Physical,mechanical, and thermal properties of micronized organo‐montmorillonite suspension modified wood flour/poly(lactic acid) composites

In this study, micronized organo‐montmorillonite (OMMT) suspension was prepared with sodium‐montmorillonite (Na‐MMT), didecyl dimethyl ammonium chloride, and dispersant polyethylene glycol 1000 by a ball‐milling process. Then, wood flours (WFs) were impregnated with prepared OMMT suspension at a concentration of 0.5, 1.0, 2.0, or 4.0%. WFs were characterized by X‐ray diffraction and scanning electron microscopy. The hygroscopicity of WF was investigated by a vapor adsorption method. WFs were, respectively, blended with poly (lactic acid) (PLA) to produce WF/PLA composites. Thereafter, physical, mechanical, and thermal properties of the composites were tested. The results showed that a great amount of OMMT attached on the surface of WF, partly penetrating into the microstructure of WF. Owing to the hydrophobicity of OMMT, the vapor adsorption of OMMT‐modified WF decreased. The composite which was produced by WF treated with 0.5% OMMT suspension, showing an increment in the physical, mechanical, and thermal properties. However, OMMT should not be overloaded. Otherwise, the accumulation of OMMT might cause poor interfacial adhesion between WF and PLA matrix. POLYM. COMPOS., 36:731–738, 2015. © 2014 Society of Plastics Engineers     

SEBS/蒙脱土复合材料结构及热性能研究

采用十二烷基三苯基溴化膦(DTPB)改性钠基蒙脱土(Na+-MMT),利用熔融插层法制备氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物(SEBS)/蒙脱土复合材料。采用X射线衍射仪、红外光谱仪、场发射扫描电镜、热重分析仪对样品进行结构表征和性能测试,比较不同有机化蒙脱土(OMMT)对SEBS/OMMT复合材料的影响。结果表明:无论是MMT还是OMMT都起到了阻止SEBS热失重进程的发展,且携带苯基的DTPB有机改性剂有利于OMMT与SEBS复合材料的相容性。     

Effect of clay modification on the morphological,mechanical, and thermal properties of polyamide 6/polypropylene/montmorillonite nanocomposites

Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organophilic montmorillonite (OMMT) were prepared by melt compounding. The sodium montmorillonite (Na‐MMT) was modified using three different types of alkyl ammonium salts, namely dodecylamine, 12‐aminolauric acid, and stearylamine. The effect of clay modification on the morphological and mechanical properties of PA6/PP nanocomposites was investigated using x‐ray diffraction (XRD), transmission electron microscopy (TEM), tensile, flexural, and impact tests. The thermal properties of PA6/PP nanocomposites were characterized using thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and heat distortion temperature (HDT). XRD and TEM results indicated the formation of exfoliated structure for the PA6/PP nanocomposites prepared using stearylamine modified montmorillonite. On the other hand, a mixture of intercalated and exfoliated structures was found for the PA6/PP nanocomposites prepared using 12‐aminolauric acid and dodecylamine modified montmorillonite. Incorporation of OMMT increased the stiffness but decreased the ductility and toughness of PA6/PP blend. The PA6/PP nanocomposite containing stearylamine modified montmorillonite showed the highest tensile, flexural, and thermal properties among all nanocomposites. This could be attributed to better exfoliated structure in the PA6/PP nanocomposite containing stearylamine modified montmorillonite. The storage modulus and HDT of PA6/PP blend were increased significantly with the incorporation of both Na‐MMT and OMMT. The highest value in both storage modulus and HDT was found in the PA6/PP nanocomposite containing stearylamine modified montmorillonite due to its better exfoliated structure. POLYM. COMPOS., 31:1156–1167, 2010. © 2009 Society of Plastics Engineers     

Effect of montmorillonite on properties of styrene–butadiene–styrene copolymer modified bitumen

Clay/styrene–butadiene–styrene (SBS) modified bitumen composites were prepared by melt blending with different contents of sodium montmorillonite (Na‐MMT) and organophilic montmorillonite (OMMT). The structures of clay/SBS modified bitumen composites were characterized by XRD. The XRD results showed that Na‐MMT/SBS modified bitumen composites may form an intercalated structure, whereas the OMMT/SBS modified bitumen composites may form an exfoliated structure. Effects of MMT on physical properties, dynamic rheological behaviors, and aging properties of SBS modified bitumen were investigated. The addition of Na‐MMT and OMMT increases both the softening point and viscosity of SBS modified bitumens and the clay/SBS modified bitumens exhibited higher complex modulus, lower phase angle. The high‐temperature storage stability can also be improved by clay with a proper amount added. Furthermore, clay/SBS modified bitumen composites showed better resistance to aging than SBS modified bitumen, which was ascribed to barrier of the intercalated or exfoliated structure to oxygen, reducing efficiently the oxidation of bitumen, and the degradation of SBS. POLYM. ENG. SCI., 47:1289–1295, 2007. © 2007 Society of Plastics Engineers     

Polypropylene nanocomposites prepared with natural and ODTABr‐modified montmorillonite

In this study, the main goal is to obtain montmorillonite nanocomposites of polypropylene (PP). To achieve this goal, a two‐phase study was performed. In the first part of the work, organomodified clay (OMMT) was synthesized and characterized. Octadecyltrimethylammonium bromide (ODTABr) cationic surfactant was added to the clay (Na‐activated montmorillonite, MMT) dispersions in different concentrations in the range of 5 × 10^?5–1 × 10^?2 mol/L. Rheologic, electrokinetic, and spectral analyses indicated that ODTABr has interacted with MMT at optimum conditions when the concentration was 1 × 10^?2 mol/L. In the second part, modified (OMMT) and unmodified (MMT) montmorillonite were used to obtain PP nanocomposites (OMMT/PP and MMT/PP, respectively). The nanocomposites were prepared by melt intercalation where the montmorillonite contents were 1 or 5% (w/w) for each case. The thermal analyses showed that the thermal properties of OMMT/PP nanocomposites were better than MMT/PP, and both of them were also better than pure polymer. Increase in the concentration of MMT (or OMMT) decreased the thermal resistance. Based on the IR absorption intensity changes of regularity and conformational bands, it is found that the content of the helical structure of macromolecular chains has increased with increasing concentrations of both MMT and OMMT in the nanocomposites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of organic montmorillonite nanoparticles on the microstructures and thermal and tribological properties of polyethersulfone and polytetrafluoroethylene composites

Because of high wear rate and low thermal deformation temperature, the generalization and application of polytetrafluoroethylene (PTFE) in the field of tribology is restrained to a certain extent. In order to improve the wear resistance and thermal stability of this self‐lubricating polymer, organic montmorillonite (OMMT) nanoparticle reinforced polyethersulfone (PES) and PTFE ternary composites were prepared by the cold molding and vacuum sintering technology. The effects of sodium montmorillonite (Na‐MMT) and OMMT on the microstructures, thermal stabilities and tribological properties of PTFE composites were comparatively studied. The results show that the thermal stability of the PES/PTFE composites is clearly improved by the incorporation of OMMT nanoparticles. Not only the friction coefficients but also the wear rates of OMMT/PES/PTFE composites are less than those of Na‐MMT/PES/PTFE composites under identical tribological tests. Of all these PTFE composites, the PES/PTFE composite containing 10.0 wt% OMMT nanoparticles exhibits the best friction and wear properties (μ = 0.14, k = 5.78 × 10^?15 m³ N^–1 m^?1). This can be attributed to the existence of a polymer multicomponent layer consisting of PTFE, PES and OMMT on the composite surface as well as the formation of uniform PTFE transfer film on the worn surfaces of metal counterparts.     

PBA/OMMT制备及其对PA6力学性能的影响

用十二烷基磺酸钠(SDS)将Na基蒙脱土(MMT)改性成有机蒙脱土(OMMT),采用原位聚合法制备了聚丙烯酸丁酯(PBA)/OMMT,并将其按适当比例添加到尼龙6(PA6)中。通过红外光谱仪、差示扫描量热仪等表征了OMMT、PBA/OMMT的结构,并检测了PA6/PBA/OMMT复合材料的力学性能。结果表明:添加5%的PBA/OMMT后,PA6/PBA/OMMT复合材料的拉伸强度提高了23.1%,缺口冲击强度的降低幅度有所减缓。     

Nonisothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites prepared by melt processing

In this study, cold and melt crystallization behaviors of amorphous poly(ethylene terephthalate) (PET)/clay nanocomposites were investigated. Two nanocomposite samples with the same amount of inorganic content were prepared by melt processing using natural montmorillonite (Na‐MMT) and organo‐modified montmorillonite (org‐MMT). Depending on the clay structure, clay dispersion into PET and crystallization behavior of the samples were studied using X‐ray diffraction and differential scanning calorimetry methods, respectively. Effects of clay structure and organic groups between clay layers in org‐MMT on the melt crystallization kinetics of the samples were analyzed with various kinetic models, namely, the Ozawa, Avrami modified by Jeziorny, and Liu‐Mo. Crystallization activation energies of the samples were also determined by the Kissinger and Augis–Bennett models. Exfoliated structures were obtained in the nanocomposite samples prepared with both the Na‐MMT and org‐MMT. From the kinetics study, it was found that the melt‐crystallization rate of the sample prepared with the Na‐MMT was higher than that prepared with the org‐MMT at a given cooling rate. It can be concluded that organic ammonium groups in the org‐MMT decelerate the crystallization rate of PET chains possibly by affecting the chain diffusion and folding. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Influence of the clay modification and compatibilizer on the structure and mechanical properties of ethylene–propylene–diene rubber/montmorillonite composites

Ethylene–propylene–diene rubber (EPDM)/montmorillonite (MMT) composites were prepared through a melt process, and three kinds of surfactants with different ammonium cations were used to modify MMT and affect the morphology of the composites. The morphology of the composites depended on the alkyl ammonium salt length, that is, the hydrophobicity of the organic surfactants. Organophilic montmorillonite (OMMT), modified by octadecyltrimethyl ammonium salt and distearyldimethyl ammonium salt, was intercalated and partially exfoliated in the EPDM matrix, whereas OMMT modified by hexadecyltrimethyl ammonium chloride exhibited a morphology in which OMMT existed as a common filler. Ethylene–propylene–diene rubber grafted with maleic anhydride (MAH‐g‐EPDM) was used as a compatibilizer and greatly affected the dispersion of OMMT. When OMMTs were modified by octadecyltrimethyl ammonium chloride and distearydimethyl ammonium chloride, the EPDM/OMMT/MAH‐g‐EPDM composites (100/15/5) had an exfoliated structure, and they showed good mechanical properties and high dynamic moduli. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 638–646, 2004     

Preparation and characterization of hyperbranched polymer modified montmorillonite/chlorinated butyl rubber damping composites

In this work, Na⁺‐montmorillonite (MMT) was modified by hyperbranched polymer (HBP) and grafted with hindered phenol to improve the damping and other properties of the chlorinated butyl rubber (CIIR) composites. The hyperbranched polymer‐modified montmorillonite (HBP‐OMMT) was prepared by organic montmorillonite (OMMT) that was obtained from the cation exchange reaction between MMT and silane quaternary ammonium salt. The main characterization methods were Fourier transform infrared spectroscopy, hydrogen nuclear magnetic resonance, X‐ray diffraction, scanning electron microscopy, energy dispersive spectrometer, and thermogravimetric (TG) analysis. The basal spacings of MMT, OMMT, and HBP‐OMMT were 1.47, 2.94, and 4.09 nm, respectively. The onset and center temperatures of decomposition (T_?5% and T_max) of HBP‐OMMT were improved from 301 and 369 °C to 332 and 398 °C, respectively. The CIIR damping composites were prepared by mechanical blending of HBP‐OMMT with pure CIIR. The tensile strength and elongation at break of the composites were improved from 5.4 MPa and 890% to 7.6 MPa and 1066%. From TG curves, T_?5% and T_max were increased from 297.4 and 406.0 °C to 323.3 and 410.5 °C, respectively. The dynamic mechanical analysis results showed that tan δ rose from the original 1.20 to 1.44 with the addition of HBP‐OMMT. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43645.     

The effect of clay modification on the mechanical properties of poly(methyl methacrylate)/organomodified montmorillonite nanocomposites prepared by in situ suspension polymerization

Poly(methylmethacrylate) (PMMA)/montmorillonite (MMT) nanocomposites were prepared by in situ suspension polymerization. MMT was previously organically modified by different modification agents [dioctadecyl dimethyl ammonium chloride (DODAC) and methacrylatoethyltrimethyl ammonium chloride (MTC)] and different modification method (cation‐exchange reaction and grafting reaction), ultimately giving rise to five kinds of organomodified MMT (OMMT). The structure of the OMMT was studied by Wide angle X‐ray diffraction (WAXD) and Fourier transform infrared spectroscopy (FTIR). Meanwhile, the structure of the PMMA/MMT nanocomposites microspheres was also investigated by WAXD. The molecular weight of the polymers extracted from PMMA/MMT nanocomposites was measured by gel permeation chromatograph (GPC). Finally, the mechanical properties of these PMMA/MMT nanocomposites were studied in detail. It was found that large interlayer spacing (d₀₀₁) of OMMT could not entirely ensure an exfoliated structure of resultant PMMA/MMT nanocomposites, while OMMT with relative small d₀₀₁ could still yield exfoliated structure as long as the compatibility between OMMT and polymer matrix was favorable. In addition, the results of mechanical investigation indicated that the compatibility between OMMT and PMMA matrix turned out to be the dominant factor deciding the final mechanical properties of PMMA/MMT nanocomposites. POLYM. COMPOS., 37:1705–1714, 2016. © 2014 Society of Plastics Engineers     

Nonisothermal crystallization kinetics of polyoxymethylene/montmorillonite nanocomposite

The nonisothermal crystallization kinetics of polyoxymethylene (POM), polyoxymethylene/Na–montmorillonite (POM/Na–MMT), and polyoxymethylene/organic–montmorillonite (POM/organ–MMT) nanocomposites were investigated by differential scanning calorimetry at various cooling rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the nonisothermal crystallization process of POM/Na–MMT and POM/organ–MMT nanocomposites. The difference in the values of the exponent n between POM and POM/montmorillonite nanocomposites suggests that the nonisothermal crystallization of POM/Na–MMT and POM/organ–MMT nanocomposites corresponds to a tridimensional growth with heterogeneous nucleation. The values of half‐time and the parameter Z_c, which characterizes the kinetics of nonisothermal crystallization, show that the crystallization rate of either POM/Na–MMT or POM/organ–MMT nanocomposite is faster than that of virgin POM at a given cooling rate. The activation energies were evaluated by the Kissinger method and were 387.0, 330.3, and 328.6 kJ/mol for the nonisothermal crystallization of POM, POM/Na–MMT nanocomposite, and POM/organ–MMT nanocomposite, respectively. POM/montmorillonite nanocomposite can be as easily fabricated as the original polyoxymethylene, considering that the addition of montmorillonite, either Na–montmorillonite or organ–montmorillonite, may accelerate the overall nonisothermal crystallization process. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2281–2289, 2001     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Organic–inorganic hybrids containing polyimide,organically modified clay and in situ formed polydimethylsiloxane

A series of organic–inorganic hybrid consisting of polyimide (PI) prepared from pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (ODA), organically modified montmorillonite (OMMT) and polydimethylsiloxane (PDMS) were successfully prepared by in situ sol–gel process. OMMT was prepared by surface treatment of montmorillonite (MMT) with hexadecyltrimethylammonium bromide. X-ray diffraction (XRD) analysis showed that the OMMT layers were exfoliated into the polymer matrix at 2% of OMMT content. The PI–OMMT–PDMS hybrids at 2% of OMMT content were transparent when PDMS content was less than 5%. The PI–OMMT–PDMS hybrid showed better tensile modulus, strength and elongation at break than that of pristine PI due to the reinforcement effect of OMMT and toughening effect of PDMS. The thermal stability of hybrids such as the decomposition temperature and weight residue at 800 °C also increased with the increase of PDMS content as evidenced by thermogravimetric analysis (TGA).     

Processing thermal stability and degradation kinetics of poly(vinyl chloride)/montmorillonite composites

Thermal stability of polyvinyl chloride (PVC) based montmorillonite composites with either sodium montmorillonite (MMT) or alkyl ammonium ion modified montmorillonite (OMMT) were investigated by thermogravimetric analysis. The apparent activation energies associated with the first thermal degradation stage were calculated by the methods of Flynn–Wall–Ozawa and Kissinger in nitrogen atmosphere at several different heating rates. The processing thermal stability of PVC and PVC/MMT(OMMT) composites was also discussed. Increase of mixing torque did not result in a larger intercalation extent of PVC on MMT; instead, it unexpectedly induced discoloration of PVC and then deteriorated the processing stability, especially in the presence of OMMT. The apparent activation energies in the first thermal degradation stage exhibited little difference among PVC, PVC/MMT, and PVC/OMMT composites, and the kinetic compensation effect of S_p^* kept a constant value, indicating that the thermal stability and thermal degradation mechanism of PVC were not affected by the presence of either MMT or OMMT, although the processing discoloration of PVC is observed for PVC/OMMT composite. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1521–1526, 2004     

Thermal stability of organo‐montmorillonite‐modified wood flour/poly(lactic acid) composites

In this research, wood flour (WF) was modified using sodium–montmorillonite (Na‐MMT) at four different concentrations (0.5, 1.0, 2.0, and 4.0 wt%, respectively) and didecyl dimethyl ammonium chloride (DDAC) in a two‐step process to form organo‐montmorillonite (OMMT) inside the WF or attached to the WF surface. The thus‐modified WF was then mixed with poly(lactic acid) (PLA) to produce WF/PLA composites. The thermal stability of these composites with respect to their resistance against both thermal deformation and thermal decomposition was characterized by stress relaxation, differential scanning calorimetry (DSC), and thermogravimetric (TG) analysis. Besides, the activation energies for thermal decomposition of the composites were calculated. The results showed the following: (1) The modification of WF by OMMT improved the resistance against thermal deformation of the composites at appropriate OMMT loadings (lower than 1 wt% in this study). However, after introducing excessive OMMT, the enhancements in thermal stability diminished. Composite containing WF modified by 0.5 wt% of OMMT showed the optimal thermal deformation stability in this study, reflected in the highest values of thermal properties such as the glass transition temperature, melting temperature, crystallization temperature, and slowest stress relaxation rate. (2) OMMT showed a negative effect on the resistance against thermal decomposition. Namely, OMMT accelerated the thermal decomposition of the composites, probably by the easier degradation of the organic surfactant used for the WF modification. However, this behavior might be favorable for achieving fire retardancy. POLYM. COMPOS., 37:1971–1977, 2016. © 2015 Society of Plastics Engineers     

Effects of two types of clay on physical and mechanical properties of poly(lactic acid)/wood flour composites at various wood flour contents

To investigate the effects of two types of clay, namely, Na‐montmorillonite (Na‐MMT) and organic‐montmorillonite (OMMT), on poly(lactic acid) (PLA)/wood flour (WF) composites, some physical and mechanical properties including the water sorption, thickness swelling, flexural modulus of rupture (MOR), and modulus of elasticity (MOE) of PLA/WF composites at different WF contents of 0, 20, 40, and 60 wt% were tested in this study. The results showed that: (1) the 24 h water uptake and thickness swelling increased and the flexural MOR and crystallinity decreased with the increasing WF content, whereas the flexural MOE of the composites increased with WF content up to 40 wt% but decreased sharply at WF content of 60 wt%; (2) the addition of Na‐MMT slightly increased the 24 h water uptake as well as the thickness swelling rate below 40 wt%, whereas OMMT reduced the thickness swelling at higher WF contents (40, 60 wt%) although it showed little effect on 24 h water uptake; (3) both Na‐MMT and OMMT could improve the flexural MOR and MOE of PLA/WF composite at WF contents below 40 wt%, and OMMT resulted in more obvious improvement than Na‐MMT. However, they both showed negative effect at WF content of 60 wt%; (4) XRD and FT‐Raman analysis suggested that clays would be attached more on the surface of the WF rather than diffused in the PLA matrix at a higher WF content (60 wt%); (5) SEM analysis proved that the interfacial adhesion of PLA and WF became poorer at WF content above 40 wt%, whereas it could be improved by OMMT modified. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of poly(urethane‐benzoxazine)/clay hybrid nanocomposites

Poly(urethane‐benzoxazine)/clay hybrid nanocomposites (PU/Pa–OMMTs) were prepared from an in situ copolymerization of a polyurethane (PU) prepolymer and a monofunctional benzoxazine monomer, 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (Pa), in the presence of an organophilic montmorillonite (OMMT), by solvent method using DMAc. OMMT was made from cation‐exchange of Na‐montmorillonite (MMT) with dodecyl ammonium chloride. The formation of the exfoliated nanocomposite structures of PU/Pa‐OMMT was confirmed by XRD from the disappearance of the peak due to the basal diffraction of the layer‐structured clay found in both MMT and OMMT. DSC showed that, in the presence of OMMT, the curing temperature of PU/Pa lowered by ca. 60°C for the onset and ca. 20°C for the maximum. After curing at 190°C for 1 h, the exothermic peak on DSC disappeared. All the obtained films of PU/Pa–OMMT were deep yellow and transparent. As the content of OMMT increased, both the tensile modulus and strength of PU/Pa–OMMT films increased, while the elongation decreased. The characteristics of the PU/Pa–OMMT films changed from plastics to elastomers depending on OMMT content and PU/Pa ratio. PU/Pa–OMMT films also exhibited excellent resistance to the solvents such as tetrahydrofuran, N,N‐dimethylformamide and N‐methyl‐2‐pyrrolidinone. The thermal stability of PU/Pa were enhanced remarkably even with small amount of OMMT. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4075–4083, 2003     

The modification of lanthanum‐exchanged montmorillonite with anionic surfactants to enhance the thermal stability of polyvinyl chloride

A series of thermally stable lanthanum organic montmorillonites (La‐OMMTs) were successfully prepared by modifying Na‐MMT with anionic surfactants and lanthanum chloride. Fourier transform infrared spectroscopy and X‐ray diffraction indicated that the anionic surfactants resided in the interlayer spaces and expanded the MMT basal spacing from 1.23 nm to 3.3 nm. Thermogravimetric and differential thermal analysis (TG/DTA) results showed that the intercalation of sodium dodecyl sulfonate into the lanthanum organic MMT resulted in its excellent thermal stability. The use of the La‐OMMT samples in polyvinyl chloride (PVC) resins was tested, and the TG/DTG results revealed that the three La‐OMMTs could significantly enhance the thermal stability of PVC. The modified La‐OMMT with the highest thermal stability is expected to be useful in polymer/layered silicate nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41535.     

HIPS/蒙脱土复合材料炭层结构对阻燃性能的影响

采用熔融插层法制备了不同有机蒙脱土(OMMT)及无机蒙脱土(MMT)含量的HIPS/OMMT和HIPS/MMT复合材料,并通过锥形量热仪评价了复合材料的阻燃性能;采用数码相机、扫描电镜(SEM)观察了燃烧残余物结构。结果表明,OMMT的加入显著提高了HIPS/OMMT复合材料阻燃性,而MMT的加入,HIPS/MMT复合材料的阻燃性能提高不明显。HIPS/OMMT复合材料燃烧结束形成了皮层-蜂窝层复合的炭渣结构,对其阻燃性有重要的影响。