Preparation of gas standards for quality assurance of hydrogen fuel

This study has developed traceable standards for evaluating impurities in hydrogen fuel according to ISO 14687. Impurities in raw H₂, including sub μmol/mol levels of CO, CO₂, and CH₄, were analyzed using multiple detectors while avoiding contamination. The gravimetric standards prepared included mixtures of the following nominal concentrations: 1, 2, 3–5, 8–11, 17–23, and 47–65 μmol/mol for CO₂, CH₄ and CO, O₂, N₂, Ar, and He, respectively. The expanded uncertainty ranges were 0.8% for Ar, N₂, and He, 1% for CH₄ and CO, and 2% for CO₂ and O₂. These standards were stable, while that for CO varied by only 0.5% during a time span of three years. The prepared standards are useful for evaluating the compliance of H₂ fuel in service stations with ISO 14687 quality requirements.     

Reinforcement learning based energy management systems and hydrogen refuelling stations for fuel cell electric vehicles: An overview

This paper examines the current state of the art of hydrogen refuelling stations-based production and storage systems for fuel cell hybrid electric vehicles (FCHEV). Nowadays, the emissions are increasing rapidly due to the usage of fossil fuels and the demand for hydrogen refuelling stations (HRS) is emerging to replace the conventional vehicles with FCHEVs. Hence, the availability of HRS and its economic aspects are discussed. In addition, a comprehensive study is presented on the energy storage systems such as batteries, supercapacitors and fuel cells which play a major role in the FCHEVs. An energy management system (EMS) is essential to meet the load requirement with effective utilisation of power sources with various optimizing techniques. A detailed comparative analysis is presented on the merits of Reinforcement learning (RL) for the FCHEVs. The significant challenges are discussed in depth with potential solutions for future work.     

A comprehensive review on water management strategies and developments in anion exchange membrane fuel cells

In spite of significant achievements in alkaline exchange membrane fuel cells (AEMFCs) in recent years, they are still lagging behind proton exchange membrane fuel cells (PEMFCs) due to performance instability. Among the relevant operational parameters of AEMFC, the researchers have found that poor water management within the cell was the main reason for failure of the system. In the past five years, numerous modeling and experimental works were reported proposing different strategies to improve water management of AEMFC. With proper water management, the achievable power output in AEMFCs is comparable with that of PEMFCs or even more. Efforts have to be continued, but AEMFCs can become a strong competitor in the market place. This review paper discusses the strategies and developments impacting water management of AEMFCs providing knowledge source for upcoming studies.     

Biomass gasification coupled with producer gas cleaning,bottling and HTS catalyst treatment for H2-rich gas production

The aim of the present study is to demonstrate the production of hydrogen-rich fuel gas from J. curcas residue cake. A comprehensive experimental study for the production of hydrogen rich fuel gas from J. curcas residue cake via downdraft gasification followed by high temperature water gas shift catalytic treatment has been carried out. The gasification experiments are performed at different equivalence ratios and performance of the process is reported in terms of producer gas composition & its calorific value, gas production rate and cold gas efficiency. The producer gas is cleaned of tar and particulate matters by passing it through venturi scrubber followed by sand bed filter. The clean producer gas is then compressed at 0.6 MPa and bottled into a gas cylinder. The bottled producer gas and a simulated mixture of producer gas are then subjected to high temperature shift (HTS) catalytic treatment for hydrogen enriched gas production. The effect of three different operating parameters GHSV, steam to CO ratio and reactor temperature on the product gas composition and CO conversion is reported. From the experimental study it is found that, the presence of oxygen in the bottled producer gas has affected the catalyst activity. Moreover, higher concentration of oxygen concentration in the bottled producer gas leads to the instantaneous deactivation of the HTS catalyst.     

Economic viability assessment of sustainable hydrogen production,storage, and utilisation technologies integrated into on- and off-grid micro-grids: A performance comparison of different meta-heuristics

In recent years, there has been considerable interest in the development of zero-emissions, sustainable energy systems utilising the potential of hydrogen energy technologies. However, the improper long-term economic assessment of costs and consequences of such hydrogen-based renewable energy systems has hindered the transition to the so-called hydrogen economy in many cases. One of the main reasons for this is the inefficiency of the optimization techniques employed to estimate the whole-life costs of such systems. Owing to the highly nonlinear and non-convex nature of the life-cycle cost optimization problems of sustainable energy systems using hydrogen as an energy carrier, meta-heuristic optimization techniques must be utilised to solve them. To this end, using a specifically developed artificial intelligence-based micro-grid capacity planning method, this paper examines the performances of twenty meta-heuristics in solving the optimal design problems of three conceptualised hydrogen-based micro-grids, as test-case systems. Accordingly, the obtained numeric simulation results using MATLAB indicate that some of the newly introduced meta-heuristics can play a key role in facilitating the successful, cost-effective development and implementation of hydrogen supply chain models. Notably, the moth-flame optimization algorithm is found capable of reducing the life-cycle costs of micro-grids by up to 6.5% as compared to the dragonfly algorithm.     

Effect of manifold injection of hydrogen gas in producer gas and neem biodiesel fueled CRDI dual fuel engine

The high flammability of hydrogen gas gives it a steady flow without throttling in engines while operating. Such engines also include different induction/injection methods. Hydrogen fuels are encouraging fuel for applications of diesel engines in dual fuel mode operation. Engines operating with dual fuel can replace pilot injection of liquid fuel with gaseous fuels, significantly being eco-friendly. Lower particulate matter (PM) and nitrogen oxides (NO_x) emissions are the significant advantages of operating with dual fuel.Consequently, fuels used in the present work are renewable and can generate power for different applications. Hydrogen being gaseous fuel acts as an alternative and shows fascinating use along with diesel to operate the engines with lower emissions. Such engines can also be operated either by injection or induction on compression of gaseous fuels for combustion by initiating with the pilot amount of biodiesel. Present work highlights the experimental investigation conducted on dual fuel mode operation of diesel engine using Neem Oil Methyl Ester (NeOME) and producer gas with enriched hydrogen gas combination. Experiments were performed at four different manifold hydrogen gas injection timings of TDC, 5°aTDC, 10°aTDC and 15°aTDC and three injection durations of 30°CA, 60°CA, and 90°CA. Compared to baseline operation, improvement in engine performance was evaluated in combustion and its emission characteristics. Current experimental investigations revealed that the 10°aTDC hydrogen manifold injection with 60°CA injection duration showed better performance. The BTE of diesel + PG and NeOME + PG operation was found to be 28% and 23%, respectively, and the emissions level were reduced to 25.4%, 14.6%, 54.6%, and 26.8% for CO, HC, smoke, and NO_x, respectively.     

Cold-start icing characteristics of proton-exchange membrane fuel cells

Understanding the icing characteristics of proton-exchange membrane fuel cells (PEMFCs) is essential for optimizing their cold-start performance. This study examined the effects of start-up temperature, current density, and microporous layer (MPL) hydrophobicity on the cold-start performance and icing characteristics of PEMFCs. Further, the cold-start icing characteristics of PEMFCs were studied by testing the PEMFC output voltage, impedance, and temperature changes at different positions of the cathode gas diffusion layer. Observation of the MPL surface after cold-start failure allowed determination of the distribution of ice formation at the catalytic layer/MPL interface. At fuel cell temperatures below 0 °C, supercooled water in the cell was more likely to undergo concentrated instantaneous freezing at higher temperatures (−4 and −5 °C), whereas the cathode tended to freeze in sequence at lower temperatures (−8 °C). In addition, a more hydrophobic MPL resulted in two successive instantaneous icing phenomena in the fuel cell and improved the cold-start performance.     

Metaheuristic-based energy management strategies for fuel cell emergency power unit in electrical aircraft

This paper aims at presenting a comparative analysis of different metaheuristic algorithms in the application of energy management for fuel cell-based hybrid emergency power unit within electrical aircraft. Two energy management conventional strategies are employed while optimizing the operating temperature. Both the external energy maximization and the equivalent consumption minimization strategies are dealt with. The most efficient up-to-date metaheuristic techniques such as the artificial bee colony, the grey wolf optimization, the cuckoo search, the mine blast algorithm, the whale optimization algorithm, the moth swarm algorithm, the harmony search, the modified flower pollination algorithm and the electromagnetic field optimization are considered. The overall index of optimization performance is considered as a function of hydrogen consumption, overall system efficiency, variations of states of charge and stresses in different energy sources. The numerical simulations, through Matlab™/Simulink, highlights the capability of the different metaheuristic optimization techniques towards reducing the amount of consumed hydrogen in fuel cell-based emergency power unit in electrical aircrafts. The electromagnetic field optimization method results in significant hydrogen consumption reduction in comparison with the other proposed techniques.     

Numerical study of cold start performance of proton exchange membrane fuel cell with coolant circulation

It has been well recognized that cold start is one of the key issues of proton exchange membrane fuel cell (PEMFC) used as the engine of vehicles. Coolant circulation is usually launched synchronously with the fuel cell during cold start to avoid sudden large temperature variation, which greatly increases the cell thermal mass, lowers the heating rate, and worsens the cell performance. Considering the flow and heat transfer of coolant circulation, a three-dimensional, transient, multi-disciplinary model for cold start is built up. The numerical results agree reasonably well with experimental data, indicating that the model can be used for the investigation of PEMFC cold start processes. The analysis of circulation parameter effects shows that increasing the coolant flow rate or coolant tank capacity has little influence on the cell voltage, but will increase the non-uniformity of temperature distribution along flow direction. At lower start-up temperature, this non-uniformity is more obvious. With higher coolant flow rate, although the distribution of current density becomes more evenly, the ice formation amount increases and its distribution and location are greatly affected.     

Refueling-station costs for metal hydride storage tanks on board hydrogen fuel cell vehicles

Refueling costs account for much of the fuel cost for light-duty hydrogen fuel-cell electric vehicles. We estimate cost savings for hydrogen dispensing if metal hydride (MH) storage tanks are used on board instead of 700-bar tanks. We consider a low-temperature, low-enthalpy scenario and a high-temperature, high-enthalpy scenario to bracket the design space. The refueling costs are insensitive to most uncertainties. Uncertainties associated with the cooling duty, coolant pump pressure, heat exchanger (HX) fan, and HX operating time have little effect on cost. The largest sensitivities are to tank pressure and station labor. The cost of a full-service attendant, if the refueling interconnect were to prevent self-service, is the single largest cost uncertainty. MH scenarios achieve $0.71–$0.75/kg-H₂ savings by reducing compressor costs without incurring the cryogenics costs associated with cold-storage alternatives. Practical refueling station considerations are likely to affect the choice of the MH and tank design.     

Graphite nanopowder functionalized 3-D acrylamide polymeric anode for enhanced performance of microbial fuel cell

3-D highly conductive polyvinyl formaldehyde sponges functionalized with acrylamide are fabricated using polyvinyl alcohol with varying concentrations of graphite nanopowder. The properties of the fabricated anodes are analyzed and its application in microbial fuel cells is evaluated. A comparative study with Graphite felt is also performed to evaluate its commercial viability. The presence of Hydroxyl and Amine functional groups enhanced the hydrophilic and biocompatible nature of the synthesized anodes. The phylogenetic analysis substantiated the biocompatible nature and mercury porosimetry showed macroporous nature of the fabricated anode. The highest power density of ~8 W/m² is recorded for C10 establishing solid biofilm formation. A ~94% COD removal revealed the versatility of the anode for MFC based wastewater treatment. The MFC performance was twice than that of control and was also highest among the most reported modified 3-D anodes. The durability study displayed the commercial opportunity of the anode for real-time MFC operation.     

Reducing the fuel consumption and emissions with the use of an external fuel cell hybrid power unit for electric taxiing at airports

Airport ground operations have a great impact on the environment. Various innovative solutions have been proposed for aircraft to perform taxi movements by deactivating their main engines. Although these solutions are environmentally beneficial, onboard and external electric taxiing solutions that are actively used and planned to be used in airports are not completely carbon-free. The disadvantages of the existing solutions can be alleviated by using an external fuel cell hybrid power unit to meet the energy required for taxiing that does not put additional weight on the aircraft. To reveal the power and energy required by the system, Airbus A320-200, which is a narrow-body aircraft and frequently used in airports, has been considered in this study. To determine the physical requirements of the aircraft for taxiing, a total of 900 s taxi-out movement consisting of four different periods with different runway slope, headwind, and maximum speeds were examined. According to the determined physical requirements, the conceptual design of the proposed fuel cell battery system was created and the physical data of the system for each period were obtained using the Matlab Simulink environment. As a result of the simulation, it is seen that the system consumes approximately 1.96 g of hydrogen per second. In addition, it has been calculated that 578.34 kg of CO₂ is emitted during the taxi-out movement. The results also show that as a result of using the proposed system, approximately 14.6 million tons of CO₂ emission per year can be prevented.     

Expected impacts on greenhouse gas and air pollutant emissions due to a possible transition towards a hydrogen economy in German road transport

Transitioning German road transport partially to hydrogen energy is among the possibilities being discussed to help meet national climate targets. This study investigates impacts of a hypothetical, complete transition from conventionally-fueled to hydrogen-powered German transport through representative scenarios. Our results show that German emissions change between ?179 and +95 MtCO₂eq annually, depending on the scenario, with renewable-powered electrolysis leading to the greatest emissions reduction, while electrolysis using the fossil-intense current electricity mix leads to the greatest increase. German energy emissions of regulated pollutants decrease significantly, indicating the potential for simultaneous air quality improvements. Vehicular hydrogen demand is 1000 PJ annually, requiring 446–525 TWh for electrolysis, hydrogen transport and storage, which could be supplied by future German renewable generation, supporting the potential for CO₂-free hydrogen traffic and increased energy security. Thus hydrogen-powered transport could contribute significantly to climate and air quality goals, warranting further research and political discussion about this possibility.     

Analysis of air conditioning system impact on a fuel cell vehicle performance based on a realistic model under actual urban conditions

In this study, a practical fuel cell vehicle considering the Heating, Ventilation, and Air conditioning system is considered to analyze hydrogen consumption under different working conditions. As a prevalent hydrogen-fueled vehicle, Toyota Mirai has been meticulously modeled in Simecenter Amesim software. The simulated model covers all of the vehicle's components with a concentration on Heating, Ventilation, and Air conditioning system. Since the air temperature and ‘weather conditions can significantly impact the vehicle's overall performance, various environmental conditions, including temperature variations, humidity, and varied solar fluxes, are taken into account. Furthermore, New York City is chosen as a densely populated megacity to simulate the dynamic behavior of the fuel cell vehicle under actual driving circumstances. The results illustrate that the Heating, Ventilation, and Air conditioning system can notably alter hydrogen consumption under real driving conditions. In this regard, turning on the Heating, Ventilation, and Air Conditioning system results in a 19% increase in fuel consumption. Moreover, the degradation phenomenon, which is a typical result of using fuel cell vehicles under urban driving conditions, impacts the vehicle's mileage and hydrogen consumption. The simulation results indicate that a fresh fuel cell stack consumes 80 g of hydrogen, while for 2500 and 5500 working hours fuel cells, the stack consumes 89.6 and 107 g of hydrogen, respectively. Based on the obtained results, a 33.75% increase in fuel consumption occurs by implementing a degraded fuel cell stack under real driving conditions.     

Exergetic analysis of hydrogen utilisation pathways – Part 1: Energy supply in buildings

This article analyses exergy losses along hydrogen utilisation pathways recently discussed in Germany and other countries. As a renewable fuel hydrogen will be an important part of sustainable future economies. Hydrogen can be used in all sectors, especially in buildings, for mobility and in industry, e.g. in steel production or ammonia synthesis. However, hydrogen has to be produced in a sustainable way. The most promising production is via water electrolysis using renewable electricity. In the first part of this work, exergy analysis is made for the complete hydrogen pathways from production until final utilisation for energy supply in buildings. The second part will focus on pathways for mobility. In the third part, the results are compared with available alternatives to hydrogen such as direct use of electricity in building supply or mobility. The results for building energy supply show that firstly transportation in pipelines (mixture with natural gas and pure hydrogen) is very efficient. Secondly, major exergy losses are caused by the electrolyser. Thirdly, combustion of renewable hydrogen for room heating in common boilers cause the highest exergy losses, but the use of combined heat and power (CHP) units or fuel cells can improve the exergy efficiency substantially.     

Proton-exchange membrane fuel cell ionomer hydration model using finite volume method

In this paper a dynamic membrane electrode assembly water transport model, based on the Finite Volume Method, is presented. The purpose of this paper is to provide an accessible and reproductible model capable of real time simulation. To this aim, a detailed explanation is provided regarding the equations and methods used to compute the physical-based fuel cell model. Additionally, the model is purposely developed using basic code (on Matlab?), to not be limited to a single programming language. Two phase water transport through multi-gaseous porous media (electrodes), interfacial transport, as well as diffusion, convection, and electro-osmosis within the polymer are considered. The main novelty relies in the restructuring of all equations into a single implicit system, which can iteratively be resolved through LU decomposition. This computationally efficient method allows the model to be capable of real-time simulation, by displaying the membrane water content profile evolution on a 3D figure. For nominal PEMFC operating conditions, a dry membrane reaches 35% of its final water concentration value after 2 s, and fully converges after 20 s. The final water content profile displays an 18% gradient (9 and 11 molecules per sulfonic acid sites on the anode and cathode sides, respectively). To calibrate and validate this model, mass transfer (flowmeter) and electrical (ohmmeter) methods have been applied.     

Optimization of the bipolar plate rib structure in proton exchange membrane fuel cells with an analytical method

In order to make proton exchange membrane fuel cell vehicles more marketable, not only should costs be reduced, but service life should also be further increased. Important factors determining the expected service life are the deformation and the stress distribution within the carbon paper gas diffusion layer (GDL), on which the rib structure of the bipolar plates (BPP) has a significant impact. Against this background, a new analytical method is firstly developed to predict the deformation and stress distribution within the GDL, due to compression by the ribs, with high accuracy and low computing resources. Based on the analytical method, a new parabolic rib geometry is then proposed, which can significantly reduce the maximum normal and shear stresses occurring within the GDL, thus reducing the possibility of its mechanical damage. The optimized rib design provides guidance for designing and processing commercial fuel cell BPPs.     

Energy efficient hydrogen drying and purification for fuel cell vehicles

High-purity standards are required for hydrogen used in fuel cell vehicles. The relative abundance of contaminants is highly influenced by the production pathway. Hydrogen obtained from water electrolysis presents three main pollutants: Nitrogen, Oxygen and Water. Herein, the engineering and implementation of removal techniques in a commercial 50 kW alkaline electrolyzer are reported. The full system was characterized with various analytical techniques including gas chromatography and mass spectrometry. A reduction of contaminant levels compatible with ISO 14687:2019 standard was achieved. From cold start, 100 min of operation are required to reach the desired nitrogen levels. Oxygen was removed in one step with a catalytic converter. Drying of hydrogen was achieved by using an innovative vacuum assisted pressure swing adsorption system. Sub-ppm levels of water are obtained with a power consumption of only 0.5 kWh/kg H₂ and 98.4% of product recovery.     

Effect of ZrO2 on the performance of Co–CeO2 catalysts for hydrogen production from waste-derived synthesis gas using high-temperature water gas shift reaction

In this study, highly active and stable CeO₂, ZrO₂, and Zr_(1-x)Ce_(x)O₂-supported Co catalysts were prepared using the co-precipitation method for the high-temperature water gas shift reaction to produce hydrogen from waste-derived synthesis gas. The physicochemical properties of the catalysts were investigated by carrying out Brunauer-Emmet-Teller, X-ray diffraction, CO-chemisorption, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and H₂-temperature-programmed reduction measurements. With an increase in the ZrO₂ content, the surface area and reducibility of the catalysts increased, while the interaction between Co and the support and the dispersion of Co deteriorated. The Co–Zr_0.4Ce_0·6O₂ and Co–Zr_0.6Ce_0·4O₂ catalysts showed higher oxygen storage capacity than that of the others because of the distortion of the CeO₂ structure due to the substitution of Ce⁴⁺ by Zr⁴⁺. The Co–Zr_0.6Ce_0·4O₂ catalyst with high reducibility and oxygen storage capacity exhibited the best catalytic performance and stability among all the catalysts investigated in this study.