Redox‐Polymer‐Based High‐Current‐Density Gas‐Diffusion H2‐Oxidation Bioanode Using [FeFe] Hydrogenase from Desulfovibrio desulfuricans in a Membrane‐free Biofuel Cell

The incorporation of highly active but also highly sensitive catalysts (e.g. the [FeFe] hydrogenase from Desulfovibrio desulfuricans) in biofuel cells is still one of the major challenges in sustainable energy conversion. We report the fabrication of a dual‐gas diffusion electrode H₂/O₂ biofuel cell equipped with a [FeFe] hydrogenase/redox polymer‐based high‐current‐density H₂‐oxidation bioanode. The bioanodes show benchmark current densities of around 14 mA cm^?2 and the corresponding fuel cell tests exhibit a benchmark for a hydrogenase/redox polymer‐based biofuel cell with outstanding power densities of 5.4 mW cm^?2 at 0.7 V cell voltage. Furthermore, the highly sensitive [FeFe] hydrogenase is protected against oxygen damage by the redox polymer and can function under 5 % O₂.     

Solvent‐Free Enzyme Activity: Quick,High‐Yielding Mechanoenzymatic Hydrolysis of Cellulose into Glucose

Mechanochemistry enables enzymatic cleavage of cellulose into glucose without bulk solvents, acids, other aggressive reagents, or substrate pre‐treatment. This clean mechanoenzymatic process (coined RAging) is also directly applicable to biomass, avoids many limitations associated with the use of cellulases, and produces glucose concentrations greater than three times that obtained by conventional methods.     

Heterolytic Cleavage of Hydrogen by an Iron Hydrogenase Model: An Fe‐H⋅⋅⋅H‐N Dihydrogen Bond Characterized by Neutron Diffraction

Hydrogenase enzymes in nature use hydrogen as a fuel, but the heterolytic cleavage of H? H bonds cannot be readily observed in enzymes. Here we show that an iron complex with pendant amines in the diphosphine ligand cleaves hydrogen heterolytically. The product has a strong Fe‐H???H‐N dihydrogen bond. The structure was determined by single‐crystal neutron diffraction, and has a remarkably short H???H distance of 1.489(10) Å between the protic N‐H^δ+ and hydridic Fe‐H^δ? part. The structural data for [CpFe H (P^tBu₂N^tBu₂ H )]⁺ provide a glimpse of how the H? H bond is oxidized or generated in hydrogenase enzymes. These results now provide a full picture for the first time, illustrating structures and reactivity of the dihydrogen complex and the product of the heterolytic cleavage of H₂ in a functional model of the active site of the [FeFe] hydrogenase enzyme.     

A Noble‐Metal‐Free System for Photocatalytic Hydrogen Production from Water

A series of heteroleptic copper(I) complexes with bidentate $\widehat{PP}$ and $\widehat{NN}$ chelate ligands was prepared and successfully applied as photosensitizers in the light‐driven production of hydrogen, by using [Fe₃(CO)₁₂] as a water‐reduction catalyst (WRC). These systems efficiently reduces protons from water/THF/triethylamine mixtures, in which the amine serves as a sacrificial electron donor (SR). Turnover numbers (for H) up to 1330 were obtained with these fully noble‐metal‐free systems. The new complexes were electrochemically and photophysically characterized. They exhibited a correlation between the lifetimes of the MLCT excited state and their efficiency as photosensitizers in proton‐reduction systems. Within these experiments, considerably long excited‐state lifetimes of up to 54 μs were observed. Quenching studies with the SR, in the presence and absence of the WRC, showed that intramolecular deactivation was more efficient in the former case, thus suggesting the predominance of an oxidative quenching pathway.     

Asymmetric β‐Methylation of l‐ and d‐α‐Amino Acids by a Self‐Contained Enzyme Cascade

This report describes a modular enzyme‐catalyzed cascade reaction that transforms l ‐ or d ‐α‐amino acids to β‐methyl‐α‐amino acids. In this process an α‐amino acid transaminase, an α‐keto acid methyltransferase, and a halide methyltransferase cooperate in two orthogonal reaction cycles that mediate product formation and regeneration of the cofactor pyridoxal‐5′‐phosphate and the co‐substrate S‐adenosylmethionine. The only stoichiometric reagents consumed in this process are the unprotected l ‐ or d ‐α‐amino acid and methyl iodide.     

利用人工氧还酶体系催化L-苹果酸氧化脱羧反应

利用含人工氧还酶体系的粗酶液代替纯酶催化反应,以省去酶分离纯化过程.由苹果酸酶突变体ME-t(MEL310R/Q401C)和非天然辅酶烟酰胺5-氟胞嘧啶二核苷酸(NFCD+)组成的人工氧还酶体系可以催化氧化L-苹果酸生成丙酮酸,并得到非天然辅酶的还原态(NFCDH).利用含人工氧还酶体系的粗酶液催化反应,只得到单一产物丙酮酸,其选择性与纯酶催化的相同.来自粪肠球菌Enterococcus faecalis的NADH氧化酶(NOX)可再生NFCD+.与含NAD+,ME粗酶液和NOX粗酶液的偶联反应体系相比,含NFCD+,ME-t粗酶液和NOX粗酶液的体系获得的丙酮酸产率高9%,而副产物乳酸明显减少.可见人工氧还酶体系使用更方便,且产物选择性更高,有望代替纯酶催化反应.这为降低生物催化剂的成本,扩大生物催化反应的应用提供了一种新的策略.     

High‐Yield Electrosynthesis of Hydrogen Peroxide from Oxygen Reduction by Hierarchically Porous Carbon

H₂O₂ production by electroreduction of O₂ is an attractive alternative to the current anthraquinone process, which is highly desirable for chemical industries and environmental remediation. However, it remains a great challenge to develop cost‐effective electrocatalysts for H₂O₂ synthesis. Here, hierarchically porous carbon (HPC) was proposed for the electrosynthesis of H₂O₂ from O₂ reduction. It exhibited high activity for O₂ reduction and good H₂O₂ selectivity (95.0–70.2 %, most of them >90.0 % at pH 1–4 and >80.0 % at pH 7). High‐yield H₂O₂ generation has been achieved on HPC with H₂O₂ concentrations of 222.6–62.0 mmol L^?1 (2.5 h) and corresponding H₂O₂ production rates of 395.7–110.2 mmol h^?1 g^?1 at pH 1–7 and ?0.5 V. Moreover, HPC was energy‐efficient for H₂O₂ production with current efficiency of 81.8–70.8 %. The exceptional performance of HPC for electrosynthesis of H₂O₂ could be attributed to its high content of sp³‐C and defects, large surface area and fast mass transfer.     

Metal‐Free Dihydrogen Oxidation by a Borenium Cation: A Combined Electrochemical/Frustrated Lewis Pair Approach

In order to use H₂ as a clean source of electricity, prohibitively rare and expensive precious metal electrocatalysts, such as Pt, are often used to overcome the large oxidative voltage required to convert H₂ into 2 H⁺ and 2 e^?. Herein, we report a metal‐free approach to catalyze the oxidation of H₂ by combining the ability of frustrated Lewis pairs (FLPs) to heterolytically cleave H₂ with the in situ electrochemical oxidation of the resulting borohydride. The use of the NHC‐stabilized borenium cation [(IiPr₂)(BC₈H₁₄)]⁺ (IiPr₂=C₃H₂(NiPr)₂, NHC=N‐heterocyclic carbene) as the Lewis acidic component of the FLP is shown to decrease the voltage required for H₂ oxidation by 910 mV at inexpensive carbon electrodes, a significant energy saving equivalent to 175.6 kJ mol^?1. The NHC–borenium Lewis acid also offers improved catalyst recyclability and chemical stability compared to B(C₆F₅)₃, the paradigm Lewis acid originally used to pioneer our combined electrochemical/frustrated Lewis pair approach.     

Cyanide‐Free and Broadly Applicable Enantioselective Synthetic Platform for Chiral Nitriles through a Biocatalytic Approach

A cyanide‐free platform technology for the synthesis of chiral nitriles by biocatalytic enantioselective dehydration of a wide range of aldoximes is reported. The nitriles were obtained with high enantiomeric excess of >90 % ee (and up to 99 % ee ) in many cases, and a “privileged substrate structure” with respect to high enantioselectivity was identified. Furthermore, a surprising phenomenon was observed for the enantiospecificity that is usually not observed in enzyme catalysis. Depending on whether the E or Z isomer of the racemic aldoxime substrate was employed, one or the other enantiomer of the corresponding nitrile was formed preferentially with the same enzyme.     

Sunlight‐Driven Hydrogen Peroxide Production from Water and Molecular Oxygen by Metal‐Free Photocatalysts

Design of green, safe, and sustainable process for the synthesis of hydrogen peroxide (H₂O₂) is a very important subject. Early reported processes, however, require hydrogen (H₂) and palladium‐based catalysts. Herein we propose a photocatalytic process for H₂O₂ synthesis driven by metal‐free catalysts with earth‐abundant water and molecular oxygen (O₂) as resources under sunlight irradiation (λ>400 nm). We use graphitic carbon nitride (g‐C₃N₄) containing electron‐deficient aromatic diimide units as catalysts. Incorporating the diimide units positively shifts the valence‐band potential of the catalysts, while maintaining sufficient conduction‐band potential for O₂ reduction. Visible light irradiation of the catalysts in pure water with O₂ successfully produces H₂O₂ by oxidation of water by the photoformed valence‐band holes and selective two‐electron reduction of O₂ by the conduction band electrons.     

High‐Yield Electrochemical Production of Formaldehyde from CO2 and Seawater

The catalytic, electrocatalytic, or photocatalytic conversion of CO₂ into useful chemicals in high yield for industrial applications has so far proven difficult. Herein, we present our work on the electrochemical reduction of CO₂ in seawater using a boron‐doped diamond (BDD) electrode under ambient conditions to produce formaldehyde. This method overcomes the usual limitation of the low yield of higher‐order products, and also reduces the generation of H₂. In comparison with other electrode materials, BDD electrodes have a wide potential window and high electrochemical stability, and, moreover, exhibit very high Faradaic efficiency (74 %) for the production of formaldehyde, using either methanol, aqueous NaCl, or seawater as the electrolyte. The high Faradaic efficiency is attributed to the sp³‐bonded carbon of the BDD. Our results have wide ranging implications for the efficient and cost‐effective conversion of CO₂.     

Intermediate Product Regulation in Tandem Solid Catalysts with Multimodal Porosity for High‐Yield Synthetic Fuel Production

Tandem catalysis is an attractive strategy to intensify chemical technologies. However, simultaneous control over the individual and concerted catalyst performances poses a challenge. We demonstrate that enhanced pore transport within a Co/Al₂O₃ Fischer–Tropsch (FT) catalyst with hierarchical porosity enables its tandem integration with a Pt/ZSM‐5 zeolitic hydrotreating catalyst in a spatially distant fashion that allows for catalyst‐specific temperature adjustment. Nevertheless, this system resembles the case of close active‐site proximity by mitigating secondary reactions of primary FT α‐olefin products. This approach enables the combination of in situ dewaxing with a minimum production of gaseous hydrocarbons (18 wt %) and an up to twofold higher (50 wt %) selectivity to middle distillates compared to tandem pairs based on benchmark mesoporous FT catalysts. An overall 80 % selectivity to liquid hydrocarbons from syngas is attained in one step, attesting to the potential of this strategy for increasing the carbon efficiency in intensified gas‐to‐liquid technologies.     

A FRET Probe for Cell‐Based Imaging of Ganglioside‐Processing Enzyme Activity and High‐Throughput Screening

Gangliosides are important signaling molecules in the cell membrane and are processed by several enzymes. Deficiencies in these enzymes can cause human lysosomal storage diseases. Building an understanding of the pathways of glycosphingolipid catabolism requires methods for the analysis of these enzymatic activities A GM3‐derived FRET probe was synthesized chemoenzymatically for the detection and quantitation of a range of ganglioside‐degrading enzymes, both in cell lysates and in living cells. This is the first substrate that enables the ratiometric fluorogenic assay of sphingolipid ceramide N‐deacylase and endoglycoceramidase and can detect and localize neuraminidase activity in living cells. It is therefore a valuable tool for building a better understanding of membrane‐confined enzymology. It also enables the robust and reliable assay of ganglioside‐degrading enzymes in a microtiter plate, thus opening the door to screening for novel or engineered biocatalysts or for new inhibitors.     

Solar Hydrogen from an Aqueous,Noble‐Metal‐Free Hybrid System in a Continuous‐Flow Sampling Reaction System

We introduce the visible‐light photocatalytic H₂ evolution reaction as catalyzed by a cobaloxime/carbon nitride (C₃N₄) noble‐metal‐free hybrid photosystem by using a continuous‐flow sampling reaction system. The photocatalytic H₂ evolution rate is highly dependent on the structure of C₃N₄, in which porous C₃N₄ shows the best activity compared with bulk C₃N₄ (lamellar) and C₃N₄ nanosheets. When using porous C₃N₄, the system is neither affected by the solution pH, nor the C₃N₄ concentration, nor the structure of the cobaloxime complex.