n-十二烷基-β-D-麦芽糖苷与十二烷基三甲基 氯化铵混合胶束的1H NMR研究

利用NMR技术的自扩散、自旋-自旋弛豫时间(T2)和自旋-晶格弛豫时间(T1)以及二维NOESY谱, 研究了n-十二烷基-β-D-麦芽糖苷(DM)与十二烷基三甲基氯化铵(DTAC)的二元混合体系中混合胶束的形成、大小变化、排列方式、复配比例和相互作用点等. NMR的自扩散系数表明了混合胶束的大小主要取决于DM分子, T2/T1显示混合胶束堆积的较紧密, 两分子的疏水链是以肩并肩的方式位于胶束核中, 2D NOESY 谱表明DTAC分子中与极头相连的亚甲基邻近DM分子中倒数第二个糖环, 产生分子间相互作用, 其相互作用和分子间距的大小随DM/DTAC比例的不同而变化, DM/DTAC在1∶4和1∶8之间是较好的复配比例范围, 并确定混合前后出现的变化T2值是混合胶束中产生相互作用的证椐.     

β-环糊精对聚氧乙烯十二烷基醚的双模式包结作用

通过表面张力法、浊点法、硫氰酸钴铵显色法和¹H NMR研究了β-环糊精(β-CD)对聚氧乙烯十二烷基醚(PL)的包结作用. 结果表明, β-CD可与PL形成2∶1和3∶1型两种超分子包结物, 表现出不同的物理化学性质. PL的疏水性烷基链被包络进β-CD空腔中, 形成了2∶1的超分子包结物;PL的亲水性聚氧乙烯基链被包络进β-CD空腔中, 形成了3∶1的超分子包结物. 结合实验结果, 通过比较β-CD和PL分子的大小, 提出了β-CD对PL分子两种可能的包结模式.     

二茂铁接枝聚丙烯酰胺水溶液的流变行为研究

采用“Post-Modification”技术在二甲基亚砜中直接对聚丙烯酰胺进行烷基化反应,接枝二茂铁官能团(Fc),制备出一种具有氧化还原性质的二茂铁改性聚丙烯酰胺(PAM-Fc).通过红外光谱(FTIR)、核磁氢谱(1H-NMR)、热失重(TGA)、电化学、动态流变测试等方法对PAM-Fc的化学结构、电化学活性和流变特性进行了表征.研究结果表明,PAM-Fc具有氧化还原性,相比PAM呈现更好的热稳定性,这主要源于Fc基团稳定了PAM分子链的自由基.Fc基团在水溶液中的疏水缔合作用会导致体系黏度显著增大.通过添加NaCl、β-环糊精或H2O2等可以对PAM-Fc水溶液的黏度进行有效调控.其中,NaCl可以屏蔽PAM-Fc分子链上的电荷,β-环糊精能够包合Fc基团,H2O2则可将疏水的还原态Fc基团氧化成亲水的氧化态Fc,从而实现PAM-Fc水溶液流变行为的调节.     

交联型聚芳醚砜两亲嵌段聚合物的合成与表征

首先分别合成了主链上含有查尔酮结构的疏水段和侧链上含有叔胺的亲水段,然后通过疏水段与亲水段的末端缩合反应合成了一系列光敏性聚芳醚砜两亲嵌段聚合物,其结构和热性能分别通过1 H NMR,FT-IR,UV-Vis光谱,TGA和万能力学试验机等进行表征测试.该两亲性嵌段聚合物具有良好的溶解性、热稳性、力学性能和光敏性,在紫外光谱322nm处有最大吸收峰,在常温下经紫外光照射,分子链之间发生[2+2]环加成反应,聚合物分子之间形成交联结构,最大交联度可达到64%.     

DSB显著提高羧酸盐驱油体系抗钙镁离子能力的研究

测定了工业品级的天然混合长链烷基羧酸盐(SDC)以及与3-(N,N-二甲基十二烷基胺)-2-羟基-丙磺酸(DSB)复配驱油体系的界面张力(ITFmin), 分别得出其抗钙镁离子的能力为400和5000 mg/L. 选择试剂级十二烷基羧酸钠与DSB复配, 测定了不同配比溶液的表面张力值和临界胶束浓度cmc, 结合长链烷基脂肪酸与钙离子的溶度积Ksp, 分析了对不溶性长链烷基羧酸盐形成的影响. 根据现场驱油体系配方, 计算了两者在溶液中的摩尔配比为4:1时的十二烷基羧酸盐在胶束中的摩尔分数xm1为0.51, 相互作用参数βm值为-3.11, 反映了两者有较强的相互作用. 采用量子化学方法, 对由1个十二烷基羧酸分子、1个DSB分子及1个二价钙离子组成的模型复合物进行了能量计算和电荷分布计算, 得出在长链烷基羧酸盐和DSB两者混合胶束的界面层中存在负电荷空穴, 提出二价金属离子被络合的模型, 合理地解释了实验事实.     

1-(2-羟乙基)-2-烷基-咪唑啉缓蚀剂缓蚀机理的理论研究

采用量子化学计算、分子动力学模拟和分子力学相结合的方法, 对6种不同烷基链长的1-(2-羟乙基)-2-烷基-咪唑啉缓蚀剂抑制H2S腐蚀的缓蚀机理进行研究, 并对其缓蚀性能进行评价. 前线轨道分布和Fukui指数表明, 6种缓蚀剂分子的反应活性区域均集中在分子的咪唑环上, 3个反应活性中心分别位于咪唑环上的N(4), N(7)和C(8)原子, 可使咪唑环在金属表面形成多中心吸附. 分子的反应活性及活性区域分布对烷基链长并不敏感. 单分子吸附能、膜的内聚能、吸附角和链间距的计算数据显示, 缓蚀剂膜的稳定性以及膜与金属基体的结合强度随链长的增加而增大; 当正构烷基碳链长度大于13时, 缓蚀剂可在金属表面形成一层高覆盖度、致密的疏水膜, 能有效阻碍溶液中的腐蚀介质向金属表面扩散, 从而达到阻碍或延缓腐蚀的目的.     

取代烷基侧链长度对二维纳米结构的影响

合成了一系列烷基取代的间苯三酚衍生物,并在大气条件下用扫描隧道显微镜研究了它们在高定向裂解石墨表面的吸附和组装行为.实验结果表明,这些自组装分子具有条状结构特征.在链长较短的分子图像中,两条平行的烷氧基链肩并肩地排列在苯环的一侧,另一条烷氧基链则排列在苯环的另一侧,链与链之间彼此相互交错排列形成均一的烷基条带.当链长增加时,这种高稳定性和密排结构遭到破坏,出现单个分子和分子对共存的组装结构.这是由于烷基链与烷基链之间以及烷基链与基底之间的作用力共同决定的.通过调控分子烷基链的长度可以得到不同的表面二维纳米结构.     

多糖类大分子与表面活性剂相互作用的研究进展

多糖类大分子具有天然、无毒、使用安全和可再生及来源丰富等优点. 将多糖类大分子与表面活性剂复配使用, 不仅可利用各自的优势和特性, 而且能发挥二者的协同作用, 大大改善二者的性能. 由于两者之间存在诸如静电作用、疏水作用、偶极相互作用、氢键作用、空间位阻效应等, 水体系中表面活性剂在多糖分子链上的缔合得到调控, 并引起表面活性剂的临界聚集浓度(cac)、临界胶束浓度(cmc)、结合量, 以及体系的表面吸附、界面流变性等呈现各种变化. 本文简要总结了近年来多糖类大分子与表面活性剂复配体系研究方面取得的一些进展, 述及复配体系研究中所采用的方法与手段, 主要讨论复配体系的物理化学性质以及多糖类大分子与表面活性剂相互作用的机制.     

甘草多糖螺旋结构的原子力显微镜研究

用原子力显微镜(AFM)对甘草多糖的微观结构进行观察, 实验结果表明, 甘草多糖主要由葡萄糖、阿拉伯糖和半乳糖组成. 甘草多糖分子的稀溶液铺展在Ni^2＋处理的云母片上, 经干燥, 乙醇固定后, 获得稳定、重复的图像. 甘草多糖分子具有高度分枝的结构, 并且糖链间形成环状、柱状或近似于螺旋状的结构. 甘草多糖链呈多股紧密的螺旋结构, 这种现象可能与该多糖中分子间的Van der Waals相互作用以及糖链间氢键缔合有关.     

Gemini表面活性剂对疏水缔合聚丙烯酰胺界面吸附膜扩张流变性质的影响

采用小幅低频振荡和界面张力弛豫技术, 考察了疏水缔合水溶性聚丙烯酰胺(HMPAM)在正癸烷-水界面上的扩张黏弹性质, 研究了不对称Gemini表面活性剂C₁₂COONa-p-C₉SO₃Na对其界面扩张性质的影响. 研究发现, 疏水链段的存在, 使HMPAM在界面层中具有较快的弛豫过程, 扩张弹性显示出明显的频率依赖性. 表面活性剂分子可以通过疏水相互作用与聚合物的疏水嵌段在界面上形成类似于混合胶束的特殊聚集体. 表面活性剂分子与界面聚集体之间存在快速交换过程, 可以大大降低聚合物的扩张弹性. 同时, 聚合物分子链能够削弱表面活性剂分子长烷基链之间的强相互作用, 导致混合吸附膜的扩张弹性远低于单独表面活性剂吸附膜.     

Rheological Properties and Crosslinking Rheo-Kinetics of CMHEC/CTAB Synergistic Systems

Aiming at synergistic interaction between carboxymethyl hydroxyethyl cellulose (CMHEC) and cetyltrimethyl ammonium bromide (CTAB), mixtures of CMHEC and CTAB solutions were investigated, employing relative viscosity and rheological measurements. The effects of mass ratio of CMHEC and CTAB solutions, temperature, and polysaccharide concentration on relative viscosities of CMHEC/CTAB systems were studied. Rheological method was used to study rheo-kinetics of the isothermal crosslinking process for CMHEC/CTAB synergistic fracturing fluid, and the novel crosslinking rheo-kinetics equation was established. The results showed the strong synergism between CMHEC and CTAB, resulting in a higher relative viscosity, storage modulus G′, and loss modulus G″ than that of separate ones. CMHEC/CTAB systems behave as pseudoplastic fluids with considerable thixotropy and viscoelasticity, and the flow behavior can be well described by Carreau?Williamson model. The crosslinking rheo-kinetics equation can well describe the isothermal crosslinking process at different shear rates. The model parameters are well-defined and reasonable.     

Mixed solutions of an associating polymer with a cleavable surfactant

Mixtures of hydrophobically modified hydroxyethyl cellulose (HMHEC) and alkali-sensitive cleavable betaine ester surfactants have been studied by viscometry, 1H NMR, absorbance measurements, and birefringence determinations. Before the hydrolysis, the surfactants behaved as conventional nondegradable surfactants in terms of the effect on the viscosity of increasing surfactant concentration. As the surfactants were hydrolyzed, systems with time-dependent viscosity were obtained. The viscosity either decreased monotonically or went through a maximum as a function of time, depending on the initial surfactant concentration. Different surfactant chain lengths gave rise to different viscosity profiles. The rate of hydrolysis, and thus the time-dependency of the surfactant concentration, could be controlled by changing the pH of the solution.     

Effect of carboxymethyl cellulose and ionic strength on stability of mineral suspensions in potash ore flotation systems

The adsorption of sodium carboxymethyl cellulose from aqueous solutions varying in ionic strength from that of distilled water to 50% NaCl/KCl brine (about 3.5 mol/dm(3)) onto illite and dolomite has been studied. The purpose of this work was to investigate the solvency effects in the phenomena underlying the potash flotation process that is carried out in saturated brine. Based on viscosity measurements, the adsorption results were analyzed in terms of a simple model of polymer macromolecules in solution. Suspension stability measurements carried out concomitantly with adsorption tests showed the ranges of carboxymethyl cellulose concentration over which the tested suspensions either were aggregated or were restabilized.     

Effect of catalyst systems and reaction conditions on the synthesis of cellulose‐g‐PDMAam copolymers by controlled radical polymerization

Various copper‐based catalyst systems and reaction conditions were studied in the graft copolymerization of N,N‐dimethylacrylamide (DMAam) with a cellulose‐based macroinitiator by controlled radical polymerization. The cellulose macroinitiator with degree of substitution DS = 0.44 was synthesized from dissolving softwood pulp in a LiCl/DMAc solution. The graft copolymerizations of DMAam, using the cellulose macroinitiator and various copper‐based catalyst systems, were then carried out in DMSO solutions. The copolymerization kinetics was followed by ¹H NMR. Water‐soluble cellulose‐g‐PDMAam copolymers were comprehensively characterized by ATR‐FTIR and ¹H NMR spectroscopies and SEC analyses. DLS and steady‐shear viscosity measurements revealed that when the DP_graft of the cellulose‐g‐PDMAam copolymer is high enough, the copolymer forms a more compact structure in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Phase behavior and structure of liquid crystalline solutions of cellulose derivatives

Summary Structural and thermodynamic characteristics of liquid-crystalline solutions of four cellulose derivatives in a range of solvents were studied. Basic observations were made on these systems using polarized light microscopy, small angle light scattering, dilute solution and concentrated solution viscosities. The polymers studied include hydroxypropyl cellulose (HPC), cellulose acetate butyrate (CAB), ethyl cellulose (EC), and cellulose triacetate (CT). The formation of the liquid crystalline phase was shown to strongly depend on polymer concentration, solvent type and temperature. The critical volume fraction of polymer required to form the liquid crystal phase varied significantly as the solvent changed. The critical volume fraction decreased with increasing solvent acidity and polymer intrinsic viscosity in a given solvent. The breadth of the two phase region seems to decrease with increasing acidity. The liquid crystalline phase was in most cases determined to be cholesteric. In all cases positively birefringent cellulose derivatives form negative spherulitic domains. In one case, the negativity birefringent system (cellulose triacetate) formed positively birefringent spherulitic liquid crystalline domains. This is interpreted to mean the structure organizes itself by a tangential alignment of polymer chains within the domain. SALS measurements appear to detect domains and in some cases cholesteristic pitch.With 5 figures and 4 tables     

NaCMC与甲基丙烯酰氧乙基二甲基辛基溴化铵及AM接枝共聚物的性能

水溶性增粘剂;增粘性能;协同增效作用;疏水缔合作用;剪切作用;NaCMC与甲基丙烯酰氧乙基二甲基辛基溴化铵及AM接枝共聚物的性能     

Cyclic voltammetry and viscosity measurements of aggregated assemblies of anionic surfactants with nonionic surfactants and triblock copolymers

Cyclic voltammetry (CV) and viscosity measurements have been employed to study the aggregation behavior of mixed micellar systems of anionic surfactant (dioctyl sulfosuccinate sodium salt, AOT) with conventional nonionic surfactants such as Brij 35/TritonX-100/Tween 20/Tween 80/Myrj 45 and two triblock copolymers (L64 and F68). Critical micelle concentration (cmc) values have been determined for various micellar systems from CV measurements using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Diffusion coefficient (D) has been evaluated from Randles–Sevcik equation which showed an overall decrease for most of the binary systems. The negative values of interaction parameters (β) obtained from regular solution theory suggest the synergistic behavior in all the binary systems except AOT + Tween 80 mixtures. The mixed systems of AOT with triblock copolymers showed stronger synergistic interactions than that of mixed systems of AOT with nonionic surfactants. A comparative evaluation of mixed systems of anionic surfactants AOT and sodium dodecyl sulfate with Myrj 45 and AOT + L64 and F68 has been made on the basis of different micellar parameters and structural properties of surfactants. Viscosity measurements also show similar type of interactions in the mixed micelles.     

Rheology of nanofibrillated cellulose/acrylate systems for coating applications

In this work, the suitability of nanofibrillated cellulose (NFC) as a novel component for wood coatings has been evaluated. NFC was prepared from two different wood pulps with a high pressure homogeniser and a grinder, depending on the initial fibre size of the two pulps. The fibrillation process was monitored using viscosity measurements and scanning electron microscopy. Viscosity measurements were found to be a suitable, reliable and especially fast and easy method for process monitoring, optimization and quality assessment of the NFC fibrillation process. NFC was mixed with four different waterborne acrylic polymer emulsions and analysed regarding its rheological behaviour. The viscosity of the acrylate–NFC suspensions was dominated by the NFC, whereas the polymer type was of minor importance at the tested concentrations. The viscosity increased exponentially after NFC addition and consequently the viscosity of such suspensions would be precisely adjustable in the considered shear range. During accelerated storage at elevated temperatures, the general flow behaviour did not change; only a slight viscosity increase was observed. The study shows that rheology is an important issue that has to be taken into account when applying NFC as additive in water based coating systems and that NFC is suitable as component for coating applications.     

The structure and rheology of mixed micellar solutions of sodium dodecyl sulfate and dodecyldimethylamine oxide

The paper presents the results of viscosity measurements by capillary and rotational viscometry for aqueous solutions of sodium dodecyl sulfate and dodecyldimethylamine oxide and data on the hydrodynamic radii of aggregates obtained from dynamic light scattering measurements. A wide range of solution compositions predominantly containing dodecyldimethylamine oxide was studied at 308.15 K; the total content of surfactants was from 1 to 15 wt %, pH ～ 8. Solution viscosities were found to change by several orders of magnitude when the composition of the system was varied; the dependence of viscosity on the ratio of surfactants passes through maximum and inflections. The dependences of viscosity and hydrodynamic radii on the ratio between two surfactants were similar in character. The conclusion was drawn that various nanostructural rearrangements occurred in the solutions studied and synergistic effects were observed.     

Celluloses in an ionic liquid: the rheological properties of the solutions spanning the dilute and semidilute regimes

The ionic liquid of 1-allyl-3-methylimidazolium chloride ([amim]Cl) was used as the good solvent to dissolve celluloses. Cellulose concentration covers the range of 0.1-3.0 wt %, spanning both the dilute and semidilute regimes. The rheological properties of the cellulose ionic liquid solutions have been investigated by steady shear and oscillatory shear measurements in this study. In the steady shear measurements, all the cellulose solutions show a shear thinning behavior at high shear rates; however, the dilute cellulose solutions show another shear thinning region at low shear rates, which may reflect the characteristics of the [amim]Cl solvent. In the oscillatory shear measurements, for the dilute regime, the reduced dimensionless moduli are obtained by extrapolation of the viscoelastic measurements for the dilute solutions to infinite dilution. The frequency dependences of the reduced dimensionless moduli are intermediate between the predictions from the Zimm model and elongated rodlike model theories, while the fitting by using a hybrid model combining these two model theories agrees well with the experimental results. For the semidilute regime, the frequency dependences of moduli change from the Zimm-like behavior to the Rouse-like behavior with increasing cellulose concentration. In the studied concentration range, the effects of molecular weight and temperature on solution viscoelasticities and the relationship between steady shear viscosity and dynamic shear viscosity are presented. Results show that the solution viscoelasticity greatly depends on the molecular weight of cellulose; the empirical time-temperature superposition principle holds true at the experimental temperatures, while the Cox-Merz rule fails for the solutions investigated in this study.