Synthesis and Upconversion Luminescence in LaF3:Yb3+, Ho3+, GdF3: Yb3+, Tm3+ and YF3:Yb3+, Er3+ obtained from Sulfide Precursors

Rare earth fluorides are mainly obtained from aqueous solutions of oxygen‐containing precursors. Probably, this method is simple and efficient, however, oxygen may partially be retained in the fluoride structure. We offer an alternative method: obtaining fluorides and solid solutions based on them from an oxygen‐free precursor. As starting materials, we choose sulfides of rare‐earth elements and solid solutions based on them. The fluorination is carried out by exposure to hydrofluoric acid of various concentrations. The transmission electron microscopy images revealed the different morphologies of the products, which depend on the concentration of the fluorinating component (HF) and the host element. The solid solution particle size varied from 30–35 nm in the case of GdF₃:Yb³⁺, Tm³⁺ (4 % HF) to larger structures with dimensions exceeding 200 nm, such as that for LaF₃:Yb³⁺, Ho³⁺ (40 % HF). The thermal characteristics, such as the temperatures of the transitions and melting and enthalpies, were determined for the solid solutions and simple fluorides. Applicability of the materials obtained as biological luminescent markers was tested on the example of upconversion luminescence, and good upconversion properties were detected.     

Preparation and upconversion luminescence of three-dimensionally ordered macroporous ZrO2: Er3+, Yb3+

The three-dimensionally ordered macroporous (3DOM) ZrO2: Er(3+), Yb(3+) materials were successfully synthesized by the sol-gel method combined with a polystyrene latex sphere templating technique, and their morphologies, surface physicochemical properties, and upconversion photoluminescence (UC-PL) properties were studied. The results indicate that the materials exhibited both porosity and strong UC-PL under the excitation of a 978 nm diode laser. In comparison with the nonporous samples, the relative intensity of the red ((4)F(9/2)-(4)I(15/2)) to the green ((4)S(3/2)/(2)H(11/2)-(4)I(15/2)) emission decreased visibly because of the decreased nonradiative relaxation in the 3DOM materials. It was also observed that the relative intensity of the green emission to the red emission increased significantly with the increasing excitation power. An indirect three-photon populating process occurred for the green emission as the excitation power and Yb(3+) concentration was high enough.     

Investigation of Er3+, Yb3+, Nd3+ doped yttrium calcium oxyborate for photon upconversion applications

In this work, investigation have been done on polycrystalline yttrium calcium oxyborate (YCa₄O(BO₃)₃) for the realization of existence of second harmonic generation and other photon upconversion processes as concurrent effect with the aid of Er, Yb, Nd trivalent lanthanide ions. Pure, Er:Yb co-doped and Er:Yb:Nd triply-doped YCa₄O(BO₃)₃ samples were prepared through solid state reaction and the phase identification has been done using powder X-ray diffraction spectral analysis. FTIR spectra show that the dopants increases the absorption of functional groups and modifies the lattice vibrational modes of YCa₄O(BO₃)₃. The spectral overlap of optical absorption bands of Er³⁺, Yb³⁺, Nd³⁺ ions in 840 nm–1070 nm region indicates the prospect of energy transfer between these ions. The photoluminescence spectrum of Er:Yb:Nd triply doped sample show good enhancement compared to pure and Er:Yb co-doped YCa₄O(BO₃)₃ samples. In the photon upconversion test carried out using 1064 nm Nd:YAG laser YCa₄O(BO₃)₃:Er:Yb:Nd sample produced green light with efficiency higher than the other two samples. Surface morphology of the samples was recorded using field emission scanning electron microscope and analysed. The elemental composition of the samples has been confirmed by energy dispersive X-ray spectral analysis.     

纳米TiO2基质掺杂稀土离子Er3+和Yb3+的上转换发光特性

采用溶胶-凝胶法制备了掺杂稀土离子Er3 及Er3 /Yb3 的TiO2纳米晶体,考察了样品在980 nm激发光源作用下,不同的稀土离子掺杂量、不同的焙烧温度、不同的激发温度等对其上转换发光特性的影响,并对Er3 /Yb3 共掺杂的上转换发光机制进行了探讨.     

Vacuum ultraviolet and near-infrared excited luminescence properties of Ca3(PO4)2:RE, Na (RE=Tb, Yb, Er, Tm, and Ho)

Tb³⁺, Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped Ca₃(PO₄)₂ were synthesized by solid-state reaction, and their luminescence properties were studied by spectra techniques. Tb³⁺-doped samples can exhibit intense green emission under VUV excitation, and the brightness for the optimal Tb³⁺ content is comparable with that of the commercial Zn₂SiO₄:Mn²⁺ green phosphor. Under near-infrared laser excitation, the upconversion luminescence spectra of Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped samples demonstrate that the red, green, and blue tricolored fluorescence could be obtained by codoping Yb³⁺-Ho³⁺, Yb³⁺-Er³⁺, and Yb³⁺-Tm³⁺ in Ca₃(PO₄)₂, respectively. Good white upconversion emission with CIE chromaticity coordinates (0.358, 0.362) is achieved by quadri-doping Yb³⁺-Tm³⁺-Er³⁺-Ho³⁺ in Ca₃(PO₄)₂, in which the cross-relaxation process between Er³⁺ and Tm³⁺, producing the ¹D₂-³F₄ transition of Tm³⁺, is found. The upconversion mechanisms are elucidated through the laser power dependence of the upconverted emissions and the energy level diagrams.     

An efficient upconversion luminescence energy transfer system for determination of trace amounts of nitrite based on NaYF4:Yb3+, Er3+ as donor

Based on NaYF₄:Yb³⁺, Er³⁺ upconversion nanocrystals as donor and 4-((4-(2-aminoethylamino)naphthalen-1-yl)diazenyl) benzenesulfonic acid dihydrochloride (ANDBS) as acceptor, an efficient luminescence energy transfer (LET) system was developed for selective and sensitive determination of trace amounts of nitrite. Based on Griess Reaction, ANDBS was generated by the quantitative reaction of nitrite, sulfanilamide and N-(1-naphtyl)-ethylenediamine dihydrochloride (N1NED). The degree of the overlaps between the emission spectrum of NaYF₄:Yb³⁺, Er³⁺ and the absorption spectrum of ANDBS were effective for luminescence energy transfer. Under the optimal condition, the upconversion luminescence quenching of NaYF₄:Yb³⁺, Er³⁺ was in proportion to the trace amounts of nitrite. The detection limit for nitrite achieved is 0.0046 μg mL^?1 and the system shows high sensitivity towards nitrite at 0.008000–0.2500 μg mL^?1 range.     

Biocompatible NaYF4:Yb,Er upconversion nanoparticles: Colloidal stability and optical properties

Currently, highly luminescent colloidal upconversion nanoparticles (UCNPs) have expanded an increasing interest of researchers because of their facilitating lability in the biomedical/clinical field. In this study, NaYF₄:Yb,Er UCNPs are prepared by eco-friendly metal complexation-based thermal decomposition method at a lower temperature in aqueous media. The phase structure, crystallinity, phase purity, morphology, colloidal dispersibility, surface structure, surface charge, and optical and luminescent properties were evaluated carefully by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive x-ray analysis (EDX), Thermogravimetric analysis (TGA), zeta potential, Fourier transform infrared (FTIR), UV/visible and photoluminescent spectroscopic techniques. XRD pattern shows a pure single-phase cubic structure with an average grain size of 30–35 nm. TEM and SEM micrographs exhibited irregularly shaped spherical morphologies, porous surface structures highly aggregated UCNPs with the narrow-size distribution. Positive zeta potential has shown value signifying high absorption in the visible region which indicates particle's good colloidal stability in aqueous media. Under NIR-laser light excitation, the UCNPs emit strong UC emission transitions in the visible region. A broad infrared absorption peak of hydroxyl groups (–OH) in FTIR spectrum and mass loss at a lower temperature in TGA verified the surface functionality of UCNPs, with high colloidal stability, and excellent biocompatibility in aqueous media. In terms of their surface characteristics and high luminescent properties, the NaYF₄:Yb,Er UCNPs could be interestingly applied in tagging of biomolecules, drug delivery, proteins labeling, and therapeutic and thermostats applications.     

Size-dependent upconversion luminescence in YF3:Yb/Tm nanobundles

The upconversion luminescent properties of YF₃:Yb³⁺(20%)/Tm³⁺(1%) nanobundles with different sizes (240-500 nm in length) were studied under 980-nm excitation. Ultraviolet (¹I₆ → ³F₄/³H₆ and ¹D₂ → ³H₆), blue (¹D₂ → ³F₄ and ¹G₄ → ³H₆), red (¹D₂ → ³H₄, ¹G₄ → ³F₄, and ³F₃ → ³H₆), and near infrared (³H₄ → ³H₆) emissions were observed. The results indicated that the relative intensity of the ultraviolet to the blue as well as the blue to the near infrared increased with decreasing the size of nanobundles. Especially, the position of the dominant red emission peak varied with the size of nanobundles. As the length of nanobundles increased to 500 nm, unusual ³F₃ → ³H₆ transition was observed, which was theoretically explained considering the decrease of the nonradiative transition rate of ³F₃ → ³H₄.     

Synthesis and surface modification of ultrasmall monodisperse NaYF4:Yb3+/Tm3+ upconversion nanoparticles

The emerging upconversion nanoparticles (UCNP) have gained substantial consideration in the field of bioanalytical as well as diagnostic applications. Therefore, great progress has been made in the synthesis and surface modification of luminescent UCNPs over the last two decades. In this paper, we have reported monodispersed and high luminescent upconversion nanoparticles NaYF₄: 20%Yb³⁺, 2%Tm³⁺ have been synthesized using a solvothermal method, followed by a coating of the NaYF₄ shell with a thin layer of SiO₂ on the surface to afford the core-shell NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles (NP@SiO₂). The prepared nanoparticles were of strong upconversion fluorescent emission intensity, hexagonal phase, and with an average size of about 8 ± 1 nm, which have been characterized by luminescence spectroscopy, powder X-ray diffraction (P-XRD), Dynamic light scattering (DLS), and Transmission electron microscopy (TEM). The results indicate that the NP@SiO₂ can be used for the conjugation of fluorescent probes for various biomolecules and can find applications in cancer cell imaging and disease diagnosis.     

Studies on Upconversion Mechanism of ZrO2 ： Er^3＋, Yb^3＋ Nanocrystals Under Excitation at 488 and 980 nm

Erbium, Ytterbium-codoped ZrO2 nanoparticles(ZrO2:Er^3 ,Yb^3 ) were prepared by the sol-emulsiongel technique. The purpose of the present study is the application of upconversion phosphor in the biological label. In order to make out the mechanism of upconversion under 980 nm excitation the 488 nm pump was used. The influence of temperature on the crystallite phase was studied. The results confirm the upconverted mechanism in ZrO2:Er^3 ,Yb^3 nanocrystals is due to an energy transfer upconversion(ETU).     

NaYF4∶Er3＋, Yb3＋纳米晶的液相合成

采用丙三醇液相结晶法制备了NaYF4∶Er3＋, Yb3＋上转换纳米晶, 合成步骤被简化. 常温下, 用980 nm的红外激光激发可以观察到很强的绿光、红光发射, 用荧光光谱仪记录了该上转换光谱. X射线粉末衍射(XRD)结果表明, 该方法制备NaYF4∶Er3＋, Yb3＋纳米晶属于立方混合六方晶系. 研究了纳米晶的上转换发光机理, 根据晶体场理论对Er3＋的两个上转换能级进行了Stark分裂计算, 对两个能级之间的谱线进行了归属, 进一步证实了980 nm光子激发Er3＋离子的上转换机理, 一个是连续吸收两个980 nm光子的过程(激发态吸收), 另一个是吸收980 nm光子后, 电子转移到亚稳态能级, 然后再吸收980 nm光子过程(能量转移上转换).     

Spectroscopic properties of Er3+, Yb3 + and Er3 + /Yb3+ doped metaphosphate glasses

The absorption and emission spectroscopies of Er3+ doped and Er3+/Yb3+ codoped Ca(PO3)2, Sr(PO3)2 and Ba(PO3)2 glasses have been studied. From the Judd-Ofelt intensity parameters, the spontaneous emission probabilities of some relevant transitions and the radiative lifetimes of several excited states of Er3+ have been calculated. The decay curves of the Er3+ emission at 1.5 microm have been measured at different temperatures. The data have been fitted using a stretched exponential function and the obtained experimental lifetimes have been compared with the calculated radiative lifetimes. The difference between the experimental and calculated lifetimes is attributed to the presence of traces of OH groups in the host glasses. The absolute OH content in some glasses has been determined from the infrared spectra. The emission spectra at 1.5 microm of the Er3+ ion in the codoped glasses have been measured at different temperatures. The integrated emission intensities decrease significantly on passing from room temperature to 13 K, suggesting a temperature dependence of the rate of the energy transfer process between Yb3+ and Er3+.     

ZnWO4:Er3+,Yb3+纳米棒的制备及发光性能

采用水热法以聚乙二醇为分散剂合成了Er3+,Yb3+共掺的ZnWO4纳米棒.X射线衍射、透射电子显微镜分析结果表明:所得产物为直径约20 nm的ZnWO4纳米棒.在激发波长为980 nm的半导体激光器做光源激发下,确定样品的3个发射峰的发光中心位于532、553和656 nm,分别对应于铒离子2H11/2→4I15/2,4S3/2→4I15/2和4F9/2→4I15/2的跃迁.     

Synthesis and photoluminescence properties of tunable emission phosphors Ca4Si2O7F2:Ce3+

The Ce³⁺ activated phosphors Ca₄Si₂O₇F₂:Ce³⁺ are prepared by a solid state reaction technique. The UV–vis luminescence properties as well as fluorescence decay time spectra are investigated and discussed. The results revealed that there were two kinds of Ce³⁺ luminescence behavior with 408 and 470 nm emissions, respectively. Under 355 nm excitation, the Ce(1) emission (408 nm) is dominant at low doping concentration, and then the Ce(2) emission (470 nm) get more important with increasing of Ce³⁺ concentrations in the host. The phosphors Ca₄Si₂O₇F₂:xCe³⁺ show tunable emissions from blue area to green-blue area under near-ultraviolet light excitation, indicating a potential application in near-UV based w-LEDs.     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Enhanced red emission from GdF3:Yb3+,Er3+ upconversion nanocrystals by Li+ doping and their application for bioimaging

Under 980?nm near-infrared (NIR) excitation, upconversion luminescent (UCL) emission of GdF(3):Yb,Er upconversion nanoparticles (UCNPs) synthesized by a simple and green hydrothermal process can be tuned from yellow to red by varying the concentration of dopant Li(+) ions. A possible mechanism for enhanced red upconverted radiation is proposed. A layer of silica was coated onto the surface of GdF(3):Yb,Er,Li UCNPs to improve their biocompatibility. The silica-coated GdF(3):Yb,Er,Li UCNPs show great advantages in cell labeling and in vivo optical imaging. Moreover, GdF(3) UCNPs also exhibited a positive contrast effect in T(1)-weighted magnetic resonance imaging (MRI). These results suggest that the GdF(3) UCNPs could act as dual-modality biolabels for optical imaging and MRI.     

Upconversion Luminescence Properties of a LiNb0.3Ta0.7O3:Er3+,Yb3+ Ceramic

A co-doped LiNb_0.3Ta_0.7O₃:Er³⁺,Yb³⁺ ceramic was prepared by a high temperature solid state procedure. Under the excitation of 980 nm laser radiation, intense 660 nm red light and 550 nm green light emissions corresponding to the ⁴F_9/2→⁴I_15/2 and ²H_11/2/⁴S_3/2→⁴I_15/2 transitions of Er³⁺ were observed. The change of Yb³⁺ concentration has a more significant influence on luminous intensity than the Er³⁺ concentration. The emission of red and green lights is attributed to a two-photon process. The upconversion luminescence mechanisms were analyzed in detail.     

Mn~(2+)掺杂NaBiF_4∶Yb/Er体系的可调控上转换发光

采用溶剂热法制备了不同Mn~(2+)掺杂量的NaBiF_4∶Yb/Er/Mn上转换发光体系,研究了其形貌、晶相、上转换发光性能随Mn~(2+)掺杂量的变化,并探讨了该体系的能量传递机理.实验结果表明,Mn~(2+)的掺杂不会引起NaBiF_4从六方相转变为立方相,但会增大其尺寸;同时在NaBiF_4体系中,Mn~(2+)可以与Er~(3+)进行能量传递,使红光发射得到增强,并且随着Mn~(2+)浓度的增加,红/绿光发射强度比也会随之增大.此外,还考察了NaBiF_4∶Yb/Er/Mn体系的变温发射光谱,发现当温度升高时,红/绿光强度比以及520 nm绿光与540 nm绿光发射强度比都总体上呈增大趋势.     

Host dependent frequency upconversion of Er3+/Yb3+-codoped bismuth-germanate glasses

The absorption and upconversion fluorescence spectra of a series of Er3+/Yb3+-codoped xBi(2)O(3)-(90-x)GeO2-10Na(2)O (BGN x, x=31, 36, 41, 46 and 51 mol%) glasses have been studied. Intense green and red emission bands at around 533, 548 and 659 nm, corresponding to the 2H(11/2)-->4I(15/2), 4S(3/2)-->4I(15/2) and 4F(9/2)-->4I(15/2) transitions of Er3+, respectively, were simultaneously observed at room temperature. The dependence of intensities of upconversion emission on excitation power and possible upconversion mechanisms were evaluated and analyzed. The important role of Bi(2)O(3) in upconversion intensity is observed and its influence on the green (533 and 548 nm) and red (659 nm) emissions is compared and discussed. The influence of Bi(2)O(3) on the upconversion emissions has been investigated based on the IR spectra.