Sr2Si5N8∶Eu2+荧光粉的制备与发光性能

以α-Si₃N₄,SrCO₃,Eu₂O₃为原料,采用碳热还原氮化法制备了Sr₂Si₅N₈∶Eu²⁺荧光粉。研究了材料的结构与光谱特性,分析了影响材料发光性能的工艺因素。结果表明,石墨粉含量和助熔剂的用量对Sr₂Si₅N₈相的形成和发光性能有重要影响。当n_C/n_Sr=1.5,助熔剂用量为4wt%时,合成样品的主晶相为正交晶系Sr₂Si₅N₈,在400~550 nm可见光激发下,可发射峰值波长位于609 nm荧光。激发带的位置与Eu²⁺离子浓度无关,为400~550 nm之间的宽带激发;但发射强度随Eu²⁺离子浓度的增加而增加,Eu²⁺离子浓度达到5mol%时发射强度达最大值,在Eu²⁺离子浓度为2mol%~5mol%之间,观察到发射峰的红移现象。     

酸处理对CuY催化剂孔结构及氧化羰基化性能的影响

对NaY分子筛(n_Si/n_Al=2.65)进行了草酸脱铝处理并作为载体采用液相离子交换法制备CuY催化剂,应用于常压甲醇氧化羰基化合成碳酸二甲酯(DMC)反应。NaY分子筛及其CuY催化剂通过N₂低温吸附-脱附、透射电子显微镜、X射线衍射、²⁹Si固体核磁共振、NH₃吸附程序升温脱附、吡啶吸附红外光谱、H₂程序升温还原、原子吸收等方法进行表征。研究结果表明,酸处理NaY分子筛后,骨架铝被脱除,导致骨架n_Si/n_Al比增加、相对结晶度降低并产生介孔,有利于产物分子的扩散,从而影响催化活性。采用4 h、2 mol·L^-1草酸处理NaY分子筛作为载体制备的CuY催化剂显示出较高的催化性能,DMC时空收率和甲醇转化率分别从103.6 mg·g^-1·h^-1和6.3%增加到184.9 mg·g^-1·h^-1和10.2%。产生的介孔能够促进催化剂中铜活性位的可接近性及反应物分子和产物分子的扩散。     

酸处理对CuY催化剂孔结构及氧化羰基化性能的影响

对NaY分子筛(n_Si/n_Al=2.65)进行了草酸脱铝处理并作为载体采用液相离子交换法制备CuY催化剂, 应用于常压甲醇氧化羰基化合成碳酸二甲酯(DMC)反应。NaY分子筛及其CuY催化剂通过N₂低温吸附-脱附、透射电子显微镜、X射线衍射、²⁹Si固体核磁共振、NH₃吸附程序升温脱附、吡啶吸附红外光谱、H₂程序升温还原、原子吸收等方法进行表征。研究结果表明, 酸处理NaY分子筛后, 骨架铝被脱除, 导致骨架n_Si/n_Al比增加、相对结晶度降低并产生介孔, 有利于产物分子的扩散, 从而影响催化活性。采用4 h、2 mol·L^-1草酸处理NaY分子筛作为载体制备的CuY催化剂显示出较高的催化性能, DMC时空收率和甲醇转化率分别从103.6 mg·g^-1·h^-1和6.3%增加到184.9 mg·g^-1·h^-1和10.2%。产生的介孔能够促进催化剂中铜活性位的可接近性及反应物分子和产物分子的扩散。     

色氨酸-镝(Ⅲ)配合物与鲱鱼精DNA的作用方式

采用UV光谱法、荧光光谱法,在pH=7.40的缓冲溶液中确定了镝(Ⅲ)与色氨酸的结合比n_Dy(Ⅲ)∶n_Trp=1∶3,Dy(Ⅲ)(Trp)₃配合物与鲱鱼精DNA的结合比n_{Dy(Ⅲ)(Trp)3}∶n_DNA=2∶1。用双倒数法确定了结合常数K_25℃=5.75×10⁴ L·mol^-1和K_37℃=3.27×10⁴ L·mol^-1。化学热力学研究显示配合物Dy(Ⅲ)(Trp)₃与hsDNA的结合为熵和焓共同驱动。结合Scatchard法和粘度法,确定了配合物Dy(Ⅲ)(Trp)₃与hsDNA之间主要为静电作用和嵌插作用。     

立方介孔相含钕氧化硅的合成与表征

以十六烷基三甲基溴化铵为结构导向剂，通过水热法合成了具有立方结构的含钕Nd-MCM-48介孔分子筛材料。XRD和TEM测试表明当n_Nd/n_Si<0.05时可以获得典型的长程有序介孔立方结构相，随n_Nd/n_Si比的增加，晶胞参数的增大和红外吸收光谱(FT-IR)的变化为Nd进入介孔分子筛骨架中提供了有力证据。N₂吸附-脱附实验给出了其BET表面积为1 195 m²·g^-1，BJH平均孔径为3.6 nm。紫外-可见漫反射光谱(UV-Vis)证明钕氧形成一种八面体结构。X射线光电子能谱(XPS)进一步证明钕主要以三价形式存在于立方介孔分子筛骨架中。     

nFe3+/nSr2+和nOH-/nNO3-对锶铁氧体纳米片结构及磁性能的影响

采用改进的水热法成功合成了单分散的纯相锶铁氧体纳米片。借助DLS、XRD、FTIR、SEM、EDS和VSM等分析测试手段对SrFe₁₂O₁₉铁氧体粉体的粒度、结构、形貌和磁性能进行表征。研究结果表明,在240℃保温5 h,物质的量之比n_Fe³⁺/n_Sr²⁺(R_F/S)和n_OH^-/n_NO3^-(R_O/N)分别为5和2时,所得产物为单分散的纯相六角SrFe₁₂O₁₉铁氧体纳米片。随着R_F/S和R_O/N的变化,合成样品中有少量SrCO₃和Fe₂O₃杂相存在,这主要与反应条件和离子比例有关。磁性能测试结果显示,所得纯相的六角SrF₁₂O₁₉铁氧体纳米片具有优异的磁性能,其饱和磁化强度和矫顽力分别达到60.91 emu·g^-1和94.83 kA·m^-1,使其在医疗、催化和生物等高技术领域具有潜在的应用。     

含有共轭炔基的发光Pt(Ⅱ)配合物发光性质的密度泛函理论研究

本文利用密度泛函(DFT)和含时密度泛函(TDDFT)方法研究了一系列配合物Pt(ppy)(C≡C)_nPh(ppy=6-phenyl-2,2′-bipyridine n=1～6)的基态和激发态的电子结构和发射光谱。计算揭示,当(C≡C)_n链长n=1～3时,配合物1～3的磷光发射被指认为是 ³[π^*(ppy) → Pt(5d),π((C≡C)_nPh)](³LMCT/³LLCT)的混合电荷跃迁。而当n=4～6时,配合物4～6的磷光发射主要是来自于(C≡C)_nPh配体内部³ππ^*跃迁(³ILCT)和少部分的³LLCT微扰跃迁。通过分析前线轨道成份,可以预测当炔基链长n趋于∞时,电荷跃迁将完全发生在炔基链的π轨道之间。     

一维链状希夫碱铜配合物的高效光芬顿试剂活性研究

合成了2个希夫碱配合物[Cu(HL¹)ClO₄]_n(1)和[Cu(HL²)NO₃]_n(2)(H₂L¹=N-[(2-oxy-acetate)benzyl]-2-amino ethanol, H₂L²=N-salicylidene-3-amino propanol),并将其在无酸化条件下用作甲基橙降解的光芬顿催化剂。1和2均为一维链状结构且铜为六配位的拉长八面体配位构型。它们均具有优秀的均相光芬顿试剂活性且1的光催化活性更优秀。实验结果表明,本研究中的配体结构对铜配合物的光催化活性有影响。     

线性BC2nB (n＝1～12)的结构特征和电子光谱的理论研究

应用密度泛函理论, 在B3LYP/6-31G^*水平上优化得到了线性簇合物BC_2nB (n＝1～12, D_(h)的平衡几何构型, 并计算了它们的谐振动频率. 在优化平衡几何构型下, 通过TD-B3LYP/cc-pvDZ和TD-B3LYP/cc-pvTZ计算, 分别得到了n＝1～12和n＝1～7的电子跃迁的垂直激发能和对应的振子强度. 在B3LYP/6-311＋G^*水平上计算得到了簇合物BC_2nB (n＝1～12, D_(h)的电离能. 基于计算结果, 导出了BC_2nB体系电子跃迁能以及第一电离能与体系大小n的解析表达式.     

非晶红色荧光粉Cd3Al2Si3O12∶Eu3+的制备及发光性能

使用溶胶-凝胶法制备了Cd₃Al₂Si₃O₁₂∶Eu³⁺非晶体系红色荧光粉,并对其发光性质进行了研究。该荧光粉在Eu³⁺的位于394 nm的⁵L₆能级和464 nm的⁵D₂能级的激发下能够产生强的⁵D₀→⁷F₂的红光特征发光,最佳掺杂摩尔分数为25%。Cd₃Al₂Si₃O₁₂∶Eu³⁺荧光粉与传统的Y₂O₃∶Eu³⁺相比较,其发光强度是Y₂O₃∶Eu³⁺的2.4倍左右(在394和464 nm的激发下)。Cd₃Al₂Si₃O₁₂∶Eu³⁺的热稳定性好,比已经商业化的YAG∶Ce³⁺的热猝灭影响要小得多。所有这些结果表明Cd₃Al₂Si₃O₁₂∶Eu³⁺可作为暖白光LED用红色荧光粉。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.