Synthesis and luminescent properties of polycrystalline Gd2(MoO4)3:Dy3+ for white light-emitting diodes

Polycrystalline Gd₂(MoO₄)₃:Dy³⁺ phosphors have been synthesized by high temperature solid-state reaction method. The phosphors were characterized with X-ray diffractometer, thermogravimetric analysis and different scanning calorimeter, scanning electron microscopy, and photoluminescence spectrofluorimeter. Several peaks at 351, 389, 425, 452, and 472 nm appeared in photoluminescence excitation spectrum, which matched well with the emission of the ultraviolet (UV) and blue-light emitting diode (LED) chips. Upon excitation at 389 nm UV light, intense emissions centered at 484, 575 and 668 nm were attributed to the transitions of ⁴F_9/2→⁶H_15/2, ⁴F_9/2→⁶H_13/2 and ⁴F_9/2→⁶H_11/2 of Dy³⁺, respectively. The chromaticity coordinates and correlative color temperatures have been calculated and presented in the Commission International de I'Eclairage (CIE) diagrams. The results indicated that Gd_1.9(MoO₄)₃:Dy_0.1³⁺ with CIE coordinates of (x=0.38, y=0.41) and the correlative color temperature of 4134 K is a potential candidate for white LEDs.     

Pr~(3+)-doped Li_2SrSiO_4 red phosphor for white LEDs

Novel red phosphors,Li2Sr1-1.5xSiO4:xPr3+(x=0.002,0.003,0.004,0.005,0.006 and 0.008),were synthesized by conventional solid state reaction and the luminescent properties were investigated.The as-prepared phosphors showed red emission at 610 nm under excitation of blue light at 452 nm,indicating that they were promising candidates for red phosphors in the fabrication of white LEDs via blue LED chips.Their excitation bands at 452,476 and 487 nm were attributed to transitions of 3H4→3P2,3H4→3P1+1I6,3H4→3P0 of Pr3+ ion.The red emissions at 606 and 610 nm were originated from the 3P0-3H6 and 1D2-3H4 transitions of Pr3+.The optimum doping concentration of Pr3+ in Li2Sr1-1.5xSiO4:xPr3+ was determined to be x=0.004.With the concentration of Pr3+ over x=0.004,the fluorescence intensity of Li2Sr1-1.5xSiO4:xPr3+ decreased,indicating the concentration quenching occurred.     

Growth and characterization of ferroelectric Tb2（MoO4）3 crystal

By using Zb4O7 and MoO4 as starting materials, ferroelectric Tb2(MoO4)3 crystal was grown by the Czochralski method. The as-grown crystal was pale green color, transparent and crack-free. X-ray powder diffraction (XRPD), transmission spectrum, dielectric con-stant and polarization-electric field (P-E) hysteresis loop measurements were performed to characterize the crystal. The XRPD confirmed the as-grown crystal to be Tb2(MoO4)3. The transmission spectrum of the crystal showed that its transmittance in the entire visible and most near-infrared region was more than 70% except for an absorption peak around 486 nm. Obvious dielectric anomaly could be observed at low frequencies with increasing temperature through the dielectric constant measurement and the Curie temperature of Tb2(MoO4)3 crystal was determined to be 162.3℃. The unsaturated P-E hysteresis loops indicated that it was difficult for the ferroelectric domains in Tb2(MoO4)3 crystal to array regularly with repeated switching of the electric field.     

Combustion synthesis and luminescence properties of Ca4Y6(SiO4)6O:Eu3+red phosphor for white LEDs

Eu3+activated Ca4Y6(SiO4)6O phosphors were prepared by combustion synthesis method, and their morphologies and lu-minescent properties were investigated. Field scanning electron microscopy (FSEM) confi...     

Luminescent properties and application of Eu3+ -activated Gd2(MoO4)3 red-emitting phosphor with pseudo-pompon shape for solid-state lighting

Eu3+ -activated Gd2(MoO4)3 pseudo-pompon-like red-emitting phosphors were prepared by solid-state method.The structure,morphology,and luminescent properties of these powder samples were investigated by X-ray diffraction (XRD),scanning electron microscopy(SEM),and fluorescent spectrophotometry,respectively.The as-obtained phosphors were single crystalline phase with orthorhombic unit cell.The particles of the powder samples had the length of 5-12 μm and width of 3-7 μm with flake shape and large surface area,which is suitable for manufacture of white LEDs.The phosphor could be efficiently excited by the incident light of 348-425 nm,well matched with the output wavelength of near-UV (In,Ga)N chip,and re-emitted an intense red light peaking at 615 nm.By combing this phosphor with a～395 nmemitting (In,Ga)N chip,a red LED was fabricated,so that the applicability of this novel phosphor to white LEDs was confirmed.It is considered to be an efficient red-emitting conversion phosphor for solid-state lighting based on (In,Ga)N LEDs.     

Luminescent properties of Ca2SiO4:Eu3+ red phosphor for trichromatic white light emitting diodes

The luminescent properties of Eu3 doped Ca2SiO4 red phosphors synthesized by the flux fusion reaction method were investigated. It was found that the excitation spectrum included two regions: the weak excitation band below 325 nm and strong narrow peaks above 325 nm. The main peak of the excitation band was located at 400 nm. The peaks located at 290 nm were assigned to the combination of the charge transfer transition of O-Eu, peaks above 325 nm (325, 385, 400, 470, 511, and 539 nm) were assigned to the f–f transitions of Eu3 . The emission spectrum was dominated by the red peak located at 612 nm due to the electric dipole transition of 5D0–7F2. In addition, the ef- fects of the Eu3 content and charge compensators of Li , Na , K , and Cl– ions on the emission intensity were investigated. The experiment results suggested that the strongest emission was obtained when the concentration of the Eu3 ions was 0.3 mol–1, and Li ions gave the best improvement to enhance the emission intensity. Ca2SiO4:Eu3 , Li was thus suitable for low-cost trichromatic white light emitting diodes (WLED) based on UV InGaN chip.     

Synthesis and photoluminescence properties of novel red-emitting Ca14Mg2(SiO4)8:Eu3+/Sm3+ phosphors

Novel red-emitting Eu3+, Sm3+ singly doped and co-doped Ca14Mg2(SiO4)8 phosphors were prepared by conventional solid- state reaction. Powder X-ray diffraction patterns were employed to confirm phase pu...     

Single-phase full-color Ba_3Lu_2（SiO_4）_3：Eu~（2＋） phosphor for white-light emitting diodes

we developed a new silicate-based full-color phosphor Ba3Lu2(SiO4)3:Eu2+ through solid state reaction.The host crystal structure was isostructural with Ca3Y2(SiO4)3 instead of garnet-type.The phosphor absorbed near-ultraviolet light from 250 to 400 nm,which was very suitable for a color converter of white LED that used UV-LED as the primary light source.The photoluminescence peak wavelength of Ba3Lu2(SiO4)3:Eu2+ was about 461 nm and a shoulder peak was around 522 nm,which resulted from the 5d-4f transition ...     

Photoluminescent properties of Sr2SiO4:Eu3+ and Sr2SiO4:Eu2+ phosphors prepared by solid-state reaction method

Eu2+ and (or) Eu3+ doped Sr2SiO4 phosphors particles were synthesized by a conventional solid-state reaction technique, and their structural and optical properties were investigated. The X-ray diffraction (XRD) results showed that the obtained phosphors were composed of orthorhombic α'-Sr2SiO4 and monoclinic β-Sr2SiO4 phase. When excited under 256 nm, Sr2SiO4:Eu3+ phosphors showed intense emission in the red region. Sr2SiO4:Eu3+ phosphors exhibited white emissions (x=0.30, y=0.40, TC=6500 K) ranging from 425 to 650 nm when it was excited by near-ultraviolet (near-UV) light, indicating that Sr2SiO4:Eu2+ was a good light-conversion phosphor candidate for near-UV chip.     

Mechanisms of Fluorescence Quenching of Pr^3＋-Doped PbWO4 Crystal

Fluorescence decay curves of the ^3P0 and ^1D2 manifolds in Pr^3＋ doped PbWO4 crystal were measured at room temperature and fluorescence lifetimes of both manifolds were estimated. Combining with the radiative lifetimes of the manifolds calculated on the basis of the modified J-O theory, the main mechanisms for the fluorescence quenching of the manifolds were analyzed. The multi-phonon relaxation and the cross-relaxation energy transfer are the major reasons for the fluorescence quenching of the ^3P0 and ^1D2 manifolds, respectively. The Inokuti-Hirayama model was used to analyze the fluorescence decay curve of the ^1D2 manifold and the cross-relaxation of dlpole-dipole interaction was confirmed. Consequently, the ^3p0 manifold is more favorable as an upper laser level than the ^1D2 manifold.     

Synthesis and luminescence properties of a novel red-emitting phosphor SrCaSiO_4：Eu~（3＋） for ultraviolet white light-emitting diodes

A novel red phosphor based on Eu3+-activated SrCaSiO4 was successfully synthesized by conventional solid state reaction method and the photoluminescence properties were investigated. X-ray diffraction (XRD) patterns indicated that SrCaSiO4:Eu3+ phosphors belong to orthorhombic crystal system (space group=Pmnb). The photoluminescence (PL) excitation spectrum showed broad-band absorption and the strongest excitation peak at 397 nm contributed to the 7F0→5L6 transition which matched well with the emission of a...     

Temperature effects on photoluminescence of YAG:Ce3+ phosphor and performance in white light-emitting diodes

The well crystalline YAG:Ce3 phosphor was synthesized by solid-state method, and the temperature dependence of excitation and emission spectra of YAG:Ce3 phosphor were investigated in the temperature range from room temperature to 573 K. With temperature increasing, it was noted that the emission intensity of as-prepared phosphors decreased considerably more rapidly when pumped by 460 nm than by 340 nm. The temperature-intensity curves under different excitation wavelengths were obtained using an Arrhenius function, and the corresponding activation energies were also obtained respectively. Thus, the experimental phenomenon was discussed in terms of nonradiative decay rate. The effects of as-prepared phosphors on the performance of the white LED with changing temperature were also studied.     

Luminescence properties of YAl3(BO3)4 phosphors doped with Eu3+ ions

YAl3(BO3)4: Eu3+ phosphors were prepared by the conventional solid state reaction. The phase structure and morphology were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). Doping YAl3(BO3)4: Eu3+ phosphors with concentration of Eu3+ ions of 0, 2, 5, 8 and 10 mol% were studied and their luminescent properties at room temperature were discussed. The excitation spectrum of Y0.95Eu0.05Al3(BO3)4 was composed of a broad band centered at about 252 nm and a group of lines in the longer wavelength re-gion. In the emission spectra, the peak wavelength was about 614 nm under a 252 nm UV excitation. The optimal doping concentration of Eu<3+ ions in YAl3(BO3)4: Eu3+ phosphors was 8 mol%.     

Luminescent characteristics of Ba3Y2（BO3）4：Eu^3＋ phosphor for white LED

The Ba3Y2（BO3）4：Eu^3＋ phosphor was synthesized using a high temperature solid-state reaction method and the luminescent characteristics were investigated. The emission spectrum exhibited one strong red emission at 613 nm, corresponding to the electric dipole 5D0-TF2 transition of Eu^3＋, under 365 nm excitation. The excitation spectrum of 613 nm indicated that the Ba3Y2（BO3）n：Eu^3＋ phosphor was effectively excited by ultraviolet （UV） （254, 365 and 400 nm） and blue （470 nm） light. The effect of Eu^3＋ concentration on the 613 nm emission of the Ba3Y2（BO3）n：Eu^3＋ phosphor was measured. The results showed that the emission intensity increased with increasing Eu^3＋ concentration, and then decreased. The CIE color coordinates of Ba3Y2（BO3）4：Eu^3＋ phosphor were x=0.641 and y=0.359 at 15 mol.% Eu^3＋.     

Preparation and luminescence properties of Ce3＋/Dy3＋-codoped fluorosilicate glass ceramics

The Ce3+and Dy3+ co-doped fluorosilicate glass and glass ceramics containing SrF2 or CeF3 nanocrystals were prepared under re-ducing atmosphere. The precipitated nano-crystalline phase shifted from cubic SrF2 to hexagonal CeF3 gradually with the heat treatment tem-perature increasing from 620 to 680 °C. The glass and glass ceramics emitted white light, deriving from a combination of the Ce3+ blue and the Dy3+ yellow light. The CIE coordinates could be tuned by adjusting the ratio of Ce3+/Dy3+ concentration. The luminescence could be en-hanced significantly by annealing the samples at the temperatures lower than 640 °C.     

Intense blue-emitting Ca₂PO₄Cl:Eu²⁺ phosphor for near-ultraviolet converting white light-emitting diodes

A blue phosphor Ca2PO4Cl:Eu2+(CAP:Eu2+) was synthesized by solid state reaction.The Ca2PO4Cl:Eu2+ exhibited high quantum efficiency and excellent thermal stability.The luminescent intensity of Ca2PO4Cl:Eu2+ was found to be 128% under excitation at 380 nm,149% under 400 nm,and 247% under 420 nm as high as that of BaMgAl10O17:Eu2+.The optimal doping concentration was observed to 11 mol.% of CAP:Eu2+.The energy transfer between Eu2+ ions in CAP were occurred via electric multipolar interaction,and the critical transfer distance was estimated to be 1.26 nm.A mixture of blue-emitting Ca2PO4Cl:Eu2+,green-emitting(Ba,Sr)2SiO4:Eu2+ and red-emitting CaAlSiN3:Eu2+ phosphors were selected in conjunction with 400 nm chip to fabricate white LED devices.The average color-rendering index Ra and correlated color temperature(Tc) of the white LEDs were found to be 93.4 and 4590 K,respectively.The results indicated that it was a promising candidate as a blue-emitting phosphor for the near-UV white light-emitting diodes.     

Hydrothermal synthesis,structure study and luminescent properties of YbPO₄:Tb³⁺ nanoparticles

YbPO4:Tb3+ were synthesized by mild hydrothermal method.The luminescent properties,morphologies and structure of the obtained powders were characterized by photoluminescence(PL) spectra,FESEM,X-ray diffractometer(XRD) and FTIR.The results showed that the prepared YbPO4:Tb3+ nanoparticles were pure tetragonal phase and the average grain size varied with increasing of Tb3+ concentration.Hydrothermal temperature was revealed to be the key factor to enhance the emission intensity of YbPO4:Tb3+ phosphors.The spherical nanoparticles could be effectively excited by near UV(369 nm) light and exhibited green performance at 543 nm(5D4→7F5),489 nm(5D4→7F6) and 586 nm(5D4→7F4).The CIE chromaticity was calculated to be x=0.298,y=0.560.The YbPO4:Tb3+ nanoparticles exhibited potential to act as UV absorber for solar cells to enhance the conversion efficiency.