采用RATRP沉淀聚合法合成聚合物PMMA和PSt

以甲基丙烯酸甲酯(MMA)或苯乙烯(St)为单体,偶氮二异丁腈(AIBN)为引发剂,乙醇为溶剂,CuCl2/PMDETA(N,N,N’,N″,N″-五甲基二乙烯基三胺)为催化体系,MMA或St经反向原子转移自由基沉淀聚合法合成了聚合物PMMA或PSt。研究结果表明:PMMA和PSt的分子量分布较窄(Mw/Mn<1.3),聚合反应速率对单体呈一级动力学特征,数均分子量与单体转化率呈线性关系。反应具有"活性"/可控聚合的特征。     

甲基丙烯酸N,N-二甲氨基乙酯/丙烯酸N,N-二甲氨基乙酯的可逆加成断裂链转移聚合研究

合成了二硫代苯甲酸2- (乙氧基羰基)异丙酯(ECPDB)、二硫代苯甲酸异丙苯酯(CDB)、二硫代苯甲酸1 苯基乙酯(PEDB) 3种二硫代苯甲酸酯链转移剂.以这3种转移剂为基础,用凝胶渗透色谱和核磁共振测试了甲基丙烯酸N ,N 二甲氨基乙酯(DMAEMA)和丙烯酸N ,N 二甲氨基乙酯(DMAEA)两种碱性单体的可逆加成断裂链转移(RAFT)聚合的聚合物分子量、分子量分布和结构.发现有的聚合体系聚合物分子量分布较窄,但实验数均分子量与理论数均分子量相差较大;有的体系则转化率很低,聚合物分子量很小.这些可能是由聚合体系中单体活性和链转移剂链转移能力之间的匹配不太协调,使可逆加成断裂链转移快速平衡反应发生偏移或破坏造成的.因此,可通过更换单体或链转移剂来调节这种匹配,从而使可逆加成断裂链转移快速平衡保持稳定,达到聚合更可控,实验分子量与理论分子量更接近,分子量分布更窄的目的.     

咪唑基二硫代甲酸苄酯存在下60Coγ射线辐照丙烯酸甲酯的快速活性自由基聚合

研究了在咪唑基二硫代甲酸苄酯存在下60Coγ射线(52.5Gy/min)辐照丙烯酸甲酯单体的自由基聚合行为.分别用GPC和1HNMR对聚合物分子量及分布和聚合物结构进行了表征.结果表明,该聚合体系呈现活性自由基聚合的特征,即聚合物分子量随单体转化率呈线性增长,分子量分布较窄,ln([M]0/[M])和聚合时间之间存在线性关系.与其它活性自由基聚合体系相比,本体系的聚合速度非常快,聚合到68min时聚合物分子量即可达到39600g/mol(转化率68%,Mw/ Mn=1.08).     

苯乙烯与N-取代马来酰亚胺的可逆加成-断裂链转移交替共聚合

研究了二硫代苯甲酸酯存在下偶氮二异丁腈引发苯乙烯(St)、St与N-对羟基苯基马来酰亚胺(HPM)、St与N-对(2-氯/溴丙酰氧基)苯基马来酰亚胺(CPPM/BPPM)的可逆加成-断裂链转移(RAFT)均/共聚,聚合物的结构由紫外-可见光(UV-Vis)与凝胶渗透色谱(GPC)表征.结果表明,St的RAFT均聚以及St与N-取代马来酰亚胺的RAFT共聚均呈现活性聚合特征,分子量随着转化率上升而增加,且分子量分布较窄.对于St的RAFT均聚,由于双基终止,聚苯乙烯(PSt)链中"戴帽效率"随着转化率上升逐渐下降.对于St与N-取代马来酰亚胺的RAFT共聚合,电荷转移复合物的形成显著地提高了共聚反应速度,并促进交替结构的形成.随后进行了以P(St-alt-BPPM)引发St的原子转移自由基聚合以制备梳型PSt,结果表明在强极性溶剂中进行的聚合过程失去可控性,所得产物分子量极宽,而在本体聚合中所得聚合物分子量相对较窄,有一定的可控性.     

二茂钛/锡/环氧化合物引发苯乙烯活性自由基聚合的研究

采用单茂钛CpTiCl3和二茂钛金属化合物(n-BuCp)2TiCl2,引发剂4-甲氧苯基缩水甘油基醚(I1),1,4-丁二醇二缩水甘油基醚(I2),4,4′-亚甲基二(N,N-二缩水甘油基苯胺)(I4)和苯基缩水甘油基醚甲醛共聚物(I5)及还原剂Sn组成引发体系,引发苯乙烯活性自由基聚合,合成线型和多臂聚合物.探讨了不同茂钛金属化合物、引发剂和还原剂对苯乙烯聚合的影响;并采用13C-NMR和GPC对聚苯乙烯的结构和性能进行了表征.结果表明所得聚合物是无规聚苯乙烯,聚合物分子量高,分子量分布窄.聚合行为属于活性自由基聚合.     

以双硫酯为链转移剂的活性自由基聚合

合成并研究了两种双硫酯链转移剂的纯化方法 ,进行了多种单体以双硫酯为链转移剂的活性自由基聚合及嵌段共聚 .发现以PhC(S)SC(CH3) 2 Ph为链转移剂的效果比PhC(S)SCH(CH3)Ph好 ,聚合产物的多分散性系数较小 .引发剂与链转移剂的摩尔数比为 1∶3 5～ 1∶4 2时 ,得到多分散性系数小 ,实测分子量与理论分子量相近的聚合产物 .聚合物的分子量随时间和转化率的增加而增加 ,加入第二单体形成嵌段共聚物 ,具有活性聚合特征 .聚甲基丙烯酸酯大分子引发剂引发丙烯酸酯单体聚合时 ,聚合速度最快 .     

新引发体系引发MMA活性自由基聚合

近年来 ,关于活性自由基聚合的研究极为活跃 ,已经发现了多种基于增长链自由基被可逆钝化形成休眠种的活性自由基聚合方法[1,2 ] .它们主要包括引发转移终止剂 ( Iniferter) ,稳定自由基聚合( SFRP) ,原子转移自由基聚合 ( ATRP) ,可逆加成 -断链链转移聚合 ( RAFT)等 .其中 ATRP因其具有可聚合单体多 ,反应条件相对缓和等优点而成为该领域的研究热点 [3～ 5] .ATRP活性自由基聚合的实现主要是在过渡金属催化剂的作用下 ,通过循环往复的碳 -卤键的活化、加成、碳 -卤键的再形成而得到最终活性的聚合物 ,引发体系由引发剂、过渡金属…     

4,4'-二甲氧基二苯基氮氧自由基调控甲基丙烯酸甲酯聚合

以4,4'-二甲氧基二苯胺为原料,过硫酸氢钾复合盐(Oxone)为氧化剂,通过一步反应合成了苯环类氮氧自由基——4,4'-二甲氧基二苯基氮氧自由基(DMDPN),并与引发剂偶氮二异丁腈(AIBN)组成双分子体系进行甲基丙烯酸甲酯(MMA)的调控聚合.用重量法测定转化率、凝胶渗透色谱(GPC)测定分子量及分布.研究了氮氧自由基/引发剂比以及聚合温度对聚合动力学和聚合物分子量及分布的影响,并对得到聚合物进行了再引发反应以及1H核磁共振表征.结果表明该体系下,氮氧自由基与增长自由基之间无明显的氢转移副反应发生,聚合过程中分子量随转化率线性增加,且聚合物末端具有活性,能进行再次链增长,体现出可控/"活性"自由基聚合的特点.确定了最佳氮氧自由基/引发剂摩尔比为1.6∶1、最佳聚合温度为120℃,并在70℃下实现了MMA的调控聚合.     

溶剂热体系中甲基丙烯酸甲酯的原子转移自由基聚合

以FeCl3/ PPh3为催化体系,在无引发剂、溶剂热体系中进行甲基丙烯酸甲酯(MMA)的原子转移自由基聚合(ATRP)反应.考察了反应温度与还原剂对反应的影响.实验结果表明,在溶剂热体系中进行的MMA聚合反应符合"活性"/可控聚合,聚合过程中转化率和分子量随时间的增加而增大,所得聚甲基丙烯酸甲酯分子量分布较窄.     

利用反向原子转移自由基聚合反应合成聚甲基丙烯酸缩水甘油酯

以偶氮二异丁腈为引发剂,CuBr2/bpy为催化体系,甲基丙烯酸缩水甘油酯(GMA)通过反向原子转移自由基聚合反应合成了聚甲基丙烯酸缩水甘油酯(PGMA),其结构经1H NMR,IR和GPC确证。聚合反应符合活性自由基聚合特征,在聚合过程中GMA转化率和PGMA分子量随反应时间的延长而增大,分子量分布较窄。     

REVERSE ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE WITH COPPER-BASED CATALYST

 "Living"/controlled radical polymerization of styrene was carried out with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS)/CuCl₂/bipyridine (bipy) initiation system at 120℃. The molecular weights of resultant PSt increased with the monomer conversion and the polydispersities were in the range of 1.37 ～ 1.52. A linear ln([M]o/[M])versus time plot was also obtained indicating the constant concentration of growing radicals during the polymerization with this initiation system. End group analysis by ¹H-NMR spectroscopic studies showed that the end groups of the polymer obtained is cω-functionalized by a chlorine group from the catalyst and a-functionalized by a (carbethoxy-cyano-phenyl)methyl group from the fragments of the initiator. Having C1 atom at the chain end, the PSt obtained can be used as a macroinitiator to promote a chain-extension reaction with fresh St and block copolymerization reaction with a second monomer, such as methyl methacrylate, in the presence of CuC1/bipy catalyst via a conventional ATRP process.     

含有热引发转移终止剂的引发体系在反向原子转移自由基聚合中的应用

原子转移自由基聚合 (ATRP)是实现活性聚合的一种颇为有效的途径 ,可以实现多种单体的活性自由基聚合 .反向原子转移自由基聚合 (ReverseATRP)的概念始提出于 1995年 ,是对传统ATRP的改进和拓展 .近年来关于此体系的引发剂的拓展、过渡金属及单体的适用性都得到了很大发展 .本文简要综述了我们研究组在反向原子转移自由基聚合方面的研究进展     

Reverse atom transfer radical polymerization of vinyl monomers with Fe[SC(S)NEt2]3 alone as the catalyst

The living radical polymerization of methyl methacrylate and styrene was successfully carried out with diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS)/ferric tri(diethyldithiocarbamate) as a novel reverse atom transfer radical polymerization initiation system in which DCDPS was a hexa‐substituted ethane‐type thermal iniferter, DC was a diethyldithiocarbamate group, and no additional ligands such as nitrogen‐ or phosphine‐based compounds were required. The bulk polymerization of methyl methacrylate was carried out at 95 °C, and that of styrene was carried out at 120 °C. Poly(methyl methacrylate) and polystyrene (PSt) with high molecular weights and quite narrow molecular weight distributions (as low as 1.09 for PSt) were obtained. ¹H NMR spectroscopy revealed the presence of an α‐(carbethoxycyanophenyl)methyl group from the initiator and an ω‐DC group from the catalyst in the obtained polymers. Various chain‐extension reactions under UV light or thermal treatments were successfully conducted to prove the presence and efficient reinitiating of the ω‐DC group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3464–3473, 2001     

“Living” radical polymerization of methyl methacrylate with diethyl 2,3-dicyano-2,3-diphenylsuccinate as a thermal iniferter

The bulk polymerization of methyl methacrylate (MMA) initiated with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS) was studied. This polymerization showed some “living” characteristics; that is, both the yield and the molecular weight of the resulting polymers increased with reaction time, and the resultant polymer can be extended by adding MMA. The molecular weight distribution of PMMA obtained at high conversion is fairly narrow (M_w/M_n = 1.24≈1.34). It was confirmed that DCDPS can serve as a thermal iniferter for MMA polymerization by a “living” radical mechanism. Furthermore, the PMMA obtained can act as a macroinitiator for radical polymerization of styrene (St) to give a block copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4610–4615, 1999     

PdCl2-NiCl2-PPh3/PVP催化苯乙烯高区域选择性的氢酯化反应

烯烃与CO和醇的催化氢酯化反应是合成竣酸酯的一种简便方法．当烯烃是芳香烯烃时,其产物可用来制备极有价值的非自类解热镇痛抗炎药物ibaprofe。。、naproxen（支链型2一芳基丙酸类）：ArCH。（二。＋CO＋ROH、ArCH（CH。）COOR＋ArCH。CH。COOR＋ArCHfH。toRPd（OAc）。－rnontmorlllonlte－PPh。－HC卜和Pd（OAc）。－PPh。－p－toluenesulfonicacid'惮金属体系在高PPh。／Pd比的PPhs存在下,可高转化率、高选择性地催化芳香烯烃氢酯化反应生成支链酯．近年来高分子负载的双金属体系在选择性加氢"'、加氢脱氯"'中表…     

活性正离子聚合与原子转移自由基聚合转换合成聚β-蒎烯接枝共聚物

通过活性正离子聚合与原子转移自由基聚合(ATRP)转换合成了β-蒎烯与甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、苯乙烯(St)的新型接枝共聚物.首先以α-氯代乙苯/TiCl4/Ti(OiPr)4/nBu4NCl体系引发β-蒎烯活性正离子聚合,合成预定分子量大小和窄分子量分布的聚β-蒎烯,然后经N-溴代琥珀酰亚胺(NBS)定量溴化,得到溴化聚β-蒎烯大分子引发剂(Br/β-蒎烯链节摩尔比为0.5).然后将该大分子引发剂与溴化亚铜(CuBr)/2,2′-联吡啶(bpy)复合,引发MMA、BA、St进行ATRP接枝聚合.接枝反应显示一级动力学特征,且产物的分子量及分子量分布可控,表明上述ATRP接枝聚合反应具有可控聚合特征.接枝产物的结构经1H-NMR分析得到进一步证实.     

Atom transfer radical polymerization from nanoparticles: a tool for the preparation of well-defined hybrid nanostructures and for understanding the chemistry of controlled/"living" radical polymerizations from surfaces

Structurally well-defined polymer--nanoparticle hybrids were prepared by modifying the surface of silica nanoparticles with initiators for atom transfer radical polymerization and by using these initiator-modified nanoparticles as macroinitiators. Well-defined polymer chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polystyrene or poly(methyl methacrylate) layer. In both cases, linear kinetic plots, linear plots of molecular weight (M(n)) versus conversion, increases in hydrodynamic diameter with increasing conversion, and narrow molecular weight distributions (M(w)/M(n)) for the grafted polymer samples were observed. Polymerizations of styrene from smaller (75-nm-diameter) silica nanoparticles exhibited good molecular weight control, while polymerizations of methyl methacrylate (MMA) from the same nanoparticles exhibited good molecular weight control only when a small amount of free initiator was added to the polymerization solution. The difference in polymerization behavior for styrene and MMA was ascribed to the facts that styrene undergoes thermal self-initiation while MMA does not and that termination processes involving freely diffusing chains are faster than those involving surface-bound chains. The polymerizations of both styrene and MMA from larger (300-nm-diameter) silica nanoparticles did not exhibit molecular weight control. This lack of control was ascribed to the very high initial monomer-to-initiator ratio in these polymerizations. Molecular weight control was induced by the addition of a small amount of free initiator to the polymerization but was not induced when 5--15 mol % of deactivator (Cu(II) complex) was added.     

一种大分子引发剂的引发作用研究

将溶液聚合合成的α-甲基苯乙烯(AMS)和甲基丙烯酸缩水甘油酯(GMA)的低相对分子质量共聚物(计为PAG)作为大分子引发剂,分别研究了PAG引发单体甲基丙烯酸甲酯(MMA)和苯乙烯(St)的本体聚合反应,采用GPC和FTIR等手段对聚合产物进行了表征.研究结果表明,在加热到一定温度时,PAG具有引发作用,可以引发MMA和St进行本体聚合反应;聚合产物具有再引发功能,且其分子量与聚合物产率和聚合反应时间之间均有较好的线性关系.