Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Machine Learning towards Screening Solid-state Lithium Ion Conductors

Machine learning is an emerging method to discover new materials with specific characteristics.An unsupervised machine learning research is highlighted to discover new potential lithium ionic conductors by screening and clustering lithium compounds,providing inspirations for the development of solid-state electrolytes and practical batteries.     

Surface defect-rich ceria quantum dots anchored on sulfur-doped carbon nitride nanotubes with enhanced charge separation for solar hydrogen production

Designing defect-engineered semiconductor heterojunctions can effectively promote the charge carrier separation.Herein,novel ceria(CeO2) quantum dots(QDs) decorated sulfur-doped carbon nitride nanotubes(SCN NTs) were synthesized via a thermal polycondensation coupled in situ depositionprecipitation method without use of template or surfactant.The structure and morphology studies indicate that ultrafine CeO2 QDs are well distributed inside and outside of SCN NTs offering highly dispersed active sites and a large contact interface between two components.This leads to the promoted formation of rich Ce³⁺ ion and oxygen vacancies as confirmed by XPS.The photocatalytic performance can be facilely modulated by the content of CeO2 QDs introduced in SCN matrix while bare CeO2 does not show activity of hydrogen production.The optimal catalyst with 10% of CeO2 loading yields a hydrogen evolution rate of 2923.8 μmol h-1 g-1 under visible light,remarkably higher than that of bare SCN and their physical mixtures.Further studies reveal that the abundant surface defects and the created 0 D/1 D junctions play a critical role in improving the separation and transfer of charge carriers,leading to superior solar hydrogen production and good stability.     

Superfast and solvent-free core-shell assembly of sulfur/carbon active particles by hail-inspired nanostorm technology for high-energy-density Li-S batteries

The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^-2 delivers a stable area capacity of 6.6 mAh cm^-2 over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^-2 over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.     

CXN天然沸石的研究2: 吸附性质

采用N~2,NH~3,CO~2,乙烯,丙烯,水,甲醇,乙醇,丙醇等作为吸附剂,研究了由我国CXN天然沸石改性制得的H-STI和Na-STI沸石的吸附性质,H-STI和Na-STI沸石的BET表面积及微孔孔体积约为420m^2/g和0.20m^3/g。根据NH~3和CO~2在H-STI沸石上的吸附等温线计算得到它们的吸附热分别为44.8和26.5kJ/mol。乙烯,丙烯,甲醇,乙醇,丙醇等在Na-STI沸石上的吸附等温线表明该沸石对有机分子的吸附具有链长选择性。在低分压下水相对于甲醇的吸附量表明沸石具有一定的疏水性质。     

常温常湿条件下Au/MeO~x催化剂上CO氧化性能

利用共沉淀法制备了Au/MeO~x催化剂(Me=Al,Co,Cr,Cu,Fe,Mn,Ni,Zn)。在常温常湿条件下,考察了不同氧化物负载的金基催化剂的CO氧化性能。结果表明,氧化物种类对催化剂的活性和稳定性均有较大的影响。Cu,Mn,Cr等氧化物负载的金基催化剂的活性较差,而Zn,Fe,Co,Ni,Al等金属氧化物负载的金基催化剂可将CO完全氧化,又具有一定的稳定性,在相同反应条件下,CO完全转化时的稳定性顺序为Au/ZnO>Au/α-Fe~2O~3>Au/Co~3O~4>Au/γ-Al~2O~3≈Au/NiO。还发现水对Au/MnO~x催化剂的活性和稳定性有负作用,而对180℃焙烧制备的Au/ZnO-180催化剂的活性和稳定性均有明显的湿度增强作用。     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

无机晶须材料的合成与应用

本文综述了无机晶须材料的合成与应用研究现状.近年来我国在这一研究领域取得了很大发展,以"硼酸铝晶须产业化"项目为代表的无机晶须材料的工业化生产,无疑将对我国高技术新材料的发展起极大的促进作用.本文还对几种典型的无机晶须材料--SiC晶须、Al18B4O33晶须、K2Ti6O13晶须、CaCO3晶须、Mg2B2O5晶须、莫来石晶须的合成与应用研究现状作了概述,并就其研究前景作了展望.     

Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics

Hot-pressed zirconium diboride (ZrB₂) matrix composites containing 0–30 vol% silicon carbide (SiC) whiskers have been investigated to determine the effect of composition (i.e. amount of SiC whiskers) on the microstructure, mechanical properties and thermal properties. With increasing SiC whisker volume contents, the flexural strength and fracture toughness of the composites were improved compared to those of monolithic ZrB₂. Flexural strength increased from 629 MPa for pure ZrB₂ to 767 MPa for ZrB₂–30 vol%SiCw. Likewise, fracture toughness ranged from 5.4 to 7.1 MPa m^1/2 over the same composition range. Specific heat capacity increased with SiC whisker addition, while thermal diffusivity and thermal conductivity decreased slightly with the increase of SiC whisker content.     

MgSO4·5Mg(OH)2·3H2O的水热合成及反应时间对其形貌的影响

Both whisker and nanometer MgSO₄·5Mg(OH)₂·3H₂O(MOS) were prepared by hydrothermal method at 140℃ for different times， using NaOH and MgSO₄·7H₂O as raw materials. The MgSO₄·5Mg(OH)₂·3H₂O part- icles were characterized by powder X-ray diffraction(XRD)，thermal analysis(TGA-DSC)， infrared spectroscopy(FT-IR)，transmission electron microscopy(SEM) and scanning electron microscopy(TEM). The size distribution in whisker-like and nanocrystalline materials are in the range of 10～50μm and 10～20nm respectively. The whisker MOS is metastable phase in MgSO₄-NaOH-H₂O system at 140℃，whereas nanometer MOS is stable phase.     

MgSO_4·5Mg(OH)_2·3H_2O的水热合成及反应时间对其形貌的影响(英文)

０IntroductionWhiskerswithhighaspectratiohavebeenexten－sivelyusedascompositematerialsinalloys，ceramics，cementandplastic犤１～５犦，sincetheyhavespecificdesirepropertiessuchashighmeltingpoint，lowdensityandhighmodulus犤６犦．Magnesiumoxysulfate（MOS）com－poundshowsthehighcrystallinityandaspectratiotomakeitapotentialreinforcingmaterialforplastics，resinandrubber犤７，８犦．Inpastyears，MgSO４·５Mg（OH）２·３H２Ohasbeensynthesizedbyhydrothermalreactionusingmagnesiumhydroxideandmagnesium…     

Structures and Properties of Cast Irons Reinforced by Trace Addition of Modified SiC Nanopowders

"To improve the performance of traditional cast iron, trance amount of surface modified nanometer SiC powders were added into the melted iron. The microstructures, the mechanical properties, as well as the wear resistance were investigated. The trace addition of SiC nano-powders were active due to the presence of structural defects arising from the treatment, they were eoient in affecting not only the generation and growth of crystals but also change the morphology of graphite. On the other hand, the addition of SiC nanopowders as heterogeneous seedings in the crystallization of liquid metals lead to the changing of supercooling temperature, so the ratio of ferrite and pearlite was changed. The mechanical characteristics and wear resistance were enhanced as a result of the improved graphite shape and changed matrix composition caused by the trace addition of SiC nanopowders (in amounts of about 0.01% mass). The strengthening mechanism and the free gap between powders were also discussed. It is suggested that the tensile strength, toughness, as well as the wear resistance can be improved simultaneously, which indicates the novel strengthening technology by trace addition of nanopowders is promising to extend to large-scale industrial production."     

Fabrication of SiC and Si3N4 Whiskers under Pressurized Ar and N2 Atmosphere through High‐Energy Ball Milling

SiO_{2 (activated or mesoporous silica)}/Mg_{(magnesiothermic or metal sintering aid)}/C_{(activated or polymeric carbon)}/N_{2 (atmosphere)} systems were used in the one‐step synthesis of β‐SiC and β‐Si₃N₄ whiskers. In this study, a mixture of the active precursors was allowed to react via a self‐sustaining reaction (high‐energy ball milling process). Scanning electron micrographs and X‐ray diffraction (XRD ) analysis showed that the rod‐like SiC whiskers (~800 µm) were synthesized in situ by the direct carbothermal reduction of silicon nitride (or silicon) with activated carbon in N₂ (or Ar) atmosphere. The results show that β‐Si₃N₄ (without β‐SiC ) was fully formed after 5 h of milling with four different morphologies, namely whisker tip (droplet/no droplet) and nonuniform whiskers (short hexagonal/rhombohedral/rod‐like) with a length of 0.1–400 µm. By adding metal sintering aids, the liquid phase Mg–Si–O–N and the rate of carbothermal reduction increased (enhanced densification via particle rearrangement) and their hexagonal whiskers tended to assume a rod‐like shape. The effect of the concentration of CO (reduction of α‐Fe₂O₃ to Fe by CO ) on the whisker synthesis suggests that, in addition to the concentration of CO , the nature of the family of mesoporous silica/carbon template is an important factor in the synthesis of β‐SiC and β‐Si₃N₄ whiskers. The possible chemical reactions were investigated by studying the unwanted phases (MgO , Si, SiC , Fe₂O₃ , Fe₃O₄ , FeO , Fe, Fe₃C , MgCO₃ ) of comparable XRD graphs.     

MECHANICAL PROPERTIES OF SMC WHISKER REINFORCED HIGH DENSITY POLYETHYLENE COMPOSITES

A new type of SiO_2-MgO-CaO (SMC) whisker was used to modify high density polyethylene (HDPE).The melting behavior and crystallinity were investigated by differential scanning calorimetry (DSC).The dispersion of whiskers and interfacial adhesion in the prepared HDPE/SMC whisker composites were investigated by scanning electron microscopy (SEM).The mechanical properties were evaluated by mechanical tests and dynamic mechanical analysis (DMA).DSC data indicated that the melting temperature and the crystall...     

A New Route to High Yield Mesostructure Boron Carbide Powder from SiC/Si3N4 Whiskers

Boric acid/Mg (magnesiothermic or metal sintering aid)/C (activated carbon)/N₂ or Ar (atmosphere)/additives (mesoporous SiO₂ or mesoporous SiC or SiC/Si₃N₄ whiskers) systems were used in the one‐step synthesis of mesostructured B₄C (221.04 m²/g). In this study, a mixture of the active precursors was allowed to react via a self‐sustaining reaction (high‐energy ball milling process). Also, the properties of the samples prepared using powdered activated carbon (PAC) and SiC/Si₃N₄ whiskers (concentration in the range 5–10 wt%) as sources of carbon were investigated. X‐ray diffraction results proved the presence of crystalline boron carbide in the peak positions of B₄C (B₁₂C₃). The advantage of the present route for yielding mesostructured B₄C powder seems to be limited by the growth of carbide crystals. This restriction is believed to be imposed by a lack of whisker additives around the pores where B₄C crystals grow. The results also show that the best mesoporous additive for the synthesis of nanoscale boron carbide is mesoporous SiC. The effect of the concentration of CO (reduction of α‐Fe₂O₃ to Fe by CO) on the B₄C synthesis suggests that, in addition to the concentration of CO, the pressure of the N₂ atmosphere is an important factor in the synthesis of mesostructured B₄C.     

Cationic Grafting of Vinyl Polymers onto a Carbon Whisker,Initiated by Acylium Perchlorate Groups Introduced onto the Surface

Abstract

The cationic graft polymerization of vinyl monomers onto a carbon whisker, vapor-grown carbon fiber, initiated by acylium perchlorate groups introduced onto the surface, was investigated. The introduction of acylium perchlorate groups onto a carbon whisker was achieved by the treatment of a carbon whisker having acyl chloride groups, which were introduced by the reaction of surface carboxyl groups with thionyl chloride, with silver perchlorate in nitrobenzene. It was found that the cationic polymerization of vinyl monomers, such as styrene, indene, N-vinyl-2-pyrrolidone, and n-butyl vinyl ether, is initiated by acylium perchlorate groups on a carbon whisker. In the polymerization, the corresponding vinyl polymers were grafted onto a carbon-whisker surface based on the propagation of polymer from the surface: the percentage of grafting of polystyrene and polyindene reached 42.5 and 100.3%, respectively. The percentage of polystyrene grafting decreased with increasing polymerization temperature because of preferential chain transfer reactions at higher temperatures. Polymer-grafted carbon whisker gave a stable colloidal dispersion in a good solvent for grafted polymer.     

ADSORPTION BEHAVIOR OF Pb(Ⅱ) ON POTASSIUM HEXATITANATE WHISKER BY FAAS

Based on the advantage of high surface area and strong adsorption ability of potassium hexatitanate whisker, a method to determine trace Pb(Ⅱ) content by combining solid phase extraction with Flame atomic absorption spectrometry (FAAS) was established.The adsorptive behavior of potassium hexatitanate whisker to Pb(Ⅱ), primary influencing factors of adsorption and elation and effect of coexistence ions were investigated systemically.The optimal analytical conditions were discussed and examined.It was found that the adsorption rate of potassium hexatitanate whisker to Pb(Ⅱ) was 100% at pH 4.0.Pb(Ⅱ) could be elated from potassium tetratitanate whisker with HCI (2mol/L) under boiling water for 30min.The detection limit was 5.75ng/mL, and relative standard deviation was 1.66% (n=9, CPb=2.0μg/mL).