吡咯聚合调控脉冲电沉积制备球形羟基磷灰石和银纳米粒子复合涂层

借助聚吡咯(PPy)的调控,采用脉冲电沉积法在生物医用金属钛表面制备出均匀的纳米HA/PPy/Ag抗菌复合涂层.考察了电解液中Py浓度、Ag~+浓度、钙磷盐浓度等对复合涂层的形貌及成分的影响.探讨了PPy聚合过程形成球形HA-NPs和Ag-NPs的形成机理,并对复合涂层的生物活性、生理稳定性及抗菌性能进行研究.研究结果表明,电解液中Py浓度的高低影响涂层的形貌,Py浓度为0.03 mol/L时有利于复合涂层的沉积.电解液中Ag~+浓度影响涂层的形貌、结晶,电解液中Ag~+浓度为0.3 mmol/L左右比较适合.电解液中Ca~(2+)浓度影响涂层的形貌及结晶,其浓度过高颗粒尺寸增大,Ca~(2+)浓度为5.0 mmol/L左右较适合.复合涂层能够诱导磷灰石的生成,使其沿着(002)晶面出现择优生长,具有较好的生物活性.PPy的加入大大降低了复合涂层中Ca~(2+)和Ag~+的释放速度,提高了复合涂层的生理稳定性.抗菌检测表明复合涂层具有良好的抗菌性.     

生物活性复合材料在生物矿化过程中的微观形貌与离子浓度变化

采用3-羟基丁酸酯-3-羟基戊酸酯的共聚物(PHBV)与磷酸三钙(TCP)、羟基磷灰石(HA)、生物活性玻璃(BG)等进行复合,获得了性能优良的生物活性骨组织工程支架材料和骨修复材料.研究和比较了3种复合材料在体外模拟生理环境中发生的生物矿化反应,对比了反应前后因矿化物的形成导致的表面微观形貌的变化,通过检测反应液离子浓度的变化对不同材料的矿化过程和生物活性进行了定量表征.研究结果表明,3种复合材料在模拟生理溶液中发生生物矿化的过程和程度不同,其中PHBV/BG的生物活性反应最为明显.     

电化学沉积含纳米银羟基磷灰石涂层及抗菌性能研究

应用柠檬酸钠还原法制得纳米银胶体溶液,并在钛基表面电泳沉积纳米银颗粒,再由电化学沉积法沉积羟基磷灰石涂层.X射线电子能谱(XPS)、X射线衍射(XRD)和高分辨透射电子显微镜(HRTEM/SEM)证实该涂层含羟基磷灰石(HAp)和Ag,其纳米银颗粒尺度为5~20 nm.抗菌试验表明,涂层中含银量随电泳沉积液纳米银粒子浓度升高而增加,抗菌性也相应增强.但如沉积液中银粒子超过一定浓度时,则其在钛表面会发生明显团聚,导致抗菌性能的降低.据此,初步优化了抗菌效果最佳的复合涂层制备技术.     

可持续释放银离子和活性氧的ZnO/Ag/rGO三元新型光催化抗菌剂（英文）

由于具有独特的物理与化学性质,银纳米粒子被广泛应用于传感器、电化学、光催化等多个领域.在生物领域,银纳米粒子可以通过释放银离子有效地解决细菌感染问题,但是其本身的毒性不可忽略.为了减小银纳米粒子的潜在毒性,迫切需要寻找一种可持续释放银离子(Ag~+)的新型复合光催化抗菌剂.已有研究报道可将银纳米粒子负载在氧化铝、凝胶和二氧化硅上形成银基抗菌材料,但是大多数材料中银纳米颗粒尺寸较大,分布不均匀,且仅靠快速释放的银离子进行抗菌.本文通过一步溶剂热法制备了ZnO/Ag/rGO三元光催化抗菌剂,其中分别由银纳米粒子和氧化锌(ZnO)形成的银离子和活性氧(ROS)可对大肠杆菌和金黄色葡萄球菌产生协同抗菌作用.负载在还原氧化石墨烯(rGO)上的银纳米粒子持续释放出微量的银离子,后者通过库仑引力牢固地吸附在带负电荷的细菌细胞膜上,从而干扰细菌DNA合成,进而使细菌丧失分裂繁殖能力;与还原氧化石墨烯和银纳米粒子复合的氧化锌可以产生更多的O_2~(·–)和·OH等自由基,具有氧化能力的自由基可分解细菌细胞膜使细菌破裂死亡.银纳米粒子的表面等离子体共振效应不仅可以拓宽氧化锌半导体材料的光吸收范围,而且可以作为电子捕获阱捕获电子,加速光生电子与空穴的分离,有效抑制光生载流子的复合.与其他银基抗菌材料相比,该材料可以实现了30天低浓度银离子持续释放,并利用产生的活性氧和银离子稳定高效地进行抗菌.采用XRD,XPS,SEM,TEM,HRTEM,PL和ESR等表征方法分析了材料的结构、形貌、化学组成、元素价态及光学性质,并通过抑菌圈、最低抑菌浓度(MIC)和最低杀菌浓度(MBC)等性能测试比较了材料的抗菌性能.XRD和XPS结果证明银和氧化锌纳米粒子成功地负载在还原氧化石墨烯上.SEM,TEM和HRTEM分析发现还原氧化石墨烯上的银和氧化锌纳米粒子分布均匀,尺寸较小(5–10 nm).PL和ESR表征表明ZnO/Ag/rGO相比于ZnO/rGO和Ag/rGO有更好的载流子分离和自由基产生能力.因此,ZnO/Ag/rGO材料对大肠杆菌和金黄色葡萄球菌具有更低的最低抑菌浓度(MIC_(E.coli)=100×10~(-6)μg/mL,MIC_(S.aureus)=80×10~(-6)μg/mL)和最低杀菌浓度,该材料在抗菌领域具有潜在的应用前景.     

钛基多孔HA/SiO2复合涂层的制备及性能研究

为了制得表面多孔且与基材结合强度高的羟基磷灰石(HA)涂层,实验中以正丁醇为分散介质,以SiO2粉末为添加剂,纯钛片为基材,电泳沉积制备羟基磷灰石/二氧化硅/壳聚糖/(HA/SiO2/CS)复合涂层,经后续热处理得到多孔HA/SiO2复合涂层,采用扫描电镜(SEM)、傅立叶红外光谱仪(FT-IR)、X射线衍射仪(XRD)、万能材料试验机对涂层的表面形貌、组成、结构和结合强度进行测试和表征,并通过模拟体液(SBF)浸泡法对复合涂层的生物活性进行评价.结果表明:当悬浮液中的HA/SiO2/CS质量比为1∶1∶1时,制得的HA/SiO2/CS涂层经700℃热处理后获得的HA/SiO2复合涂层孔洞分布均匀,大孔孔径在10～15μm,小孔孔径在1～5μm;涂层与基材的结合强度达到25.5 MPa;多孔HA/SiO2复合涂层在SBF中浸泡7 d后,涂层表面碳磷灰石化;说明实验中添加SiO2所制得的多孔HA/SiO2复合涂层与钛基材结合强度高,且具有良好的生物活性.     

聚醚醚酮复合材料表面生物活性涂层的制备与性能

以聚醚醚酮/钡玻璃粉(PEEK-BGF)复合材料为基体, 通过硅烷偶联剂, 在复合材料表面构建具有生物活性的纳米羟基磷灰石(nHA)和甲基丙烯酸酯基的光固化树脂复合涂层. 采用扫描电子显微镜(SEM)和X射线光电子能谱(XPS)分析了材料表面形貌和元素分布, 测试了涂层与复合材料之间的粘接强度. 通过检测大鼠成骨细胞总蛋白含量和碱性磷酸酶表达水平, 评价新型光固化纳米羟基磷灰石/聚甲基丙烯酸酯(nHA/PMMA)复合涂层的生物活性. 研究结果表明, nHA填充的光固化复合材料形成粗糙的表面, 随着nHA的填充量提高, 涂层表面生物学活性得到提高.     

碳纳米管/壳聚糖复合微球的原位仿生矿化及表征

对碳纳米管(CNTs)进行酸化处理, 采用乳化交联法制备CNTs/壳聚糖(CS)复合微球, 在其表面诱导羟基磷灰石仿生合成, 研究了CNTs对复合微球仿生矿化的影响, 并与纯CS微球的仿生矿化进行了对比. 利用扫描电子显微镜(SEM)、 X射线衍射仪(XRD)、 溶胀率和含水率测试等考察了复合微球矿化前后的形貌特征、 物相结构及稳定性. 结果表明, 在相同时间下, CNTs/CS复合微球表面纳米羟基磷灰石的形成能力明显优于纯CS微球, 且形态稳定性更高. 细胞实验结果表明, 与MG63细胞共培养7 d时, 矿化复合微球细胞增殖明显.     

PHBV/Sol-gel Bioglass多孔材料在模拟生理溶液中的化学反应研究

3-羟基丁酸-co-3-羟基戊酸共聚物(PHBV)/生物活性玻璃(SGBG)是一种用于骨和软骨组织工程支架的新型多孔复合材料,本文探讨了PHBV/SGBG在模拟生理溶液中的一系列化学反应,以及多孔材料在模拟生理溶液中浸泡后的成分和结构变化.研究结果表明,在SBF溶液中浸泡后,SGBG与SBF溶液的离子交换反应和PHBV的降解反应使SBF溶液的离子浓度发生变化,并在PHBV/SGBG表面形成了结晶态类骨碳酸羟基磷灰石.     

羟基磷灰石/氧化铁复合涂层的制备及其诱导骨生长的生物活性

用电泳沉积法制得羟基磷灰石/壳聚糖/氧化铁(HA/CS/Fe2O3)复合涂层,经700 ℃烧结处理得到HA/Fe2O3复合涂层。 通过SEM、EDS、XRD、FT-IR、电化学和万能材料试验机等对复合涂层的表面形貌、物相组成、抗腐蚀性和结合强度进行了表征和测试,最后采用1.5SBF浸泡法对复合涂层的生物活性进行了评价。 结果表明,当悬浮液中的HA、CS与Fe2O3质量比为100∶100∶1时,所制得的HA/Fe2O3复合涂层表面粗糙,抗腐蚀性强,具有良好的诱导骨生长生物活性,基体与复合涂层结合强度可达27.5 MPa。     

脉冲电化学沉积法制备羟基磷灰石/壳聚糖复合涂层的研究

采用脉冲电化学沉积法在钛金属表面制备出羟基磷灰石/壳聚糖(HA/CS)复合涂层,实现CS与HA在微观尺寸上的复合与杂化.比较了脉冲电位与恒电位模式下复合涂层的形成,研究了电位高低及壳聚糖浓度对复合涂层性能的影响.结果表明,与恒电位模式比较,脉冲电位下制备的涂层较均匀、结晶性好、CS含量高,并且HA与CS杂化程度高.脉冲...     

Electrophoretic deposition of hydroxyapatite–CaSiO3–chitosan composite coatings

Electrophoretic deposition (EPD) method has been developed for the fabrication of hydroxyapatite (HA)–CaSiO₃ (CS)–chitosan composite coatings for biomedical applications. The use of chitosan enabled the co-deposition of HA and CS particles and offered the advantage of room temperature processing of composite materials. The coating composition was varied by the variation of HA and CS concentrations in the chitosan solutions. Cathodic deposits were obtained as HA–CS–chitosan monolayers, HA–chitosan/chitosan multilayers or functionally graded materials (FGM) containing HA–chitosan and CS–chitosan layers of different composition. The thickness of the individual layers was varied in the range of 0.1–20 μm. The deposition yield was studied at different experimental conditions and compared with the results of modeling. It was shown that the moving boundary model for the two component system can explain the non-linear increase in the deposition yield with increasing HA concentration in chitosan solutions. The obtained coatings were studied by thermogravimetric analysis (TGA), differential thermal analysis (DTA) and scanning electron microscopy (SEM). Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies showed that these coatings provided corrosion protection of stainless steel substrates in Ringer's physiological solution. The deposition mechanism and kinetics of deposition have been discussed.     

Embedded silver ions-containing liposomes in polyelectrolyte multilayers: cargos films for antibacterial agents

A new antibacterial coating made of poly(L-lysine)/hyaluronic acid (PLL/HA) multilayer films and liposome aggregates loaded with silver ions was designed. Liposomes filled with an AgNO 3 solution were first aggregated by the addition of PLL in solution. The obtained micrometer-sized aggregates were then deposited on a PLL/HA multilayer film, playing the role of a spacer with the support. Finally, HA/PLL/HA capping layers were deposited on top of the architecture to form a composite AgNO 3 coating. Release of encapsulated AgNO 3 from this composite coating was followed and triggered upon temperature increase over the transition temperature of vesicles, found to be equal to 34 degrees C. After determination of the minimal inhibitory concentration (MIC) of AgNO 3 in solution, the antibacterial activity of the AgNO 3 coating was investigated against Escherichia coli. A 4-log reduction in the number of viable E. coli cells was observed after contact for 120 min with a 120 ng/cm (2) AgNO 3 coating. In comparison, no bactericidal activity was found for PLL/HA films previously dipped in an AgNO 3 solution and for PLL/HA films with liposome aggregates containing no AgNO 3 solution. The strong bactericidal effect could be linked to the diffusion of silver ions out of the AgNO 3 coating, leading to an important bactericidal concentration close to the membrane of the bacteria. A simple method to prepare antibacterial coatings loaded with a high and controlled amount of AgNO 3 is therefore proposed. This procedure is far superior to that soaking AgNO 3 or Ag nanoparticles into a coating. In principle, other small bactericidal chemicals like antibiotics could be encapsulated by this method. This study opens a new route to modify surfaces with small solutes that are not permeating phospholipid membranes below the phase transition temperature.     

脉冲电沉积制备HA/ZrO2纳米复合涂层的稳定性及生物相容性评价

采用脉冲电化学沉积法成功地在生物医用钛金属表面制备出均匀的纳米HA/ZrO₂复合涂层. 通过热处理提高涂层的致密性, 同时保留涂层的微纳结构. 考察了热处理后复合涂层的成分、形貌、生物相容性及生理稳定性. X射线衍射分析表明, 复合涂层成分为HA和ZrO₂. 扫描电镜观察发现, 热处理后复合涂层的致密性有所提高. 研究发现, ZrO₂的加入大大降低了HA/ZrO₂复合涂层中钙离子的释放速度, 提高了HA/ZrO₂复合涂层的生理稳定性. 纳米划痕实验结果表明, HA/ZrO₂复合涂层具有较好的结合强度. 通过培养成骨细胞考察了复合涂层的生物相容性. Alamar Blue检测表明, HA/ZrO₂复合涂层表面细胞黏附及增殖能力较好. ALP检测发现, 热处理后HA/ZrO₂复合涂层表面的细胞分化能力较强. 综合细胞培养结果显示, HA/ZrO₂复合涂层有较好的生物相容性.     

造孔剂对电泳沉积制备多孔HA涂层及其生物活性的影响

采用水热法制得的羟基磷灰石(HA)纳米粉体,分别与造孔剂葡萄糖(Glu)、壳聚糖(CS)、炭粉(C)3种微粒(＜38.5 μm)配置成质量比1∶1的悬浮液,电泳沉积 烧结制备钛基多孔HA涂层,并对制得的3种多孔HA涂层在模拟体液浸泡前后的表面形貌、化学组成及物相变化进行表征。 结果表明,经700 ℃烧结处理后制得的3种多孔HA涂层在1.5倍人体模拟体液中浸泡5 d后,多孔HA涂层表面均被层状生长的碳磷灰石颗粒完全覆盖,颗粒直径在5~25 μm,说明这些多孔HA涂层均具有良好的生物活性。 其中以CS为造孔剂制得的多孔HA涂层结合强度最高,达19.5 MPa,有望开发成为新型的人骨植入生物陶瓷材料。     

HA/CuO/SrCO3梯度复合涂层的制备及体外生物活性

在羟基磷灰石(HA)悬浮液中, 以正丁醇为分散介质, 三乙醇胺为乳化剂, 成骨微量元素化合物CuO 和SrCO₃作为添加剂, Ti片为基材, 壳聚糖(CS)为造孔剂, 依次通过区带电泳分布并在反向电场作用下电 泳沉积, 得到HA/CS/CuO/SrCO₃复合涂层, 经700 ℃高温煅烧2 h后, 制得HA/CuO/SrCO₃复合涂层. 通过X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)、 场发射扫描电子显微镜(FESEM)、 能量色散光谱仪(EDS)、 劳埃德万能材料试验机、 电化学工作站、 模拟体液培养和抑菌实验等手段对复合涂层进行测试与表征. 结果表明, Ca, Cu和Sr 元素含量在HA/CuO/SrCO₃复合涂层的径向上均呈现梯度分布; 复合涂层与钛基材的结合强度达33.0 MPa; 循环伏安(CV)曲线和Tafel极化曲线测试表明, 复合涂层在N-2-羟乙基哌嗪-N′-2-乙磺酸(HEPES)模拟体液(H-SBF)中电化学性能稳定, 耐腐蚀性较强; 在H-SBF中培养24 d后, 复合涂层表面完全碳磷灰石化; 抑菌实验发现, 复合涂层粉末对大肠杆菌和金黄色葡萄球菌的抑菌率分别为81.82%和71.86%.     

Novel Method to Graft Chitosan on the Surface of Hydroxyapatite Nanoparticles via ＂Click＂ Reaction

In order to tune the surface properties of hydroxyapatite（HA） nanoparticles and prevent them from ag- gregation, an efficient method was proposed to graft chitosan（CS） molecules on the surface of HA via ＂click＂ reac- tion. Thermal gravimetric analysis（TGA） shows that CS was successfully grafted on the surface of HA nanoparticles and the grafting amount was about 8.9 g of CS on per hundred grams of HA. The grafted chitosan chains can prevent HA nanoparticles from aggregation and greatly enhance the colloidal stability of HA in water. The 3-（4,5-dimethylthiazoyl-2-yl）-2,5-diphenyltetrazolium bromide（MTT） assay demonstrats that the cytotoxicity of CS modified HA（HA-CS） is negligible and thus HA-CS may find potential application in biomedical fields.     

Preparation,characterization, and antibacterial activity of organo-sepiolite/chitosan/silver bionanocomposites

Bionanocomposites with different loadings of silver (Ag) were prepared via synthesis of Ag nanoparticles (AgNPs) using the wet chemical reduction method in the lamellar space layer of the organo-sepiolite/chitosan (O-SEP/CS). The prepared O-SEP/CS/Ag bionanocomposites were characterized using various analysis methods for their structure, morphology, and optical properties. The characteristic absorption bands from the UV–visible absorption spectrum confirmed the formation of AgNPs. The antibacterial activities of O-SEP/CS/Ag bionanocomposites were investigated against gram-positive and gram-negative bacteria using the disc diffusion method. The results suggest that O-SEP/CS/Ag bionanocomposites can be useful in wide range of bio-medical applications because of high antibacterial activity.