Submersible microbial fuel cell for electricity production from sewage sludge

A submersible microbial fuel cell (SMFC) was utilized to treat sewage sludge and simultaneously generate electricity. Stable power generation (145 +/- 5 mW/m2, 470 omega) was produced continuously from raw sewage sludge for 5.5 days. The maximum power density reached 190 +/- 5 mW/m2. The corresponding total chemical oxygen demand (TCOD) removal efficiency was 78.1 +/- 0.2% with initial TCOD of 49.7 g/L. The power generation of SMFC was depended on the sludge concentration, while dilution of the raw sludge resulted in higher power density. The maximum power density was saturated at sludge concentration of 17 g-TCOD/L, where 290 mw/m2 was achieved. When effluents from an anaerobic digester that was fed with raw sludge were used as substrate in the SMFC, a maximum power density of 318 mW/m2, and a final TCOD removal of 71.9 +/- 0.2% were achieved. These results have practical implications for development of an effective system to treat sewage sludge and simultaneously recover energy.     

污泥处理技术发展

综述目前污泥处理技术的发展概况,介绍污泥减量化和资源化技术,分别从超声波破解、微型动物捕食、臭氧氧化和污泥解偶联等方面介绍了污泥减量化的最新工艺技术;从利用剩余污泥做碳源、建材、肥料及制油等方面总结了污泥资源化的最新成果。     

Adsorption behavior of activated carbon derived from pyrolusite-modified sewage sludge: equilibrium modeling, kinetic and thermodynamic studies

Activated carbon was developed from sewage sludge using pyrolusite as an additive. It was demonstrated that the removal efficiency of two synthetic dyes (Tracid orange GS and Direct fast turquoise blue GL) by the produced adsorbent was up to 97.6%. The activated carbon with pyrolusite addition had 38.2% higher surface area, 43.8% larger micropore and 54.4% larger mesopore production than ordinary sludge-based activated carbons. Equilibrium adsorption isotherms and kinetics were also investigated based on dyes adsorption tests. The experimental data were analyzed by the Langmuir and Freundlich models of adsorption, and the results fitted well to the Langmuir isotherm. The kinetic data have been analyzed using pseudo-first-order, pseudo-second-order and intraparticle diffusion equation. The experimental data fitted very well with pseudo-second-order kinetic model. Activation energies for the adsorption processes ranged between 8.7 and 19.1 kJ mol 1. Thermodynamic parameters such as standard free energy (deltaG0), standard enthalpy (deltaH0) and standard entropy (deltaS0) were evaluated. The adsorption of these two dyes on the activated carbon was found to be a spontaneous and endothermic process in nature.     

Energy and nutrient recovery from sewage sludge via pyrolysis.

Energy recovery and nutrient reuse from sewage sludge has traditionally been achieved via anaerobic digestion/power generation with land application of the biosolids. By contrast, thermal processes such as pyrolysis have typically been used only for energy recovery. One such technology has demonstrated at commercial scale that all of the energy in sludge can be beneficially recovered and reused. No attempt was however made to recover and reuse sludge nutrients. There are many potential benefits of using pyrolysis for both energy and nutrient recovery. Firstly, unlike digestion, the principal energy product is oil, which can readily be stored and used when required, ensuring that energy recovery is maximised. Secondly is that the sludge nutrients are recovered in the pyrolysis char. Laboratory soil incubation studies using char from the Subiaco demonstration plant were conducted over an eight-week period to confirm nutrient availability. Results from this study showed that the phosphorus in the char is plant available although the nitrogen was insoluble. Based on these results it appears that there is potential to use pyrolysis as an effective means to recover and reuse both the energy and the very valuable phosphorus present in sewage sludges.     

Potentials of using nanofiltration to recover phosphorus from sewage sludge.

Due to the depletion of mineral phosphorus resources there is an increasing demand for efficient phosphorus recovery technologies. In this study the potential of nanofiltration to recover phosphorus from pre-treated sewage sludge is investigated. The efficiency of three commercial nanofiltration membranes (Desal 5DK, NP030; MPF34) was tested using model solutions. Desal 5DK showed the best selectivity for phosphorus. A pH of lower than 1.5 was found to be most suitable. Desal 5DK was used on four different sewage sludge ash eluates and on one sewage sludge. In these experiments it was shown that a separation of phosphorus from undesired components such as heavy metals was possible with significant variations in the efficiency for the different ash and sludge types. Additionally the achievable product recovery was investigated with model solutions. A product recovery of 57.1% was attained for pH 1 and 41.4% for pH 1.5.     

Use of citric acid for heavy metals extraction from contaminated sewage sludge for land application.

Recent studies revealed that organic acids such as citric and oxalic acids seemed to be more promising as chemical extracting agents for removal of heavy metals from contaminated sludge, since they are biodegradable and can attain a higher metal extraction efficiency at mildly acidic pH compared to other extracting agents. Results of a lab-scale study on the efficiency of citric acid in the extraction of chromium (Cr), copper (Cu), lead (Pb), nickel (Ni) and zinc (Zn) from anaerobically digested sludge, revealed that citric acid seemed to be highly effective in extracting Cr (at 100%), Cu (at 88%), Ni (at 98%) and Zn (at 100%) at pH 2.33, mostly at 5 days leaching time except for Cu and Zn, which are at 1 day and 2 h contact times respectively. Lead removal at the same pH was also high at 95% but at a longer leaching time of 11 days. At pH 3, citric acid seemed to be highly effective in extracting Pb (at 100%) at 1 day leaching time, although higher removals were also attained for Ni (70%) and Zn (80%) at only 2 h leaching time. Chemical speciation studies showed that Cr, Cu and Ni in the sludge sample seem to predominate in residual fractions, while Pb and Zn were found mostly bound to organic and inorganic matter forms, hence the potential of the sludge for land application.     

Experience and lessons learned from sewage sludge pyrolysis in Australia.

Management of sewage sludge via "publicly acceptable" methods is becoming increasingly difficult, primarily due to health and environmental concerns with respect to reuse of the product in agriculture. Consequently thermal processes are gaining popularity with significantly increased interest being shown in pyrolysis and gasification processes, due to their "non-incineration status". One such process is the ENERSLUDGE technology which has been developed and commercialised by Environmental Solutions International Ltd (ESI). The world's first commercial ENERSLUDGE plant is located at the Subiaco Wastewater Treatment Plant (WWTP) that was handed over to the client, the Water Corporation of Western Australia in June 2001. Extensive design knowledge and operational experience has now been accumulated from this commercial pyrolysis facility and future applications of the technology will benefit immensely from the lessons learned and experience gained from this facility.     

Anaerobic thermophilic digestion of sewage sludge with a thickened sludge recycle

The process of anaerobic thermophilic digestion of municipal wastewater sludge with a recycled part of thickened digested sludge, was studied in semi-continuous laboratory digesters. This modified recycling process resulted in increased solids retention time (SRT) with the same hydraulic retention time (HRT) as compared with traditional digestion without recycling. Increased SRT without increasing of HRT resulted in the enhancement of volatile substance reduction by up to 68% in the reactor with the recycling process compared with 34% in a control conventional reactor. Biogas production was intensified from 0.3 L/g of influent volatile solids (VS) in the control reactor up to 0.35 L/g VS. In addition, the recycling process improved the dewatering properties of digested sludge.     

Membrane separation of indigenous noroviruses from sewage sludge and treated wastewater.

In this study, feasibility of membrane separation for the removal of indigenous noroviruses (NVs) is evaluated. The indigenous NV gene was never detected from ultrafiltration (UF) permeates of sewage sludge and treated wastewater. Indigenous NV gene was also not detected from permeates of sewage sludge and treated wastewater by microfiltration (MF) with a pore size of 0.1 microm (MF0.1). Even though the pore size of MF (0.1 microm) was much larger than the diameter of virus particle (approximately 30-40nm), more than 4-log10 reduction value (LRV) at maximum was achieved by membrane separation with MF0.1. NV genes were often detected from permeates of sewage sludge and treated wastewater by MF with a pore size of 0.45 microm (MF0.45), although the maximum log10 reduction values were more than 3.59 for sewage sludge and more than 2.90 for treated wastewater. It is important to verify factors determining the removal efficiency of viruses with MF membranes.     

Enhanced heavy metals removal without phosphorus loss from anaerobically digested sewage sludge

Heavy metals removal without phosphorus loss from anaerobically digested sewage sludge was investigated by conducting batch experiments using hydrogen peroxide and/or iron sulphate under acidified conditions at pH 3. The addition of hydrogen peroxide to the sludge improved the elution efficiencies of As, Cd, Cu and Zn with phosphorus loss from the sludge. The optimum initial concentrations of hydrogen peroxide were. Respectively. 0.1% for As, Cd, Mn and Zn and 0.5% for Cu and Ni. The combined process of 0.1% hydrogen peroxide and 1 g Fe/L ferric sulphate enhanced the initial elution rate of Cu and Cr compared to the addition of either ferric sulphate or hydrogen peroxide, indicating that oxidants stronger than hydrogen peroxide were produced in the sludge. Furthermore, the combined process immobilised phosphorus in the sludge due to co-precipitation with ferric hydroxide or precipitation as ferric phosphate. It was concluded that there is a possibility that the combined process could remove heavy metals effectively without phosphorus loss from anaerobically digested sewage sludge.     

Reuse of treated wastewater and sewage sludge for fertilization and irrigation

The objective of the present work was to assess the short-term potential of treated wastewater and sewage sludge for ornamental lawn fertilization and irrigation. A field experiment was performed and the following treatments were considered: sewage sludge application + irrigation with public water; sewage sludge application + irrigation with treated wastewater; irrigation with public water; irrigation with treated wastewater (TW). Irrigation with treated wastewater showed a positive effect on lawn installation through higher growth of grass (1,667 cm) and higher dry matter yield (18,147 g m(-2)). These results represent a significant increase in the grass yield compared with public water irrigation. The grass height (2,606 cm) and dry matter yield (23,177 g m(-2)) increased even more, when sewage sludge produced in the wastewater treatment plant (WWTP) was applied to soil, which proves once more its benefits as an organic fertilizer. At the end of the experiment, an increase of some soil parameters (pH, electrical conductivity, organic matter, Ca2+, Na+, K+, Mg2+ and NH4+) was observed, indicating that treated wastewater irrigation can cause a soil sodization. This short-term study indicated that use of treated wastewater and sewage sludge for ornamental lawn fertilization and irrigation is an environmentally sustainable option for re-use of the WWTP by-products.     

污水污泥高温与中温厌氧消化对比研究

研究了不同HRT条件下污泥高温(50℃)厌氧消化效果,并与中温(35℃)厌氧消化效果进行对比分析。结果表明,与中温条件相比,高温厌氧消化对有机物的去除率显著提高;高温厌氧消化沼气产量高于中温,但沼气产率差异并不明显(1.13~1.25L/gVS去除);高温和中温厌氧消化系统运行稳定性良好,挥发酸/碱度比值仅为0.02~0.03;高温和中温厌氧消化出泥的毛细吸水时间(CST)均增加,并且高温消化污泥的CST高于中温消化污泥,厌氧消化过程可能导致污泥脱水性能变差。     

Membrane-coupled anaerobic digestion of municipal sewage sludge.

Membrane-coupled anaerobic digestion utilizes a concept of simultaneous sludge digestion and thickening. Membranes may successfully be applied to eliminate the need for thickening polymers and avoid their likely inhibitory effect on anaerobic biomass. A 550 L completely mixed anaerobic digester was operated under mesophilic conditions (35 degrees C). Two ultrafiltration membrane systems were evaluated for their potential in membrane-coupled anaerobic digestion: vibrating and cross flow. A volatile solids reduction of 590% was achieved at an average mixed liquor suspended solids concentration of 1.8%. The substrate utilization rate was 1.3 d(-1). The vibrating membrane operated at a flux of 1.6-2.0 m3/m2-d and the tubular membrane fluxes in the range 3.4-3.6 m3/m2-d.     

Production of thermostable protease enzyme in wastewater sludge using thermophilic bacterial strains isolated from sludge.

The volume of sludge produced annually is very high and poses serious disposal problems. The traditional methods of sludge disposal produce secondary pollutants. Therefore, the alternate or suitable solution is reuse of sludge in an ecofriendly approach. Biotechnology is an interesting tool to add value to the processes involved in wastewater and wastewater sludge disposal/reuse. In this context, a study was carried out on thermophilic bacterial strains that produce thermostable proteases. The bacterial strains were first isolated from municipal wastewater sludge. In contrast to the conventional strains used in industries, like Bacillus sp., the new strains were Gram-Negative type. In semi-synthetic medium, a maximal protease activity of 5.25 IU/ml (International Unit per ml) was obtained at a pH of 8.2 and at a temperature of 60 degrees C, which is higher than the stability temperature of 37 degrees C for a similar protease obtained from the conventional producer Bacillus licheniformis. Moreover, growth and protease activity of the strains were tested in wastewater sludge. It is expected that the complexity of sludge could stimulate/enhance the protease production and their characteristics. In conclusion, reuse of wastewater sludge will help to reduce their quantity as well as the value-added products produced will replace chemical products used in industries.     

污泥碱解发酵液用于生活污水脱氮 除磷的效果研究

为了减轻水体富营养化程度,提高污水的脱氮除磷效果,并解决污泥减量化和资源化问题,本研究将碱预处理的污泥进行厌氧发酵产酸,并将发酵液作为污水脱氮除磷的外加碳源。研究结果表明：投加污泥发酵液后,出水氨氮浓度为0.3~0.5 mg/L,总磷浓度为0.5 mg/L,与未投加污泥发酵液相比分别降低了1.7~2.3 mg/L和3~4 mg/L。     

污水污泥中重金属形态分析研究

采用stover连续提取方法对沈阳市北部污水处理厂的压缩污泥进行重金属提取,并对污泥中Cu、Zn、Cd、Mn、Ni和Pb等重金属之类的形态分布进行分析。结果表明:Cu主要以金属硫化物的形态存在,约占总含量的90.46%;Zn和Mn的形态分布主要为碳酸盐结合态、有机结合态和金属硫化物,Zn的以上三种形态约占总含量的99.11%,而Mn有机结合态约占总含量的52.89%;Cd和Ni主要以碳酸盐结合态、金属硫化物和可交换态形态存在,其中Cd的碳酸盐结合态约占总量的46.77%,Ni的以上三种形态约占其总量的95.02%;Pb以碳酸盐结合态为主要形态,约占总量的99.90%。     

Dynamic of lead speciation in sewage sludge composting.

A large-scale sewage sludge composting experiment was conducted to develop an understanding of changes that occur to Pb chemical speciation, distribution and bio-availability during the course of composting. The four-stage Tessier sequential extraction method was employed to investigate the dynamics of heavy metal Pb speciation (exchangeable, bound to carbonates, bound to Fe-Mn oxides, bound to organic matter and sulphides, residual) during the course of sewage sludge composting. The concentrations of the total Pb and the five Pb fractions concentrations were increased during the whole stage of compost. However, the percentages of Pb distribution with respect to total Pb were changed in the following manner: exchangeable, bound to Fe-Mn oxides and bound to carbonates Pb with respect to total Pb were increased, while the percentages of bound to organic matter and sulphides, and residual Pb with respect to total Pb were decreased during composting. The data showed that the quantity of Pb in the less toxic portion, such as consisting of organic matter and sulphides bound and residual Pb, was increased, and that the contamination and bio-availability of heavy metal Pb in sewage sludge was reduced during the composting process.     

Heavy metals removal from contaminated sewage sludge by naturally fermented raw liquid from pineapple wastes.

The large amount of unutilised pineapple wastes produced every year in tropical countries, particularly in Thailand, adds to the existing environmental pollution problems of the country. This study investigated the utilisation of pineapple wastes to treat another form of waste (sludge) from wastewater treatment facilities in Thailand. Laboratory scale studies were carried out to determine the potential of using naturally fermented raw liquid from pineapple wastes as a source of citric acid in the extraction of Cr, Cu, Pb, Ni and Zn from anaerobically digested sewage sludge. Results of the leaching study revealed its effectiveness in extracting Zn (at 92%) at pH 3.67 and a short leaching time of only 2 h, and Ni at almost 60% removal at the same leaching time. Chromium removal was also high at almost 75% at a longer leaching time of 11 days. Variation in metal removal efficiencies may also be attributed to the forms of metals in sludge, with metals predominantly in the exchangeable and oxidisable phases showing ease of leachability (such as Zn). Compared to citric acid, at pH approaching 4.0, naturally fermented raw liquid seemed to be more effective in the removal of Zn and Cu at the same leaching time of 2 h, and Cr at a longer leaching time of 11 days. The pineapple pulp, which is a by-product of the process, can still be used as animal feed because of its high protein content.     

Adsorption kinetics of Escherichia coli and Staphylococcus aureus on single-walled carbon nanotube aggregates

Batch adsorption studies to determine adsorption kinetics of Escherichia coli (E.coli) K12 and Staphylococcus aureus (S.aureus) SH 1000 bacterial cells on single-walled carbon nanotube aggregates were performed at two different initial concentrations. The diffusivity of E. coli cells in single-walled carbon nanotube aggregates obtained was 6.54 x 10(-9) and 8.98 x 10(-9) cm(2)/s, whereas that of S. aureus was between 1.00 x 10(-7) and 1.66 x 10(-7) cm(2)/s respectively. In addition to batch adsorption studies, electron microscopy studies were also conducted. The results suggest that diffusion kinetics of bacterial cells is concentration dependent as well as bacteria dependent. Diffusivity of S. aureus is two orders of magnitude greater than E. coli cells. This proves to be beneficial from an adsorption perspective where it is desired to filter microorganisms (water pretreatment and wastewater post treatment) and from nanotube biosensor perspective where it is desired to simultaneously capture and detect biothreat agents in a shorter span of time.     

Genotyping of single Cryptosporidium oocysts isolated from sewage and river water.

The study was designed to genotype individual Cryptosporidium oocysts using an 18S rRNA gene-based semi-nested PCR and direct sequencing procedure. Positive PCR amplification was observed in all single C. parvum HNJ-1 oocyst samples tested. Semi-nested PCR and direct sequencing was applied to Cryptosporidium oocysts isolated from sewage and river water. The procedure could genotype 54% of FITC-stained single oocysts isolated from sewage and 32% from river water. The predominant genotype in both sewage and river water was C. parvum genotype 1, accounting for 33 and 25%, respectively, of all the FITC-stained intact Cryptosporidium oocysts present.