A comparison between PARAMICS and VISSIM in estimating automated field‐measured traffic conflicts at signalized intersections

The main objective of this study is to investigate the relationship between field‐measured conflicts and simulated conflicts estimated from microsimulation model (PARAMICS) using the surrogate safety assessment model. An urban signalized intersection was selected for analysis. Automated video‐based computer vision techniques were used to identify field conflicts. The applicability of a two‐step model calibration procedure applied to VISSIM in a recent study was investigated using PARAMICS. In the first calibration step, the PARAMICS model was calibrated to ensure that the simulation gives reasonable results of average delay times. The second calibration step used a genetic algorithm procedure to calibrate PARAMICS parameters to enhance the correlation between simulated and field‐measured conflicts. Finally, the results obtained from PARAMICS were compared with results obtained from VISSIM. The comparison included three aspects: (i) the car‐following model and safety‐related parameters; (ii) the correlation between simulated and field‐measured conflicts; and (iii) the conflict spatial distributions. The results show that the default simulation model parameters give poor correlation with the field‐measured data, and therefore, using simulation models without a proper calibration should be avoided. Overall, good correlation between field‐measured and simulated conflicts was obtained after calibration for both models, especially at higher time‐to‐collision (TTC) values. At TTC threshold of 1.5 s, PARAMICS overestimates the number of conflicts and VISSIM underestimates it. Both models overestimated the number of conflicts at TTC threshold of 3.00 s. There were major differences between field‐measured and simulated conflicts spatial distributions for both simulation models. This indicates that despite the good correlation obtained from the calibration process, both PARAMICS and VISSIM do not capture the actual conflict occurrence mechanism. Copyright © 2016 John Wiley & Sons, Ltd.     

Traffic conflict models to evaluate the safety of signalized intersections at the cycle level

The safety of signalized intersections has often been evaluated at an aggregate level relating collisions to annual traffic volume and the geometric characteristics of the intersection. However, for many safety issues, it is essential to understand how changes in traffic parameters and signal control affect safety at the signal cycle level. This paper develops conflict-based safety performance functions (SPFs) for signalized intersections at the signal cycle level. Traffic video-data was recorded for six signalized intersections located in two cities in Canada. A video analysis procedure is proposed to collect rear-end conflicts and various traffic variables at each signal cycle from the recorded videos. The traffic variables include: traffic volume, maximum queue length, shock wave characteristics (e.g. shock wave speed and shock wave area), and the platoon ratio. The SPFs are developed using the generalized linear models (GLM) approach. The results show that all models have good fit and almost all the explanatory variables are statistically significant leading to better prediction of conflict occurrence beyond what can be expected from the traffic volume only. Furthermore, space-time conflict heat maps are developed to investigate the distribution of the traffic conflicts. The heat maps illustrate graphically the association between rear-end conflicts and various traffic parameters. The developed models can give insight about how changes in the signal cycle design affect the safety of signalized intersections. The overall goal is to use the developed models for the real-time optimization of signalized intersection safety by changing the signal design.     

城市道路平面交叉口安全评价研究

城市平面交叉口是城市交通冲突和事故频繁发生的地点。文章针对城市道路平面交叉口的交通安全现状,分析了平面交叉口的安全影响因素,提出引入事故率和冲突率为评价指标,建立了灰色理论评价方法,为城市道路平面交叉口的安全治理提供理论支持。     

A combined use of microscopic traffic simulation and extreme value methods for traffic safety evaluation

This paper proposes a combined usage of microscopic traffic simulation and Extreme Value Theory (EVT) for safety evaluation. Ten urban intersections in Fengxian District in Shanghai were selected in the study and three calibration strategies were applied to develop simulation models for each intersection: a base strategy with fundamental data input, a semi-calibration strategy adjusting driver behavior parameters based on Measures of Effectiveness (MOE), and a full-calibration strategy altering driver behavior parameters by both MOE and Measures of Safety (MOS). SSAM was used to extract simulated conflict data from vehicle trajectory files from VISSIM and video-based data collection was introduced to assist trained observers to collect field conflict data. EVT-based methods were then employed to model both simulated/field conflict data and derive the Estimated Annual Crash Frequency (EACF), used as Surrogate Safety Measures (SSM). PET was used for EVT measurement for three conflict types: crossing, rear-end, and lane change. EACFs based on three simulation calibration strategies were compared with field-based EACF, conventional SSM based on Traffic Conflict Techniques (TCT), and actual crash frequency, in terms of direct correlation, rank correlation, and prediction accuracy. The results showed that, MOS should be considered during simulation model calibration and EACF based on the full-calibration strategy appeared to be a better choice for simulation-based safety evaluation, compared to other candidate safety measures. In general, the combined usage of microscopic traffic simulation and EVT is a promising tool for safety evaluation.     

A latent variable representation of count data models to accommodate spatial and temporal dependence: Application to predicting crash frequency at intersections

This paper proposes a reformulation of count models as a special case of generalized ordered-response models in which a single latent continuous variable is partitioned into mutually exclusive intervals. Using this equivalent latent variable-based generalized ordered response framework for count data models, we are then able to gainfully and efficiently introduce temporal and spatial dependencies through the latent continuous variables. Our formulation also allows handling excess zeros in correlated count data, a phenomenon that is commonly found in practice. A composite marginal likelihood inference approach is used to estimate model parameters. The modeling framework is applied to predict crash frequency at urban intersections in Arlington, Texas. The sample is drawn from the Texas Department of Transportation (TxDOT) crash incident files between 2003 and 2009, resulting in 1190 intersection-year observations. The results reveal the presence of intersection-specific time-invariant unobserved components influencing crash propensity and a spatial lag structure to characterize spatial dependence. Roadway configuration, approach roadway functional types, traffic control type, total daily entering traffic volumes and the split of volumes between approaches are all important variables in determining crash frequency at intersections.     

Walking,cycling and the urban form: A Heckman selection model of active travel mode and distance by young adolescents

Physical inactivity of children and adolescents is a major public health challenge of the modern era but, when adequately promoted and nurtured, active travel offers immediate health benefits and forms future sustainable and healthy travel habits. This study explores jointly the choice and the extent of active travel of young adolescents while considering walking and cycling as distinct travel forms, controlling for objective urban form measures, and taking both a “street-buffer” looking at the immediate home surroundings and a “transport-zone” looking at wider neighborhoods. A Heckman selection model represents the distance covered while cycling (walking) given the mode choice being bicycle (walk) for a representative sample of 10–15 year-olds from the Capital Region of Denmark extracted from the Danish national travel survey. Results illustrate the necessity of different urban environments for walking and cycling, as the former relates to “street-buffer” urban form measures and the latter also to “transport-zone ” ones. Results also show that lessening the amount and the density of car traffic, diminishing the movement of heavy vehicles in local streets, reducing the conflict points with the density of intersections, and intervening on crash frequency and severity, would increase the probability and the amount of active travel by young adolescents. Last, results indicate that zones in rural areas and at a higher percentage of immigrants are likely to have lower probability and amount of active travel by young adolescents.     

Developing evasive action‐based indicators for identifying pedestrian conflicts in less organized traffic environments

There has been a growing interest in using surrogate safety measures such as traffic conflicts to analyse road safety from a broader perspective than collision data alone. This growing interest has been aided by recent advances in automated video‐based traffic conflict analysis. The automation enables accurate calculation of various conflict indicators such as time‐to‐collision and post‐encroachment time. These indicators rely on road users getting within specific temporal and spatial proximity from each other and therefore assume that proximity is a surrogate for conflict severity. However, this assumption may not be valid in many driving environments where close interactions between road users are common. The objective of this paper is to investigate the applicability of time proximity conflict indicators for evaluating pedestrian safety in less‐organized traffic environments with a high mix of road users. Several alternative behavioural conflict indicators based on detecting pedestrian evasive actions are recommended to better measure traffic conflicts in such traffic environments. These indicators represent variations in the spatio‐temporal gait parameters (step length, step frequency and walk ratio) immediately before the conflict point. A highly congested shared intersection in Shanghai, China, with frequent pedestrian conflicts is used as a case study. Traffic conflicts are analysed with the use of automated video‐based analysis techniques. The results showed that evasive action‐based indicators have higher potential to identify pedestrian conflicts and measure their severity in high mix less organized traffic environments than time proximity measures such as time‐to‐collision and post‐encroachment time. Copyright © 2016 John Wiley & Sons, Ltd.     

Disaggregate safety evaluation for signalized intersections and evaluation tool

This study was to evaluate traffic safety of four‐legged signalized intersections and to develop a spreadsheet tool for identifying high‐risk intersections taking into consideration vehicle movements, left‐turn signal phase types, and times of day. The study used data from Virginia and employed count data models and the empirical Bayes (EB) method for safety evaluation of such intersections. It was found that crash pattern defined by vehicle movements involved in a crash and time of day are important factors for intersection crash analysis. Especially for a safety performance function (SPF), a model specification (Poisson or NB), inclusion of left‐turn signal types, type of traffic flow variables, variable functional forms, and/or magnitudes of coefficients turned out to be different across times of day and crash patterns. The spreadsheet application tool was developed incorporating the developed SPFs and the EB method. As long as Synchro files for signal plans and crash database are maintained, no additional field data collection efforts are required. Adjusting the developed SPFs and the spreadsheet for recent traffic and safety conditions can be done by applying the calibration methods employed in the SafetyAnalyst software and the Highway Safety Manual. Implementing the developed tool equipped with streamlining data entry would greatly improve accuracy and efficiency of safety evaluation of four‐legged signalized intersections in localities and highway agencies that cannot operate the SafetyAnalyst. Copyright © 2010 John Wiley & Sons, Ltd.     

A study on adjustment factors for U-turns in left-turn lanes at signalized intersections

U-turns are treated as left-turns in the current procedures for estimating saturation flow rates at signalized intersections. While U-turning vehicles are usually mixed with left-turning vehicles in inside or left-turn lanes and conflict with opposing through traffic as left-turning vehicles, the vehicle operating characteristics are different. The objective of this paper is to investigate the effects of U-turns on the traffic flow in left-turn lanes. Field data of 600 headways of left-turning passenger cars and 160 headways of U-turning passenger cars are recorded. The average headways of U-turning passenger cars are found to be significantly larger than those of left-turning passenger cars. The effects of U-turning vehicles depend upon the percent of U-turning vehicles in the left-turn lane, as well as the order of formation in the traffic stream. Adjustment factors for varying percents of U-turning vehicles in left-turn lanes are established.     

Linking an activity-based travel demand model with traffic emission and dispersion models: Transport’s contribution to air pollution in Toronto

This paper describes the development of an integrated approach for assessing ambient air quality and population exposure as a result of road passenger transportation in large urban areas. A microsimulation activity-based travel demand model for the Greater Toronto Area – the Travel Activity Scheduler for Household Agents – is extended with capabilities for modelling and mapping of traffic emissions and atmospheric dispersion. Hourly link-based emissions and zone-based soak emissions were estimated. In addition, hourly roadway emissions were dispersed at a high spatial resolution and the resulting ambient air concentrations were linked with individual time-activity patterns derived from the model to assess person-level daily exposure. The method results in an explicit representation of the temporal and spatial variation in emissions, ambient air quality, and population exposure.     

Evaluation of variable speed limits to improve traffic safety

This paper examines automated control strategies of variable speed limits that aim at reducing crash potential on instrumented freeways. A real-time crash prediction model was developed to estimate crash potential based on short-term variation of traffic flow characteristics. A microscopic traffic simulation model was used to realistically simulate changes in traffic conditions as an effect of variable speed limits and combined with the crash prediction model for the evaluation of control logics. Within this integrated evaluation framework, the study investigated the effect of strategy control factors on the crash potential reduction and total travel time. The study results indicated that variable speed limits could reduce crash potential by 5–17%, by temporarily reducing speed limits during risky traffic conditions when crash potential exceeded the pre-specified threshold.     

Dual right-turn lanes in mitigating weaving conflicts at frontage road intersections in proximity to off-ramps

At frontage road intersections located downstream of freeway off-ramps, the use of dual right-turn lanes may provide improved weaving environments for right-turning vehicles from the off-ramp and reduce forced merges toward the desired right-turn bay. This paper investigates the safety impacts of the installation of dual right-turn lanes at frontage road intersections. A two-stage approach is used to estimate weaving conflicts as safety surrogates. In the first stage, micro-simulation models are calibrated based on field data to simulate vehicle trajectories. In the second stage, the trajectories are processed to estimate surrogate safety measures and frequency of weaving conflicts under different conditions. The two-stage approach is validated by correlation analysis between predicted weaving conflicts and actual crash rates. The results show that dual right-turn lanes can reduce weaving conflicts significantly compared to single exclusive right-turn lanes, and the safety benefits increase exponentially as weaving distance is reduced.     

Accidents involving pedestrians with their backs to traffic or facing traffic: an evaluation of crash characteristics and injuries

This paper examines pedestrian anatomical injuries and crash characteristics in back‐to‐traffic and facing‐traffic crashes. Pedestrian crashes involving pedestrians walking along streets (i.e. with their backs to traffic or facing traffic) have been overlooked in literature. Although this is not the most frequent type of crash, the crash consequence to pedestrians is a safety concern. Combining Taiwan A1A2 police‐reported accident data and data from the National Health Insurance Database from years 2003–2013, this paper examines anatomical injuries and crash characteristics in back‐to‐traffic and facing‐traffic crashes. There were a total of 830 and 2267 pedestrian casualties in back‐to‐traffic and facing‐traffic crashes respectively. The injuries sustained by pedestrians and crash characteristics of these two crash types were compared with those of other crossing types of crashes (nearside crash, nearside dart‐out crash, offside crash, and offside dart‐out crash). Odds of various injuries to body regions were estimated using logistic regressions. Key findings include that the percentage of fatalities in back‐to‐traffic crashes is the highest; logistic models reveal that pedestrians in back‐to‐traffic crashes sustained more head, neck, and spinal injuries than did pedestrians in other crash types, and unlit darkness and non‐built‐up roadways were associated with an increased risk of pedestrian head injuries. Several crash features (e.g. unlit darkness, overtaking manoeuvres, phone use by pedestrians and drivers, and intoxicated drivers) are more frequently evident in back‐to‐traffic crashes than in other types of crashes. The current research suggests that in terms of crash consequence, facing traffic is safer than back to traffic. Copyright © 2016 John Wiley & Sons, Ltd.     

Contrasting the direct use of data from traffic radars and video-cameras with traffic simulation in the estimation of road emissions and PM hotspot analysis

This study investigates the effect of traffic volume and speed data on the simulation of vehicle emissions and hotspot analysis. Data from a microwave radar and video cameras were first used directly for emission modelling. They were then used as input to a traffic simulation model whereby vehicle drive cycles were extracted to estimate emissions. To reach this objective, hourly traffic data were collected from three periods including morning peak (6–9 am), midday (11–2 pm), and afternoon peak (3–6 pm) on a weekday (June 23, 2016) along a high-volume corridor in Toronto, Canada. Traffic volumes were detected by a single radar and two video cameras operated by the Southern Ontario Centre for Atmospheric Aerosol Research. Traffic volume and composition derived from the radar had lower accuracy than the video camera data and the radar performance varied by lane exhibiting poorer performance in the remote lanes. Radar speeds collected at a single point on the corridor had higher variability than simulated traffic speeds, and average speeds were closer after model calibration. Traffic emissions of nitrogen oxides (NOx) and particulate matter (PM₁₀ and PM_2.5) were estimated using radar data as well as using simulated traffic based on various speed aggregation methods. Our results illustrate the range of emission estimates (NO_x: 4.0–27.0 g; PM₁₀: 0.3–4.8 g; PM_2.5: 0.2–1.3 g) for the corridor. The estimates based on radar speeds were at least three times lower than emissions derived from simulated vehicle trajectories. Finally, the PM₁₀ and PM_2.5 near-road concentrations derived from emissions based on simulated speeds were two or three times higher than concentrations based on emissions derived using radar data. Our findings are relevant for project-level emission inventories and PM hot-spot analysis; caution must be exercised when using raw radar data for emission modeling purposes.     

Effects of intersection field of view on emergent collision avoidance performance at unsignalized intersections: analysis based on driving simulator experiments

Proper intersection sight distance can effectively lower the possibility of intersection accidents. American Association of State Highway and Transportation Officials (2011) provide a series of recommended dimensions of intersection sight triangles for uncontrolled and stop/yield‐controlled intersections. However, in reality, although the actual intersection design for unsignalized intersections satisfies the requirements of sight distance and clear sight triangle in American Association of State Highway and Transportation Officials' guideline, there are still a large number of crashes occurring at unsignalized intersections for drivers running stop/yield signs or failing to slow down. This paper presents a driving simulator study on pre‐crash at intersections under three intersection field of view (IFOV) conditions. The aim was to explore whether better IFOVs at unsignalized intersections improve their emergent collision avoidance performance under an assumption of valid intersection sight distance design. The experimental results show drivers' ability to identify potential hazards to be significantly affected by their IFOVs. As drivers' IFOV improved, drivers were more likely to choose braking actions to avoid collisions. Better IFOVs were also associated with significant increases in brake time to intersection and significant reductions in deceleration rate and crash rate, thus leading to a lower risk of traffic crash involvement. The results indicate that providing a better IFOV for drivers at intersections should be encouraged in practical applications in order to improve drivers' crash avoidance capabilities. Copyright © 2016 John Wiley & Sons, Ltd.     

A programmable calculation procedure for number of traffic conflict points at highway intersections

Traffic movement conflict points at intersections are the points at which traffic movements intersect (including crossing, merging, and diverging). Numbers and distribution of different types of conflict points are used to evaluate intersection access management designs and safety performance. Traditionally, the determination of the numbers of conflict points for different traffic movements is based on manual methods, which causes the difficulty for computerized procedures to evaluate safety performance of different access management designs. Sometimes, a programmable calculation procedure may provide more effective solutions as compared with manual methods. This paper presents a programmable calculation procedure for the determination of the numbers of conflict points, which could be used as a basis for a computerized procedure. Concepts of virtual movement lanes and intersection quadrants are introduced to specify types of intersections, traffic lane configurations, and traffic movement regulations. Calculation models, based on such concepts, for traffic movement conflict points at signalized and unsignalized intersections can be obtained. In support of the procedure, case studies are presented in the paper. The procedure presented in the paper can be programmed into a computer program for the purpose of a computerized evaluation of intersection safety and design performance of different access management or control approaches. Copyright © 2012 John Wiley & Sons, Ltd.     

An optimal variable speed limits system to ameliorate traffic safety risk

Active Traffic Management (ATM) systems have been emerging in recent years in the US and Europe. They provide control strategies to improve traffic flow and reduce congestion on freeways. This study investigates the feasibility of utilizing a Variable Speed Limits (VSL) system, one key part of ATM, to improve traffic safety on freeways. A proactive traffic safety improvement VSL control algorithm is proposed. First, an extension of the METANET (METANET: A macroscopic simulation program for motorway networks) traffic flow model is employed to analyze VSL’s impact on traffic flow. Then, a real-time crash risk evaluation model is estimated for the purpose of quantifying crash risk. Finally, optimal VSL control strategies are achieved by employing an optimization technique to minimize the total crash risk along the VSL implementation corridor. Constraints are setup to limit the increase of average travel time and the differences of the posted speed limits temporarily and spatially. This novel VSL control algorithm can proactively reduce crash risk and therefore improve traffic safety. The proposed VSL control algorithm is implemented and tested for a mountainous freeway bottleneck area through the micro-simulation software VISSIM. Safety impacts of the VSL system are quantified as crash risk improvements and speed homogeneity improvements. Moreover, three different driver compliance levels are modeled in VISSIM to monitor the sensitivity of VSL effects on driver compliance. Conclusions demonstrated that the proposed VSL system could improve traffic safety by decreasing crash risk and enhancing speed homogeneity under both the high and moderate compliance levels; while the VSL system fails to significantly enhance traffic safety under the low compliance scenario. Finally, future implementation suggestions of the VSL control strategies and related research topics are also discussed.