F‐doped Ag/AgBr with enhanced visible‐light photocatalytic activity and mechanism

Novel F‐doped Ag/AgBr photocatalysts containing various amounts of F^? were synthesized by an ion exchange method. The photocatalysts were characterized using X‐ray diffraction (XRD), scanning and transmission electron microscopies, X‐ray photoelectron, ultraviolet–visible absorption and photoluminescence spectroscopies and electron spin resonance (ESR). Powder XRD revealed that F^? was inserted into the crystal lattices of AgBr and partially replaced Br^?, resulting in the contraction of the AgBr lattices. Methyl orange photodegradation experiments showed that the photocatalytic activity of F‐doped Ag/AgBr was significantly dependent on the amount of F^?. Ag/AgBr doped with 0.02 M F^? achieved the highest activity of 91% after 8 min. ESR showed the main active species in methyl orange degradation was ^?OH. The main enhancement mechanism is that F^? inhibits the recombination of electron–hole pairs.     

Nanosized Functional MOFs Loading Ag/AgBr with Throughout‐Visible‐Light Absorption for High‐Efficiency Photocatalysis

Porous metal‐organic frameworks (MOFs) loading metal nanoparticles to form a composite photocatalyst demonstrated unique advantages. Modification of the electron donating group on the aromatic linkers of MOFs could increase the absorption range of light, thereby increasing the photocatalytic activity. In this study, we prepared a composite photocatalyst using a stable NH₂‐functionalized MOF (UiO‐66‐NH₂) to load semiconductor Ag/AgBr nanoparticles, and the resultant composites have intense optical absorption throughout visible light range. The greatly enhanced optical absorption and the unique hetero‐junction between Ag/AgBr and UiO‐66‐NH₂ render efficient separation and utilization of photogenerated electron‐hole pairs. Therefore, Ag/AgBr@UiO‐66‐NH₂ showed much more excellent photocatalytic activity, compared with unmodified UiO‐66 loading Ag/AgBr (Ag/AgBr@UiO‐66) and reported AgX@MOF catalysts. Moreover, the composite photocatalysts showed excellent stability during cycling experiment.     

Efficient Visible‐Light‐Driven CO2 Reduction Mediated by Defect‐Engineered BiOBr Atomic Layers

Solar CO₂ reduction efficiency is largely limited by poor photoabsorption, sluggish electron–hole separation, and a high CO₂ activation barrier. Defect engineering was employed to optimize these crucial processes. As a prototype, BiOBr atomic layers were fabricated and abundant oxygen vacancies were deliberately created on their surfaces. X‐ray absorption near‐edge structure and electron paramagnetic resonance spectra confirm the formation of oxygen vacancies. Theoretical calculations reveal the creation of new defect levels resulting from the oxygen vacancies, which extends the photoresponse into the visible‐light region. The charge delocalization around the oxygen vacancies contributes to CO₂ conversion into COOH* intermediate, which was confirmed by in situ Fourier‐transform infrared spectroscopy. Surface photovoltage spectra and time‐resolved fluorescence emission decay spectra indicate that the introduced oxygen vacancies promote the separation of carriers. As a result, the oxygen‐deficient BiOBr atomic layers achieve visible‐light‐driven CO₂ reduction with a CO formation rate of 87.4 μmol g^?1 h^?1, which was not only 20 and 24 times higher than that of BiOBr atomic layers and bulk BiOBr, respectively, but also outperformed most previously reported single photocatalysts under comparable conditions.     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.     

One-dimensional porous Ag/AgBr/TiO<Subscript>2</Subscript> nanofibres with enhanced visible light photocatalytic activity

One-dimensional (1D) Ag/AgBr/TiO₂ nanofibres (NFs) have been successfully fabricated by the one-pot electrospinning method. In comparison with bare TiO₂ NFs and Ag/AgBr/PVP (polyvinylpyrrolidone) NFs, the 1D Ag/AgBr/TiO₂ NFs photocatalyst exhibits much higher photocatalytic activity in the degradation of a commonly used dye, methylene blue (MB), under visible light. The photocatalytic removal efficiency of MB over Ag/AgBr/TiO₂ NFs achieves almost 100 % in 20 min. The photocatalytic reaction follows the first-order kinetics and the rate constant (k) for the degradation of MB by Ag/AgBr/TiO₂ NFs is 5.2 times and 6.6 times that of Ag/AgBr/PVP NFs and TiO₂ NFs, respectively. The enhanced photocatalytic activity is ascribed to the stronger visible light absorption, more effective separation of photogenerated electron-hole pairs, and faster charge transfer in the long nanofibrous structure. The Ag/AgBr/TiO₂ NFs maintain a highly stable photocatalytic activity due to its good structural stability and the self-stability system of Ag/AgBr. The mechanisms for photocatalysis associated with Ag/AgBr/TiO₂ NFs are proposed. The degradation of MB in the presence of scavengers reveals that h⁺ and ^?O ₂ ^? significantly contribute to the degradation of MB.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

Surface Plasmon Resonance‐Enhanced Visible‐NIR‐Driven Photocatalytic and Photothermal Catalytic Performance by Ag/Mesoporous Black TiO2 Nanotube Heterojunctions

Ag/mesoporous black TiO₂ nanotubes heterojunctions (Ag‐MBTHs) were fabricated through a surface hydrogenation, wet‐impregnation and photoreduction strategy. The as‐prepared Ag‐MBTHs possess a relatively high specific surface area of ≈85 m² g^?1 and an average pore size of ≈13.2 nm. The Ag‐MBTHs with a narrow band gap of ≈2.63 eV extend the photoresponse from UV to the visible‐light and near‐infrared (NIR) region. They exhibit excellent visible‐NIR‐driven photothermal catalytic and photocatalytic performance for complete conversion of nitro aromatic compounds (100 %) and mineralization of highly toxic phenol (100 %). The enhancement can be attributed to the mesoporous hollow structures increasing the light multi‐refraction, the Ti³⁺ in frameworks and the surface plasmon resonance (SPR) effect of plasmonic Ag nanoparticles favoring light‐harvesting and spatial separation of photogenerated electron–hole pairs, which is confirmed by transient fluorescence. The fabrication of this SPR‐enhanced visible‐NIR‐driven Ag‐MBTHs catalyst may provide new insights for designing other high‐performance heterojunctions as photocatalytic and photothermal catalytic nanomaterials.     

Ultrasound‐assisted Synthesis of Ag‐ZnS/rGO and its Utilization in Photocatalytic Degradation of Tetracycline Under Visible Light Irradiation

Recent improvements based on heterojunction nanocomposites have opened new possibilities in photocatalysis. In this research, an ultrasound‐assisted coprecipitation method was used to fabricate silver, zinc sulfide and reduced graphene oxide (Ag‐ZnS/rGO) nanocomposite, and characterization results indicated that 3% Ag‐ZnS spherical nanoparticles are successfully embedded in rGO matrix. The potential of the Ag‐ZnS/rGO, as a visible light active photocatalyst, was assessed through optimizing degradation of Tetracycline (TC) by response surface methodology. It was found that the photocatalytic degradation of TC increased with an increase in the amount of nanocomposite and irradiation time, whereas it decreased with increasing the initial TC concentration. Under the optimal conditions (10 mg L^?1 of TC, 1.25 g L^?1 of Ag‐ZnS/rGO, at pH = 7, and irradiation duration 110 min), more than 90% of the TC was degraded. The study of the mechanism of the photocatalytic process disclosed that the synergistic role of surface plasmon resonance (SPR) induced by Ag nanoparticles and p‐type semiconductor feature of rGO leads to ZnS semiconductor stimulation in the visible light region. Eventually, a pseudo‐first order kinetics model was developed based on the proposed mechanism. The obtained results highlight the role of Ag‐ZnS/rGO nanophotocatalyst toward degradation of some antibiotics under visible light.     

Enhanced photocatalytic activity and stability of AgBr/BiOBr/graphene heterojunction for phenol degradation under visible light

In this work, we have reported synthesis of AgBr/BiOBr photocatalyst supported on graphene (Gr) using facile precipitation method. AgBr/BiOBr/Gr was characterized using various spectral techniques like FESEM, TEM, XRD, FTIR, XPS, Raman and PL analyses. AgBr/BiOBr/Gr had improved visible light absorption. PL studies indicated the reduction in recombination of photogenerated electron hole pair of AGBr/BiOBr/Gr. AFM analysis confirmed the thickness of AGBr/BiOBr/Gr was less than 8.0 nm. The higher dispersibility of photocatalyst was ascertained by Tyndall effect. AgBr/BiOBr/Gr photocatalyst was effectively used for the photodegradation of phenol from simulated water. The phenol degradation process was remarkably influenced by adsorption process. The concurrent adsorption and photocatalytic was effective for degradation of phenol. The phenol was completely mineralized into CO₂ and H₂O in 6 h. The degradation process followed pseudo first order kinetics. The results confirmed that integration of AgBr/BiOBr with graphene caused an increase in photocatalytic activity due to reduced recombination of photogenerated electron hole pair and electron sink behavior of graphene for photogenerated electrons of BiOBr. AgBr/BiOBr/Gr photocatalyst displayed significant stability and recyclability for ten catalytic cycles.     

Novel Bi/BiOBr/AgBr composite microspheres: Ion exchange synthesis and photocatalytic performance

Novel Bi/BiOBr/AgBr composite microspheres were prepared by a rational in situ ion exchange reaction between Bi/BiOBr microspheres and AgNO₃. The characteristic of the as-obtained ternary microspheres was tested by X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL). Under visible light irradiation, Bi/BiOBr/AgBr microspheres exhibited an excellent photocatalytic efficiency for rhodamine B (RhB) degradation, which was about 1.4 and 4.9 times as high as that of Bi/BiOBr and BiOBr/AgBr, demonstrating that the highest separation efficiency of charge carriers in the heterostructured Bi/BiOBr/AgBr. The photocatalytic activity of Bi/BiOBr/AgBr microspheres just exhibited a slight decrease after three consecutive cycles. The photocatalytic mechanism investigation confirmed that the superoxide radicals (O₂^•−) were the dominant reactive oxygen species for RhB degradation in Bi/BiOBr/AgBr suspension.     

Method for Visible Light‐Induced Photocatalytic Degradation of Methylparaben in Water Using Nanostructured Ag/AgBr@m‐WO3

An efficient method of photocatalytic degradation of methylparaben in water using Ag nanoparticles (NPs) loaded AgBr‐mesoporous‐WO₃ composite photocatalyst (Ag/AgBr@m‐WO₃), under visible light is presented. In this process, quantification of methylparaben in water was carried out by high‐performance liquid chromatography (HPLC) and the HPLC results showed a significant reduction of methylparaben in water due to the enhanced of photocatalytic degradation efficiency of Ag/AgBr@m‐WO₃. For the material synthesis, highly ordered mesoporous‐WO₃ (m‐WO₃) was initially synthesized by sol–gel method and AgBr nanoparticles (NPs) were subsequently introduced in the pores of m‐WO₃, and finally, the Ag nanoparticles were introduced by light irradiation. The enhanced photocatalytic degradation of methylparaben in water is attributed to the formation of surface plasmonic resonance (SPR) due to the introduction of Ag NPs on the surface of the catalyst. Also, the formation of heterojunction between AgBr and mesoporous‐WO₃ in Ag/AgBr@m‐WO₃ significantly inhibited the recombination of light‐induced electron‐hole pairs in the semiconductor composite. The morphological and optical characterizations of the synthesized photocatalysts (Ag/AgBr@m‐WO₃) were carried out using SEM, TEM, XDR, N₂ adsorption–desorption, UV‐VIS diffuse reflectance spectroscopy (DRS). Also, the photocatalytic studies using radical scavengers were carried out and the results indicated that ${\text{O}}_2^{·-}$ is the main reactive species.     

Synthesis and Study of Plasmon‐Induced Carrier Behavior at Ag/TiO2 Nanowires

Nanocomposites of Ag/TiO₂ nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO₂ nanowires and subsequent photoreduction of Ag⁺ ions to Ag nanoparticles (AgNPs) on the TiO₂ nanowires. The as‐prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible‐light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO₂ surface rather than by the direct transfer of charge between the two materials. The visible‐light‐driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.     

The Visible‐Light Photocatalytic Activity and Antibacterial Performance of Ag/AgBr/TiO2 Immobilized on Activated Carbon

Visible‐light‐driven Ag/AgBr/TiO₂/activated carbon (AC) composite was prepared by solgel method coupled with photoreduction method. For comparison, TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂ were also synthesized. Their characteristics were analyzed by XRD, SEM‐EDS, TG‐DSC and UV–vis techniques. Photocatalytic activity and antibacterial performance under visible‐light irradiation were investigated by ICP‐AES, ATR‐FT‐IR and spectrophotometry methods using methylene blue and Escherichia coli as target systems, respectively. The results showed that Ag/AgBr was successfully deposited on anatase TiO₂/AC surface, and exhibited a distinct light absorption in the visible region. Ag/AgBr/TiO₂/AC displayed excellent antibacterial performance both in dark and under visible‐light illumination. The growth of E. coli cell was inhibited in the presence of Ag/AgBr/TiO₂/AC in dark. Moreover, upon visible‐light illumination, a significant damage of cell membrane was noticed. Ag/AgBr/TiO₂/AC was also shown higher photocatalytic efficiency for methylene blue degradation than those of TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂. This is attributed to the synergetic effect between AC and Ag/AgBr/TiO₂, of which AC acts as the role of increasing reaction areas, continuous enriching, and transferring the adsorbed MB molecules to the surface of supported photocatalysts, and the Ag/AgBr/TiO₂ acts as a highly active photocatalyst for degrading MB molecules under visible‐light irradiation.     

Integration of Plasmonic Effects and Schottky Junctions into Metal–Organic Framework Composites: Steering Charge Flow for Enhanced Visible‐Light Photocatalysis

A wide range of light absorption and rapid electron–hole separation are desired for efficient photocatalysis. Herein, on the basis of a semiconductor‐like metal–organic framework (MOF), a Pt@MOF/Au catalyst with two types of metal–MOF interfaces integrates the surface plasmon resonance excitation of Au nanorods with a Pt‐MOF Schottky junction, which not only extends the light absorption of the MOF from the UV to the visible region but also greatly accelerates charge transfer. The spatial separation of Pt and Au particles by the MOF further steers the formation of charge flow and expedites the charge migration. As a result, the Pt@MOF/Au presents an exceptionally high photocatalytic H₂ production rate by water splitting under visible light irradiation, far superior to Pt/MOF/Au, MOF/Au and other counterparts with similar Pt or Au contents, highlighting the important role of each component and the Pt location in the catalyst.     

The investigation of Ag decorated double‐wall hollow TiO2 spheres as photocatalyst

In this paper, a novel TiO₂ nanosheets assembled double‐wall hollow sphere (DHS)has been prepared successfully via hydrothermal treatment of SiO₂@TiO₂ with the assistant of CTAB.The prepared samples are characterized with transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron spin resonance (ESR), X‐ray diffraction (XRD) and X‐ray photoelectron spectra (XPS), etc.Results show that redeposited silica species play a key role in the formation of the double‐wall structure. The as‐synthesized DHS nanostructure exhibits a large surface area (417.6 m² g^‐1) and excellent mechanical strength. Furthermore, after decoration of Ag and calcination treatment, the double‐shelled TiO₂/Ag heterostructures show an enhanced photocatalytic performance in the degradation of RhB under UV or visible light irradiations for the following reasons: the surface plasmon resonance effect of Ag, strong interaction between Ag and TiO₂ nanosheets, large surface area, excellent adsorption capacityand unique double‐wall structure. On the basis of the experimental results, a possible mechanism for pollutantdegradation under visual light irradiation has been proposed.     

Visible‐light photocatalytic activity of Ag@MIL‐125(Ti) microspheres

Ag nanoparticle (NP)‐decorated MIL‐125(Ti) microspheres (Ag@MIL‐125(Ti)) were firstly fabricated via a facile hydrothermal and following photo‐reduction method. The photocatalysts were characterized using X‐ray diffraction, scanning and transmission electron microscopies, X‐ray photoelectron spectroscopy and UV–visible diffuse reflectance spectroscopy. The characterization results indicated that Ag NPs were dispersed on the surface of MIL‐125(Ti) microspheres, and the Ag NPs had a uniform diameter of about 40 nm. The composites exhibited excellent visible‐light absorption, due to the modification with the Ag NPs. The photocatalytic activity for the visible‐light‐promoted degradation of Rhodamine B was improved through the optimization of the amount of Ag loaded as a co‐catalyst, this amount being determined as 3 wt%. Additionally, studies performed using radical scavengers indicated that O₂^? and e^? served as the main reactive species. The catalyst can be reused at least five times without significant loss of its catalytic activity. Furthermore, a photocatalytic mechanism for degradation of organics over Ag@MIL‐125(Ti) is also proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

One‐pot self‐assembly and photoreduction synthesis of silver nanoparticle‐decorated reduced graphene oxide/MIL‐125(Ti) photocatalyst with improved visible light photocatalytic activity

In recent years, tremendous research efforts have been made towards developing metal–organic framework (MOF)‐based composites for photocatalytic applications. In this work, bipyramid‐like MIL‐125(Ti) frustum enwrapped with reduced graphene oxide (rGO) and dispersed silver nanoparticles (Ag NPs) was fabricated using an efficient one‐pot self‐assembly and photoreduction strategy. The as‐obtained materials were characterized using field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, nitrogen adsorption–desorption isotherms, and X‐ray photoelectron, ultraviolet–visible diffuse reflectance and photoluminescence spectroscopies. It is found that the as‐prepared Ag/rGO/MIL‐125(Ti) ternary hybrids have large surface area, microporous structure, enhanced visible light absorption and prolonged lifetime of charge carriers. Compared with pure MIL‐125(Ti) and its binary counterparts, the ternary composite exhibits more efficient photocatalytic performance for Rhodamine B (RhB) degradation from water under visible light irradiation. The photodegradation rate of RhB on Ag/rGO/MIL‐125(Ti) is 0.0644 min^?1, which is 1.62 times higher than that of the pure MIL‐125(Ti). The improved photocatalytic performance is ascribed to the indirect dye photosensitization, the Ag NP localized surface plasmon resonance, the Ti³⁺–Ti⁴⁺ intervalence electron transfer and the synergistic effect among MIL‐125(Ti), Ag NPs and rGO. Ag NPs serve as an efficient ‘electron reservoir’ and rGO as an electron transporter and collector. Therefore, this work provides a new pathway into the design of MOF‐based composites for application in environmental and energy fields. Copyright © 2016 John Wiley & Sons, Ltd.     

Ag/BiOX (X=Cl,Br, I)复合光催化剂的制备、表征及其光催化性能

采用光化学沉积法制备了一系列不同Ag含量的新型Ag/BiOX(X=Cl,Br,I)复合光催化剂,应用X射线粉末衍射(XRD)、扫描电镜(SEM)、X射线光电子能谱(XPS)、光致发光(PL)谱、紫外-可见(UV-Vis)光谱和N2物理吸附等手段对催化剂进行表征,并以420nm<λ<660nm的可见光为光源,评价了该催化剂光催化降解酸性橙II的活性,考察了不同含量的Ag沉积对BiOX样品光催化性能的影响.N2物理吸附测试结果表明,沉积银在一定程度降低了催化剂的比表面积.UV-Vis测试结果表明,Ag能产生表面等离子共振吸收,有效增强BiOCl和BiOBr对可见光的吸收能力.PL测试结果则表明,Ag能显著抑制光生电子(e-)和空穴(h+)的复合.Ag的存在大幅度提高了BiOX对染料的光催化降解活性.当负载Ag的质量分数(w)为1%-2%时,可使BiOCl、BiOBr和BiOI光催化活性分别提高了10、13和2倍.Ag/BiOX复合光催化剂具有更高催化活性的原因是复合光催化剂对可见光有很强的吸收能力,同时产生了银等离子体光催化作用和银抑制了Ag/BiOX(X=Cl,Br,I)的光生电子-空穴的复合.     

Fabrication of dual Z-scheme photocatalyst via coupling of BiOBr/Ag/AgCl heterojunction with P and S co-doped g-C3N4 for efficient phenol degradation

Advances in noble metal mediated Z-scheme photocatalytic system have ushered in a climax on environmental remediation. Herein, graphitic carbon nitride (GCN) and phosphorus sulphur co-doped graphitic carbon nitride (PSCN) were synthesized via calcination process. GCN, PSCN and Z-scheme visible light driven (VLD) ternary BiOBr/PSCN/Ag/AgCl nanophotocatalyst were characterized by X-ray diffraction pattern (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–visible diffuse reflectance spectra (UV–vis DRS). BiOBr/PSCN/Ag/AgCl nanocomposite exhibited superior visible light driven photocatalytic ability as compared to pristine PSCN, AgCl and BiOBr towards degradation of phenol. The results explicated promising photocatalytic activity along with space separation of photocarriers caused via formation of BiOBr/PSCN/Ag/AgCl Z-scheme heterojunction. The visible light absorption efficacy of BiOBr/PSCN/Ag/AgCl photocatalyst was confirmed by photoluminescence (PL) spectra. Finally, recycling experiments were explored for the mechanistic detailing of phenol photodegradation employing BiOBr/PSCN/Ag/AgCl photocatalyst. After seven successive cycles photodegradation efficacy of photocatalyst was reduced to 90% from 98%. Proposed mechanism of BiOBr/PSCN/Ag/AgCl nanophotocatalyst for degradation of phenol was discussed. OH and O₂⁻ radicals were main reactive species responsible for photocatalytic phenol degradation.     

PO43-掺杂Bi2O2CO3/Bi0的制备及其可见光催化性能

构建氧空位以及附着金属单质Bi(Bi⁰)是增强半导体材料光吸收性能、促进半导体光生载流子分离的有效方法。通过简单的共沉淀法及氢气热还原成功制备了PO₄^3-掺杂Bi₂O₂CO₃附着Bi⁰(Bi-P-BOC)的可见光催化剂,并对其在可见光下催化降解氧氟沙星(OFX)的性能及机理进行了研究。材料表征结果表明BOC随着PO₄^3-的均匀掺杂,可见光吸收能力增强,表面缺陷增多,比表面积增大。而随着氢气热还原,BOC表面形成 Bi⁰的同时也原位构建了大量的氧空位。可见光催化性能测试表明,Bi-P-BOC可以在180 min内降解约85%的OFX,降解速率为0.013 0 min^-1,是BOC降解速率的8倍。Bi-P-BOC光催化降解机理表明其具有更好的可见光吸收能力,Bi⁰以及氧空位的存在促进了光生载流子的分离,h+是其光催化降解过程中的主要的活性氧物种(ROS),此外,¹O₂和·O₂^-也对降解有一定贡献。