Single phased Sr<Subscript>3</Subscript>La(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript>/Mn<Superscript>2+</Superscript> phosphors: solid state synthesis,tunable luminescence and potential applications in white light LEDs

A series of Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors were synthesized by a solid state reaction. The phase and the optical properties of the synthesized phosphors were investigated. The XRD results indicate that the doped Eu²⁺ and Mn²⁺ ions do not change the phase of Sr₃La(PO₄)₃. The peak wavelengths of Eu²⁺ single doped and Eu²⁺/Mn²⁺ codoped Sr₃La(PO₄)₃ phosphors shift to longer wavelength due to the larger crystal field splitting for Eu²⁺ and Mn²⁺. The increases of crystal field splitting for Eu²⁺ and Mn²⁺ are induced by the substitution of Sr²⁺ by Eu²⁺ and Mn²⁺ in Sr₃La(PO₄)₃ host. Due to energy transfer from Eu²⁺ to Mn²⁺ in Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors, tunable luminescence was obtained by changing the concentration of Mn²⁺. And the white light was emitted by Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/4.0 mol%Mn²⁺ and Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/5.0 mol%Mn²⁺ phosphors.     

Recombination luminescence of CaI<Subscript>2</Subscript> crystals activated with Eu<Superscript>2+</Superscript>, Gd<Superscript>2+</Superscript>, Tl<Superscript>+</Superscript>, Pb<Superscript>2+</Superscript>, and Mn<Superscript>2+</Superscript>

The spectral characteristics of thermostimulated luminescence, steady-state roentgenoluminescence and photostimulated luminescence (PSL) buildup and decay kinetics, and the effect of IR irradiation on the roentgenoluminescence yield and glow curves of CaI₂:Eu²⁺, CaI₂:Gd²⁺, CaI₂:Tl⁺, CaI₂:Pb²⁺, CaI₂:Mn²⁺, and CaI₂: Pb²⁺, Mn²⁺ crystals grown by the Bridgman-Stockbarger method have been studied in the temperature range 90–295 K. Coupled with earlier data, the present results on the influence of oxygen and hydrogen impurities on the spectral characteristics of CaI₂ indicate that the activation of calcium iodide with Eu²⁺, Gd²⁺, Tl⁺, Pb²⁺, and Mn²⁺ leads to the formation of cation impurity-native defect complexes, which act as carrier traps and are responsible for the thermostimulated luminescence in the range 150–295 K. IR exposure after 90-K x-ray excitation gives rise to flash PSL and influences the thermostimulated luminescence light sum. The nature of the emission and trapping centers involved and the mechanisms of recombination luminescence excitation in the crystals are discussed.     

Influence of Mn<Superscript>2+</Superscript> on the up-conversion emission performance of Mn<Superscript>2+</Superscript>, Yb<Superscript>3+</Superscript>, Er<Superscript>3+</Superscript>: ZnWO<Subscript>4</Subscript> green phosphors

The Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors are synthesized successfully through the high temperature solid state reaction method. The micro-structure and morphology have been investigated by means of XRD and EDS. The doped concentrations of Mn²⁺, Yb³⁺, Er³⁺ are measured by ICP. The absorption spectra and emission spectra with different doped concentrations of Mn²⁺ are presented to reveal the influence of Mn²⁺ on the green up-conversion performance. Excited with 970 nm LED, the up-conversion emission peak at 547 nm is obtained and the CIE spectra as well as the green light photo are also presented. The results indicate that the Mn²⁺ ions play the role of the luminescence adjustment in the up-conversion process, which can improve the up-conversion green emission intensity effectively. The luminescence adjustment mechanism of Mn²⁺ ions in Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors has been discussed. The crystal parameters of Dq, B and C are calculated to evaluate the energy level split effect.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

General strategy for embedding high quality Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> quantum dots and ZnS:Mn<Superscript>2+</Superscript> quantum dots in a silica matrix

In this paper, ZnS:Mn²⁺ quantum dots (QDs) Fe₃O₄ quantum dots (QDs)/SiO₂ nanocomposites were successfully synthesized by reverse microemulsion method. The average diameter of ZnS:Mn²⁺ QDs, Fe₃O₄ QDs and ZnS:Mn²⁺ QDs Fe₃O₄ QDs/SiO₂ nanocomposites was about 5.8, 9 and 29 nm, respectively. As the mass ratio of ZnS:Mn²⁺ to Fe₃O₄ QDs increased from 2.5:4 to 7.5:4, the intensity of the yellow–orange emission coming from Mn²⁺ ions was increased. The superparamagnetic property of ZnS:Mn²⁺ QDs Fe₃O₄ QDs/SiO₂ nanocomposites was observed at room temperature, and the saturation magnetization was decreased as the amount of ZnS:Mn²⁺ QDs increased.     

Effect of co-doped Tb<Superscript>3+</Superscript> ions on electroluminescence of ZnO:Eu<Superscript>3+</Superscript> LED

Rare earth (RE) -doped ZnO electroluminescence is worthy of investigation for phosphor-free white light-emitting diodes (LEDs) due to their pure and sharp emissions. Whereas, the low solubility of RE ions in ZnO films is found to hinder the performance of RE-doped ZnO devices. Herein, ZnO:Eu and ZnO:Eu/Tb LEDs were synthesized and the electroluminescence properties were tested. The results show that the emission intensity of ZnO: Eu/Tb LED is 8 times higher than that of ZnO: Eu LED while the input power is smaller when the concentration of terbium is proper. Furthermore, we discussed the excitation mechanism and found that the ratio of the EL intensity of the ⁵D₁ → ⁷F₁ to ⁵D₀ → ⁷F_{J (J=0???4)} transition increases with increasing Tb doping concentration, which may indicate the possibility of energy transfer from Tb³⁺ to Eu³⁺. The results are believed to be an effective strategy to improve the electroluminescence of RE-doped semiconductor for white LEDs.     

Persistent luminescence of Zn<Subscript>2</Subscript>GeO<Subscript>4</Subscript>:Mn<Superscript>2+</Superscript>/Pr<Superscript>3+</Superscript> phosphors

Zn₂GeO₄, Zn₂GeO₄:Mn²⁺, Zn₂GeO₄:Pr³⁺ and Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors were fabricated by a solid state reaction. The phase and luminescent properties of the fabricated phosphors were investigated. The XRD patterns show that all of the fabricated phosphors have an orthorhombic structure. The fabricated Zn₂GeO₄ shows an emission band in the range of 350–550 nm. The fabricated Zn₂GeO₄:Mn²⁺ and Zn₂GeO₄:Pr³⁺ phosphors show emission bands corresponding to Mn²⁺ and Pr³⁺ ions, respectively. The fabricated Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor shows the emission band results from Mn²⁺ and the codoped Pr³⁺ enhances the emission intensity of Mn²⁺. Moreover, Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor exhibits longer decay time than that of Zn₂GeO₄:Mn²⁺. The higher intensity and longer lifetime of Mn²⁺ emission are induced by the energy transfer from Pr³⁺ of various vacancies to Mn²⁺ in Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors.     

Enhanced red-emitting phosphor Na<Subscript>2</Subscript>Ca<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>:Eu<Superscript>3+</Superscript> by charge compensation

A series of novel red-emitting Na₂Ca_3???x Si₂O₈:xEu³⁺ phosphors were synthesized by solid state reactions. The phosphors can strongly absorb 395 nm light, and show red emission with a good color purity. The excitation and emission spectra properties of Na₂Ca₃Si₂O₈:Eu³⁺ were characterized. Na₂Ca₃Si₂O₈:Eu³⁺ with self-compensated and alkali metal ions charge compensated approaches (2Ca²⁺→Eu³⁺ + M⁺, M?=?Li⁺, Na⁺, K⁺) have investigated, which found that the red emission of luminescent intensity can be greatly enhanced, and shows superior luminescent property to the commercial Y₂0₃S:Eu³⁺. The present work implies that the efficient charge compensated phosphors are promising candidates as red-emitting phosphor for w-LEDs.     

Luminescent properties of Pb<Superscript>2+</Superscript>- and Mn<Superscript>2+</Superscript>-activated CdI<Subscript>2</Subscript> crystals

The luminescent properties of CdI₂, CdI₂:Pb²⁺, CdI₂:Mn²⁺, and CdI₂:Pb²⁺,Mn²⁺) crystals have been studied at temperatures from 85 to 295 K under optical and x-ray excitation. Analysis of new and earlier spectroscopic data suggests that the 560-nm luminescence of CdI₂:Pb²⁺ and CdI₂:(Pb²⁺,Mn²⁺) crystals under excitation on the long-wavelength component of the A absorption band of Pb²⁺ centers is due to Pb²⁺-bound anion excitons. The 640-to 660-nm emission of these crystals is attributable to α centers. The manganese luminescence in the codoped material originates from both intracenter Mn²⁺ excitations and a sensitized process due to energy transfer from the host and Pb²⁺-related centers. The mechanisms of recombination and energy transfer processes in cadmium iodide crystals codoped with Pb²⁺ and Mn²⁺ are discussed.     

Hydrothermal synthesis of NaLa(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>3+</Superscript> octahedrons and tunable luminescence by changing Eu<Superscript>3+</Superscript> concentration and excitation wavelength

NaLa(WO₄)₂:Eu³⁺ phosphors with different Eu³⁺ concentrations have been synthesized by a hydrothermal method. The phase is confirmed by XRD analysis, which shows a pure-phase NaLa(WO₄)₂ XRD pattern for all of NaLa(WO₄)₂:Eu³⁺ phosphors. The SEM and TEM images indicate that all of NaLa(WO₄)₂:Eu³⁺ phosphors have a octahedral morphology. These suggest that the Eu³⁺ doping has no influence on the structure and growth of NaLa(WO₄)₄ particles. By monitoring the emission of Eu³⁺ at 615 nm, NaLa(WO₄)₂:Eu³⁺ phosphors show excitation bands originating from both host and Eu³⁺ ions. Under the excitation at 271 nm corresponding to WO₄ ^2? groups, emission bands coming from the ¹A₁ → ³T₁ transition with the WO₄ ^2? groups and the ⁵D₀ → ⁷F_j (j = 0, 1, 2, 3 and 4) transitions of Eu³⁺ are observed. The emission intensity relating to WO₄ ^2? groups decreases with increasing Eu³⁺ concentration. But emission intensities of Eu³⁺ increase firstly and then decreases because of concentration quenching effect. Under the excitation at 395 nm corresponding to ⁷F₀ → ⁵L₆ transition of Eu³⁺, only characteristic Eu³⁺ emission bands can be observed. The results of this work suggest that tunable luminescence can be obtained for Eu³⁺ doped NaLa(WO₄)₂ phosphors by changing Eu³⁺ concentration and excitation wavelength.     

Roles of doping ions in persistent luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, RE<Superscript>3+</Superscript> phosphors

The polycrystalline Eu²⁺ and RE³⁺ co-doped strontium aluminates SrAl₂O₄:Eu²⁺, RE³⁺ were prepared by solid state reactions. The UV-excited photoluminescence, persistent luminescence and thermo-luminescence of the SrAl₂O₄:Eu²⁺, RE³⁺ phosphors with different composition and doping ions were studied and compared. The results showed that the doped Eu²⁺ ion in SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors works as not only the UV-excited luminescent center but also the persistent luminescent center. The doped Dy³⁺ ion can hardly yield any luminescence under UV-excitation, but can form a electron trap with appropriate depth and greatly enhance the persistent luminescence and thermo-luminescence of SrAl₂O₄:Eu²⁺. Different co-doping RE³⁺ ions showed different effects on persistent luminescence. Only the RE³⁺ ion (e.g. Dy³⁺, Nd³⁺), which has a suitable optical electro-negativity, can form the appropriate electron trap and greatly improve the persistent luminescence of SrAl₂O₄:Eu²⁺. Based on above observations, a persistent luminescence mechanism, electron transfer model, was proposed and illustrated.     

Synthesis and photoluminescence properties of Eu<Superscript>3+</Superscript>-activated SrZnO<Subscript>2</Subscript>

Synthesis, X-ray diffraction, and photoluminescence (PL) investigations of SrZnO₂ doped with Eu³⁺ were carried out in order to characterize the material. The emission spectra showed a broad band emission at 525 nm attributed to oxygen defect centers in the host matrix, along with peaks corresponding to the ⁵D₀ → ⁷F _j (j = 1, 2) transitions of Eu ion under 250 nm excitation. PL decay time studies were done to confirm these investigations. Time-resolved emission spectrometric (TRES) study was carried out to extract the emission spectra of the Eu ion which was buried under the broad band emission. After giving suitable delay times and by choosing a proper time gate, transitions due to ⁵D₀ → ⁷F _j (j = 0, 1, 2, 3, and 4) could be observed. Judd–Ofelt intensity parameters and other radiative properties for the system were evaluated from this emission spectrum and decay time data by adopting standard procedure. The color coordinates of the system were also evaluated and plotted on a standard CIE index diagram. The observations showed that the SrZnO₂:Eu³⁺material has near white light emission (also considering the emission from host) whereas, the extracted emission spectrum due to only Eu ions has a near red emission.     

Rapid synthesis and enhancement in down conversion emission properties of BaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>,RE<Superscript>3+</Superscript> (RE<Superscript>3+</Superscript>=Y,Pr) nanophosphors

BaAl₂O₄:Eu²⁺,RE³⁺ (RE³⁺=Y, Pr) down conversion nanophosphors were prepared at 600 °C by a rapid gel combustion technique in presence of air using boron as flux and urea as a fuel. A comparative study of the prepared materials was carried out with and without the addition of boric acid. The boric acid was playing the important role of flux and reducer simultaneously. The peaks available in the XPS spectra of BaAl₂O₄:Eu²⁺ at 1126.5 and 1154.8 eV was ascribed to Eu²⁺(3d _5/2) and Eu²⁺(3d _3/2) respectively which confirmed the presence of Eu²⁺ ion in the prepared lattice. Morphology of phosphors was characterized by tunneling electron microscopy. XRD patterns revealed a dominant phase characteristics of hexagonal BaAl₂O₄ compound and the presence of dopants having unrecognizable effects on basic crystal structure of BaAl₂O₄. The addition of boric acid showed a remarkable change in luminescence properties and crystal size of nanophosphors. The emission spectra of phosphors had a broad band with maximum at 490–495 nm due to electron transition from 4f ⁶5d ¹ → 4f ⁷ of Eu²⁺ ion. The codoping of the rare earth (RE³⁺=Y, Pr) ions help in the enhancement of their luminescent properties. The prepared phosphors had brilliant optoelectronic properties that can be properly used for solid state display device applications.     

Optical properties of Eu<Superscript>3+</Superscript> activated SrLa<Subscript>2</Subscript>O<Subscript>4</Subscript> red-emitting phosphors for WLED applications

The SrLa_2?xO₄:xEu³⁺ phosphors are synthesized through high-temperature solid-state reaction method at 1473 K with various doping concentration. Their phase structures, absorption spectra, and luminescence properties are investigated by X-ray diffraction (XRD), UV–Vis spectrophotometer and photoluminescence spectrometry. The intense absorption of SrLa_2?xO₄:xEu³⁺ phosphors have occurred around 400 nm. The prominent luminescence spectra of the prepared phosphors exhibited bright red emission at 626 nm. The doping concentration 0.12 mol% of Eu³⁺ is shown to be optimal for prominent red emission and chromaticity coordinates are x?=?0.692, y?=?0.3072. Considering the high colour purity and appropriate emission intensity of Eu³⁺ doped SrLa₂O₄ can be used as red phosphors for white light emitting diodes (WLEDs).     

Synthesis,structure and photoluminescence properties of (Sr,Ca)AlSiN<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript> phosphor for white light emitting diodes with controllable optical performance

A series of Sr_yCa_1?x?yAlSiN₃:xEu²⁺ (x = 0–0.01, y = 0–0.8) phosphors have been successfully prepared by solid state reaction under atmospheric pressure. All the phosphors exhibit orthorhombic crystal structure similar with CaAlSiN₃ structure. It is found that the emission bands for all Ca_1?xAlSiN₃:xEu²⁺ phosphors are centered at ~650 nm and fluorescence quenching has been observed along with the increase of Eu²⁺ concentration in host materials. Through substitution of Ca²⁺ by Sr²⁺, an expected red emission peak (625 nm) and enhanced luminescent intensity can be achieved. The obtained Sr_0.8Ca_0.192AlSiN₃:0.008Eu²⁺ phosphor was further used as efficient red component to fabricate white light emitting diodes (LEDs). Under the optimized condition of LED packaging, the white LEDs own the excellent optical properties with luminous efficiency of 90.6 lm/W and an ideal color rendering index (Ra = 82). Furthermore, the color correlated temperature of white LEDs can be simply adjusted through changing the red phosphor concentration and dispensing package saves time.     

Luminescence properties of monodispersed spherical BaWO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> microphosphors for white light-emitting diodes

Monodispersed spheres (1–4 μm in diameter) of BaWO₄:Eu³⁺ (hereafter BWO:Eu) red-phosphor exhibiting intense emission at 615 nm were synthesized via a mild hydrothermal method. X-ray diffraction, scanning electron microscope, photoluminescence excitation and emission spectra, and decay curve were used to characterize the properties of BWO:Eu phosphors. An intense red emission was obtained by exciting either into the ⁵L₆ state with 394 nm or the ⁵D₂ state with 465 nm, that correspond to two popular emission lines from near-UV and blue LED chips, respectively. The values of Ω _2,4 experimental intensity parameters (13.8 × 10⁻²⁰ and 8.2 × 10⁻²⁰ cm²) are determined. The high-emission quantum efficiency of the BWO:Eu phosphor suggests this material could be promising red phosphors for generating white light in phosphor-converted white light-emitting diodes.     

Synthesis and luminescence properties of a novel Eu<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript> co-doped Al<Subscript>18</Subscript>B<Subscript>4</Subscript>O<Subscript>33</Subscript> whiskers by a gel nano-coating method

Al₁₈B₄O₃₃:Eu³⁺, Tb³⁺ whiskers have been successfully prepared by a simple gel nano-coating method using aluminum isopropoxide as the starting materials. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), and thermogravimetric analysis (TGA) were used characterize the samples. The results show coexistence of the crystal phase Al₁₈B₄O₃₃, amorphous phase, and Eu³⁺, Tb³⁺ ions of the samples with initial addition Al/B ratios from 3 to 1 are incorporated into the amorphous phase. The Al₁₈B₄O₃₃:Eu³⁺, Tb³⁺ whiskers are very straight with an average diameter of 600 nm and lengths ranging from 5 to 10 μm. Under ultraviolet excitation at 365 nm, samples show mainly exhibit the characteristic emission of Eu³⁺ corresponding to \( ^{ 5} {\text{D}}_{ 0} \to {\text{F}}_{ 1 , 2} \) transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺.     

Comparative investigation on the effect of alkaline earth oxides on the intensity of absorption bands due to Cu<Superscript>2+</Superscript>, Mn<Superscript>3+</Superscript> and Cr<Superscript>3+</Superscript> ions in ternary silicate glasses

Absorption characteristics of Cu²⁺, Mn³⁺ and Cr³⁺ ions in ternary silicate (20Na₂O·10RO·70SiO₂, where R=Ca, Sr, Ba) glasses were investigated. The intensities of absorption bands due to Cu²⁺ ion was found to increase with increasing ionic radii of the alkaline earth ions whereas it was found to decrease in case of Mn³⁺ and Cr³⁺ ions with increasing ionic radii of the alkaline earth ions. The results were discussed in the light of relation between linear extinction coefficients of these ions and coulombic force of alkaline earth ions. The change in intensities of Cu²⁺, Mn³⁺ and Cr³⁺ ion is attributed due to change in silicate glass compositions.     

Effect of precursor morphology on the structural properties,optical absorption,and luminescence of BaI<Subscript>2</Subscript>:Eu<Superscript>2+</Superscript>,Eu<Superscript>3+</Superscript>

BaI₂:Eu²⁺,Eu³⁺ powders have been prepared by heat-treating BaCO₃:Eu³⁺ precursor powders of various morphologies in an iodinating agent atmosphere and their structural properties, morphology, optical absorption, and luminescence have been studied. The results demonstrate that the powders thus prepared consist of a mixture of crystalline hydrates of various compositions, dominated by BaI₂ ? 2Н₂О (sp. gr. C2/c), and that the Eu²⁺: Eu³⁺ ratio in the powders is determined by the morphology of the precursor.     

Synthesis and luminescence properties of Eu2+- and Mn2+-activated Mg21Ca4Na4(PO4)18 phosphors

Rare earth-doped phosphates have attracted much attention in recent years because of their interesting optical applications. However, few studies have reported on optical properties of fillowite-like compounds. Eu²⁺ and Mn²⁺ singly doped and Eu²⁺/Mn²⁺-codoped Mg₂₁Ca₄Na₄(PO₄)₁₈ phosphors were synthesized for the first time via combustion-assisted synthesis technique. The Eu²⁺-activated sample emits an intense blue light under 360 nm excitation, while the Eu²⁺/Mn² + -codoped Mg₂₁Ca₄Na₄(PO₄)₁₈ sample exhibits a broad blue emission band and a red emission band, resulting from Eu²⁺ and Mn²⁺, respectively. Energy transfer between Eu²⁺ and Mn²⁺ was discovered and the transfer efficiency was also estimated based on relative intensities of Eu²⁺ and Mn²⁺ emission. Thus, the relative strength of blue and red emission intensities could be tuned by varying the relative concentration of Eu²⁺ and Mn²⁺. Since the photoluminescence excitation spectra of the newly developed Mg₂₁Ca₄Na₄(PO₄)₁₈:Eu²⁺, Mn²⁺ phosphors exhibit a strong absorption in the range of 250–400 nm, they are promising for producing UV-LED-based white LEDs.