Chemically Exfoliating Biomass into a Graphene‐like Porous Active Carbon with Rational Pore Structure,Good Conductivity,and Large Surface Area for High‐Performance Supercapacitors

Active carbons have unique physicochemical properties, but their conductivities and surface to weight ratios are much poorer than graphene. A unique and facile method is innovated to chemically process biomass by “drilling” holes with H₂O₂ and exfoliating into graphene‐like nanosheets with HAc, followed by carbonization at a high temperature for highly graphitized activated carbon with greatly enhanced porosity, unique pore structure, high conductivity, and large surface area. This graphene‐like carbon exhibits extremely high specific capacitance (340 F g^?1 at 0.5 A g^?1) and high specific energy density (23.33 to 16.67 W h kg^?1) with excellent rate capability and long cycling stability (remains 98% after 10 000 cycles), which is much superior to all reported carbons including graphene. Synthesis mechanism for deriving biomass into porous graphene‐like carbons is discussed in detail. The enhancement mechanism for the porous graphene‐like carbon electrode reveals that rationally designed meso‐ and macropores are very critical in porous electrode performance, which can network micropores for diffusion freeways, high conductivity, and high utilization. This work has universal significance in producing highly porous and conductive carbons from biomass including biowastes for various energy storage/conversion applications.     

Opening of Bottleneck Pores for the Improvement of Nitrogen Doped Carbon Electrocatalysts

A facile synthesis strategy to control the porosity of ionothermal nitrogen doped carbons is demonstrated. Adenine is used as cheap and biomass based precursor and a mixture of NaCl/ZnCl₂ as combined solvent‐porogen. Variation of the ratio between the two salt influences the pore structure over a wide range. The eutectic mixture leads to micro‐ and mesoporous material with high total pore volume (TPV) of 3.0 cm³ g^?1 and very high surface area of 2900 m² g^?1 essentially rendering the product an “all‐surface‐area” nitrogen doped carbon. Increasing NaCl contents cause a continuous increase of the mesopore size and the formation of additional macropores resulting in a very high maximal TPV of 5.2 cm³ g^?1, showing 2540 m² g^?1 specific surface area using 60 mol% NaCl. Interestingly, the electrocatalytic activity of the samples toward oxygen reduction is strongly affected by the detailed pore structure. The different—however, chemically equivalent—catalysts vary up to 70 mV in their half wave potentials (E _1/2).The sample with optimized pore system shows a high selectivity toward the favored four electron process and an outstanding E _1/2 of ≈880 mV versus reversible hydrogen electrode (RHE), which is one of the best values reported for nitrogen doped carbons so far.     

Adsorption and structure of benzene confined in disordered porous carbons: effect of pore heterogeneity and surface chemistry

Molecular simulations are used to study the adsorption of benzene at 300?K in atomistic models of disordered nanoporous carbons. These models, named as CS400, CS1000 and CS1000a, differ in density and chemical compositions, and reproduce the morphological and topological features present in real nanoporous carbons. We found that the adsorption phenomena depend upon the local structure of nanoporous carbons. To understand the effect of surface chemistry on adsorption and structure of confined benzene, functional groups (–COOH and –C=O) were added to these models. The presence of functional groups led to the onset of adsorption process at a low pressure. The carboxyl groups (–COOH) have a greater impact on adsorption as compared to carbonyl (–C=O) groups. The CS1000a models have wide micropores and thus it exhibits a jump in adsorption isotherm. The jump shifts towards lower pressure on the addition of functional groups, with –COOH groups showing a larger shift. The presence of functional groups also increases the isosteric heat of adsorption, with –COOH groups showing higher values. The coulombic contribution to total fluid–wall interaction energy is higher for –COOH functional groups and decreases on increasing pressure. Benzene confined in CS1000a models exhibit a liquid-like structure.     

Lithium Ion Capacitors in Organic Electrolyte System: Scientific Problems,Material Development,and Key Technologies

Lithium ion capacitors (LICs), which are hybrid electrochemical energy storage devices combining the intercalation/deintercalation mechanism of a lithium‐ion battery (LIB) electrode with the adsorption/desorption mechanism of an electric double‐layer capacitor (EDLC) electrode, have been extensively investigated during the past few years by virtue of their high energy density, rapid power output, and excellent cycleability. In this review, the LICs are defined as the devices with an electrochemical intercalation electrode and a capacitive electrode in organic electrolytes. Both electrodes can serve as anode or cathode. Throughout the history of LICs, tremendous efforts have been devoted to design suitable electrode materials or develop novel type LIC systems. However, one of the key challenges encountered by LICs is how to balance the sluggish kinetics of intercalation electrodes with high specific capacity against the high power characteristics of capacitive electrode with low specific capacitance. Herein, the developments and the latest advances of LIC in material design strategies and key techniques according to the basic scientific problems are summarized. Perspectives for further development of LICs toward practical applications are also proposed.     

Correlation Between Microstructure and Na Storage Behavior in Hard Carbon

Hard carbons are considered among the most promising anode materials for Na‐ion batteries. Understanding their structure is of great importance for optimizing their Na storage capabilities and therefore achieving high performance. Herein, carbon nanofibers (CNFs) are prepared by electrospinning and their microstructure, texture, and surface functionality are tailored through carbonization at various temperatures ranging from 650 to 2800 °C. Stepwise carbonization gradually removes the heteroatoms and increases the graphitization degree, enabling us to monitor the corresponding electrochemical performance for establishing a correlation between the CNFs characteristics and Na storage behavior. Outstandingly, it is found that for CNFs carbonized at above 2000 °C, a single voltage Na uptake plateau at ≈0.1 V with a capacity of ≈200 mAh g^‐1. This specific performance may be nested in the higher degree of graphitization, lower active surface area, and different porous texture of the CNFs at such temperatures. It is demonstrated via the assembly of a CNF/Na₂Fe₂(SO₄)₃ cell the benefit of such CNFs electrode for enhancing the energy density of full Na‐ion cells. This finding sheds new insights in the quest for high performance carbon based anode materials.     

P2 receptors and platelet function

Following vessel wall injury, platelets adhere to the exposed subendothelium, become activated and release mediators such as TXA₂ and nucleotides stored at very high concentration in the so-called dense granules. Released nucleotides and other soluble agents act in a positive feedback mechanism to cause further platelet activation and amplify platelet responses induced by agents such as thrombin or collagen. Adenine nucleotides act on platelets through three distinct P2 receptors: two are G protein-coupled ADP receptors, namely the P2Y₁ and P2Y₁₂ receptor subtypes, while the P2X₁ receptor ligand-gated cation channel is activated by ATP. The P2Y₁ receptor initiates platelet aggregation but is not sufficient for a full platelet aggregation in response to ADP, while the P2Y₁₂ receptor is responsible for completion of the aggregation to ADP. The latter receptor, the molecular target of the antithrombotic drugs clopidogrel, prasugrel and ticagrelor, is responsible for most of the potentiating effects of ADP when platelets are stimulated by agents such as thrombin, collagen or immune complexes. The P2X₁ receptor is involved in platelet shape change and in activation by collagen under shear conditions. Each of these receptors is coupled to specific signal transduction pathways in response to ADP or ATP and is differentially involved in all the sequential events involved in platelet function and haemostasis. As such, they represent potential targets for antithrombotic drugs.     

EPR kinetic studies of the S−1 state in spinach thylakoids

The Y_Z decay kinetics in a formal S₋₁ state, regarded as a reduced state of the oxygen evolving complex, was determined using time-resolved EPR spectroscopy. This S₋₁ state was generated by biochemical treatment of thylakoid membranes with hydrazine. The steady-state oxygen evolution of the sample was used to optimize the biochemical procedure for performing EPR experiments. A high yield of the S₋₁ state was generated as judged by the two-flash delay in the first maximum of oxygen evolution in Joliot flash-type experiments. We have shown that the Y_Z re-reduction rate by the S₋₁ state is much slower than that of any other S-state transition in hydrazine-treated samples. This slow reduction rate in the S₋₁ to S₀ transition, which is in the order of the S₃ to S₀ transition rate, suggests that this transition is accompanied by some structural rearrangements. Possible explanations of this unique, slow reduction rate in the S₋₁ to S₀ transition are considered, in light of earlier observations by others on hydrazine/hydroxylamine reduced PS II samples.     

Highly ordered mesoporous carbons as electrode material for the construction of electrochemical dehydrogenase- and oxidase-based biosensors

In this work, the excellent catalytic activity of highly ordered mesoporous carbons (OMCs) to the electrooxidation of nicotinamide adenine dinucleotide (NADH) and hydrogen peroxide (H(2)O(2)) was described for the construction of electrochemical alcohol dehydrogenase (ADH) and glucose oxidase (GOD)-based biosensors. The high density of edge-plane-like defective sites and high specific surface area of OMCs could be responsible for the electrocatalytic behavior at OMCs modified glassy carbon electrode (OMCs/GE), which induced a substantial decrease in the overpotential of NADH and H(2)O(2) oxidation reaction compared to carbon nanotubes modified glassy carbon electrode (CNTs/GE). Such ability of OMCs permits effective low-potential amperometric biosensing of ethanol and glucose, respectively, at Nafion/ADH-OMCs/GE and Nafion/GOD-OMCs/GE. Especially, as an amperometric glucose biosensor, Nafion/GOD-OMCs/GE showed large determination range (500-15,000mumoll(-1)), high sensitivity (0.053nAmumol(-1)), fast (9+/-1s) and stable response (amperometric response retained 90% of the initial activity after 10h stirring of 2mmoll(-1) glucose solution) to glucose as well as the effective discrimination to the possible interferences, which may make it to readily satisfy the need for the routine clinical diagnosis of diabetes. By comparing the electrochemical performance of OMCs with that of CNTs as electrode material for the construction of ADH- and GOD-biosensors in this work, we reveal that OMCs could be a favorable and promising carbon electrode material for constructing other electrochemical dehydrogenase- and oxidase-based biosensors, which may have wide potential applications in biocatalysis, bioelectronics and biofuel cells.     

Why Gratzel’s cell works so well

In Gratzel’s cell, the electrons injected by the photo-excitation of dye molecules, anchored to a mesoporous TiO₂ film, efficiently diffuse to the back contact achieving solar energy conversion at efficiencies exceeding 10%. The mesoporous TiO₂ surface constituted of randomly arranged nanocrystallites with a roughness factor of the order 1000 is heavily populated with traps, defects and adsorbed species which act as recombination centers. Nevertheless, the cell functions, mitigating recombination expected to occur via the interaction electrons at the surface. Evidence based mainly on 1/f noise measurements is presented to show that dye bonded to the TiO₂ surface passivates recombination centers. Furthermore the suppression of trapping-detrapping events at the surface increases the diffusion coefficient of the electrons through the nanocrystalline matrix facilitating electron transport to the back contact. The Gratzel cell is also unique, none of the high bandgap oxide materials other than TiO₂ yield energy conversion and quantum efficiencies as high as that of the cells based on TiO₂. 1/f noise measurements also reveal a distinct difference between TiO₂ and ZnO mesoporous films suggesting that the films made from the latter material are more intensely populated with surface states that mediate recombination.     

Cellular and molecular response of human macrophages exposed to Aggregatibacter actinomycetemcomitans leukotoxin

Aggregatibacter (Actinobacillus) actinomycetemcomitans is a facultative anaerobic gram-negative bacterium associated with severe forms of periodontitis. A leukotoxin, which belongs to the repeats-in-toxin family, is believed to be one of its virulence factors and to have an important role in the bacterium''s pathogenicity. This toxin selectively kills human leukocytes by inducing apoptosis and lysis. Here, we report that leukotoxin-induced cell death of macrophages proceeded through a process that differs from the classical characteristics of apoptosis and necrosis. A. actinomycetemcomitans leukotoxin-induced several cellular and molecular mechanisms in human macrophages that led to a specific and excessive pro-inflammatory response with particular secretion of both interleukin (IL)-1β and IL-18. In addition, this pro-inflammatory cell death was inhibited by oxidized ATP, which indicates involvement of the purinergic receptor P2X₇ in this process. This novel virulence mechanism of the leukotoxin may have an important role in the pathogenic potential of this bacterium and can be a target for future therapeutic agents.     

Eco-geographically divergent diploids, Caucasian clover (Trifolium ambiguum) and western clover (T. occidentale), retain most requirements for hybridization

Background and Aims

DNA sequence similarities and hybridization patterns in Trifolium (clovers) section Trifoliastrum suggest that rapid radiation from a common ancestral source led to this complex of diverse species distributed across Europe, western Asia and North Africa. Two of the most geographically and ecologically divergent of these species are the rhizomatous T. ambiguum from high altitudes in eastern Europe and western Asia and the stoloniferous T. occidentale from sea level in western Europe. Attempts were made to hybridize these species to ascertain whether, despite this separation, gene flow could be achieved, indicating the retention of the genetic factors necessary for hybridization.

Methods

Three F₁ hybrids formed after embryo rescue were described, characterized by conventional and molecular cytogenetics, subjected to fertility tests and progeny generations were developed.

Results and Conclusions

Partially fertile hybrids between Trifolium ambiguum and T. occidentale were obtained for the first time. The F₁ hybrids produced seeds after open-pollination, and also produced triploid progeny in backcrosses to T. occidentale from the functioning of unreduced gametes in the hybrids. These plants were fertile and produced progeny with T. occidentale and with T. repens. Meiotic chromosome pairing in the F₁ showed six to eight bivalents per pollen mother cell, indicating pairing between the parental genomes. A chromosome-doubled form of one hybrid, produced using colchicine, showed some multivalents, indicative of interspecific chromosome pairing. The hybrid plants were robust and combined phenotypic characteristics of both species, having stolons, thick roots and a few rhizomes. Results show that despite separation by the entire breadth of Europe, the speciation process is incomplete, and these taxa have partially retained most of the genetic compatibilities needed for hybridization (possibly except for endosperm development, which was not tested). The fertile progeny populations could lead to new clover breeding strategies based on new hybrid forms.     

Simultaneous production of citric acid and invertase by Yarrowia lipolytica SUC+ transformants

Simultaneous production of citric acid (CA) and invertase by Yarrowia lipolytica A-101-B56-5 (SUC⁺ clone) growing from sucrose, mixture of glucose and fructose, glucose or glycerol was investigated. Among the tested substrates the highest concentration of CA was reached from glycerol (57.15 g/L) with high yield (Y_CA/S = 0.6 g/g). When sucrose was used, comparable amount of CA was secreted (45 g/L) with slightly higher yield (Y_CA/S = 0.643 g/g). In all cultures amount of isocitrate (ICA) was below 2% of total citrates. Considering invertase production, the best carbon source appeared to be sucrose (72 380 U/L). The highest yield of CA and invertase biosynthesis calculated for 1 g of biomass was obtained for cells growing from glycerol (9.9 g/g and 4325 U/g, respectively). Concentrates of extra- and intracellular invertase of the highest activity were obtained from sucrose as substrate (0.5 and 1.8 × 10⁶ U/L, respectively).     

Microbial diversity of biofilm communities in microniches associated with the didemnid ascidian Lissoclinum patella

We assessed the microbial diversity and microenvironmental niche characteristics in the didemnid ascidian Lissoclinum patella using 16S rRNA gene sequencing, microsensor and imaging techniques. L. patella harbors three distinct microbial communities spatially separated by few millimeters of tunic tissue: (i) a biofilm on its upper surface exposed to high irradiance and O₂ levels, (ii) a cloacal cavity dominated by the prochlorophyte Prochloron spp. characterized by strong depletion of visible light and a dynamic chemical microenvironment ranging from hyperoxia in light to anoxia in darkness and (iii) a biofilm covering the underside of the animal, where light is depleted of visible wavelengths and enriched in near-infrared radiation (NIR). Variable chlorophyll fluorescence imaging demonstrated photosynthetic activity, and hyperspectral imaging revealed a diversity of photopigments in all microhabitats. Amplicon sequencing revealed the dominance of cyanobacteria in all three layers. Sequences representing the chlorophyll d containing cyanobacterium Acaryochloris marina and anoxygenic phototrophs were abundant on the underside of the ascidian in shallow waters but declined in deeper waters. This depth dependency was supported by a negative correlation between A. marina abundance and collection depth, explained by the increased attenuation of NIR as a function of water depth. The combination of microenvironmental analysis and fine-scale sampling techniques used in this investigation gives valuable first insights into the distribution, abundance and diversity of bacterial communities associated with tropical ascidians. In particular, we show that microenvironments and microbial diversity can vary significantly over scales of a few millimeters in such habitats; which is information easily lost by bulk sampling.     

Penetration Rates by Second-stage Juveniles of Meloidogyne spp. and Heterodera glycines into Soybean Roots

The rates of soybean root penetration by freshly hatched second-stage juveniles (J2) of Meloidogyne arenaria, M. hapla, M. incognita, M. javanica, and Heterodera glycines races 1 and 5 were examined over a period of 1 to 240 hours. Heterodera glycines entered roots more quickly than Meloidogyne spp. Penetration by most nematodes was accomplished within 48 hours. The increases in penetration after 48 hours were insufficient to warrant further assessments. Penetration of J2 into roots of soybean seedfings in a styrofoam container was as good or better than in a clay pot. Thus, rapid and accurate root-penetration assessments can be made at 48 hours after inoculation.     

Denitrification likely catalyzed by endobionts in an allogromiid foraminifer

Nitrogen can be a limiting macronutrient for carbon uptake by the marine biosphere. The process of denitrification (conversion of nitrate to gaseous compounds, including N₂ (nitrogen gas)) removes bioavailable nitrogen, particularly in marine sediments, making it a key factor in the marine nitrogen budget. Benthic foraminifera reportedly perform complete denitrification, a process previously considered nearly exclusively performed by bacteria and archaea. If the ability to denitrify is widespread among these diverse and abundant protists, a paradigm shift is required for biogeochemistry and marine microbial ecology. However, to date, the mechanisms of foraminiferal denitrification are unclear, and it is possible that the ability to perform complete denitrification is because of the symbiont metabolism in some foraminiferal species. Using sequence analysis and GeneFISH, we show that for a symbiont-bearing foraminifer, the potential for denitrification resides in the endobionts. Results also identify the endobionts as denitrifying pseudomonads and show that the allogromiid accumulates nitrate intracellularly, presumably for use in denitrification. Endobionts have been observed within many foraminiferal species, and in the case of associations with denitrifying bacteria, may provide fitness for survival in anoxic conditions. These associations may have been a driving force for early foraminiferal diversification, which is thought to have occurred in the Neoproterozoic era when anoxia was widespread.     

Can root electrical capacitance be used to predict root mass in soil?

Background

Electrical capacitance, measured between an electrode inserted at the base of a plant and an electrode in the rooting substrate, is often linearly correlated with root mass. Electrical capacitance has often been used as an assay for root mass, and is conventionally interpreted using an electrical model in which roots behave as cylindrical capacitors wired in parallel. Recent experiments in hydroponics show that this interpretation is incorrect and a new model has been proposed. Here, the new model is tested in solid substrates.

Methods

The capacitances of compost and soil were determined as a function of water content, and the capacitances of cereal plants growing in sand or potting compost in the glasshouse, or in the field, were measured under contrasting irrigation regimes.

Key Results

Capacitances of compost and soil increased with increasing water content. At water contents approaching field capacity, compost and soil had capacitances at least an order of magnitude greater than those of plant tissues. For plants growing in solid substrates, wetting the substrate locally around the stem base was both necessary and sufficient to record maximum capacitance, which was correlated with stem cross-sectional area: capacitance of excised stem tissue equalled that of the plant in wet soil. Capacitance measured between two electrodes could be modelled as an electrical circuit in which component capacitors (plant tissue or rooting substrate) are wired in series.

Conclusions

The results were consistent with the new physical interpretation of plant capacitance. Substrate capacitance and plant capacitance combine according to standard physical laws. For plants growing in wet substrate, the capacitance measured is largely determined by the tissue between the surface of the substrate and the electrode attached to the plant. Whilst the measured capacitance can, in some circumstances, be correlated with root mass, it is not a direct assay of root mass.     

Relationship Between Structural Properties and Electrochemical Characteristics of Monolithic Carbon Xerogel‐Based Electrochemical Double‐Layer Electrodes in Aqueous and Organic Electrolytes

The impact of the micropore width, external surface area, and meso‐/macropore size on the charging performance of electrochemical double‐layer capacitor (EDLC) electrodes is systematically investigated. Nonactivated carbon xerogels are used as model electrodes in aqueous and organic electrolytes. Monolithic porous model carbons with different structural parameters are prepared using a resorcinol‐formaldehyde‐based sol–gel process and subsequent pyrolysis of the organic precursors. Electrochemical properties are characterized by utilizing them as EDLC half‐cells operated in aqueous and organic electrolytes, respectively. Experimental data derived for organic electrolytes reveals that the respective ions cannot enter the micropores within the skeleton of the meso‐ and macroporous carbons. Therefore the total capacitance is limited by the external surface formed by the interface between the meso‐/macropores and the microporous carbon particles forming the xerogel skeleton. In contrast, for aqueous electrolytes the total capacitance solely depends on the total surface area, including interfaces at the micropore scale. For both types of electrolytes the charging rate of the electrodes is systematically enhanced when increasing the diameter of the carbon xerogel particles from 10 to 75 nm and the meso‐/macropore size from 10 to 121 nm.     

Mutualism favours higher host specificity than does antagonism in plant–herbivore interaction

Coevolved mutualisms often exhibit high levels of partner specificity. Obligate pollination mutualisms, such as the fig–fig wasp and yucca–yucca moth systems, represent remarkable examples of such highly species-specific associations; however, the evolutionary processes underlying these patterns are poorly understood. The prevailing hypothesis suggests that the high degree of specificity in pollinating seed parasites is the fortuitous result of specialization in their ancestors because these insects are derived from endophytic herbivores that are themselves highly host-specific. Conversely, we show that in the Glochidion–Epicephala obligate pollination mutualism, pollinators are more host-specific than are closely related endophytic leaf-feeding taxa, which co-occur with Epicephala on the same Glochidion hosts. This difference is probably not because of shifts in larval diet (i.e. from leaf- to seed-feeding), because seed-eating lepidopterans other than Epicephala do not show the same degree of host specificity as Epicephala. Species of a tentative sister group of Epicephala each attack several distantly related plants, suggesting that the evolution of strict host specificity is tied to the evolution of pollinator habit. These results suggest that mutualists can attain higher host specificity than that of their parasitic ancestors and that coevolutionary selection can be a strong promoter of extreme reciprocal specialization in mutualisms.