共查询到20条相似文献,搜索用时 109 毫秒
1.
乙烯-丙烯酸酯-甲基丙烯酸缩水甘油酯三元共聚物对PC/PBT共混体系性能的影响 总被引:1,自引:0,他引:1
采用DSC方法测试了PC/PBT(70/30,质量份)共混体系及在体系中加入乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯共聚物(AX8900)共混物的玻璃化温度,研究了AX8900对PC/PBT共混体系性能的影响.结果表明:AX8900改善了PC/PBT共混体系两相间的相容性,而且极大地提高了PC/PBT共混体系的冲击强度和断裂伸长率,AX8900用量为1 phr时,共混体系的综合性能较好. 相似文献
2.
3.
4.
5.
6.
7.
8.
9.
10.
《工程塑料应用》2020,(2)
通过双螺杆挤出机制备了聚碳酸酯(PC)/聚对苯二甲酸丁二酯(PBT)/玻璃纤维(GF)三元复合材料,研究了PC,PBT,GF以及增容剂的含量对复合材料的影响。结果表明,在PC/PBT体系中,当PC∶PBT=7∶3时复合材料可以达到较好的刚韧平衡,拉伸强度为71.6 MPa,缺口冲击强度为10.21 kJ/m~2;在PC/PBT/GF复合材料中GF可以起到异相成核的作用,提高了复合材料的结晶速度,随着GF含量的增加,弯曲强度逐渐增加,拉伸强度先上升后下降,缺口冲击强度先下降后上升;增容剂KH–550,AX8900以及PTW均能改善PC/PBT/GF三元复合材料的相容性,其中AX8900增容效果最佳,从力学性能表明,加入1%的AX8900,PC/PBT/GF复合材料的性能最平衡,弯曲弹性模量和缺口冲击强度分别是没有添加增容剂的1.13倍和2.11倍。 相似文献
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
15.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
16.
18.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
19.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献