Synthesis of anatase nanostructured TiO2 particles at low temperature using ionic liquid for photocatalysis

Anatase nanostructured TiO₂ particles were synthesized at low temperature by a modified sol–gel method using water immiscible room temperature ionic liquid as an effective template. Anatase phase was formed at low temperature (100 °C) by effective aggregation of TiO₂ particles with a self-assembled IL in the sol. The photocatalytic activity of the prepared sample was tested for the degradation of 4-chlorophenol. The TiO₂ particle prepared with ionic liquid showed higher photocatalytic activity than that prepared with the conventional sol–gel method under identical conditions.     

Li–Y doped and codoped TiO2 thin films: Enhancement of photocatalytic activity under visible light irradiation

Sol−gel synthesis based on the self-assembling template method has been applied to synthesize Li–Y doped and co-doped TiO₂ not only to improve simultaneously the structural and electronic properties of TiO₂ nanomaterials but also to achieve Li–Y doping of titania with high photocatalytic reactivity. The characterization of the samples was performed by GXRD, GSDR, FT-IR, and Raman spectroscopy. According to the GXRD patterns, all the observed reflections can be indexed using the anatase form of TiO₂, Which is confirmed by ground state diffuse reflectance and micro-Raman spectra. The Li–Y doped titania materials immobilized as nanostructured thin films on glass substrates exhibit high photocatalytic efficiency for the degradation of toluidine and benzoic acid under visible light irradiation. The development of these visible light-activated nanocatalysts has the potential of providing environmentally benign routes for water treatment.     

Hydrothermal growth of TiO2 nanowire membranes sensitized with CdS quantum dots for the enhancement of photocatalytic performance

In this paper, TiO₂ nanowires (NWs) on Ti foils were prepared using a simple hydrothermal approach and annealing treatment. CdS quantum dots (QDs) were assembled onto the crystallized TiO₂ NWs by sequential chemical bath deposition. Ultraviolet-visible absorption spectra showed that CdS adds bands in the visible to the TiO₂ absorption and exhibited a broad absorption band in the visible region, which extended the scope of absorption spectrum and helped improve the photocatalytic degradation efficiency. The results of photocatalytic experiment revealed that CdS-TiO₂ NWs possessed higher photocatalytic activities toward methyl orange than pure TiO₂ nanowires. The degradation efficiency of 96.32% after ten cycles indicated that the as-prepared CdS-TiO₂ composite exhibited excellent long-time recyclable ability and can be reused for the degradation of contaminants.     

A novel deposition precipitation method for preparation of Ag-loaded titanium dioxide

Ag/TiO₂ photocatalysts were prepared by a novel deposition precipitation method. Formation of Ag nanoparticles on the surface of TiO₂ was confirmed by XRD, HRTEM and XPS. The photocatalytic activity of Ag/TiO₂ was tested with the photocatalytic degradation of methyl orange and found effectively enhanced. The optimum content of Ag for photocatalytic activity is about 2.0 wt%.     

Photoassisted mineralization of remazole red F3B over NiO/TiO2 and CdO/TiO2 nanoparticles under simulated sunlight

In this work, a series of titania-supported NiO and CdO materials were synthesized by a modified sol-gel process. The prepared photocatalysts were characterized by X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), and transmission electron microscopy (TEM). The activities of titania-supported NiO and CdO photocatalysts for photocatalytic degradation of Remazole Red F3B (RR) dye, under simulated sunlight, were investigated. The photocatalytic mineralization of an RR dye solution over various NiO-x/TiO₂ and CdO-x/TiO₂ photocatalysts under simulated sunlight was investigated. It was worthy noticing that the photocatalytic activity of titania improved using the prepared catalysts. The prepared TiO₂, NiO-5/TiO₂, and CdO-2/TiO₂ photocatalysts exhibited higher photocatalytic activity under simulated sunlight than did commercial TiO₂. The prepared photocatalysts were stable after photocatalytic degradation of the dye. The observed photocatalytic mineralization of the dye was 51 and 71% over NiO-10/TiO₂ and CdO-2/TiO₂ after 180 min of irradiation, respectively. Juxtaposing a p-NiO-5/TiO₂ semiconductor provided a potential approach for decreasing charge recombination. The prepared photocatalystsNiO-5/TiO₂ and CdO-2/TiO₂ are promising composites for the solar detoxification of textile wastewater.     

Surface modified nanostructured-TiO<Subscript>2</Subscript> thin films for removal of Congo red

We synthesized nanostructured TiO₂ thin films by the modified sol-gel template method using the polyethylene glycol as filler media. The TiO₂ surface modification for both the thin films, i.e., template and non-template, was done with the ascorbic acid. All the four thin film samples, S1 (TiO₂ (non-template), TiO₂ (template), S3 (S1 modified with ascorbic acid) and S4 (S2 modified with ascorbic acid), were characterized by various analytical methods. Phase evaluation was monitored by the X-Ray diffraction analysis. Moreover, the thin films particle sizes were obtained to be 22.32, 21.20, 14.52 and 16.77 nm, respectively for the samples S1, S2, S3 and S4. The changes in particle size and morphology due to the PEG and ascorbic acid were determined by scanning electron microscopy (SEM). Similarly, thermal gravimetric (TG) and differential scanning calorimetry (DSC) were performed to determine the decomposition behavior of organic compound present in the solid samples. The functional groups were determined by infrared (IR) analysis. The photocatalytic efficiency, as a reference of Congo red, was conducted using all the four samples of TiO₂ thin films. Complete photocatalytic degradation of Congo red was achieved by these samples within 130, 80, 40 and 30 mins of UV illumination.     

Synthesis of Bi2O3/TiO2 nanostructured films for photocatalytic applications

Dendritic growth of bismuth oxide nanostructured films was accomplished by reactive magnetron sputtering. The deposition of the Bi₂O₃ template layers was adapted to abide a vapour-liquid-solid mechanism in order to develop a 3D growth morphology with high surface area templates for photocatalytic applications. TiO₂ photocatalytic thin films were deposited at a later stage onto Bi₂O₃ layers. The obtained heterostructured films were characterized by scanning electron microscopy, X-ray diffraction and atomic force microscopy. Additionally, the photocatalytic efficiency was assessed by conducting an assay using methylene blue dye as testing pollutant under a UV-A illumination. The photocatalytic tests revealed that the Bi₂O₃ layers functionalized with TiO₂ thin films are more efficient at degrading the pollutant, by a factor of 6, when compared with the individual layered films.     

Photocatalytic activity of Cr-doped TiO2 nanoparticles deposited on porous multicrystalline silicon films

This work deals with the deposition of Cr-doped TiO₂ thin films on porous silicon (PS) prepared from electrochemical anodization of multicrystalline (mc-Si) Si wafers. The effect of Cr doping on the properties of the TiO₂-Cr/PS/Si samples has been investigated by means of X-ray diffraction (XRD), atomic force microcopy (AFM), photoluminescence, lifetime, and laser beam-induced current (LBIC) measurements. The photocatalytic activity is carried out on TiO₂-Cr/PS/Si samples. It was found that the TiO₂-Cr/PS/mc-Si type structure degrades an organic pollutant (amido black) under ultraviolet (UV) light. A noticeable degradation of the pollutant is obtained for a Cr doping of 2 at. %. This result is discussed in light of LBIC and photoluminescence measurements.     

Kinetic Analysis of Heterogeneous Photocatalysis: Role of Hydroxyl Radicals

This article provides the current research activities that concentrate on the role of hydroxyl radicals in heterogeneous photocatalysis by transition metal oxides for different nanostructures. We devote most attention to Al-based Fe₂O₃ nanostructures that have been synthesized using chemical methods. The visible light photocatalytic activity of nanocrystalline pure and Al-based Fe₂O₃ photocatalysts for degradation of Salicylic acid, 4-Cholorphenol, and Acid orange 7 (Azo dye) is reported. The catalytic activity and selectivity for organic species are remarkably influenced by the size of the different photocatalyst. Utilization of various structures, advanced oxidation processes, heterojunction between Al-based Fe₂O₃ and TiO₂, and application of solar energy for heterogeneous photocatalysis of water impurities were discussed. Extent of complete mineralization of such compounds by measuring COD and TOC was discussed. We conclude this review with personal perspectives on the directions towards which future research on this new class of nanostructured materials for photocatalysis might be directed.     

Enhancing Effects of Ultrasound Treatment on the Preparation of TiO2 Photocatalysts

TiO₂ nanoparticles were synthesized by the hydrolysis and condensation of TiCl₄ in a mixed solvent of iso-propyl alcohol and water with or without ultrasound treatment. As-prepared powders were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy filtering transmission electron microscopy (EF-TEM), particle size analysis and BET surface area analysis. The specific surface area, thermal stability and crystallization of the as-prepared samples treated with ultrasound were higher than those of samples treated without ultrasound. To examine the photocatalytic activity of the as-prepared TiO₂, the photodegradation of MB which is a typical dye resistant to biodegradation has been investigated on TiO₂ powders in aqueous heterogeneous suspensions. The photocatalytic degradation of a aqueous solution of methylene blue shows a remarkable increase when it is carried out with ultrasound in all cases.     

Synthesis,Characterization and Photocatalytic Activity of New Photocatalyst ZnBiSbO4 under Visible Light Irradiation

In this paper, ZnBiSbO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiSbO₄ had been characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, transmission electron microscope and UV-visible spectrometer. ZnBiSbO₄ crystallized with a pyrochlore-type structure and a tetragonal crystal system. The band gap of ZnBiSbO₄ was estimated to be 2.49 eV. The photocatalytic degradation of indigo carmine was realized under visible light irradiation with ZnBiSbO₄ as a catalyst compared with nitrogen-doped TiO₂ (N-TiO₂) and CdBiYO₄. The results showed that ZnBiSbO₄ owned higher photocatalytic activity compared with N-TiO₂ or CdBiYO₄ for the photocatalytic degradation of indigo carmine under visible light irradiation. The reduction of the total organic carbon, the formation of inorganic products, SO₄²⁻ and NO₃⁻, and the evolution of CO₂ revealed the continuous mineralization of indigo carmine during the photocatalytic process. One possible photocatalytic degradation pathway of indigo carmine was obtained. The phytotoxicity of the photocatalytic-treated indigo carmine (IC) wastewater was detected by examining its effect on seed germination and growth.     

Capability of coupled CdSe/TiO2 heterogeneous structure for photocatalytic degradation and photoconductivity

Highly ordered TiO₂ nanotube arrays (TiO₂-NTAs), with a uniform tube size on titanium substrate, were obtained by means of reoxidation and annealing. A composite structure, CdSe quantum dots@TiO₂ nanotube arrays (CdSe QDs@TiO₂-NTAs), was fabricated by assembling CdSe quantum dots into TiO₂-NTAs via cyclic voltammetry electrochemical deposition. The X-ray diffractometer (XRD), field-emission scanning electron microscope (SEM), and transmission electron microscope (TEM) were carried out for the determination of the composition and structure of the tubular layers. Optical properties were investigated by ultraviolet-visible spectrophotometer (UV-Vis). Photocurrent response under visible light illumination and photocatalytic activity of samples by degradation of methyl orange were measured. The results demonstrated that the photo absorption of the composite film shifted to the visible region, and the photocurrent intensity was greatly enhanced due to the assembly of CdSe QDs. Especially, photocurrent achieved a maximum of 1.853 μA/cm² after five voltammetry cycles of all samples. After irradiation under ultra violet-visible light for 2 h, the degradation rate of composition to methyl orange (MO) reached 88.20%, demonstrating that the CdSe QDs@TiO₂-NTAs exhibited higher photocatalytic activity.     

Facile synthesis and enhanced visible light photocatalytic activity of N and Zr co-doped TiO2 nanostructures from nanotubular titanic acid precursors

Zr/N co-doped TiO₂ nanostructures were successfully synthesized using nanotubular titanic acid (NTA) as precursors by a facile wet chemical route and subsequent calcination. These Zr/N-doped TiO₂ nanostructures made by NTA precursors show significantly enhanced visible light absorption and much higher photocatalytic performance than the Zr/N-doped P25 TiO₂ nanoparticles. Impacts of Zr/N co-doping on the morphologies, optical properties, and photocatalytic activities of the NTA precursor-based TiO₂ were thoroughly investigated. The origin of the enhanced visible light photocatalytic activity is discussed in detail.     

Photocatalytic degradation of methylene blue and acetaldehyde by TiO<Subscript>2</Subscript>/glaze coated porous red clay tile

Nanosized TiO₂ sol synthesized by sol-gel method was successfully coated on the porous red clay tile (PRC tile) with micrometer sized pores. PRC tile was first coated with a low-firing glaze (glaze-coated PRC tile) and then TiO₂ sol was coated on the glaze layer. A low-fired glaze was prepared at various blending ratios with frit and feldspar, and a blending ratio glazed at 700 °C was selected as an optimum condition. Then TiO₂ sol synthesized from TTIP was dip-coated on the glazed layer (TiO₂/glaze-coated PRC tile), and it was calcined again at 500 °C. Here, these optimum calcination temperatures were selected to derive a strong bonding by a partial sintering between TiO₂ sol particles and glaze layer. Photocatalytic activity on the TiO₂/glaze-coated PRC tile was evaluated by the extent of photocatalytic degradation of methylene blue and acetaldehyde. Methylene blue with the high concentration of 150 mg/l on the surface of TiO₂/glaze-coated PRC tile was almost photodegraded within 5 hours under the condition of average UV intensity of 0.275 mW/cm₂, while no photodegradation reaction of methylene blue occurred on the glaze-coated PRC tile without TiO₂. Another photocatalytic activity was also evaluated by measuring the extent of photocatalytic degradation of gaseous acetaldehyde. The photodegradation efficiency in TiO₂/glaze-coated PRC tile showed about 77% photocatalytic degradation of acetaldehyde from 45,480 mg/l to 10,536 mg/l after the UV irradiation of 14 hours, but only about 16% in the case of the glaze-coated PRC tile.     

Synthesis and Photocatalytic Activity of Anatase TiO2 Nanoparticles-coated Carbon Nanotubes

A simple and straightforward approach to prepare TiO₂-coated carbon nanotubes (CNTs) is presented. Anatase TiO₂ nanoparticles (NPs) with the average size ~8 nm were coated on CNTs from peroxo titanic acid (PTA) precursor even at low temperature of 100 °C. We demonstrate the effects of CNTs/TiO₂ molar ratio on the adsorption capability and photocatalytic efficiency under UV–visible irradiation. The samples showed not only good optical absorption in visible range, but also great adsorption capacity for methyl orange (MO) dye molecules. These properties facilitated the great enhancement of photocatalytic activity of TiO₂ NPs-coated CNTs photocatalysts. The TiO₂ NPs-coated CNTs exhibited 2.45 times higher photocatalytic activity for MO degradation than that of pure TiO₂.     

The dependence of the photocatalytic activity of TiO2/carbon nanotubes nanocomposites on the modification of the carbon nanotubes

Nanostructural TiO₂/modified multi-wall carbon nanotubes photocatalysts were prepared by hydrolysis of Ti(iso-OC₃H₇)₄ providing chemical bonding of anatase TiO₂ nanoparticles onto oxidized- or amino-functionalized multi-wall carbon nanotubes (MWCNT). The processes of functionalization of the MWCNT and the deposition of TiO₂ influence the photocatalytic activity of the synthesized nanocomposites. The phase composition, crystallite size, and the structural and surface properties of the obtained TiO₂/modified-MWCNT nanocomposite were analyzed from XRD, FEG-SEM, TEM/HRTEM and FTIR data, as well low temperature N₂ adsorption. In the photocatalytic study, the TiO₂/oxidized-MWCNT catalyst showed the highest and the TiO₂/amino functionalized-MWCNT catalysts somewhat lower degradation rates, indicating that the enhancement of photocatalysis was supported by the more effective electron transfer properties of the oxygen- than amino-containing functional groups, which support the efficient charge transportation and separation of the photogenerated electron-hole pairs.     

Photocatalytic functional coatings of TiO2 thin films on polymer substrate by plasma enhanced atomic layer deposition

We prepared photocatalytic TiO₂ thin films which exhibited relatively high growth rate and low impurity on polymer substrate by plasma enhanced atomic layer deposition (PE-ALD) from Ti(NMe₂)₄ [tetrakis (dimethylamido) Ti, TDMAT] and O₂ plasma to show the self-cleaning effect. The TiO₂ thin films with anatase phase and bandgap energy about 3.3 eV were deposited at growth temperature of 250 °C and the photocatalytic effects were compared with commercial Activ glass. From contact angles measurement of water droplet and photo-induced degradation test of organic liquid, TiO₂ thin films with anatase phases showed superhydrophilic phenomena and decomposed organic liquid after UV irradiation. The anatase TiO₂ thin film on polymer substrate showed highest photocatalytic efficiency after 5 h UV irradiation. We attribute the highest photocatalytic efficiency of TiO₂ thin film with anatase structure to the formation of suitable crystalline phase and large surface area.     

Preparation, Characterization and Photocatalytic Activity of TiO2 Formed from a Mesoporous Precursor

A mesoporous TiO₂ precursor has been prepared by the hydrothermal condensation of tetrabutyltitanate in presence of an alkylamine template by three different methods. The surfactants were removed from as-synthesized TiO₂ by calcination and solvent extraction methods. A potential photocatalyst, predominantly present as an anatase phase, was produced in the latter case. The samples were characterized by XRD, FT-IR, low-temperature N₂ adsorption-desorption measurement and solid state UV-visible diffuse reflectance spectroscopy. The photocatalytic activities of all TiO₂ samples were compared using the degradation of phenol as a probe reaction.     

The effects of growth conditions on the surface properties and photocatalytic activities of anatase TiO<Subscript>2</Subscript> films prepared via electrochemical anodizing and annealing methods

In the present work, nanostructured TiO₂ films were prepared by electrochemical anodization process of titanium in fluoride-containing electrolytes using an innovative approach. After anodization, the TiO₂ films were annealed at 480?°C for 2 h in air in order to acquire anatase phase transformation and increase its crystallinity. The effects of anodization voltage, electrolyte concentration and anodization time on the formation of TiO₂ films and the photocatalytic degradation of methylene blue (MB) were discussed in details. The phase structure and surface morphology of the samples characterized by means of X-ray diffraction and scanning electron microscope. The as-prepared nanostructured TiO₂ film anodized in 0.5% HF electrolyte at 15 V for 240 min showed excellent photocatalytic degradation of MB and is promising for environmental purification.