Thermodynamic Assessment of the ZrO2─YO1.5 System

An optimal set of thermodynamic functions for the ZrO₂─YO_1.5 system are obtained using phase diagram and thermodynamic data. The liquid is described by a subregular solution model. Both cubic ZrO₂ and YO_1.5 solid solutions are regarded as one cubic solution, which is also treated as a subregular solution. The ordered Zr₃Y₄O₁₂ phase is treated as a stoichiometric compound. A regular solution model is applied to the other solid solutions. Tentative equilibrium boundaries between monoclinic and tetragonal ZrO₂ solid solutions are evaluated from information about the T ₀ line. The calculated phase diagram and thermodynamic functions agree well with experimental data.     

Subsolidus Phase Equilibria of the MgO─V2O5─SiO2 System

The subsolidus phase equilibria of the MgO─V₂O₅─SiO₂ system was studied by solid-state reaction and powder X-ray diffractometry. The resulting ternary is discussed with respect to corrosion of magnesia- and silica-containing refractories by vanadium-containing fuels.     

Zirconium–Hafnium Interdiffusion in Polycrystalline Fluorite-Cubic CeO2─ZrO2─HfO2 Solid Solution

Zr–Hf interdiffusion was studied in the temperature range of 1650° to 1850°C in air for polycrystalline fluorite-cubic systems of 90CeO₂·10(Zr_{1- x} Hf _x )O₂ and 60CeO₂·40(Zr_{1- x} Hf _x )O₂. Lattice and grain-boundary diffusion parameters were calculated from the Zr–Hf concentration distributions by using the grain-boundary diffusion equation of Oishi and Ichimura. The cation iattice diffusivity was close to that in the fluorite-cubic Y₂O₂-ZrO₂ solid solution.     

Color and Selected Properties of PbO─BiO1.5─GaO1.5 Glasses

The density; molar volume; thermal expansion coefficient; dissolution rate in water, HC1, and NaOH; glass transition and crystallization temperatures; and the absorption edge in the ultraviolet-visible and infrared were measured for PbO─BiO1.5─GaO1.5 glasses. The range of compositions investigated was x PbO (100 − (x + y) )BiO_1.5. yGaO_1.5 for x between 20 and 60 cat% and y of 20, 25, 30, and 35 cat%. The glass-forming tendency increased with increased GaO_1.5 and decreased with increased PbO or BiO_1.5. The compositional dependence of these properties was consistent with the weight, size, charge, and bond strength of the cations. The Ga^{3 +} ions in these glasses are believed to act primarily as network-forming cations, whereas the majority of the Bi³⁺ and Pb²⁺ ions behave as network-modifying cations. It is suggested that a small friction of the lead ions are present as Pb⁴⁺. Depending upon melting conditions, these glasses ranged in color from brown to yellow. Various attempts, including containerless melting, were made to obtain colorless glasses, but no conditions were found which totally eliminated the color. The least color (pale yellow) was obtained when the glasses were melted in an air or nitrogen atmosphere in an alumina or gold crucible.     

Study of Phase Formation in Spray Pyrolysis of ZrO2 and ZrO2─;Y2O3 Powders

The phase composition of fine ZrO₂ and ZrO─Y₂O₃ powders prepared by the process of spray pyrolysis was detected using XRD. An interesting phenomenon has been observed. In this paper, the influence of the temperature and carrier gas flux on the phase composition of as-prepared powders is described. The formation and transformation mechanisms of the powder phase in the process are also discussed.     

Thermodynamic Analysis of the Cubic–Tetragonal Phase Equilibria in the System ZrO2–YO1.5

The cubic-tetragonal (c-t) phase equilibria in the system ZrO₂-YO_1.5 are thermodynamically analyzed from Landau's phenomenological theory. The calculated c-t two-phase field is depicted as a miscibility gap with a sharp maximum and the spinodal region as originally predicted by Hillert and Sakuma. However, the observed c-t two-phase field and the spinodal region are better described by the present model. In addition, this model can be used to discuss the nature of the c-t diffusionless transformation from the order parameter in contrast with the original model. The predicted change in the tetragonality of t-ZrO₂ with YO_1.5 content is slightly different from that in the c/a axial ratio estimated from X-ray diffraction analysis. The displacement of cations and anions may not take place simultaneously during the c-t transformation.     

Thermal Analysis of a SiO2─Al2O3─CaO─CaF2 Glass

A SiO₂─Al₂O₃─CaO─CaF₂ ionomer glass was investigated using thermal analysis, X-ray diffraction, and scanning electron microscopy. The purpose of this investigation was to control the susceptibility of the glass to acid attack. The differential thermal analysis trace exhibited a sharp glass transition at about 645°C and two exotherms. The first exotherm corresponded to liquid–liquid phase separation followed by crystallization of fluorite. The second, much larger, exotherm was the result of crystallization of the remaining glass phase to form anorthite. Prolonged heat treatment below the glass-transition temperature demonstrated that crystallization of fluorite can occur without prior liquid–liquid phase separation.     

Effect of Carbon Reduction on the Properties of 13 mol% Tio2─3 mol% Y2O3─84 mol% ZrO2

Fully tetragonal and sintered 13 mol% TiO₂─3 mol% Y₂O₃─84 mol% ZrO₂ was thermally treated at 1300°C for 1 h in argon in the presence of carbon. No phase changes occurred on the as-received surface and in the bulk of the material, but t → m transformation occurred on polished surfaces under reducing conditions, and it resulted in increased fracture toughness, Young's modulus, and modulus of rigidity. Deoxidation of the system occurred and 0.174 wt% of carbon was found in the sample. This seemed to stabilize the tetragonal phase.     

Grain-Size Distribution in Al2O3─ZrO2 Generated by High-Temperature Annealing

Grain-size distribution in various Al₂O₃─ZrO₂ (2.5 mol% Y₂O₃) ceramics during high-temperature annealing was examined. In alumina-rich alloys, the grain size of major and minor phases was very different, while grain size was almost uniform in zirconia-rich alloys. This difference in grainsize distribution was related to the difference in grain growth rate of the major phase and to the effectiveness of grain-boundary pinning by minor-phase grains.     

Subsolidus Relations in the La2O3─CuO─CaO Phase Diagram and the La2O3─CuO Binary Join

The phase diagram for the CuO-rich part of the La₂O₃─CuO join was redetermined. La₂Cu₂O₅ was found to have a lower limit of stability at 1002°± 5°C and an incongruent melting temperature of ∼1035°C. LagCu₇O₁₉ had both a lower (1012°± 5°C) and an upper (1027°± 5°C) limit of stability. Subsolidus phase relations were studied in the La₂O₃─CuO─CaO system at 1000°, 1020°, and 1050°C in air. Two ternary phases, La_1.9Ca_1.1Cu₂O_5.9 and LaCa₂Cu₃O_8.6, were stable at these temperatures, with three binary phases, Ca₂CuO₃, CaCu₂O₃, and La₂CuO₄. La₂Cu₂O₅ and La₈Cu₇O₁₉ were stable only at 1020°C, and did not support solid-solution formation.     

Influence of ZrO2 Grain Size and Content on the Transformation Response in the Al2O3─ZrO2 (12 mol% CeO2) System

Based on experimental and modeling studies, the rate of increase in the martensite start temperature M _s for the tetragonal-to-monoclinic transformation with increase in zirconia grain size is found to rise with decrease in ZrO₂ content in the zirconia-toughened alumina ZTA system. The observed grain size dependence of M _s can be related to the thermal expansion mismatch tensile (internal) stresses which increase with decrease in zirconia content. The result is that finer zirconia grain sizes are required to retain the tetragonal phase as less zirconia is incorporated into the alumina, in agreement with the experimental observations. At the same time, both the predicted and observed applied stress required to induce the transformation are reduced with increase in the ZrO₂ grain size. In addition, the transformation-toughening contribution at temperature T increases with increase in the M _s temperature brought about by the increase in the ZrO₂ grain size, when T > M _s. In alumina containing 20 vol% ZrO₂ (12 mol% CeO₂), a toughness of ∼10 MPa. √m can be achieved for a ZrO₂ grain size of ∼2 μm ( M _s∼ 225 K). However, at a grain size of ∼2 μm, the alumina–40 vol% ZrO₂ (12 mol% CeO₂) has a toughness of only 8.5 MPa. √m ( M _s∼ 150 K) but reaches 12.3 MPa. ∼m ( M _s∼ 260 K) at a grain size of ∼3 μm. These findings show that composition (and matrix properties) play critical roles in determining the ZrO₂ grain size to optimize the transformation toughening in ZrO₂-toughened ceramics.     

Subsolidus Phase Relationships in Part of the System Si,Al,Y/N,O: The System Si3N4─AIN─YN─Al2O3─Y2O3

The subsolidus phase relationships in the system Si,Al,Y/N,O were determined. Thirty-nine compatibility tetrahedra were established in the region Si₃N₄─AIN─Al₂O₃─Y₂O₃. The subsolidus phase relationships in the region Si₃N₄─AIN─YN─Y₂O₃ have also been studied. Only one compound, 2YN:Si₃N₄, was confirmed in the binary system Si₃N₄─YN. The solubility limits of the α'─SiAION on the Si₃N₄─YN:3AIN join were determined to range from m = 1.3 to m = 2.4 in the formula Y _{m /3}Si_{12- m} Al _m N₁₆. No quinary compound was found. Seven compatibility tetrahedra were established in the region Si₃N₄─AIN─YN─Y₂O₃.     

Chemical Control of the Grain-Boundary Migration of SrTiO3 in the SrTiO3─BaTiO3─CaTiO3 System

The grain-boundary migration induced by chemical instability has been studied in SrTiO₃. Sintered SrTiO₃ has been packed with various BaTiO₃/CaTiO₃ powder mixtures and annealed at 1400°C for various times. At the surface region of most SrTiO₃ specimens, the grain boundary has migrated with the diffusion of Ba and Ca ions. The ratio of Ba and Ca ions present in the migrated region varies with the depth from the surface and the packing-powder composition, and is not equal to the cation ratio of packing powder. When the Ba/Ca ratio of packing powder is 1, cessation of migration has been observed. The composition of the area without migration is estimated to be approximately equal to the composition for the matching of crystal lattices between the original grain (SrTiO₃) and the layer formed by diffusion of Ba and Ca ions. The coherency strain energy induced by diffusion of solute atoms is believed to be the major driving force for the grain-boundary migration of SrTO₃ under the chemical instability. The grain-boundary migration can be accordingly controlled by lattice parameter change and matching.     

Stable and Metastable Phase Relationships in the System ZrO2–ErO1.5

Stable and metastable phase relationships in the system ZrO₂–ErO_1.5 were investigated using homogeneous samples prepared by rapid quenching of melts and by arc melting. The rapidly quenched samples were annealed in air for 48 h at 1690°C or for 8 months at 1315°C. Two tetragonal phases ( t - and t '-phases) were observed after quenching samples heated at 1690°C to a room temperature, whereas one t -phase and cubic ( c -) phase were found in those treated at 1315°C. Since the t '-phase is obtained through a diffusionless transformation during cooling from a high-temperature c -phase, t - and c -phases can coexist at high temperature. The t - and c -phases field spans from 4 to 10 mol% ErO_1.5 at 1690°C and from 3 to 15 mol% ErO_1.5 at 1315°C. The equilibrium temperature T ^t-m ₀ between the t - and monoclinic ( m -) phases estimated from A_s and M_s temperatures decreased with increasing ErO_1.5 contents.     

Phase Relationships in the Ternary System CaO─P2O5─H2O at 25°C

The portion of the stable phase diagram for the ternary system CaO-P₂O₅-H₂O involving calcium phosphate phases more basic than Ca(H₂PO₄)₂ has been constructed. Construction involves plotting concentrations as their fifth roots to allow phases having very different solubilities to be represented on a single diagram. Hydroxyapatite is shown to be congruently soluble. The stability region for hydroxyapatite includes compositions having Ca/P ratios extending between 1.5 and 1.67. Calcium-deficient hydroxyapatite forms a stable invariant point with CaHPO₄ and a metastable invariant point with CaHPO₄. 2H₂O. Inspection of the diagram indicates that the compounds CaHPO₄ and CaPHO₄.2H₂O dissolve incongruently. Incongruent dissolution of either CaHPO₄ or CaHPO₄.2H₂O results in the formation of hydroxyapatite during the dissolution process. Such incongruency between these compounds and hydroxyapatite influences their microstructural relationships.     

Phase Equilibria and Ordering in the System ZrO2-Y2O3

The phase diagram for the system ZrO₂-Y₂O₃ was redetermined. The extent of the fluorite-type ZrO₂-Y_zO₃ solid solution field was determined with a high-temperature X-ray furnace, precise lattice parameter measurements, and a hydrothermal technique. Long range ordering occurred at 40 mol% Y₂O₃ and the corresponding ordered phase was Zr₃Y₄OL₁₂. The compound has rhombohedra1 symmetry (space group R 3), is isostructural with UY₆O_l2 and decomposes above 1250±50°C. The results indicate that the eutectoid may occur at a temperature <400°C at a composition between 20 and 30 mol% Y₂O₃ Determination of the liquidus line indicated a eutectic at 83± 1 mol% Y₂O₃ and a peritectic at 76 ± 1 mol% Y₂O₃.     

Subsolidus Phase Relations in the Pseudoternary System ZrO2-YO1.5-CrO1.5 in Air

The pseudoternary system ZrO₂-YO_1.5CrO_1.5 was studied between 1300° and 1600C in air by °a quenching method. No ordered phase of the type ZrY₆O₁₁ was detected, but an ordered Zr₃Y₄O₁₂ phase at 1300°C and YCrO₃ were observed as intermediate compounds. Solid solutions ofZrO₂ and YO_1.5 coexisting with CrO_1.5 and/or YCrO₃ formed; the apex occurred between 26.5 and 27.5 wt% YO_1.5 for the cubic ZrO₂+CrO_1.5+YCrO₃, three-phase region; CrO_1.5 is slightly soluble in ZrO₂(ss).     

Spherulitic Growth of Apatite in a MgO─CaO─SiO2─P2O5 Glass

Differential thermal analysis, X-ray diffraction, scanning electron microscopy with energy dispersive X-ray analysis, and transmission electron microscopy were used to study the crystallization of a glass with a composition of 11.2 wt% MgO, 40.5 wt% CaO, 33.3 wt% SiO₂, and 15 wt% P₂O₅. A two-phase "composite," which was composed of apatite and an intermediate phase (H-phase), was formed under appropriate heat-treatment conditions. The spherulitic morphology of apatite phase transformed from "open sheaf" into ellipsoidal as samples were heated to a higher temperature. These phenomena were due to the intermediate H-phase becoming unstable at this temperature so that the retardation effect on the apatite dendritic growth disappeared.     

Li2O─SiO2─Al2O3─MeIIO Glass-Ceramic Systems for Tile Glaze Applications

In order to verify the possibility of using glass-ceramic materials as tile coatings, the devitrification processes of three industrial formulations belonging to the Li₂O─Al₂O₃─SiO₂ glass-ceramic system were investigated by differential thermal analysis, X-ray diffractometry, scanning electron microscopy, and IR spectroscopy. Compositional variations were made by addition of large amounts of MgO or CaO or PbO (ZnO) oxides as well as through smaller additions of other oxides. In these systems the surface crystallization contributes appreciably to the bulk crystallization mechanism. All the systems investigated show a high tendency toward crystallization even at very high heating rates, developing a very close network of interlocked crystals of synthetic β-spodumene-silica solid solutions (LiAlSi₄O₁₀). The results of this research are expected to establish the conditions under which these glass-ceramic systems can be practically used as tile glazes.