacuum time and impregnation time of paraffin of 30 min are the optimum condition of composite PCMs productions. The values of latent heat of melting and heat capacity are 74.00 J/g and 15.726 J/g.℃ for composite PCMs that produces by the optimum condition in vacuum impregnation process. Increasing the amount of composite PCMs replacing for cement in mortars causes the compressive strength, flexural strength and tensile strength reduction. Compressive strength, flexural strength and tensile strength of mortar with and without composite PCMs can be increased by the longer time of water curing for mortar specimens. Thermal conductivity （k） of mortar cement is reduced by increasing the amount of composite PCMs which replaced for cement in mortar plate compositions. Composite PCMs have the efficiency for thermal energy insulation when incorporated into the buildings. Therefore, this property of paraffin/fly ash composites PCMs can reduce the energy consumption for temperature control in the buildings.     

水滑石催化PET的合成及性能研究

Poly(ethylene terephthalate) (PET) was synthesized by the in-situ polymerization method using layered double hydrotalcite (LDH) as the catalyst, and the thermal and lfame retardation properties of PET ...     

Research progress on blending modification process of PP/PA6/2013,24 （5） ： 1-4

PP and PA6 are incompatible systems, so it＇ s necessary to add compatibilizer into the blends to improve the compatibility of the blends. However, the addition of compatibilizer affects the performance of the blend system. This paper analyzed the factors affecting the performance of PP/PA6 system, explained the influence of the blending process and inorganic filler on blend system, and indicated research direction of PP/PA6 blending modification process.     

玉米秸秆的水解糖化研究

In this paper three methods(dilute acid pretreatment, aqueous ammonia/dilute acid pretreatment and alkaline pretreatment) were used to study the hydrolysis of corn stover and characteristics of each method were compared. The results showed that the lignin removal rate was 71.8% when the corn stover was treated with a caustic soda solution containing 1.5% of NaOH, at a temperature of 75 ℃ for 90 min with an initial solid-liquid ratio of 1:8(w/v). Hydrolysis yield of the NaOH pretreated sample reached 78.5%, which was much higher than other control groups. These results are useful for evaluation of pretreatment technologies, and identification of key factors that limit cellulose hydrolysis, and can also serve as a basis for designing and screening appropriate pretreatment technologies.     

二次重建法制备具有大孔容高比表面的大孔-介孔γ-Al2O3

Through improving the aging process during synthesis of the support, γ-Al2O3 with large pore volume and high surface area was synthesized by a facile secondary reforming method. The synthesis parameters, such as the reaction temperature, the first aging temperature and the second aging temperature, were investigated. The textural properties of γ-Al2O3 were characterized by means of N2 adsorption-desorption isotherms, X-ray powder diffractometry(XRD), scanning electron microscopy(SEM), Fourier transform infrared(FTIR) spectroscopy and thermogravimetry(TG). The experimental results indicated that AACH and amorphous AlOOH were the precursors of alumina, which were formed via precipitation from solutions after reaction of aluminum sulphate with ammonium hydrogen carbonate. The precursor nanocrystallites grew and re-assembled during the secondary reforming process, which resulted in an increased pore size and pore volume and a decreased bulk density. The as-synthesized γ-Al2O3 materials featured meso/macroporosity, large pore volume(2.175 cm3/g), high surface area(237.8 m2/g), and low bulk density(0.284 g/mL).     

晶种添加法合成微米颗粒ZSM-5分子筛结晶度的影响因素

ZSM-5 zeolite microparticles （MPs） were synthesized under hydrothermal condition using a low crystal seed addition approach without template. The synthesis parameters such as the seed addition amount, the SiOJA1203 ratio, the aluminum source, the feeding addition method, aging, and crystallization were investigated. The structure, morphology and composition of the as-synthesized ZSM-5 zeolite MPs were characterized by X-ray powder diffraction （XRD）, scanning electron microscopy （SEM）, laser particle size distribution （PSD） measurements, and inductively coupled plasma-atomic emission spectrometry （ICP-AES）. The SIO2/A1203 ratio of ZSM-5 zeolite MPs was in the range of 20~80. The low seed addition was beneficial to improving the crystallinity and shortening the crystallization time, and the suitable amount of seed was 0.25% （SIO2）. The ZSM-5 zeolite MPs synthesized with aluminium nitrate nonahydrate used as the aluminum source exhibited a relatively high crystallinity. An appropriate aging time could eliminate the effect of feeding addition method and effectively adjust particle size. The particle size of ZSM-5 zeolite obtained at an aging time of 20 h was around 2.0 I.tm. Prolonging the aging time appropriately could also shorten the high-temperature crystallization time. The suitable aging time was 24 h, and the relative crystallinity of ZSM-5 zeolite could reach up to 99% after crystallization for 24 h at 180 ℃     

Diatomic Gaseous Sulfur Obtained at Low Temperature Catalytic Decomposition of Hydrogen Sulfide

Experimental evidences of occurrence of gaseous diatomic sulfur produced in the low temperature catalytic decomposition of hydrogen sulfide 2 H2S ←→ 2 H2 ＋ S2 （g） are summarized. The S2 molecule is suggested to be in the ground triplet state. Analysis of literature data allows concluding that the S2 metastable singlet state is realized in the thermal dissociation of hydrogen sulfide and solid sulfur. Arguments in favor of the hypothesis are been discussed.     

Utilization of Crude Glycerol by Yarrowia lipolytica IMUFRJ 50678 in Bioproduct Production

Transesterification is the most common production process for biodiesel. From this reaction, a glycerin phase is produced that is impure, thus lowering market value. However, because it is rich in carbon, it is an alternative for generating bioproducts with a higher added value through bioconversion by microorganisms. The aim of this study was to screen parameters, such as pH （4, 5, 6, 7 and 8） and the initial glycerol concentration at 30 ± ℃ with agitation at 150 rpm for bioemulsifier and lipid synthesis in a submerged medium by Yarrowia lipolytica IMUFRJ 50678 from crude glycerin. The best conditions for bioemulsifier production were 30 ± ℃ at pH： 6 with 50 g/L of initial substrate, which produced 2.7 g/L of lipids, from which the optimum 300.5 mg/L of triglycerides was produced over 48 h of microorganism growth.     

Avocado Nutritional Diagnosis （Persea americana Mill.） ＂Hass＂, Soil Fertility and Water Quality in Ocuituco,Morelos

Morelos is the fourth in area cultivated and production volume of avocado. Of the 13 municipalities where it is farmed, Ocuituco represents 43.51% and Tetela del Volain 27.53%. Despite being one of the main fruit species in Morelos, no information related to the fertility of the soil where it is grown, the quality of water available for irrigation and nutritional status of this important fruit for the state. The study was conducted in the municipality of Ocuituco which identified three agro-habitats taking into account climate, landform, soil type and altitude. In each agro-habitat were carried out soil sampling to determine the physical and chemical characteristics based on the Mexican Official Standard NOM-021-SEMARNAT-2000, the chemical quality of water for irrigation as described by Richards （1954） and crop nutrient status of avocado ＂Hass＂ according to the methodology described by Maldonado （2002）. The soils had different physical and chemical characteristics, as well as the nutritional status of avocado trees in the three agro-habitats. The trees had excessive concentration of CI, Cu and Zn. Indices of optimal percentage deviation expressed different nutritional requirements. The water used for irrigation was of low salinity and sodium content, so it can be used without restrictions.