Spatial Collection in Colloidal Quantum Dot Solar Cells

In thin‐film photovoltaic (PV) research and development, it is of interest to determine where the chief losses are occurring within the active layer. Herein, a method is developed and presented by which the spatial distribution of charge collection, operando, is ascertained, and its application in colloidal quantum dot (CQD) solar cells is demonstrated at a wide range of relevant bias conditions. A systematic computational method that relies only on knowledge of measured optical parameters and bias‐dependent external quantum efficiency spectra is implemented. It is found that, in CQD PV devices, the region near the thiol‐treated hole‐transport layer suffers from low collection efficiency, as a result of bad band alignment at this interface. The active layer is not fully depleted at short‐circuit conditions, and this accounts for the limited short‐circuit current of these CQD solar cells. The high collection efficiency outside of the depleted region agrees with a diffusion length on the order of hundreds of nanometers. The method provides a quantitative tool to study the operating principles and the physical origins of losses in CQD solar cells, and can be deployed in thin‐film solar cell device architectures based on perovskites, organics, CQDs, and combinations of these materials.     

Realistic Detailed Balance Study of the Quantum Efficiency of Quantum Dot Solar Cells

An attractive but challenging technology for high efficiency solar energy conversion is the intermediate band solar cell (IBSC), whose theoretical efficiency limit is 63%, yet which has so far failed to yield high efficiencies in practice. The most advanced IBSC technology is that based on quantum dots (QDs): the QD‐IBSC. In this paper, k·p calculations of photon absorption in the QDs are combined with a multi‐level detailed balance model. The model has been used to reproduce the measured quantum efficiency of a real QD‐IBSC and its temperature dependence. This allows the analysis of individual sub‐bandgap transition currents, which has as yet not been possible experimentally, yielding a deeper understanding of the failure of current QD‐IBSCs. Based on the agreement with experimental data, the model is believed to be realistic enough to evaluate future QD‐IBSC proposals.     

Multiphoton Absorption Stimulated Metal Chalcogenide Quantum Dot Solar Cells under Ambient and Concentrated Irradiance

Colloidal metal chalcogenide quantum dots (QDs) have excellent quantum efficiency in light–matter interactions and good device stability. However, QDs have been brought to the forefront as viable building blocks in bottom‐up assembling semiconductor devices, the development of QD solar cell (QDSC) is still confronting considerable challenges compared to other QD technologies due to their low performance under natural sunlight, as a consequence of untapped potential from their quantized density‐of‐state and inorganic natures. This report is designed to address this long‐standing challenge by accessing the feasibility of using QDSC for indoor and concentration PV (CPV) applications. This work finds that above bandgap photon energy irradiation of QD solids can generate high densities of excitons via multi‐photon absorption (MPA), and these excitons are not limited to diffuse by Auger recombination up to 1.5 × 10¹⁹ cm^?3 densities. Based on these findings, a 19.5% (2000 lux indoor light) and an 11.6% efficiency (1.5 Suns) have been facilely realized from ordinary QDSCs (9.55% under 1 Sun). To further illustrate the potential of the MPA in QDSCs, 21.29% efficiency polymer lens CPVs (4.08 Suns) and viable sensor networks powered by indoor QDSCs matrix have been demonstrated.     

Hybrid Perovskite Quantum Dot/Non-Fullerene Molecule Solar Cells with Efficiency Over 15%

Organic-inorganic hybrid film using conjugated materials and quantum dots (QDs) are of great interest for solution-processed optoelectronic devices, including photovoltaics (PVs). However, it is still challenging to fabricate conductive hybrid films to maximize their PV performance. Herein, for the first time, superior PV performance of hybrid solar cells consisting of CsPbI₃ perovskite QDs and Y6 series non-fullerene molecules is demonstrated and further highlights their importance on hybrid device design. In specific, a hybrid active layer is developed using CsPbI₃ QDs and non-fullerene molecules, enabling a type-II energy alignment for efficient charge transfer and extraction. Additionally, the non-fullerene molecules can well passivate the QDs, reducing surface defects and energetic disorder. The champion CsPbI₃ QD/Y6-F hybrid device has a record-high efficiency of 15.05% for QD/organic hybrid PV devices, paving a new way to construct solution-processable hybrid film for efficient optoelectronic devices.     

Fine Tuned Nanolayered Metal/Metal Oxide Electrode for Semitransparent Colloidal Quantum Dot Solar Cells

Semitransparent photovoltaics have great potential, for example, in building‐integration or in portable electronics. However, the front and back contact electrodes significantly affect the light transmission and photovoltaic performance of the complete device. Herein, the use of a semitransparent nanolayered metal/metal oxide electrode for a semitransparent PbS colloidal quantum dot solar cell to increase the light transmission and power conversion efficiency is reported. The effect of the nanolayered electrode on the optical properties within the solar cells is studied and compared to a theoretically model to identify the origin of optical losses that lower the device transmission. The results show that the light transmission in the visible region and the photovoltaic performance are significantly enhanced with the nanolayered electrode. The solar cell shows an efficiency of 5.4% and average visible transmittance of 24.1%, which is an increase by 28.6% and 59.6%, respectively, compared to the device with a standard Au film as the electrode. These results demonstrate that the optical and electrical modification of transparent electrode is possible and essential for reducing the light reflection and absorption of the electrode in semitransparent photovoltaics, and, meanwhile the demonstrated nanolayered materials may provide an avenue for enhancing the device transparency and efficiency.     

High Performance PbS Colloidal Quantum Dot Solar Cells by Employing Solution‐Processed CdS Thin Films from a Single‐Source Precursor as the Electron Transport Layer

CdS thin films are a promising electron transport layer in PbS colloidal quantum dot (CQD) photovoltaic devices. Some traditional deposition techniques, such as chemical bath deposition and RF (radio frequency) magnetron sputtering, have been employed to fabricate CdS films and CdS/PbS CQD heterojunction photovoltaic devices. However, their power conversion efficiencies (PCEs) are moderate compared with ZnO/PbS and TiO₂/PbS heterojunction CQD solar cells. Here, efficiencies have been improved substantially by employing solution‐processed CdS thin films from a single‐source precursor. The CdS film is deposited by a straightforward spin‐coating and annealing process, which is a simple, low‐cost, and high‐material‐usage fabrication process compared to chemical bath deposition and RF magnetron sputtering. The best CdS/PbS CQD heterojunction solar cell is fabricated using an optimized deposition and air‐annealing process achieved over 8% PCE, demonstrating the great potential of CdS thin films fabricated by the single‐source precursor for PbS CQDs solar cells.     

Spray‐Coated Colloidal Perovskite Quantum Dot Films for Highly Efficient Solar Cells

A fully automated spray‐coated technology with ultrathin‐film purification is exploited for the commercial large‐scale solution‐based processing of colloidal inorganic perovskite CsPbI₃ quantum dot (QD) films toward solar cells. This process is in the air outside the glove box. To further improve the performance of QD solar cells, the short‐chain ligand of phenyltrimethylammonium bromide (PTABr) with a benzene group is introduced to partially substitute for the original long‐chain ligands of the colloidal QD surface (namely PTABr‐CsPbI₃). This process not only enhances the carrier charge mobility within the QD film due to shortening length between adjacent QDs, but also passivates the halide vacancy defects of QD by Br^? from PTABr. The colloidal QD solar cells show a power conversion efficiency (PCE) of 11.2% with an open voltage of 1.11 V, a short current density of 14.4 mA cm^?2, and a fill factor of 0.70. Due to the hydrophobic surface chemistry of the PTABr–CsPbI₃ film, the solar cell can maintain 80% of the initial PCE in ambient conditions for one month without any encapsulation. Such a low‐cost and efficient spray‐coating technology also offers an avenue to the film fabrication of colloidal nanocrystals for electronic devices.     

Efficient Infrared Solar Cells Employing Quantum Dot Solids with Strong Inter-Dot Coupling and Efficient Passivation

Lead chalcogenide quantum dot (QD) infrared (IR) solar cells are promising devices for breaking through the theoretical efficiency limit of single-junction solar cells by harvesting the low-energy IR photons that cannot be utilized by common devices. However, the device performance of QD IR photovoltaic is limited by the restrictive relation between open-circuit voltages (V_OC) and short circuit current densities (J_SC), caused by the contradiction between surface passivation and electronic coupling of QD solids. Here, a strategy is developed to decouple this restriction via epitaxially coating a thin PbS shell over the PbSe QDs (PbSe/PbS QDs) combined with in situ halide passivation. The strong electronic coupling from the PbSe core gives rise to significant carrier delocalization, which guarantees effective carrier transport. Benefited from the protection of PbS shell and in situ halide passivation, excellent trap-state control of QDs is eventually achieved after the ligand exchange. By a fine control of the PbS shell thickness, outstanding IR J_SC of 6.38 mA cm⁻² and IR V_OC of 0.347 V are simultaneously achieved under the 1100 nm-filtered solar illumination, providing a new route to unfreeze the trade-off between V_OC and J_SC limited by the photoactive layer with a given bandgap.     

Highly Stable Colloidal “Giant” Quantum Dots Sensitized Solar Cells

Colloidal quantum dots (QDs) are widely studied due to their promising optoelectronic properties. This study explores the application of specially designed and synthesized “giant” core/shell CdSe/(CdS)_x QDs with variable CdS shell thickness, while keeping the core size at 1.65 nm, as a highly efficient and stable light harvester for QD sensitized solar cells (QDSCs). The comparative study demonstrates that the photovoltaic performance of QDSCs can be significantly enhanced by optimizing the CdS shell thickness. The highest photoconversion efficiency (PCE) of 3.01% is obtained at optimum CdS shell thickness ≈1.96 nm. To further improve the PCE and fully highlight the effect of core/shell QDs interface engineering, a CdSe_x S_1?x interfacial alloyed layer is introduced between CdSe core and CdS shell. The resulting alloyed CdSe/(CdSe_x S_1?x )₅/(CdS)₁ core/shell QD‐based QDSCs yield a maximum PCE of 6.86%, thanks to favorable stepwise electronic band alignment and improved electron transfer rate with the incorporation of CdSe_x S_1?x interfacial layer with respect to CdSe/(CdS)₆ core/shell. In addition, QDSCs based on “giant” core/CdS‐shell or alloyed core/shell QDs exhibit excellent long‐term stability with respect to bare CdSe‐based QDSCs. The giant core/shell QDs interface engineering methodology offers a new path to improve PCE and the long‐term stability of liquid junction QDSCs.     

半导体量子点敏化太阳电池的最新进展

半导体量子点太阳电池目前是一个十分热门的研究领域,在未来新能源利用领域具有潜在的应用价值。首先,介绍了几种量子点敏化电极的制备技术。然后,着重评述了CdS,CdSe和PdS量子点敏化太阳电池近年的研究进展。通过对大量最新的相关文献进行总结发现,电池的性能主要受量子点的组装技术、能带结构以及基体材料等因素的影响。最后,分析了该领域中目前存在的问题,并提出了今后研究的对策,包括采用两种量子点共敏化方法以提高光俘获效率,采用沉积钝化层的方法以降低载流子复合。     

All-Inorganic CsPbI3 Quantum Dot Solar Cells with Efficiency over 16% by Defect Control

All-inorganic CsPbI₃ quantum dots (QDs) have shown great potential in photovoltaic applications. However, their performance has been limited by defects and phase stability. Herein, an anion/cation synergy strategy to improve the structural stability of CsPbI₃ QDs and reduce the pivotal iodine vacancy (V_I) defect states is proposed. The Zn-doped CsPbI₃ (Zn:CsPbI₃) QDs have been successfully synthesized employing ZnI₂ as the dopant to provide Zn²⁺ and extra I⁻. Theoretical calculations and experimental results demonstrate that the Zn:CsPbI₃ QDs show better thermodynamic stability and higher photoluminescence quantum yield (PLQY) compared to the pristine CsPbI₃ QDs. The doping of Zn in CsPbI₃ QDs increases the formation energy and Goldschmidt tolerance factor, thereby improving the thermodynamic stability. The additional I⁻ helps to reduce the V_I defects during the synthesis of CsPbI₃ QDs, resulting in the higher PLQY. More importantly, the synergistic effect of Zn²⁺ and I⁻ in CsPbI₃ QDs can prevent the iodine loss during the fabrication of CsPbI₃ QD film, inhibiting the formation of new V_I defect states in the construction of solar cells. Consequently, the anion/cation synergy strategy affords the CsPbI₃ quantum dot solar cells (QDSC) a power conversion efficiency over 16%, which is among the best efficiencies for perovskite QDSCs.     

Electro‐Optics of Colloidal Quantum Dot Solids for Thin‐Film Solar Cells

The electro‐optics of thin‐film stacks within photovoltaic devices plays a critical role for the exciton and charge generation and therefore the photovoltaic performance. The complex refractive indexes of each layer in heterojunction colloidal quantum dot (CQD) solar cells are measured and the optical electric field is simulated using the transfer matrix formalism. The exciton generation rate and the photocurrent density as a function of the quantum dot solid thickness are calculated and the results from the simulations are found to agree well with the experimentally determined results. It can therefore be concluded that a quantum dot solid may be modeled with this approach, which is of general interest for this type of materials. Optimization of the CQD solar cell is performed by using the optical simulations and a maximum solar energy conversion efficiency of 6.5% is reached for a CQD solid thickness of 300 nm.     

量子点激光器

主要介绍了量子点激光器的产生、量子点的生长制作、激光器基本结构和性能、最新进展和未来发展要解决的问题。     

Manipulating Electronic Energy Disorder in Colloidal Quantum Dot Solids for Enhanced Charge Carrier Transport

A realistic CQD solid model is developed that computes the charge carrier mobility using hopping transport models within an ensemble of individual CQD units. Large decreases in electron mobility of up to 70% as compared to the monodisperse case are observed when the energetic disorder in CQD films lies in the typical experimental range of 10%–15%. Furthermore, it is suggested that tailored and potentially experimentally achievable re‐arrangement of the CQD size ensemble combined with spatial doping control can mediate the reduction in mobility even in highly dispersive cases, and presents an avenue toward improved mobility and photovoltaic performance by up to 9% by leveraging fast carrier transport channels in highly polydisperse materials.     

Core/Shell Quantum Dots Solar Cells

Semiconductor nanocrystals, the so‐called quantum dots (QDs), exhibit versatile optical and electrical properties. However, QDs possess high density of surface defects/traps due to the high surface‐to‐volume ratio, which act as nonradiative carrier recombination centers within the QDs, thereby deteriorating the overall solar cell performance. The surface passivation of QDs through the growth of an outer shell of different materials/compositions called “core/shell QDs” has proven to be an effective approach to reduce the surface defects and confinement potential, which can enable the broadening of the absorption spectrum, accelerate the carrier transfer, and reduce exciton recombination loss. Here, the recent research developments in the tailoring of the structure of core/shell QDs to tune exciton dynamics so as to improve solar cell performance are summarized. The role of band alignment of core and shell materials, core size, shell thickness/compositions, and interface engineering of core/thick shell called “giant” QDs on electron–hole spatial separation, carrier transport, and confinement potential, before and after grafting on the carrier scavengers (semiconductor/electrolyte), is described. Then, the solar cell performance based on core/shell QDs is introduced. Finally, an outlook for the rational design of core/shell QDs is provided, which can further promote the development of high‐efficiency and stable QD sensitized solar cells.     

Quantum Junction Solar Cells: Development and Prospects

Nanocrystals, called semiconductor quantum dots (QDs), contain excitons that are three-dimensionally bound. QDs exhibit a discontinuous electronic energy level structure that is similar to that of atoms and exhibit a distinct quantum confinement effect. As a result, QDs have unique electrical, optical, and physical characteristics that can be used in a variety of optoelectronic device applications, including solar cells. In this review article, the stable and controllable synthesis of QD materials is outlined for upscaling solar cells, including material development and device performance enhancement. It includes a systematic variety of device structures for the fabrication of solar cells, such as QD, hybrid QD/organic, hybrid QD/inorganic, perovskite QD, and hybrid 2D MXene QD/perovskite. The mechanisms for the improvement of stability by QD treatment are examined. For example, the 2D MXene QD and/or Cu_1.8S nanocrystal doping significantly increases the long-term light and ambient stability of perovskite solar cells, resulting from improved perovskite crystallization, reduced hole transport layer (HTL) aggregation and crystallization of films, and reduced UV-induced photocatalytic activity of the electron transport layer (ETL). For the advancement of QD solar cells and their interaction with various materials, the conclusions from this review are crucial. Finally, future prospects for the development of QD solar cells as well as current challenges are discussed.     

高效率量子点中间带太阳电池的构建与实现

中间带太阳电池是为了充分利用太阳光谱中的红外光子能量而提出的一种高效率新概念太阳电池。介绍了中间带太阳电池的能量上转换原理、量子点中间带的物理优势、量子点中间带太阳电池的结构组态和理论转换效率。评述了它的近期研究进展,并提出了发展这种新概念太阳电池的若干技术对策,其中包括补偿量子点的积累应变、优化量子点的生长参数和选择新的量子点结构。最后指出,由于应变的补偿,有序量子点层的形成以及新量子点结构的采用使太阳电池的光伏性能得以有效改善。可以预期,具有高转换效率的量子点中间带太阳电池的构建与实现将会对未来的光伏技术与产业带来革命性的影响。     

Efficiency Enhanced Hybrid Solar Cells Using a Blend of Quantum Dots and Nanorods

The cell performance of organic‐inorganic hybrid photovoltaic devices based on CdSe nanocrystals and the semiconducting polymer poly[2,6‐(4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b′]‐dithiophene)‐alt‐4,7‐(2,1,3‐benzothiadiazole)] (PCPDTBT) is strongly dependent on the applied polymer‐to‐nanocrystal loading ratio and the annealing temperature. It is shown here that higher temperatures for the thermal annealing step have a beneficial impact on the nanocrystal phase by forming extended agglomerates necessary for electron percolation to enhance the short‐circuit current. However, there is a concomitant reduction of the open‐circuit voltage, which arises from energy‐level alterations of the organic and the inorganic component. Based on quantum dots and PCPDTBT, we present an optimized organic–inorganic hybrid system utilizing an annealing temperature of 210 °C, which provides a maximum power conversion efficiency of 2.8%. Further improvement is obtained by blending nanocrystals of two different shapes to compose a favorable n‐type network. The blend of spherical quantum dots and elongated nanorods results in a well‐interconnected pathway for electrons within the p‐type polmer matrix, yielding maximum efficiencies of 3.6% under simulated AM 1.5 illumination.