共查询到18条相似文献,搜索用时 484 毫秒
1.
2.
3.
巯基树脂对金属离子的吸附性能(Ⅱ) 总被引:3,自引:0,他引:3
研究了自合成的巯基树脂对重金属离子Ag 、Hg2 、Cr3 的吸附容量、吸附动力学、等温吸附过程等静态吸附性能,影响吸附的因素和吸附机理.结果表明,该树脂对上述3种离子吸附能力强,吸附量分别达6.56mmol/g、3.25mmol/g、2.10mmol/g.树脂对各重金属离子等温吸附在实验浓度范围内符合Langmuir或Freundlich方程.吸附机理研究表明,巯基与金属离子发生了离子交换和配位反应,化学吸附起支配作用;另外树脂对Ag 、Hg2 吸附过程中存在一定的氧化还原现象. 相似文献
4.
D301大孔树脂吸附钒(V)的性能研究 总被引:3,自引:0,他引:3
研究了D301大孔树脂对钒的吸附性能.结果表明,pH值对D301树脂吸附钒的影响很大,与钒在溶液中的赋存状态有关,且在pH=2时吸附效果最好:测得吸附热力学参数分别为:△H=8.97kJ/mol,△G_(313)=-5.69kJ/mol,△G_(303)=-5.2kJ/mol,△G_(293)=-4.9kJ/mol,△S=46.84J/mol·K.等温吸附服从Freundlich经验式;考察了溶液浓度、搅拌速率对交换过程的影响,并对实验数据运用相关理论模型进行拟合,结果显示钒(V)在D301树脂上吸附交换过程控制步骤为颗粒扩散控制,反应级数n为0.2391. 相似文献
5.
CMC-Na/DETA-B62型蛇笼树脂对金属离子的吸附性能 总被引:1,自引:0,他引:1
本文研究了自合成的蛇笼型螯合树脂-二乙烯三胺交联甘油环氧树脂/羰甲基纤维素体系对Cd^2 ,Pb^2 ,Fe^2 的吸附量,吸附动力学,等温吸附过程等静态吸附性能,同时研究了pH值等因素对吸附性能的影响。实验结果表明,该树脂对Cd^2 具有较强的吸附选择性,能在Cd^2 ,Pb^2 ,Fe^2 3种离子共存时选择吸附Cd^2 ,其选择性系数分别为Kcd^2 /pb^2 =3.77,Kcd^2 /Fe^2 =9.61。该树脂对上述3种离子的吸附量可分别达4.00,1.06,0.42mmol/g。该类树脂可用于含重金属离子污水的处理和金属离子的分离等方面。 相似文献
6.
合成了新型螯合树脂聚苯乙烯负载葡糖胺(PS-GA)。研究了树脂对Pt(Ⅳ)的吸附容量、吸附动力学、等温吸附等静态吸附性能及影响吸附的因素。结果表明,该树脂对Pt(Ⅳ)的吸附量较高;吸附动力学研究证明树脂对Pt(Ⅳ)的吸附为液膜扩散控制,吸附的活化能通过计算得10.31kJ/mol;树脂对Pt(Ⅳ)的等温吸附,与Freundlich方程相比,更加符合Langmuir方程;计算了等温吸附过程的热力学参数ΔG,ΔH,ΔS值;升高温度有利于吸附;树脂可用2%硫脲~0.1mol/LHCl溶液清洗再生,5次再生后仍保持良好的吸附能力,适合重复使用。 相似文献
7.
5-Br-PADAP显色树脂相吸光光度法测定微量Co(Ⅱ) 总被引:1,自引:0,他引:1
在pH 4.80的弱酸介质中,Co(Ⅱ)与5-Br-PADAP生成有色配合物,酸化后与强酸性阳离子交换树脂交换吸附,可进行树脂相吸光光度法测定微量Co(Ⅱ)。最大吸收波长为610nm,表观摩尔吸光系数为3.6×10~5·Co(Ⅱ)含量在0~6.5μg/25ml范围内符合比耳定律。用此法测定天然水和维生素B_(12)中Co(Ⅱ)含量,结果满意。 相似文献
8.
研究了自合成的蛇笼型螯合树脂三乙烯四胺交联甘油环氧树脂/羧甲基纤维素体系对Ag^ 、Cr^3 、Hg^2+的吸附量,吸附动力学,等温吸附过程等静态吸附性能,同时研究了PH值等因素对吸附性能的影响。实验结果表明,该树脂对Ag^ 、Cr^3 具有较强的吸附选择性,在Ag^ 、Cr^3 、Hg^2+3种离子共存时能选择吸附Ag^ ,其选择性系数分别为KAg/Hg^2 =10.31、KAg^ /Cr^3 =1.77,KCr^3 /Hg^2 =5.83。该树脂对上述3种离子的吸附量分别达2.99mmol/g、1.69mmol/g、0.29mmol/g,该类树树可用于含重金属离子污水的处理和金属离子的分离等方面。 相似文献
9.
用离子交换树脂法吸附柠檬酸溶液中的金属离子,苯乙烯系阳离子交换树脂的吸附性能较好,它对镍、铝离子的吸附容量均较大,且吸附前后柠檬酸溶液的浓度变化较小.静态条件下树脂对镍的吸附容量为16.83mg Ni/g干树脂,对铝为21.36mg Al/g干树脂;动态条件下树脂对镍的吸附容量为6.78mg Ni/g干树脂,对铝为31.8mgAl/g干树脂,吸附液流速为1m/h~3m/h.吸附后的柠檬酸溶液可循环使用.当用1mol/L硫酸解吸时,树脂对镍铝的解吸率可达90%以上.当硫酸中Ni2 为1.70mmol/L,Al3 为7.40mmol/L时,树脂的解吸率仍可达80%以上. 相似文献
10.
以γ-射线预辐照,在聚丙烯(PP)纤维上接枝丙烯酰胺(AAm),再经过Hofmarm降解反应制备弱碱性离子交换纤维(PP-g-YAm)交换容量达到5.47mmol/g干纤维.研究了PP-g-VAm纤维对链霉素的吸附和解吸性能.其吸附等温曲线符合Langmiur吸附等温式.静态吸附试验表明,PP-g-AAm纤维对链霉素的吸附量可以达到446.96mg/g千纤维,脱附率达到98.9%. 相似文献
11.
巯基树脂对重金属离子的吸附性能 总被引:16,自引:1,他引:16
研究了自合成的巯基树脂对重金属离子Pb^2 、Cu^2 、Cd^2 .Ni^2 、Co^2 的吸附容量、吸附动力学、等温吸附过程等静态吸附性能,同时研究了影响吸附的因素和吸附机理.结果表明,该树脂对软酸型重金属离子吸附容量高.pH=5.0-5.7,低温有利于吸附,树脂对各重金属离子等温吸附在实验浓度范围内均符合Langmuir和Freundnch方程.吸附机理研究表明,巯基与重金属离子发生了离子交换和配位反应,化学吸附起支配作用。 相似文献
12.
Cation exchange resin, Amberlite IR-120, has been modified by the sorption of 1-(2-pyridylazo)-2-napthol (PAN) at pH 6.0. The optimum conditions for the sorption of PAN on the resin have been established. The maximum sorption of PAN was found to be 8.70 micromol/g. In order to explore the separation possibilities of the material, distribution coefficients of a number of metal ions were determined in various solvent systems. A number of binary separations of metal ions of analytical interest have been carried out using columns packed with this material. In order to demonstrate the practical utility of this material, Zn2+ and Hg2+ have been selectively separated from synthetic mixtures of metal ions and assay of Zn2+ and Fe2+ in commercially available pharmaceutical tablets; namely Fesofor-Z and FE-Z, was carried out. 相似文献
13.
大孔聚丙烯醛-呋喃-2-硫代酰腙螯合树脂的合成及其性能的初步研究 总被引:1,自引:0,他引:1
合成了一新型高分子骨架,大孔内烯醛-苯乙烯-二乙烯苯三元共聚物树脂骨架,通过其含有的活泼醛基与呋喃-2-硫代酰肼螯合剂进行高分子反应,制备了一种含氮、硫配位原子的螯合树脂,聚丙烯醛-呋喃-2-硫代酰腙。对其与贵金属离子的吸附性能进行了初步研究,结果表明,该树脂对金、钯及铂具有选择性吸附作用,吸附容量分别为1.20mmol/g干树脂,0.37mmol/g干树脂及0.28mmol/g干树脂。 相似文献
14.
15.
Synthetic functionalized terpolymeric resin for the removal of hazardous metal ions: synthesis,characterization and batch separation analysis
下载免费PDF全文
![点击此处可从《先进技术聚合物》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Raja S. Azarudeen Mohamed A. Riswan Ahamed M. Thirumarimurugan N. Prabu D. Jeyakumar 《先进技术聚合物》2016,27(2):235-244
An effectual functionalized synthetic resin involving anthranilic acid/4‐nitroaniline/formaldehyde was synthesized for the detoxification of hazardous metal ions. The resin was characterized by Fourier transform infrared, 1H, and 13C nuclear magnetic resonance spectroscopy, and its morphology was established through scanning electron microscope and X‐ray diffraction. The resin was analyzed by thermogravimetric analysis to assess the thermal stability, in which the resin could be used in high temperature aqueous solutions for the elimination of harmful metal ions. The ion‐exchange property of the resin was evaluated by batch technique for specific metal ions viz. Fe3+, Co2+, Ni2+, Cu2+, Zn2+, and Pb2+. The study was extended to three variations such as effect of metal ion uptake in the presence of various electrolytes in different concentrations, effect of pH, and effect of contact time. The outcome proved that the resin can be used as a strong cation‐exchanger to remove various metal ions from the solutions. The resin could be regenerated and reused with quantitative recovery of metal ions for few cycles. On comparison with the earlier reported resins, the synthesized resin has found excellent capability of metal ion recovery. The resin possesses an utmost ion‐exchange capacity, which is in good harmony with isotherm models and kinetics. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
16.
17.