Significantly enhanced pyroelectric performance in novel sodium niobate-based lead-free ceramics by compositional tuning

In this study, (1 − x)NaNbO₃–xBa_0.6(Bi_0.5K_0.5)_0.4TiO₃ (abbreviated as NN-xBBKT, x = 0.05, 0.10, 0.15, and 0.20) lead-free pyroelectric ceramics were synthesized by conventional solid-state reaction method. Moreover, their microstructure, phase structure, dielectric, ferroelectric, piezoelectric, and pyroelectric characteristics were studied systematically. The X-ray diffraction result showed that the phase structure of NN-xBBKT ceramics changed from orthorhombic to tetragonal and finally became pseudocubic symmetry. The ferroelectric-paraelectric phase transition temperature and depolarization temperature shifted to lower temperature with the increase in BBKT content. Furthermore, with increasing BBKT content, piezoelectric coefficient, figures of merit, and pyroelectric coefficient first increased and then decreased. The optimum pyroelectric properties (eg F_d = 0.81 × 10⁻⁵ Pa^−1/2, F_v = 1.02 × 10⁻² m² C⁻¹, F_i = 1.04 × 10⁻¹⁰ m V⁻¹, and p = 3.11 × 10⁻⁸ C cm⁻² K⁻¹) were observed in sample composition with x = 0.15. More importantly, the pyroelectric coefficient of ceramic with x = 0.15 also displayed relatively high thermal stability because of high depolarization temperature (~110°C). These parameters demonstrate that the novel Pb-free NaNbO₃-based ceramics form an important class of pyroelectric material with broad range of application prospect.     

Enhanced pyroelectric performance in potassium sodium niobate-based ceramics via multisymmetries coexistence design

Achieving excellent pyroelectric performance remains a challenge for lead-free piezoelectric ceramics. To meet the requirements of both an enhanced pyroelectric coefficient at room temperature and good thermal stability during the encapsulation of pyroelectric devices, (1–x)K_0.48Na_0.52NbO₃–xBi_0.5Ag_0.5ZrO₃–0.2%Fe₂O₃ (KNN–BAZ–Fe) lead-free ferroelectric ceramics with high Curie temperatures were prepared to obtain improved pyroelectric performance via the coexistence of multiple symmetries. The variation of BAZ content led to the formation of rhombohedral–orthorhombic–tetragonal phase boundary and promoted grain growth, resulting in the best pyroelectric coefficient (p = 5.09 × 10⁻⁴ C m⁻²°C⁻¹) and enhanced figures of merit (F_i = 0.2084 × 10⁻⁹ (m V⁻¹), F_v = 0.0142 m² C⁻¹, F_d = 0.0947 × 10⁻⁴ Pa^−1/2, and F_e = 17.66 J m⁻³ K⁻²) for infrared (IR) detection when x = 0.05. The room-temperature pyroelectric coefficient obtained in this study is approximately four times that of the pure KNN ceramic and is the maximum value reported for niobate-based piezoelectric ceramics. Moreover, compared with the poor thermal stability of barium titanate- and bismuth sodium titanate-based ceramics because of their ultralow Curie temperature or thermal depolarization temperature, the ceramics investigated here exhibit much better thermal stability because of their high Curie temperature (T_C > 300°C) and diffused phase-transition behavior, making them more adaptable for practical applications. These results suggest that KNN–xBAZ–Fe ceramics are attractive candidates for applications in the field of IR sensors.     

High pyroelectric performance in Pb0.99Nb0.02[(Zr0.57Sn0.43)0.94Ti0.06]0.98O3/Al2O3 composites by design

High pyroelectric performance around human body temperature is essential for ultra-sensitive infrared detectors of medical systems. Herein, toward human health monitoring, composite ceramics (1-x)Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_0.94Ti_0.06]_0.98O₃/xAl₂O₃ (x = 0, 0.1, and 0.2) were designed. A metastable ferroelectric (FE) phase was induced in the anti-FE matrix by the Al₂O₃ component-induced internal stress, and in turn FE-anti-FE phase boundary was constructed. The ceramics at x = 0.2 exhibit high pyroelectric coefficient with p = 10.9 × 10⁻⁴ C·m⁻²·K⁻¹ and figures of merit with current responsivity F_i = 6.23 × 10⁻¹⁰ m·V⁻¹, voltage responsivity F_v = 12.71 × 10⁻² m²·C⁻¹, and detectivity F_d = 7.03 × 10⁻⁵ Pa^−1/2 around human body temperature. Moreover, the enhanced pyroelectric coefficients exist in a broad operation temperature range with a large full width at half maximums of 18.5°C and peak value of 29.2 × 10⁻⁴ C·m⁻²·K⁻¹ at 48.2°C. The designed composite ceramic is a promising candidate for infrared thermal imaging technology of noncontact human health monitoring system.     

High pyroelectric response in Pb0.99Nb0.02[(Zr0.57Sn0.43)1−xTix]0.98O3 ceramics

Both high pyroelectric coefficient and figure of merits of ferroelectric materials are desirable for infrared detection. In this work, we prepared Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_1−xTi_x]_0.98O₃ (0.060 ≤ x ≤ 0.080) ceramics, and the microstructure and electric properties were studied systematically. It is observed that the composition x = 0.07 shows enhanced pyroelectric properties around ambient temperature due to the ferroelectric–antiferroelectric phase transition, with the pyroelectric coefficient p = 6.83 × 10⁻⁴ C m⁻² K⁻¹ and the figures of merit F_i = 5.04 × 10⁻¹⁰ m V⁻¹, F_v = 7.61 × 10⁻² m² C⁻¹, and F_d = 3.46 × 10⁻⁵ Pa^−1/2 at room temperature and the highest pyroelectric coefficient of 695.5 × 10⁻⁴ C m⁻² K⁻¹ and F_i = 1410.46 × 10⁻¹⁰ m V⁻¹, F_v = 1587.39 × 10⁻² m² C⁻¹, and F_d = 1182.94 × 10⁻⁵ Pa^−1/2 at 36.7°C. These values are superior to other pyroelectric materials. These results indicate that this system is a promising pyroelectric material for the applications of infrared detectors.     

Enhanced pyroelectric properties in (Bi0.5Na0.5)TiO3–BiAlO3–NaNbO3 ternary system lead‐free ceramics

High pyroelectric performance and good thermal stability of pyroelectric materials are desirable for the application of infrared thermal detectors. In this work, enhanced pyroelectric properties were achieved in a new ternary (1?x)(0.98(Bi_0.5Na_0.5)(Ti_0.995Mn_0.005)O₃–0.02BiAlO₃)–xNaNbO₃ (BNT–BA–xNN) lead‐free ceramics. The effect of NN addition on the microstructure, phase transition, ferroelectric, and pyroelectric properties of BNT–BA–xNN ceramics were investigated. It was found that the average grain size decreased as x increased to 0.03, whereas increased with further NN addition. The pyroelectric coefficient p at room temperature (RT) was significantly increased from 3.87 × 10^?8Ccm^?2K^?1 at x = 0 to 8.45 × 10^?8Ccm^?2K^?1 at x = 0.03. The figures of merit (FOMs), F_i, F_v and F_d, were also enhanced with addition of NN. Because of high p (7.48 × 10^?8Ccm^?2K^?1) as well as relatively low dielectric permittivity (~370) and low dielectric loss (~0.011), the optimal FOMs at RT were obtained at x = 0.02 with F_i = 2.66 × 10^?10 m/V, F_v = 8.07 × 10^?2 m²/C, and F_d = 4.22 × 10^?5 Pa^?1/2, which are superior to other reported lead‐free ceramics. Furthermore, the compositions with x ≤ 0.03 exhibited excellent temperature stability in a wide temperature range from 20 to 80°C because of high depolarization temperature (≥110°C). Those results unveil the potential of BNT–BA–xNN ceramics for infrared detector applications.     

Achieving single domain in rhombohedral and tetragonal Mn-doped Pb(In1/2Nb1/2)-Pb(Mg1/3Nb2/3)-PbTiO3 crystals for infrared detecting applications

The [111]-oriented rhombohedral Mn-doped 0.15Pb(In_1/2Nb_1/2)-0.55Pb(Mg_1/3Nb_2/3)O₃-0.30PbTiO₃ (Mn:PIMNT(15/55/30)) crystal and the [001]-oriented tetragonal Mn-doped 0.29Pb(In_1/2Nb_1/2)-0.29Pb(Mg_1/3Nb_2/3)O₃-0.42PbTiO₃ (Mn:PIMNT(29/29/42)) crystal were poled under different conditions. The pyroelectric performance of the two crystals as a function of poling temperature, as well as the relationship with ferroelectric domain configuration and phase structure was investigated systematically. The pyroelectric properties of the two crystals enhance with rising the poling temperature, which can be attributed to the improvement of the single state. And for the rhombohedral Mn:PIMNT(15/55/30) crystal locating near morphotropic phase boundary (MPB), the increase of tetragonal phase induces the deterioration of pyroelectric properties. Due to more residual tetragonal phase, the pyroelectric coefficient of the Mn:PIMNT(15/55/30) crystal poled at 150°C is lower than that poled at 100°C. In general, both the crystals poled above T_C achieve nearly single state, exhibiting the best pyroelectric properties with relatively high Curie temperature (T_C), where P = 9.71 × 10⁻⁴ C m⁻² K⁻¹, F_i = 3.88 × 10⁻¹⁰ m V⁻¹, F_v = 0.068 m² C⁻¹ and F_d = 29.7 × 10⁻⁵ Pa^−1/2 for the rhombohedral Mn:PIMNT(15/55/30) crystal (T_C = 171°C) and P = 6.78 × 10⁻⁴ C m⁻² K⁻¹, F_i = 2.71 ×10⁻¹⁰ mV⁻¹, F_v = 0.1 m² C⁻¹, F_d = 23.54 × 10⁻⁵ Pa^−1/2 for the tetragonal Mn:PIMNT(29/29/42) single crystal (T_C = 251°C), meeting the stable operation of infrared detector at relatively high environmental temperatures.     

Structures and pyroelectric properties for [111]-oriented Mn-doped rhombohedral 0.36PIN-0.36PMN-0.28PT crystal

The crystal structures, pyroelectric properties, and thermal stability of [111]-oriented 0.5 mol% Mn-doped 0.36Pb(In_1/2Nb_1/2)O₃-0.36Pb(Mg_1/3Nb_2/3)O₃-0.28PbTiO₃ (Mn-0.36PIN-0.36PMN-0.28PT) ternary single crystal were investigated. The temperature dependence of the Raman spectra and dielectric properties revealed that the crystal exhibited a rhombohedral (R) structure at room temperature, and ferroelectric R → tetragonal (T) and ferroelectric T to paraelectric cubic (C) phase transitions at 130 and 175°C respectively. The single crystal had a high remnant polarization of P_r = 38 μC cm^–2 and coercive field of E_C = 12 kV cm^–1 at room temperature and a frequency of f = 100 Hz. The values of P_r and E_C decreased with increasing temperature, exhibiting anomalies near their phase-transition temperatures, which coincided with changes in the Raman spectra and dielectric properties. Furthermore, at 25°C and f = 100 Hz, the single crystal had high pyroelectric coefficients of p = 8.7 × 10⁻⁴ C m⁻² K⁻¹, figures of merit for the current responsivity of F_i = 3.5 × 10⁻¹⁰ m V⁻¹, the voltage responsivity of F_v = 0.08 m² C⁻¹, and the detectivity of F_d = 30.1 × 10⁻⁵ Pa^−1/2. These values were weakly dependent on temperature below 120°C. In addition, the room-temperature pyroelectric coefficients of the ternary single crystal maintain over 83% of the original value at thermal annealing temperatures below 120°C. These outstanding pyroelectric properties, together with high thermal stability, indicate that [111]-oriented rhombohedral Mn-0.36PIN-0.36PMN-0.28PT ternary single crystal is a new potential candidate for infrared detection applications.     

Electrocaloric effect and pyroelectric performance in (K,Na)NbO3-based lead-free ceramics

The issue of how to achieve an electrocaloric effect (ECE) and pyroelectric effect in a material simultaneously remains to be a challenge for developing practical solid-state cooling devices and RF-detectors. Here, we structure a polymorphic phase transition (PPT) region by doping modification in KNN-based ceramics, which are developed to achieve the ECE. The direct measured ECE and pyroelectric properties are investigated in lead-free (1-x)K_0.5Na_0.5NbO₃-xBi_0.5Na_0.5ZrO₃ (KNN-xBNZ) ceramics. The adiabatic temperature change (∆T) of 0.22 K at 100°C, 0.14 K at 70°C and 0.16 K at 30°C can be obtained under an electric field of 35 kV cm^–1 for x = 0.03, 0.04 and 0.05, respectively. In addition, the temperature dependence of pyroelectric coefficient (p) is established for all compositions via the Byer-Roundy method. A large p of 454.46 × 10^–4 C m^–2 K^–1 is detected at Curie temperature (T_C) in the ceramics with x = 0.03. Achieving electrocaloric effect and pyroelectric performance simultaneously may shed light and provide a feasible design scheme for developing practically useful electrocaloric and pyroelectric materials.     

Enhanced pyroelectric properties of lead-free BNT-BA-KNN ceramics for thermal energy harvesting

In this work, (1−x)(0.98Bi_0.5Na_0.5TiO₃-0.02BiAlO₃)-x(Na_0.5K_0.5)NbO₃ (BNT-BA-xKNN) lead-free pyroelectric ceramics were prepared by a solid-state reaction method. The effect of Na_0.5K_0.5NbO₃ (KNN) content on microstructure, phase transition, and electrical properties of the BNT-BA-xKNN ceramics were systematically investigated. The results show that the appropriate content of KNN can induce the formation of the tetragonal structure, which results in the decreased ferroelectric-antiferroelectric phase transition temperature as a result of the break of long-range translational symmetry of BNT lattices. Therefore, the ferroelectric and pyroelectric properties of the BNT-BA-xKNN near room temperature are improved. The room-temperature pyroelectric coefficient significantly increases from 3.66 × 10⁻⁴ C/m²/K at x = 0 to 8.04 × 10⁻⁴ C/m²/K at x = 0.02, making a great contribution to the superior pyroelectric energy harvesting. The output energy density in one cycle of the BNT-BA-0.02KNN is 23.32 μJ/cm³, which is twice as high as that of the pristine samples. The enhancement of material properties suggests that the pyroelectric energy harvesting can be efficiently optimized by the adequate control of the phase structure.     

Enhancement of pyroelectric properties of lead-free 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics by La doping

Lead-free 0.94NBT-0.06BT-xLa ceramics at x = 0.0–1.0 (%) were synthesized by a conventional solid-state route. XRD shows that the compositions are at a morphotropic phase boundary where rhombohedral and tetragonal phases coexist. With increasing La³⁺ content pyroelectric coefficient (p) and figures of merits greatly increase; however, the depolarization temperature (T_d) decreases. p is 7.24 × 10⁻⁴C m⁻² °C⁻¹ at RT at x = 0.5% and 105.4 × 10⁻⁴C.m^−2 °C⁻¹ at T_d at x = 0.2%. F_i and F_v show improvements at RT from 1.12 (x = 0%) to 2.65 (x10 ⁻¹⁰ m v⁻¹) (x = 0.5%) and from 0.021 to 0.048 (m².C⁻¹) respectively. F_i and F_v show a huge increase to 37.6 × 10⁻¹⁰ m v⁻¹ and 0.56 m² C⁻¹ respectively at T_d at x = 0.2%. F_C shows values of 2.10, 2.89, and 2.98 (x10⁻⁹C cm⁻² °C⁻¹) at RT at 33, 100 and 1000 (Hz) respectively. Giant pyroelectric properties make NBT-0.06BT-xLa at x = 0.2% and 0.5% promising materials for many pyroelectric applications.     

The decrease of depolarization temperature and the improvement of pyroelectric properties by doping Ta in lead-free 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics

Ta-doped lead-free 0.94NBT-0.06BT-xTa (x=0.0–1.0%) ceramics were synthesized by a conventional solid-state route. XRD shows that the compositions are at a morphotropic phase boundary where rhombohedral and tetragonal phases coexist. The depolarization temperature (T_d) shifted to lower temperature with the increase of Ta content. The pyroelectric coefficient (p) of doped ceramics greatly enhanced compared with undoped material and reached a maximum of 7.14×10⁻⁴ C m⁻² °C⁻¹ at room temperature (RT) and 146.1×10⁻⁴ C m⁻² °C⁻¹ at T_d at x=0.2%. The figure of merits, F_i and F_v, also showed a great improvement from 1.12×10⁻¹⁰ m v⁻¹ and 0.021 m² C⁻¹ at x=0.0 to 2.55×10⁻¹⁰ m v⁻¹ and 0.033 m² C⁻¹ at x=0.2% at RT. Furthermore, F_i and F_v show the huge improvement to 52.2×10⁻¹⁰ m v⁻¹ and 0.48×10⁻¹⁰ m v⁻¹ respectively at T_d at x=0.2%. F_C shows a value between 2.26 and 2.42 ×10⁻⁹ C cm⁻² °C⁻¹ at RT at x=0.2%. The improved pyroelectric properties make NBT-0.06BT-0.002Ta ceramics a promising infrared detector material.     

Relaxor Ferroelectric BaTiO3–Bi(Mg2/3Nb1/3)O3 Ceramics for Energy Storage Application

Perovskite solid solution ceramics of (1 ? x)BaTiO₃–xBi(Mg_2/3Nb_1/3)O₃ (BT–BMN) (x = 0.05–0.2) were synthesized by solid‐state reaction technique. The results show that the BMN addition could lower the sintering temperature of BT‐based ceramics. X‐ray diffraction results reveal a pure perovskite structure for all studied samples. Dielectric measurements exhibit a relaxor‐like characteristic for the BT–BMN ceramics, where broadened phase transition peaks change to a temperature‐stable permittivity plateau (from ?50°C to 300°C) with increasing the BMN content (x = 0.2), and slim polarization–electric field hysteresis loops were observed in samples with x ≥ 0.1. The dielectric breakdown strength and electrical resistivity of BT–BMN ceramics show their maxima of 287.7 kV/cm and 1.53 × 10¹³ Ω cm at x = 0.15, and an energy density of about 1.13 J/cm³ is achieved in the sample of x = 0.1.     

Negative thermal expansion coefficient of Sc-doped indium tungstate ceramics synthesized by co-precipitation

Co-precipitation was successfully applied to synthesize the Sc³⁺ doped In_2-xSc_x (WO₄)₃ (x = 0, 0.3, 0.6, 0.9 and 1.2) compounds. The composition- and temperature-induced structural phase transition and thermal expansion behaviors of Sc³⁺ doped In₂(WO₄)₃ were investigated. Results indicate that In_2-xSc_x (WO₄)₃ crystalizes in a monoclinic structure at 300 °C for x ≤ 0.3 and changes into hexagonal structure for x ≥ 0.6. Hexagonal In_1.1Sc_0.9(WO₄)₃ displays negative thermal expansion (NTE) with an average linear coefficient of thermal expansion (CTE) of −1.85 × 10⁻⁶ °C ⁻¹. After sintering at 700 °C and above, a phase transition from hexagonal to orthorhombic phase was observed in In_2-xSc_x (WO₄)₃ (x ≥ 0.6). Sc³⁺ doping successfully reduce the temperature-induced phase transition temperature of In_2-xSc_x (WO₄)₃ ceramics from 250 °C (x = 0) to room temperature (x = 0.9). When x = 0.9 and 1.2, the average linear CTEs of In_2-xSc_x (WO₄)₃ ceramics are −5.45 × 10⁻⁶ °C⁻¹ and -4.43 × 10⁻⁶ °C⁻¹ in a wider temperature range of 25–700 °C, respectively.     

Electrocaloric effect and pyroelectric energy harvesting of (0.94 − x)Na0.5Bi0.5TiO3-0.06BaTiO3-xSrTiO3 ceramics

Ceramics with the composition (0.94 − x)Na_0.5Bi_0.5TiO₃–0.06BaTiO₃–xSrTiO₃ (NBBSTx) where x = 0.10, 0.15, 0.20, and 0.25 were synthesized by a conventional solid-state reaction method to investigate their electrocaloric effect (ECE) and pyroelectric energy harvesting (PEH) properties. The ferroelectric, dielectric, and pyroelectric properties of the prepared ceramics were measured and discussed. It is found that the strontium titanate (ST) content and bias field greatly affect the ferroelectric–relaxor transition. Increasing ST content lowers the depolarization temperature of the ceramics, and both the ECE and PEH behavior of the ceramics strongly depend on their ST content because of the composition-induced decrease of the ferroelectric–relaxor transition temperature. The present investigation demonstrates that the ECE and PEH properties of NBBSTx ceramics can be tuned by introducing ST. Furthermore, a high PEH density of 425 kJ/m³ is obtained for NBBST0.20, which is much higher than those of conventional Pb-based ferroelectrics.     

A new type of Sr(Zr0.2Hf0.2Ce0.2Yb0.2Me0.2)O3−x (Me = Y,Gd) high-entropy ceramics used in thermal barrier coatings

Seeking for new ceramics with excellent thermophysical properties as thermal barrier coatings candidate materials has become a hot research field. In this study, Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x high-entropy ceramic powders were successfully synthesized by the method of solid-state reaction, and the ceramics with single phase were prepared by pressureless sintering at 1600°C. The phase composition, microstructure, element distribution, high-temperature thermal stability, and thermophysical properties of the ceramics were studied. The results showed that Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x ceramics were composed of SrZrO₃ phase and the second phase of AB₂O₄ spinel (i.e., SrY₂O₄ and SrGd₂O₄). The content of the second phase was gradually increased after heat treatment at 1400°C, which significantly improved the thermophysical and mechanical properties of the ceramics. The microhardness and fracture toughness of the ceramics were improved compared with that of SrZrO₃. The thermal conductivities of Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x (Me = Y, Gd) ceramics were 1.30 and 1.28 W m⁻¹ K⁻¹ at 1000°C, which were about 35% and 40% lower than that of SrZrO₃ (1.96 W m⁻¹ K⁻¹) and yttria-stabilized zirconia (2.12 W m⁻¹ K⁻¹), respectively. The thermal expansion coefficients of Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x (Me = Y, Gd) ceramics were 12.8 × 10⁻⁶ and 14.1 × 10⁻⁶ K⁻¹ at 1300°C, respectively, which was more closer to the superalloys compared with SrZrO₃ ceramic (11.0 × 10⁻⁶ K⁻¹).     

Structural and Dielectric Properties in (1−x)BaTiO3–xBi(Mg1/2Ti1/2)O3 Ceramics (0.1 ≤ x ≤ 0.5) and Potential for High‐Voltage Multilayer Capacitors

Structural and dielectric properties of (1?x)BaTiO₃–xBi(Mg_1/2Ti_1/2)O₃ (x = 0.1–0.5) were investigated to understand the binary system and utilize it for high‐voltage, high energy density capacitors. The solubility limit for Bi(Mg_1/2Ti_1/2)O₃ in a BaTiO₃ perovskite was between x = 0.4 and x = 0.5. A phase with pseudocubic symmetry was formed for x = 0.1–0.4; a secondary phase developed at x = 0.5. Dielectric measurements showed highly diffusive and dispersive relaxor‐like characteristics from 10 to 40 mol% of Bi(Mg_1/2Ti_1/2)O₃. These compositions also showed high relative permittivity with low‐temperature coefficients of permittivity over a wide range of temperatures ?100°C–600°C. Relaxation behavior was quantitatively investigated using the Vogel–Fulcher model, which revealed the activation energy of 0.17–0.22 eV. Prototyped multilayer capacitors of 18 mm × 17 mm × 4 mm dimensions with a capacitance of 12.5 nF at 1 kHz were successfully constructed and demonstrated multiple charge–discharge characteristics up to 10 kV.     

Induced anisotropic behavior and enhanced electrical properties on hot-pressed strontium barium niobate ceramics

Sr_0.30Ba_0.70Nb₂O₆ (SBN30) ferroelectric ceramics were fabricated by conventional sintering (CS) and by hot-pressing sintering (HP) and their crystal structure, microstructure, dielectric, ferroelectric and pyroelectric properties were studied and compared. Preferred orientation of the HP ceramics was detected through X-ray diffraction. Dense microstructure virtually free of pores has been achieved in HP samples. Moreover, the HP samples manifested prominent anisotropy in electrical properties. Besides, the relative permittivity (ε_r), saturated polarization (P_s), pyroelectric coefficient (p) in the direction perpendicular to the pressing axis were much higher than those of the randomly oriented CS samples. The HP samples sintered under 200 MPa show excellent pyroelectric properties in the direction perpendicular to the pressing axis, with pyroelectric coefficient of 2.38×10⁻⁸C/cm²K and pyroelectric figure of merit of F_i=1.13 pm/V, F_v=1.89 m²/C and F_d=0.63 μPa^−1/2,which roughly triple the values obtained in CS samples. These results indicate that hot-pressing is a viable option for accessing single-crystal-like anisotropy as well as enhanced electrical properties in polycrystalline ceramics, thus unveiling the distinctive potential of HP SBN30 ceramics for infrared detector applications.     

Enhanced electrocaloric response and energy storage performance of Li-substituted BaTiO3 ceramics

Recently, ferroelectric and antiferroelectric ceramic materials have gained a lot of interest for the development of environment-friendly highly-efficient electrocaloric refrigeration and energy-storage devices. In this work, lead-free Ba_1−xLi_xTiO₃ ceramics with x = 0, 0.01, 0.02, 0.03, 0.04, and 0.05 were synthesized by the conventional solid-state reaction method, and the effect of Li doping on dielectric, leakage current, ferroelectric, electrocaloric, and energy storage properties of BaTiO₃ ceramics was systematically investigated. The XRD and Raman studies confirmed that the structure of Ba_1−xLi_xTiO₃ remains tetragonal as for BaTiO₃. The Li substitution shifted the phase transition (T_C) of BaTiO₃ slightly towards the lower temperature side. Significant drop in leakage current was observed with an addition of Li content. The maximum values of the electrocaloric effect (ΔT), electrocaloric responsivity, and coefficient of performance were found to be 1.44 K, 0.24 × 10⁻⁶ K m/V, and 5.75, respectively, for x = 0.04 at an applied field of 60 kV/cm near the Curie temperature. The maximal value of energy storage density was found to be 0.42 J/cm³ with an energy storage efficiency of 60% for x = 0.05. Our results suggested that lead-free Ba_1−xLi_xTiO₃ ceramic material is a promising candidate for potential applications in solid-state refrigeration technology and high-efficiency energy storage devices.     

Potentiality of Bi and Mn co-doped lead-free NaNbO3 ceramics as a pyroelectric material for uncooled infrared thermal detectors

The pyroelectric materials have immense applications in the uncooled infrared thermal detectors. However, owing to increasing environmental concerns due to Pb element, it is required to explore novel, high-performance, environmental-friendly pyroelectric materials. This is the first study to report about the pyroelectric properties of lead-free NaNbO₃ ceramics, which displayed a high pyroelectric coefficient of 1.85 × 10^?8 C cm^-2 K^?1 and figures of merit as F_i = 0.67 × 10^?10 m V^?1, F_v = 3.33 × 10^?2 m² C^?1, and F_d = 5.32 × 10^-5 Pa^?1/2 at room temperature. Also, highly temperature-stable pyroelectric characteristics were also observed in NaNbO₃ ceramics due to the high depolarization temperature of 280 ℃. The high pyroelectric properties and temperature stability were a result of the electric field induced irreversible phase transition from antiferroelectric to ferroelectric. Hence, we can conclude that lead-free NaNbO₃ ceramics are a novel and promising candidate for pyroelectric detectors in a wide temperature range, especially for large area detectors and pyroelectric point detector.     

Enhanced electrocaloric,pyroelectric and energy storage performance of BaCexTi1−xO3 ceramics

BaCe_xTi_1−xO₃ (BCT) ceramics with compositions x = 0, 0.1, 0.12 and 0.15 were synthesized using conventional solid state reaction route. Systematic exploration of enhancing electrocaloric effect (ECE) in BaTiO₃ by rare earth dopant Ce is presented. BaCe_0.12Ti_0.88O₃ exhibited an electrocaloric strength of ∼0.35 K m/MV at 351 K, which caters the need for a series of high-level ECE material. Further, the temperature dependence of pyroelectric coefficient is established for all compositions. The pyroelectric figure of merits (FOMs) for current responsivity (F_i), voltage responsivity (F_v), detectivity (F_d) and energy harvesting (F_e and F_e^*) are calculated and the results reveal that x = 0.1 could be a technologically superior candidate for pyroelectric devices. Further, BaCe_0.15Ti_0.85O₃ exhibited highest electrical energy storage performance of 115 kJ/m³ compared with 71 kJ/m³ in BaTiO₃. Our findings in this work may provide a better understanding for developing high ECE materials combined with pyroelectric and energy storage performance of Ce substituted BaTiO₃ ceramics.