α,β,γ,δ,ε,η-Bi2O3电子结构和光学性质的第一性原理研究

基于密度泛函理论的CASTEP模块研究了α, β, γ, δ, ε和η-Bi₂O₃晶型, 计算分析了其几何结构、 能带结构、 电子态密度和光学性质. 结果表明, α, ε和η相均为层状结构, 其中, α和ε相为单层—Bi—O—结构, 而η相为双层—Bi—O—结构; β, γ和δ相为—Bi_m—O_n—交错结构, 其中δ相交错尤为密集, 呈现导体特性. 各晶相的导带均由Bi 6p态构成, 价带由O_2p态起主导作用. 电势电位分析结果表明, 6种晶相价带电位均在H₂O/O₂之下, 具有强氧化能力, 与实验报道的光催化氧化能力大小顺序γ-Bi₂O₃>β-Bi₂O₃>α-Bi₂O₃>δ-Bi₂O₃一致, 而导带还原电位低于H₂/H₂O, 预测纯Bi₂O₃很难具备催化产氢能力. 光学性质分析发现, γ和δ相的起始响应波长较大, 说明其应具备红外激发的性质. 这些结果可为获得偏红外激发和较宽光谱响应的Bi₂O₃材料研究提供理论基础, 为研发和应用Bi₂O₃及其复合物提供重要的指导.     

金属串配合物[MM′M″(dpa)4(Cl)2](M=Co,Ni;M′,M″=Co,Rh)电子输运的理论研究

采用密度泛函理论DFT/BP86方法研究金属串配合物[MM'M″(dpa)₄(Cl)₂] [MM'M″=CoCoCo(1), CoCoRh(2), CoRhRh(3), NiCoRh(4)] 的结构和电子输运性质. 结果表明, 配合物1, 2和4的最稳定自旋态均存在1个(MM'M″)⁶⁺的离域$\sigma_{3}^{3}$键($\sigma^{2}\sigma_{nb}^{1}\sigma^{*0}$); 但配合物3具有1个(MM'M″)⁶⁺的离域$\sigma_{3}^{4}$键($\sigma^{2}\sigma_{nb}^{2}\sigma^{*0}$)和2个$\pi_{3}^{5}$键($\pi^{4}\pi_{nb}^{4}\pi^{*2}$), 故Rh—Rh键和Co—Rh键较强; Rh的引入使M—M键增强, Ni的引入则使M—M键减弱, 键强次序为Rh—Rh>Co—Rh>Co—Co>Ni—Co. 配合物14的传输通道均含有π和σ型轨道. 正偏压下, 配合物2和3的电流大于配合物1和4的. 负偏压下, 配合物4中出现负微分电阻效应. 配合物3中形成传输通道的σ_nbα/β和π^*α/β轨道能级分裂明显, (MM'M″)⁶⁺对β自旋的π^*轨道的贡献(88%)比α自旋(74%)的大, 使β自旋的电子更易传输, 具有较好的自旋过滤效应(70%80%).     

铑催化吲哚C(4)—H选择性活化构建氮杂-螺[4,5]吲哚骨架※

螺环吲哚是天然产物和药物化学中的一类重要骨架, 通过导向基团导向的C—H键活化反应已经成为构建螺环吲哚的重要方法. 目前在吲哚的吡咯片段上引入螺环结构已经比较成熟, 然而在吲哚的苯环片段上引入螺环还存在挑战. 以过渡金属铑催化, 选择性地活化吲哚C(4)—H键, 高效构建了氮杂-螺[4,5]吲哚骨架.     

电场下偶氮苯衍生物分子顺反异构化反应机理的理论研究

本工作采用密度泛函理论(DFT)方法计算研究了不同电场强度下偶氮苯衍生物2'-对甲苯偶氮基-1,1':4,4'-三苯基- 4,4'二羧酸(TTDA)顺反异构化反应的机理. TTDA经过C—N¹=N²角度顺反异构化过程存在三种可能的异构化模式 (N=N偶氮基团中与大取代基相连的N原子称为N², 与小取代基相连的N原子称为N¹), 绕N¹或N²原子的反转和绕N¹=N²键旋转. 计算结果表明, 加入沿z轴的电场(以三联苯侧链C¹→C²方向为z轴正方向), 旋转路径为反应最优路径. 此外, 还研究了沿N=N键方向加入电场(以N²→N¹方向为z轴正方向), 在电场强度F_z=0.00 V•Å^-1时, N1反转路径能垒较N2反转路径高. 当–0.62 V•Å^-1<F_z≤0.93 V•Å^-1时, 旋转路径为优势路径. 当加入沿z轴的反向电场–0.93 V•Å^-1≤F_z≤–0.62 V•Å^-1时, N2反转为优势路径.     

基于二茂铁的两个查尔酮衍生物的合成及超快三阶非线性光学响应

二茂铁是合成新颖有机功能材料的基本单元之一。 本文设计并合成了两个基于二茂铁的同分异构查尔酮衍生物:1-二茂铁基-3-(噻吩-2-基)丙烯酮(a)和1-二茂铁基-3-(噻吩-3-基)丙烯酮(b)。 采用超快激光Z-扫描技术(脉宽180 fs,波长532 nm)测定了化合物a和b的三阶非线性光学性质。 结果表明,化合物a吸收系数β=-2.1×10^-12 m/W,折射率n₂=1.9×10^-19 m²/W,分子超极化率γ=5.37×10^-32 esu;化合物b:β=-1.2×10^-13 m/W,n₂=2.0×10^-19 m²/W,γ=4.48×10^-32 esu。 说明在飞秒激光激发下,电荷转移能够在化合物a和b分子内部快速进行,二者均具有优异的超快三阶非线性光学响应。 在B3LYP/6-311+G(d,p)理论水平下,计算了化合物a和b分子轨道能量、极化率和各基团在前线分子轨道中的占有率。 理论计算结果显示,二茂铁基团在化合物a和b前线分子轨道中占有率分别为97%和98%,对两化合物的非线性光学性能起主导作用。     

聚α烯烃光催化降解的机理研究

采用光催化微反应器对铜箔表面附着的聚α烯烃进行了光催化降解处理, 利用X射线光电子能谱(XPS)、 电子自旋共振谱(ESR)和傅里叶变换红外光谱(FTIR)等对光催化降解前后聚α烯烃的元素化学状态、 自由基和官能团进行了检测, 并探讨了光催化降解机理. 结果表明, 聚α烯烃光催化降解过程中发生了含氧基团的引入和CO₂脱附; 参加降解反应的自由基主要为羟基自由基·OH, 降解过程中—OH逐渐增多、 C—H键逐渐减少; 聚α烯烃光催化降解过程中, ·OH进攻聚α烯烃是从取代反应开始的, 首先取代的是末端的氢原子, 然后是末端羟基向醛基和羧基的转变, 最后是碳链断裂形成小分子有机物, 这一过程持续进行, 最终生成CO₂和H₂O等无机物.     

硼氮[4]螺烯的合成、表征及光物理性质研究

将多环芳烃中的碳碳双键替换成等电子体和等结构体的硼氮键是有效调节多环芳烃光物理性质的手段之一,己成为有机材料领域研究的热点.文献中报道的多是平面型的硼氮芳烃分子,非平面的硼氮芳烃研究相对较少.本工作研究了两个系列非平面的硼氮[4]螺烯分子的合成和性质,通过Suzuki偶联、亲电芳香硼化及亲核取代反应,简洁地合成了目标分子,并通过~1H NMR、~(13)C NMR和11B NMR等表征.单晶结构表明硼氮[4]螺烯具有螺烯的特征螺旋结构.结合理论计算对硼氮[4]螺烯的芳香性进行了定性定量分析,发现硼氮[4]螺烯的硼氮子环具有弱的芳香性.光物理研究表明,硼氮[4]螺烯相对于全碳螺烯,表现出了显著的红移吸收光谱和轻微的蓝移发射光谱,以及较高的荧光量子产率.     

凝聚态化学的研究对象与主要科学问题

本文提出了“凝聚态化学(Condensed Matter Chemistry)”的概念,提出其研究对象是由传统化学上被视为反应主体的原子、离子以及分子等“基本粒子”,藉“稳定的粘连关系”凝聚形成的具有特定组成、多层次结构与性质、功能的物质凝聚态。本文以固态为例,讨论了(1)凝聚态的多层次结构;(2)凝聚态的化学性质与化学反应;(3)凝聚态构筑化学中的前沿科学问题;(4)凝聚态化学中的高新表征方法与技术的发展与开拓。并对四个领域中的主要科学问题进行了比较深入的探讨,为进一步再认识传统化学,特别是对其中心问题,即化学反应的再认识提供了方向与基础,为开展“凝聚态的多层次结构-化学性质与化学反应-凝聚态物质的构筑定向合成与精准制备”三个方面的关系研究,总结规律与“分态”建立“凝聚态结构理论”与“凝聚态化学反应理论”,建设“凝聚态化学”提供了科学体系与内容,并为进一步开展“凝聚态工程学”研究提供了前提与基础。     

Salan钛双齿配合物的Sonogashira合成后修饰反应研究

报道了一种通过钯催化Sonogashira反应对具抗癌活性的ONNO型“Salan”、“2,6-吡啶二甲酸”双配位钛化合物进行高效后修饰的方法学研究. 通过Sonogashira反应直接向两个配体引入不同炔烃功能基团, 共制备了20个新型的钛配合物. 进一步通过该方法学向钛配合物引入三苯乙炔基及癌细胞靶向分子雌炔醇. 通过¹H NMR和¹³C NMR、HRMS、UV-vis和IR等手段对所有配合物进行了结构表征. 多数炔基活化的钛配合物对HeLa S3和Hep G2癌细胞在微摩尔范围内表现出显著提升的抑制活性, 其中配合物3j [Salan^2,4-dimethylTi^(IV)Dipic^{4-(3-(dimethylamino)prop-1-yn-1-yl)}]的IC₅₀值较顺铂提升约一个数量级, 是本研究中活性最强的Salan钛双齿配合物[3j, HeLa S3: IC₅₀=(0.5±0.1) μmol/L, Hep G2: IC₅₀=(0.7±0.2) μmol/L; 顺铂, HeLa S3: IC₅₀=(3.3±0.2) μmol/L, Hep G2: IC₅₀=(6.0±1.1) μmol/L]. 针对芳炔和脂肪炔取代不同配体的代表配合物2a、2f、3a和3j开展的稳定性研究表明, 向2位无取代Salan引入的炔基可通过电负性改变配合物的水稳定性, 2a和2f水解出无抗癌活性的炔基Salan配体1a*, 半数水解时间(t_1/2)分别为5和10 h. 炔基功能化2,6-吡啶二甲酸的配合物3a和3j含有2位甲基取代的Salan配体, 它们在水环境中保持稳定. 此外, 本文总结和阐释了这类新型炔基功能化钛配合物的“结构-活性”关系, 并对后续开发此类钛配合物的前景和策略做出了分析与展望.     

弱电场驱动下高分子链在周期管道内输运的模拟研究

采用Langevin动力学方法模拟研究了弱电场驱动下高分子链在无限长周期管道中的输运过程. 管道由长度相等的α和β两部分周期排列而成, 其中高分子链与α管道间存在相互吸引作用, 而与β管道间存在纯排斥作用. 模拟结果表明, 高分子链在输运过程中存在明显的受限阶段, 其逃离受限的方式与管道宽度有关且满足不同的规律. 对于窄管道, 高分子链在输运过程中呈直线伸展构型且运动具有“蛇爬行”特征. 高分子链逃离受限过程伴随着整条链的运动, 从而导致迁移率随高分子链长呈周期变化, 而且在迁移率极值位置, 高分子链投影长度与管道半周期之间存在简单的整数倍关系. 对于宽管道, 高分子链在输运过程中出现弯折构型且运动具有“蠕虫运动”特征. 当链长比较长时, 高分子链可通过链前端部分的伸长逃离受限, 从而导致迁移率与高分子链长度无关. 模拟结果可能有助于利用周期管道对不同长度的高分子链进行分离及可控输运.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.