Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Comparative study on the excretion of vitexin‐4′′‐O‐glucoside in mice after oral and intravenous administration by using HPLC

The aim of the present study was to characterize the excretion of pure vitexin‐4”‐O‐glucoside (VOG) in mice following oral and intravenous administration at a dose of 30 mg/kg. A sensitive and specific HPLC method with hespridin as internal standard, a Diamonsil C₁₈ column protected with a KR C₁₈ guard column and a mixture consisting of methanol–acetonitrile–tetrahydrofuran–0.1% glacial acetic acid (6:2:18:74, v/v/v/v) as mobile phase was developed and validated for quantitative analysis in biological samples. VOG could be excreted as prototype in excreta including urine and feces after both routes of administration, and the cumulative excretion of VOG was 24.31 ± 11.10% (17.97 ± 5.59% in urinary excretion; 6.34 ± 5.51% in fecal excretion) following oral dosing and 5.66 ± 3.94% (4.78 ± 3.13% in urinary excretion; 0.88 ± 0.81% in fecal excretion) following intravenous dosing. The results showed that the elimination of VOG after the two routes was fairly low, which meant that VOG was metabolized as other forms and the elimination after oral dosing was almost 4.3‐fold that after intravenous dosing. For both routes of administration, VOG excreted as prototype in urine was much more than that in feces, nearly 2.83‐fold for oral administration and 5.43‐fold for intravenous administration, which should be attributed to enterohepatic circulation. Taken together, renal excretion was the dominant path of elimination of VOG for oral and intravenous administration in mice and biliary excretion contributed less. Copyright © 2013 John Wiley & Sons, Ltd.     

Fabrication of poly(2‐oxy‐6‐naphthoyl) particles by direct polycondensation of 2‐hydroxy‐6‐naphthoic acid

Morphology control of poly(2‐oxy‐6‐naphthoyl) (PON) was examined by using reaction‐induced crystallization of oligomers during direct polycondensation of 2‐hydroxy‐6‐naphthoic acid with p‐toluenesulfonyl chloride and N,N‐dimethylformamide in pyridine. PON particles were obtained of which the diameter was in the range of 8.0–8.3 µm. The particles were comprised of many lamellae and exhibited spherulitic morphology. They possessed high crystallinity evaluated from wide‐angle X‐ray scattering (WAXS). Formation mechanism of the particles was clarified from the results of morphology observation, yield, density and WAXS. When the number average degree of polymerization of the oligomers exceeded a critical value of ca. 4–5, they were precipitated to form lamellae. The lamellae grew to spherulites through screw dislocation with continuous precipitation of the oligomer from the solution. Finally, further polymerization occurred gradually in the precipitates. Copyright © 2005 John Wiley & Sons, Ltd.     

Determination of tacrine‐6‐ferulic acid in rat plasma by LC‐MS/MS and its application to pharmacokinetics study

Tacrine, as a drug for treating Alzheimer's disease (AD), has low efficacy owing to its single function and serious side effects. However, tacrine‐6‐ferulic acid (T6FA), the dimer which added ferulic acid to tacrine, has been found to be a promising multifunctional drug candidate for AD and much more potent and selective on acetylcholinesterase (AChE) than tacrine. The aim of the present work was to develop and validate an LC‐MS/MS method with electrospray ionization for the quantification of T6FA in rat plasma using tacrine‐3‐ferulic acid (T3FA) as internal standard and to examine its application for pharmacokinetic study in rats. Following a single liquid–liquid extraction with ethyl acetate, chromatographic separation was achieved at 25 °C on a BDS Hypersil C₁₈ column with a mobile phase composed of 1% formic acid and methonal (30:70, v/v) at a flow rate of 0.2 mL/min. Quantification was achieved by monitoring the selected ions at m/z 474.2 → 298.1 for T6FA and m/z 432.2 → 199.0 for T3FA. The method was validated to be rapid, specific, accurate and precise over the concentration range of 0.5–1000.0 ng/mL in rat samples. Furthermore, it was successfully applied for the pharmacokinetic measurement of T6FA with an oral administration at 40 mg/kg to rats. Copyright © 2014 John Wiley & Sons, Ltd.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Photohydrodimerization of 6‐Methoxyflavone to 6,6″‐Dimethoxy‐2,2″‐Biflavanones

6‐Methoxyflavone ( 7 ) easily afforded two hydrodimers of rac‐6,6Prime;‐dimethoxy‐2,2″‐biflavanone ( 8a ) and meso‐6,6″‐dimethoxy‐2,2″‐biflavanone ( 8b ) and one reductive product of 6‐methoxyflavanone ( 9 ) by using photolysis with the electron‐donating amines including triethylamine, 2‐(N,N‐dimethylamino)ethanol or N,N‐dimethylaniline in solvents of acetonitrile, benzene or methylene dichloride. They were found to give higher yields of rac‐6,6″‐dimethoxy‐2,2″‐biflavanone ( 8a ) and meso‐6,6″‐dimethoxy‐2,2″‐biflavanone ( 8b ) (38.7% and 4.5%, 35.3% and 6.2%, respectively) in the reaction conditions of 1/10 molar ratio of 6‐methoxy‐flavone ( 7 ) to triethylamine in a solvent of acetonitrile with irradiation of twenty‐four hours by using 306 nm and 352 nm lamps.     

Pharmacokinetics of luteolin and tetra‐acetyl‐luteolin assayed by HPLC in rats after oral administration

Accurate and reproducible HPLC methods were developed and validated for the determination of concentrations of luteolin (LT) and tetra‐acetyl‐luteolin (TALT) in rat plasma. HPLC analyses were performed on an Agilent TC‐C₁₈ column protected by a guard Agilent Zorbax Eclipse Plus. The mobile phase for LT was a binary mixture of acetonitrile–water (40:60, v/v) containing 0.5% phosphoric acid at a flow rate of 1.0 mL/min, and that for TALT was a binary mixture of methanol–water (70 : 30, v/v) containing 0.5% glacial acetic acid at the same flow rate. The UV detection wavelength for both analytes was set at 350 nm. The calibration curve was linear over the range of 40–1800 ng/mL, the lower limit of quantitation was 40 ng/mL and the lower limit of detection was 20 ng/mL for both LT and TALT. The intra‐ and inter‐day precision (RSD) values for all samples were within 7.9%. The concentration–time curves of LT and TALT after oral administration (30 mg/kg) were both fitted to a two‐compartment model. The pharmacokinetic characteristics of TALT were better than that of LT in the maximum plasma concentration (C_max) and the area under the concentration–time curve (AUC). Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Cytotoxicity of 6‐Pyrrolidinyl‐2‐(2‐Substituted Phenyl)‐4‐Quinazolinones

In our continuing search for potential anticancer candidates, 2‐(3‐methoxyphenyl)‐6‐pyrrolidinyl‐4‐quinazolinone ( JJC‐1 ) was selected as the lead compound. Starting 5‐pyrrolidinyl‐2‐aminobenzamide was prepared using standard methodology from 5‐chloro‐2‐nitrobenzoic acid by reaction with SOCl₂, NH₃, pyrrolidine, and H₂. The starting benzamide then was reacted with 2‐substituted benzaldehyde or benzoyl chloride in N,N‐dimethylacetamide (DMAC) in the presence of NaHSO₃ at 150 °C. Thermal cyclodehydration/dehydrogenation gave the target 6‐pyrrolidinyl‐2‐(2‐substituted phenyl)‐4‐quinazolinones ( 15–22 ). These target compounds were assayed for their cytotoxicity in vitro against six cancer cell lines, including human monocytic leukemia cells (U937), mouse monocytic leukemia cells (WEHI‐3), human hepatoma cells (HepG2, Hep3B) and human lung carcinoma cells (A549, CH27). Most of them exhibited significant cytotoxic effect toward U937 and WEHI‐3 cells, with EC₅₀ values ranging from 0.30 to 10.10 μM. Compound 19 was investigated further for its action mechanisms. Preliminary findings indicated that compound 19 induced G2/M arrest and apoptosis on U937 cells.     

6‐Propyl‐2‐thiouracil versus 6‐methoxymethyl‐2‐thiouracil: enhancing the hydrogen‐bonded synthon motif by replacement of a methylene group with an O atom

The understanding of intermolecular interactions is a key objective of crystal engineering in order to exploit the derived knowledge for the rational design of new molecular solids with tailored physical and chemical properties. The tools and theories of crystal engineering are indispensable for the rational design of (pharmaceutical) cocrystals. The results of cocrystallization experiments of the antithyroid drug 6‐propyl‐2‐thiouracil (PTU) with 2,4‐diaminopyrimidine (DAPY), and of 6‐methoxymethyl‐2‐thiouracil (MOMTU) with DAPY and 2,4,6‐triaminopyrimidine (TAPY), respectively, are reported. PTU and MOMTU show a high structural similarity and differ only in the replacement of a methylene group (–CH₂–) with an O atom in the side chain, thus introducing an additional hydrogen‐bond acceptor in MOMTU. Both molecules contain an ADA hydrogen‐bonding site (A = acceptor and D = donor), while the coformers DAPY and TAPY both show complementary DAD sites and therefore should be capable of forming a mixed ADA/DAD synthon with each other, i.e. N—H…O, N—H…N and N—H…S hydrogen bonds. The experiments yielded one solvated cocrystal salt of PTU with DAPY, four different solvates of MOMTU, one ionic cocrystal of MOMTU with DAPY and one cocrystal salt of MOMTU with TAPY, namely 2,4‐diaminopyrimidinium 6‐propyl‐2‐thiouracilate–2,4‐diaminopyrimidine–N,N‐dimethylacetamide–water (1/1/1/1) (the systematic name for 6‐propyl‐2‐thiouracilate is 6‐oxo‐4‐propyl‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₇H₉N₂OS⁻·C₄H₆N₄·C₄H₉NO·H₂O, (I), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylformamide (1/1), C₆H₈N₂O₂S·C₃H₇NO, (II), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylacetamide (1/1), C₆H₈N₂O₂S·C₄H₉NO, (III), 6‐methoxymethyl‐2‐thiouracil–dimethyl sulfoxide (1/1), C₆H₈N₂O₂S·C₂H₆OS, (IV), 6‐methoxymethyl‐2‐thiouracil–1‐methylpyrrolidin‐2‐one (1/1), C₆H₈N₂O₂S·C₅H₉NO, (V), 2,4‐diaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate (the systematic name for 6‐methoxymethyl‐2‐thiouracilate is 4‐methoxymethyl‐6‐oxo‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₆H₇N₂O₂S⁻, (VI), and 2,4,6‐triaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate–6‐methoxymethyl‐2‐thiouracil (1/1), C₄H₈N₅⁺·C₆H₇N₂O₂S⁻·C₆H₈N₂O₂S, (VII). Whereas in (I) only an AA/DD hydrogen‐bonding interaction was formed, the structures of (VI) and (VII) both display the desired ADA/DAD synthon. Conformational studies on the side chains of PTU and MOMTU also revealed a significant deviation for cocrystals (VI) and (VII), leading to the desired enhancement of the hydrogen‐bond pattern within the crystal.     

LR12‐peptide quantitation in whole blood by RP‐HPLC and intrinsic fluorescence detection: Validation and pharmacokinetic study

A simple, sensitive, selective and robust HPLC method based on intrinsic fluorescence detection was developed for the quantitation of a dodecapeptide (designated as LR12), inhibitor of Triggering Receptor Expressed on Myeloid cells‐1, in rat whole blood. Sample treatment was optimized using protein precipitation and solid‐phase extraction. Chromatographic separation was carried out in a gradient mode using a core–shell C₁₈ column (150 × 4.6 mm, 3.6 μm) with mobile phases of acetonitrile and water containing trifluoroacetic acid at 1.0 mL/min. The method was validated using methodology described by the US Food and Drug Administration guidelines for bioanalytical methods. Linearity was demonstrated within the 50–500 ng/mL range and the lower limit of quantitation was 50 ng/mL. Finally, a preliminary pharmacokinetic study after intraperitoneal injection of LR12 in rats was conducted to evaluate both LR12 monomer and its corresponding disulfide dimer, the main product of degradation. Beyond the fact that this paper describes the first fully validated method for LR12 analysis in blood samples, the approach followed here to optimize pre‐analytical steps could be beneficial to develop HPLC and/or MS methods for other pharmaceutical peptides.     

An Oxidative Rearrangement of 6‐Phenylbicyclo[3.2.0]heptan‐6‐ol to 1,1′‐Biphenyl‐Carbaldehydes: A Mechanistic Study

Acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]heptan‐6‐ol gave 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes in small amounts as well as the expected rearrangement products. A detailed study of the reaction mechanism revealed that the conversion occurs via an oxidative process through the consecutive formation of cycloheptadienes, cycloheptatrienes, and 1,1′‐biphenyls. The acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]hept‐2‐en‐6‐ols gave 1‐ and 2‐phenylcycloheptatrienes directly, from which 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes were obtained by oxidation.     

Synthesis and Cytotoxicity of 1,4‐Dihydropyridines and an Unexpected 1,3‐Oxazin‐6‐one

Eight heterocycles have been prepared in a one‐pot reaction manner based on the Hantzsch dihydropyridine synthesis. The synthesis afforded seven dihydropyridines (DHP) and one unexpected 1,3‐oxazin‐6‐one. Their structures were confirmed based on NMR spectroscopy and mass spectrometry. The obtained products have been evaluated for their cytotoxicity against eight cancer cell lines and one normal cell line. Two halogenated DHPs ( 7 and 8 ) displayed cytotoxicity toward all the nine tested cancer cell lines with IC₅₀ values from 4.10 to 58.90 μm, while others showed selective activities. DHPs ( 7 and 8 ) bearing a Me group at C(2) and C(6) as well as a halogenated substituent at C(4′) were more antiproliferative than the others.     

Lipophilicity determination of N-( benzothiazol-2-yl )-α-amino alkyl phosphonic diesters by RP-HPLC and RP-HPTLC

Using methanol-water mixtures as the mobile phase,the chro-matographic retention parameters k' and Rf were determined by reversed-phase high-performance liquid chromatography(RP-HPLC)and reversed-phase high-performance thin-layer chromatography(RP-HPTLC)for N-(benzothiazol-2-yl)-o) amino alkyl phosphonic diesters and the correlation with lipophilicity parameter(ClogP)was established.Logkw values obtained from RP-HPLC and R values obtained from RP-HPTLC can be used to evaluate the lipophilicity of this kind of compounds.Chromatographic method is a good alternative for lipophilicity measurement.     

Novel asymmetric total synthesis of (+)‐6‐epicastanospermine

An asymmetric total synthesis of (+)‐6‐epicastanospermine was achieved in 13 steps and 19% overall yield from β‐hydroxy‐α‐furfurylamine derivative, which was prepared by Sharpless asymmetric aminohydroxylation of furyl acrylate.     

Analysis of free amino acids in Amur sturgeon by ultra‐performance liquid chromatography using pre‐column derivatization with 6‐aminoquinolyl‐carbamyl

A rapid, sensitive, and reliable ultra‐performance liquid chromatography (UPLC) coupled with photodiode array detection method was developed for the amino acid analysis of Amur sturgeon (Acipenser schrenckii Brandt). The method uses minimal sample volume and automated online precolumn derivitization of amino acids with fluorescent 6‐aminoquinolyl‐carbamyl reagent. The chromatographic separation was achieved by UPLC, which used a column with 1.7 μm particle packing that enabled higher speed of analysis, peak capacity, greater resolution, and increased sensitivity. Amino acid derivatives obtained under optimal conditions were separated on a Waters UPLC BEH C₁₈ column with Acetonitrile–acetate buffer as mobile phase. Matrix effects were investigated and good linearities with correlation coefficients better than 0.9949 were obtained over a wide range of 5–1000 μmol/L for all amino acids. The simple sample preparation and minimal sample volume make the method useful for the quantitation of 17 amino acids in Amur sturgeon samples. It is concluded that a rapid and robust platform based on UPLC was established, and a total of 17 amino acids of Amur sturgeon were tentatively detected. This method showed good accuracy and repeatability that can be used for the quantification of amino acids in real samples.     

Synthesis ofN1‐3‐{(4‐Substituted aryl‐3‐chloro‐2‐oxo‐azetidine)‐iminocarbamyl}‐propyl‐6‐nitroindazole Derivatives and Their Biological Significance

Synthesis ofN¹‐3‐{(4‐substitute daryl‐3‐chloro‐2‐oxo‐azetidine)‐iminocarbamyl}‐propyl‐6‐nitroindazole 4a – 4s was conducted by a conventional method. All the compounds were synthesized and characterized by IR, ¹H NMR, ¹³C NMR, FAB‐Mass techniques and chemical methods. All the final synthesized compounds were evaluated for their antimicrobial activity and antitubercular activity with MIC values against some selected microorganisms.     

Stereoselective Total Synthesis of Iso‐Cladospolide B and the 12 Membered‐Macrolactone (6S,12R)‐6‐Hydroxy‐12‐methyloxacyclododecane‐2,5‐dione

Total syntheses of iso‐cladospolide B ( 1 ) and the 12‐membered macrolactone (6S,12R)‐6‐hydroxy‐12‐methyloxacyclododecane‐2,5‐dione ( 2 ), a non‐natural product, were achieved from a common intermediate starting from commercially available 1,9‐nonane diol.     

ECEC and ECE‐Type Mechanisms in Electrochemical Oxidation of 4‐Substituted Catechols in the Presence of 4‐Hydroxy‐6‐methyl‐2‐pyrone

Electrochemical oxidation of 3,4‐dihydroxybenzoic acid ( 1 ) and 4‐tert‐butylcatechol ( 5 ) in the presence of 4‐hydroxy‐6‐methyl‐2‐pyrone ( 2 ) as nucleophile in aqueous solution has been studied using cyclic voltammetry and controlled‐potential coulometry. The results indicate that 1 via Michael reaction under electro‐decarboxylation reaction converts to heterocyclic compound 4 , and the quinone derived from 4‐tert‐butylcatechol ( 5 ) participates in Michael reaction with 2 and through an ECE mechanism converts to the corresponding o‐quinone ( 6a ). The electrochemical synthesis of 4 and 6a has been successfully performed in an undivided cell.