含硫多吡啶配体及其过渡金属配合物的合成、表征与结构

本文报道1个含硫多吡啶配体5,5′-二(2-吡啶硫)甲基-2,2′-联吡啶(L)及其3个过渡金属配合物{[AgL](ClO₄)}_∞ (1),[CuLCl₂] (2)和[Mn(L)₃](ClO₄)₂(H₂O)_0.5 (3)的合成及结构表征     

基于半刚性四面体四齿配体构筑的Zn(Ⅱ)/Cd(Ⅱ)配位聚合物及其性质

在水热的条件下, 利用四(4-吡啶氧甲基)甲烷(L₁)或四(3-吡啶氧甲基)甲烷(L₂)、1, 4-萘二甲酸(1, 4-NDC)和d¹⁰金属离子发生自组装反应合成了2个化合物{[Cd₂(L₁)(1, 4-NDC)₂]·2H₂O}_n (1)和{[Zn₂(L₂)(1, 4-NDC)₂]·DMF·3H₂O)}_n (2)。单晶结构表明化合物1是通过L1配体与一维链[Cd(1, 4-NDC)]_n相连构建而成的三维骨架化合物, 而化合物2是一对螺旋链与另外的一维链相互垂直交联而形成二维网络结构。更为重要的是, 通过引入2种不同空间位阻的配体, 研究了辅助配体对金属有机配位聚合物结构多样性的影响。另外, 它们的荧光性质也做了相应的探讨。     

基于半刚性四面体四齿配体构筑的Zn(Ⅱ)/Cd(Ⅱ)配位聚合物及其性质

在水热的条件下,利用四(4-吡啶氧甲基)甲烷(L₁)或四(3-吡啶氧甲基)甲烷(L₂)、1,4-萘二甲酸(1,4-NDC)和d¹⁰金属离子发生自组装反应合成了2个化合物{[Cd₂(L₁)(1,4-NDC)₂]·2H₂O}_n(1)和{[Zn₂(L₂)(1,4-NDC)₂]·DMF·3H₂O)}_n(2)。单晶结构表明化合物1是通过L₁配体与一维链[Cd(1,4-NDC)]_n相连构建而成的三维骨架化合物,而化合物2是一对螺旋链与另外的一维链相互垂直交联而形成二维网络结构。更为重要的是,通过引入2种不同空间位阻的配体,研究了辅助配体对金属有机配位聚合物结构多样性的影响。另外,它们的荧光性质也做了相应的探讨。     

基于2-甲基-8-羟基喹啉的镝单分子磁体的晶体结构及磁性

以2-甲基-8-羟基喹啉(HL)为配体合成了2个含有镝离子的配位化合物[Dy₂L₄(HL)₄(H₂O)₂](ClO₄)₂·2H₂O(1)和[Dy₂L₆(C₂H₅OH)]·H₂O(2)。虽然在这两个配位化合物中配体都是2-甲基-8-羟基喹啉,但其参与配位的方式不同。这导致2个化合物中镝离子所处的配位环境不同,进而对化合物的磁性产生了影响。     

两个基于β-二酮配体构筑的银配位聚合物的合成和晶体结构

以配体 3-((5-(3-吡啶基)-2-(1，3，4-噁二唑基))硫代)-2，4-戊二酮(L₁)与 AgSbF₆进行配位反应，得到配位聚合物{[Ag(L₁)₂]SbF₆}_n (1)；以配体3-((5-(4-吡啶基)-2-(1，3，4-噁二唑基))硫代)-2，4-戊二酮(L₂)与AgCF₃SO₃进行配位反应，得到配位聚合物[Ag(L₂)(CF₃SO₃)]_n (2)。并通过粉末 X射线衍射、红外光谱、元素分析和单晶 X射线衍射对配合物的结构进行了表征。在固体状态下，配位聚合物1和2都形成1D链状结构。     

镍螺旋化合物及其杂银配位聚合物的设计合成与结构

采用两个易扭转异构的双三齿有机配体，双吡啶二甲基-6,6′-二酰肼-2,2′-连吡啶(H₂L¹)和双吡啶二乙基-6,6′-二酰肼-2,2′-连吡啶(H₂L²)，和金属镍离子组装得到2个金属螺旋体(helicate)，Ni₂(HL¹)₂(PF₆)(BF₄)(CH₃OH)(H₂O)₂ (1)和Ni₂(HL²)(H₂L²)(ClO₄)₃(C₂H₅OH)(CH₃OH)H₂O)₃ (2),并测定了它们的晶体结构。同时由配体H₂L³出发,通过逐级组装的方法,得到一个镍-银杂金属的配位聚合物Ni₂Ag₂(HL³)₂(ClO₄)₂(CH₃CN)₃ (3)。单晶结构表明，配位聚合物3中配体H₂L³首先与镍离子组装成分子盒化合物(molecular box)，该结构单元进一步通过Ag离子与分子盒外围N原子配位，使分子盒互相串连成一维配位聚合物3，分子盒聚集体沿c方向伸展成一维链结构，链与链之间相互平行，进一步堆积成二维孔道结构。     

两个基于β-二酮席夫碱配体构筑的银配合物的合成、晶体结构和荧光性质

在常温的条件下,分别将2个双β-二酮席夫碱配体与银盐进行配位反应得到2个银配合物,{[Ag(L₁)](SbF₆)}_n(1)和[Ag₂(L₂)2₂](BF₄)₂(2)(L₁=1,3-bis(4-methylamino-pentan-2-one)phenyl,L₂=1,3-bis(3-methylamino-1-phenyl-butan-1-one)phenyl),并通过元素分析、红外光谱、粉末X射线衍射分析、单晶X射线衍射等对其结构进行了表征。结构分析表明,在配合物1中,银离子与配体L₁中的2个碳原子和2个氧原子配位,形成一维链状结构,而配合物2中银离子与L₂配体中的2个氧原子和2个碳原子配位,最终得到双核二聚体结构。化合物1和2都通过阴离子与结构单元之间的C-H…F作用,最终形成三维超分子结构。此外,我们还研究了化合物1、2以及配体的荧光性质。     

两个一维配位聚合物的合成、晶体结构、电化学及光学性质

合成了2个新的Robson大环配位聚合物{[Mn₂L¹(1,4-bix)₂](ClO₄)₂·5H₂O·DMF}_n(1)和{[Cu₂L²(1,4-bix)](ClO₄)₂}_n(2)(H₂L¹和H₂L²分别为1,3-丙二胺与2,6-二甲酰基-4-氟苯酚和2,6-二甲酰基-4-氯苯酚通过[2+2]缩合的产物)。2个配合物通过1,4-二(1,2,4-三唑-1-甲基)苯(1,4-bix)桥连大环单元形成一维链状结构。配合物的HOMO-LUMO能带间隙通过循环伏安法、紫外-可见漫反射光谱进行了测定,结果表明有较低的能带间隙。     

两个含吡啶取代苯酚配体的铜配合物的合成与晶体结构

以2-[N,N-二(2-吡啶甲基)氨甲基]-6-醛基-4-甲基苯酚(L)为配体,合成了2个单核铜配合物[CuL(CH₃CN)(ClO₄)]ClO₄(1)和cis-[CuL(NCS)₂]·0.5C₄H₈O₂(2),对它们进行了紫外、红外、质谱、元素分析和单晶结构表征。2个配合物都属于单斜晶系,每个铜均为扭曲的八面体构型。作为四齿配体,L通过2个吡啶氮原子,1个叔胺氮原子和1个酚氧原子和铜离子配位。在配合物1中,乙腈和1个ClO₄参与配位,而在配合物2中2个硫氰根离子为顺式配位。     

新型一维双席夫碱铜(Ⅰ)配合物的合成、结构及荧光性质(英)

在室温下，[Cu(PPh₃)₂(CH₃CN)₂]ClO₄和双席夫碱配体1，2-双(3′-吡啶基亚甲基氨基)乙烷(L)反应得到一个新型化合物[Cu(PPh₃)(L)](ClO₄) (1)。结构分析表明该化合物属于单斜晶系，空间群为P2₁ /n，晶胞参数为a=1.696 6(16)     

Cleavage of C-S bonds with the formation of a tetranuclear Cu(I) cluster

The treatment of a ligand, 2,6-bis((4-(pyridin-2-yl)pyrimidin-2-ylthio)methyl)-4-chlorophenol (ClPPT2), with cuprous chloride under a weak base condition led to the formation of a neutral CuI4-centered cluster [Cu4(PPT2)4], whose X-ray diffraction analysis indicated that C-S bonds of the ligand were cleaved in the course of the reaction. To explain the C-S bond cleavage, a reasonable mechanism has been proposed. In support of it, four additional ligands, 2,6-bis((4-(pyridin-2-yl)pyrimidin-2-ylthio)methyl)-4-methylphenol (MePPT2), 2,6-bis((4-(pyridin-3-yl)pyrimidin-2-ylthio)methyl)-4-methylphenol (MePPT3), 2,6-bis((4-(pyridin-3-yl)pyrimidin-2-ylthio)methyl)-4-chlorophenol (ClPPT3), and 5-((4-(pyridin-3-yl)pyrimidin-2-ylthio)methyl)-2-hydroxybenzaldehyde (HBPPT2) were further tested to undertake the analogous reaction, and the cleaved products in these experiments were detected by electrospray ionization mass spectrometry techniques to clarify the process.     

Unique example of flexible phenol coordination in mononuclear manganese compounds

The synthesis and characterization of six novel mononuclear Mn(II) and Mn(III) complexes are presented. The tripodal ligands 2-((bis(pyridin-2-ylmethyl)amino)methyl)-4-nitrophenol (HL1), 2-[[((6-methylpyridin-2-yl)methyl)(pyridin-2-ylmethyl)amino]methyl]-4-nitrophenol (HL2), (2-pyridylmethyl)(6-methyl-2-pyridylmethyl)(2-hydroxybenzyl)amine (HL3) and 2-((bis(pyridin-2-ylmethyl)amino)methyl)-4-bromophenol were used. All ligands provide an N3O donor set. The compounds [Mn(II)(HL1)Cl2].CH3OH (1), [Mn(III)(L1)Cl2] (2), [Mn(II)(HL2)(EtOH)Cl2] (3), [Mn(II)(HL3)Cl2].CH3OH (4), [Mn(III)(HL4)Br2] (5) and [Mn(III)(L1)(tcc)] (6), with tcc = tetrachlorocatecholate dianion, were synthesized and characterized by various techniques such as X-ray crystallography, mass spectrometry, IR and UV-vis spectroscopy, cyclic voltammetry, and elemental analysis. Compound 1 crystallizes in the triclinic space group P1, compounds 2, 3 and 4 were solved in the monoclinic space group P2(1)/c, whereas the structure determination of and succeeded in the orthorhombic space groups Pbca and P2(1)2(1)2(1), respectively. Notably, the crystal structures of 1 and 3 are the first Mn(II) complexes featuring a non-coordinating phenol moiety. Compound 2 oxidizes 3,5-di-tert-butylcatechol to 3,5-di-tert-butylquinone exhibiting saturation kinetics at high substrate concentrations with a turnover number of kcat = 173 h(-1). The electronic influence of different substituents in para position of the phenol group is lined out.     

Coordination polymers from silver(I) and bifunctional pyridyl ligands

Coordination polymers and a macrocycle formed from the reactions between flexible bis(2-pyridyl) ligands and AgCF(3)SO(3) are reported. The type of structure formed depends on the choice of ligand and the stoichiometry of the reaction. When 1 equiv of 1,4-bis(pyridin-2-ylmethoxy)benzene (L2), 4,4'-bis(pyridin-2-ylmethoxy)biphenyl (L4), or bis((4-pyridin-2-ylmethoxy)phenyl)methane (L5) is used, 1D chain coordination polymers held together via Ag-N bonds are generated. When a 2:1 ratio of L2 and silver ion is used, a 2D porous network is formed. The reaction between silver ions with a mixture of ligands (L1 and L2 in 1:1 ratio, L1 = 1,4-bis((pyridin-2-yl-methyl)thio)benzene) results in a novel 1D ABAB type coordination copolymer where L1 and L2 act as a bis-bidentate and a bis-monodentate ligand, respectively. The reaction of 1-(pyridin-2-ylmethoxy)-4-((pyridin-2-yl-methyl)thio)benzene (L3) with silver ions in a 1:1 ratio gives a bimetallic macrocycle rather than a polymeric species. Structural analyses of the polymeric compounds suggest that interactions between the aromatic rings play a significant role in stabilizing the polymeric structures.     

Ruthenium(II) arene complexes with chelating chloroquine analogue ligands: synthesis, characterization and in vitro antimalarial activity

Three new ruthenium complexes with bidentate chloroquine analogue ligands, [Ru(η(6)-cym)(L(1))Cl]Cl (1, cym = p-cymene, L(1) = N-(2-((pyridin-2-yl)methylamino)ethyl)-7-chloroquinolin-4-amine), [Ru(η(6)-cym)(L(2))Cl]Cl (2, L(2) = N-(2-((1-methyl-1H-imidazol-2-yl)methylamino)ethyl)-7-chloroquinolin-4-amine) and [Ru(η(6)-cym)(L(3))Cl] (3, L(3) = N-(2-((2-hydroxyphenyl)methylimino)ethyl)-7-chloroquinolin-4-amine) have been synthesized and characterized. In addition, the X-ray crystal structure of 2 is reported. The antimalarial activity of complexes 1-3 and ligands L(1), L(2) and L(3), as well as the compound N-(2-(bis((pyridin-2-yl)methyl)amino)ethyl)-7-chloroquinolin-4-amine (L(4)), against chloroquine sensitive and chloroquine resistant Plasmodium falciparum malaria strains was evaluated. While 1 and 2 are less active than the corresponding ligands, 3 exhibits high antimalarial activity. The chloroquine analogue L(2) also shows good activity against both the chloroquine sensitive and the chloroquine resistant strains. Heme aggregation inhibition activity (HAIA) at an aqueous buffer/n-octanol interface (HAIR(50)) and lipophilicity (D, as measured by water/n-octanol distribution coefficients) have been measured for all ligands and metal complexes. A direct correlation between the D and HAIR(50) properties cannot be made because of the relative structural diversity of the complexes, but it may be noted that these properties are enhanced upon complexation of the inactive ligand L(3) to ruthenium, to give a metal complex (3) with promising antimalarial activity.     

Transfer hydrogenation via generation of hydride intermediate and base-free alcohol oxidation activity studies on designed ruthenium complexes derived from NNN pincer type ligands

Ruthenium complexes( 1 – 3 ) have been synthesized using pincer-type ligands L¹ = (E)-2-((2-phenyl-2-(pyridin-2-yl)hydrazono)methyl)pyridine, L² = (E)-2-(1-phenyl-2-(1-(pyridin-2-yl)ethylidene)hydrazinyl)pyridine, L³ = (E)-2-(phenyl(2-phenyl-2-(pyridin-2-yl)hydrazono) methyl)pyridine. The molecular structures of all the complexes 1 , 2 and 3 were determined by using single crystal X-ray diffraction. These complexes showed excellent catalytic activities such as transfer hydrogenation and alcohol oxidation. Theoretical calculations have been performed to understand the electronic properties of all the complexes using B3LYP as a function and LANL2DZ as a basis set.     

Self-assembly of 2D-->2D interpenetrating coordination polymers showing polyrotaxane- and polycatenane-like motifs: influence of various ligands on topological structural diversity

A series of mixed-ligand coordination complexes, namely, [Cd 2(bimb) 2(L (1)) 2] ( 1), [Cd(bpimb) 0.5(L (2))(H 2O)] ( 2), [Zn 5(bpib) 2(L (3)) 4(OH) 2(H 2O) 2] ( 3), [Zn(bpib) 0.5(L (4))] ( 4), and [Cd(bib)(L (4))] ( 5), where bimb = 1,4-bis((1 H-imidazol-1-yl)methyl)benzene, bpimb = 1,4-bis((2-(pyridin-2-yl)-1 H-imidazol-1-yl)methyl)benzene, bpib = 1,4-bis(2-(pyridin-2-yl)-1 H-imidazol-1-yl)butane, bib = 1,4-bis(1 H-imidazol-1-yl)butane, H 2L (1) = 4-((4-(dihydroxymethyl)phenoxy)methyl)benzoic acid, H 2L (2) = 4,4'-methylenebis(oxy)dibenzoic acid, H 2L (3) = 3,3'-methylenebis(oxy)dibenzoic acid, and H 2L (4) = 4,4'-(2,2'-oxybis(ethane-2,1-diyl)bis(oxy))dibenzoic acid, have been synthesized under hydrothermal conditions. Their structures have been determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra, and thermogravimetric (TG) analyses. In 1, (L (1)) (2-) anions link the metal-neutral ligand subunits to generate a 2-fold parallel interpenetrating net with the 6 (3) topology. In 2- 4, neutral ligands connect the various metal-carboxylic ligand subunits to give a 2-fold parallel interpenetrating net with (4,4) topology in 2, a 2-fold parallel interpenetrating net with (3,6)-connected topology in 3, and a 3-fold parallel interpenetrating net with (4,4) topology in 4. Compounds 1- 4 display both polyrotaxane and polycatenane characters. Compound 5 is a 5-fold parallel interpenetrating net with (4,4) topology. By careful inspection of these structures, we find that different topological structures showing both polyrotaxane and polycatenane characters have been achieved with increase of the carboxylic ligand length. It is believed that various carboxylic ligands and N-donor ligands with different coordination modes and conformations are important for the formation of the different structures. In addition, the luminescent properties of these compounds are discussed.     

Unique CuI-pyridine based ligands catalytic systems for N-arylation of indoles and other heterocycles

Two pyridine-based ligands (N-((pyridin-2-yl) methyl) pyridin-2-amine) L1 and (N-((pyridin-2-yl) methylene) pyridin-2-amine) L2 are explored in present work which are inexpensive, effective and environmentally benign in their properties. These have been utilized for C-N cross coupling reaction resulting in N-arylation. The N-arylation of indole, imidazole and triazole have been successfully carried out with different aryl and heteroaryl halides using these ligands.     

Rhenium tricarbonyl core complexes of thymidine and uridine derivatives

Thymidine and uridine were modified at the C2' and C5' ribose positions to form amine analogues of the nucleosides (1 and 4). Direct amination with NaBH(OAc)3 in DCE with the appropriate aldehydes yielded 1-{5-[(bis(pyridin-2-ylmethyl)amino)methyl]-4-hydroxytetrahydrofuran-2-yl}-5-methyl-1H-pyrimidine-2,4-dione (L1), 1-{5-[(bis(quinolin-2-ylmethyl)amino)methyl]-4-hydroxytetrahydrofuran-2-yl}-5-methyl-1H-pyrimidine-2,4-dione (L2), and 1-[3-(bis(pyridin-2-ylmethyl)amino)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl]-1H-pyrimidine-2,4-dione (L5), while standard coupling procedures of 1 and 4 with 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid (2) and 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid (3) in the presence of HOBT-EDCI in DMF provided a second novel series of bifunctional chelators: 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid [(3-hydroxy-5-(5-methyl-4-oxo-3,4-dihydro-2H-pyrimidin-1-yl)tetrahydrofuran-2-yl)methyl] amide (L3), 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid [(3-hydroxy-5-(5-methyl-4-oxo-3,4-dihydro-2H-pyrimidin-1-yl)tetrahydrofuran-2-yl)methyl] amide (L4), 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid [2-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-3-yl] amide (L6), and 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid [2-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-3-yl] amide (L7). The rhenium tricarbonyl complexes of L1-L4, L6, and L7, [Re(CO)3(LX)]Br (X=1-4, 6, 7: compounds 5-10, respectively), have been prepared by reacting the appropriate ligand with [NEt4][Re(CO)3Br3] in methanol. The ligands and their rhenium complexes were obtained in good yields and characterized by common spectroscopic techniques including 1D and 2D NMR, HRMS, IR, cyclic voltammetry, UV, and luminescence spectroscopy and X-ray crystallography. The crystal structure of complex 6.0.5NaPF6 displays a facial geometry of the carbonyl ligands. The nitrogen donors of the tridentate ligand complete the distorted octahedral spheres of the complex. Crystal data: monoclinic, C2, a = 24.618(3) A, b = 11.4787(11) A, c = 15.5902(15) A, beta = 112.422(4) degrees , Z = 4, D(calc) = 1.562 g/cm3.     

Adsorption and anticorrosion behavior of 1-((pyridin-2-ylamino)(pyridin-4-yl)methyl)pyrrolidine-2,5-dione on mild steel surface in hydrochloric acid solution

Research on Chemical Intermediates - New Mannich base 1-((pyridin-2-ylamino)(pyridin-4-yl)methyl)pyrrolidine-2,5-dione (SAP) was synthesized, characterized, and investigated as a corrosion...     

Chelate ring size variations and their effects on coordination chemistry and catechol dioxygenase reactivity of iron(III) complexes

The catechol dioxygenase reactivity of iron(III) complexes using tripodal ligands was investigated. Increasing, as well as decreasing, chelate ring sizes in the highly active complex [Fe(tmpa)(dbc)]B(C6H5)4 (tmpa = tris[(2-pyridyl)methyl]amine; dbc = 3,5-di-tert-butylcatecholate dianion), using related ligands, only resulted in decreased reactivity of the investigated compounds. A detailed low-temperature stopped-flow investigation of the reaction of dioxygen with [Fe(tmpa)(dbc)]B(C6H5)4 was performed, and activation parameters of DeltaH++ = 23 +/- 1 kJ mol(-1) and DeltaS++ = -199 +/- 4 J mol(-1) K(-1) were obtained. Crystal structures of bromo-(tetrachlorocatecholato-O,O')(bis((2-pyridyl)methyl)-2-pyridylamine-N,N',N')-iron(III), (mu-oxo)-bis(bromo)(bis((2-pyridyl)methyl)-2-pyridylamine-N,N',N' ',N')-diiron(III), dichloro-((2-(2-pyridyl)ethyl)bis((2-pyridyl)methyl)amine-N,N',N' ',N')-iron(III) and (tetrachlorocatecholato-O,O')((2-(2-pyridyl)ethyl)bis((2-pyridyl)methyl)amine-N,N',N' ',N')-iron(III) are reported.