Origin of giant dielectric constant in Ba[(Fe1−xCox)1/2Nb1/2]O3

The X-ray diffraction Rietveld refinement of Ba[(Fe_1−xCo_x)_1/2Nb_1/2]O₃ with 0 ≤ X ≤ 1 shows cubic structure formation with space group P_m3_m. No distinct tilting of oxygen octahedron is observed. The dielectric measurement of such a cubic system exhibited giant values (?′ > 10⁴) in the temperature range of 298-483 K and frequency range of 10²-10⁵ Hz. An analysis of the permittivity, electric modulus, and electrical conductivity properties in these systems confirmed the presence of oxygen vacancies induced dipolar relaxation. Our investigations show that the observed extremely high dielectric constant values are predominantly the result of oxygen vacancies induced dipoles produced at the grain boundaries. Additional significant intrinsic contributions to the permittivity comes from the directly doped electrons at the unit cell, as indicated by the enhancement in the observed values of the permittivity on replacement of Fe³⁺ (3d⁵) by Co³⁺ (3d⁶). The contributions of the doped free charges and the oxygen vacancy induced dipoles are separated using the Jump Relaxation Model.     

Structure and thermal behavior of multicomponent Fe68−xNixZr15Nb5B12 (x = 5, 10, 15, 20) alloys

Multicomponent Fe_68−xNi_xZr₁₅Nb₅B₁₂ (x = 5, 10, 15, 20) alloy powders milled for 60 h were prepared by mechanical alloying (MA). The structure and crystallization behavior were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential thermal analysis (DTA). Ni enhances the amorphisation of alloy powders. Particle size increases with increasing Ni content. Both onset crystallization temperature T_x and the first crystallization peak temperature T_p of the four alloys shift to a higher temperature with increasing heating rate while melting temperature (T_m) is just the opposite. Fe_68−xNi_xZr₁₅Nb₅B₁₂ (x = 5, 10, 15, 20) alloys all have a large supercooled liquid region ΔT_x. The supercooled liquid region ΔT_x increases and the crystallization activation energy E decreases with increasing Ni content.     

Anisotropy compensation and high low-field magnetostriction of epoxy/Tb1−xHox(Fe0.8Co0.2)2 composites (0.60 ≤ x ≤ 1.0)

The anisotropy compensation and magnetostrictive properties of Tb_1−xHo_x(Fe_0.8Co_0.2)₂ (0.60 ≤ x ≤ 1.0) alloys have been investigated. The easy magnetization direction (EMD) at room temperature rotates from the 〈1 1 1〉 axis (x ≤ 0.75) to the 〈1 0 0〉 axis (x ≥ 0.90) through an intermediate state 〈1 1 0〉, subjected to the anisotropy compensation between Tb³⁺ and Ho³⁺ ions. Composition anisotropy compensation is realized near x = 0.75. The Tb_0.25Ho_0.75(Fe_0.8Co_0.2)₂ alloy has a minimum anisotropy and a large spontaneous magnetostriction coefficient λ₁₁₁ (≈740 ppm) at room temperature. The strong 〈1 1 1〉-oriented 1-3 epoxy-bonded composite has been fabricated by curing under a moderate magnetic field. A high low-field magnetostriction of about 400 ppm at 3 kOe is obtained for the 1-3 epoxy/Tb_0.25Ho_0.75(Fe_0.8Co_0.2)₂ composite with 40-vol% alloy particles, which can be attributed to the low magnetic anisotropy, EMD lying along 〈1 1 1〉 direction, the strong 〈1 1 1〉-textured orientation and the chain structure.     

Phase, structural, and magnetocaloric properties of high temperature annealed LaFe11.6Si1.4BX

The phase relation, microstructural, hysteresis, Curie temperature, and magnetocaloric effects of LaFe_11.6Si_1.4B_x (x = 0.1, 0.2, 0.3, 0.4, and 0.5) prepared by arc-melting and then annealed at 1373 K (1.5 h) + 1523 K (5 h) were investigated. It was found that the main phase is NaZn₁₃-type phase, the impurity phases include α-Fe, Fe₂B, and small amount of La₅Si₃. The boron atom can dissolve into the crystal lattice of LaFe_11.6Si_1.4B_x to form interstitial solid solution, but the content of solid solution is not up to x = 0.5. For LaFe_11.6Si_1.4B_x (x = 0.1, 0.3, and 0.5) compounds, the Curie temperature T_C increases from 190.6 to 198.3 K with the increasing of B content from x = 0.1 to 0.5. The first order magnetic transition behavior becomes weaker and magnetic entropy change ΔS_M (T, H) drops with the increasing of B content, respectively. However, ΔS_M (T, H) still remains a large value, 11.18 J/kg K, when x reaches to 0.5 at 0-2 T. An attractive feature is that both thermal and magnetic hysteresis can be reduced remarkably by introducing B. The maximum magnetic hysteresis loss near T_C drops from 22.52 to 4.95 J/kg when the content of B increases from x = 0.1 to 0.5.     

Magnetocaloric effect in the Ce2Fe17−xMnx helical magnets

The Ce₂Fe_17−xMn_x (x = 0-2) compounds demonstrate a complex temperature dependence of the magnetocaloric effect MCE, which is inverse in a narrow temperature interval just below Néel temperature T_N and normal at higher or lower temperatures. The normal MCE exhibits two peaks in the vicinity of temperatures of ferromagnetic ordering Θ_T and T_N for compositions x = 0-0.35, 1.3-2 or one peak near T_N for antiferromagnets with x = 0.5-1. The maximal change of the peak entropy −S_M is about 3 J/kg K in a field of 5 T for the compounds with x = 0-0.5 at T ∼230 K close to T_N. The drastic decrease of the MCE, by half, in the Ce₂Fe_17−xMn_x system is traceable to a decrease of the spontaneous magnetization and the helical type of magnetic states in the compounds.     

Substitution effect on metal-insulator transition in Cu(Ir1−xMx)2S4 (M = Sn, Hf)

A spinel CuIr₂S₄ exhibits a temperature-induced metal-insulator (M-I) transition at around 226 K. Non-magnetic substitution effect on the M-I transition, T_M-I, in Cu(Ir_1−xM_x)₂S₄ (M = Sn, Hf) has been studied on the focus of the rather low composition region of x. Magnetic property of Cu(Ir_1−xM_x)₂S₄ (M = Sn, Hf) has been examined experimentally. The T_M-I decreases with increasing x and the temperature hysteresis becomes unclear within the experimental errors. The step anomaly in the magnetic susceptibility smears out and the T_M-I becomes ill defined around x = 0.20 in Cu(Ir_1−xSn_x)₂S₄, and x = 0.10 in Cu(Ir_1−xHf_x)₂S₄, respectively. These substitutions play an important role in decoupling the spin-dimerization of Ir⁴⁺-Ir⁴⁺ in CuIr₂S₄, and lead the destruction of the metal-insulator transition.     

The studies of phase relation, microstructure, magnetic transition, magnetocaloric effect in (Gd1−xErx)5Si1.7Ge2.3 compounds

The phase relation, microstructure, Curie temperatures (T_C), magnetic transition, and magnetocaloric effect of (Gd_1−xEr_x)₅Si_1.7Ge_2.3 (x = 0, 0.05, 0.1, 0.15, and 0.2) compounds prepared by arc-melting and then annealing at 1523 K (3 h) using purity Gd (99.9 wt.%) are investigated. The results of XRD patterns and SEM show that the main phases in those samples are mono-clinic Gd₅Si₂Ge₂ type structure. With increase of Er content from x = 0 to 0.2, the values of magnetic transition temperatures (T_C) decrease linearly from 228.7 K to 135.3 K. But the (Gd_1−xEr_x)₅Si_1.7Ge_2.3 compounds display large magnetic entropy near their transition temperatures in a magnetic field of 0-2 T. The maximum magnetic entropy change in (Gd_1−xEr_x)₅Si_1.7Ge_2.3 compounds are 24.56, 14.56, 16.84, 14.20, and 13.22 J/kg K⁻¹ with x = 0, 0.05, 0.1, 0.15, and 0.2, respectively.     

Piezoelectric and dielectric properties of Dy2O3-doped (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics

(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ + x wt% Dy₂O₃ with x = 0-0.3 ceramics were synthesized by conventional solid-state processes. The effects of Dy₂O₃ on the microstructure, the piezoelectric and dielectric properties were investigated. X-ray diffraction pattern confirmed that the coexistence of tetragonal and rhombohedral phases in the (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ composition was not changed by adding 0.05-0.3 wt% Dy₂O₃. SEM images indicate that all the ceramics have pore-free microstructures with high density, and that doping of Dy₂O₃ inhibits the grain growth of the ceramics. The addition of Dy₂O₃ shows the double effects on decreasing the piezoelectric and dielectric properties for 0 < x < 0.15 when Dy³⁺ ions substitute B-site Ti⁴⁺ ions, and increasing the properties for 0.15 < x < 0.3 when Dy³⁺ ions enters into A-site of the perovskite structure. The optimum electric properties of piezoelectric constant d₃₃ = 170 pC/N and the dielectric constant ?_r = 1900 (at a frequency of 1 kHz) are obtained at x = 0.3.     

Synthesis and characterization of MWCNTs/Co1−xZnxFe2O4 magnetic nanocomposites and their use in hydrogels

A novel magnetic nanocomposite of multiwalled carbon nanotubes (MWCNTs) decorated with Co_1−xZn_xFe₂O₄ nanocrystals was synthesized successfully by an effective solvothermal method. The as-prepared MWCNTs/Co_1−xZn_xFe₂O₄ magnetic nanocomposite was used for the functionalization of P/H hydrogels as a prototype of device to show the potential application of the nanocomposites. The nanocomposites were characterized by X-ray diffraction analysis, transmission electron microscopy and vibrating sample magnetometer. The results show that the saturation magnetization of the MWCNTs/Co_1−xZn_xFe₂O₄ magnetic nanocomposites increases with x when the Zn²⁺ content is less than 0.5, but decreases rapidly when the Zn²⁺ content is more than 0.5. The saturation magnetization as a function of Zn²⁺ substitution reaches a maximum value of 57.5 emu g⁻¹ for x = 0.5. The probable synthesis mechanism of these nanocomposites was described based on the experimental results.     

Nanocrystalline Fe1−xCoxSn2 solid solutions prepared by reduction of salts in tetraethylene glycol

In an effort to improve the electrochemical performance of tin intermetallic phases as electrode active material for lithium-ion batteries, Fe_1−xCo_xSn₂ solid solutions with x = 0.0, 0.25, 0.3, 0.5, 0.6 and 0.8 were prepared by chemical reduction in tetraethylene glycol. Precise control of the synthesis conditions allowed single-phase nanocrystalline materials to be prepared, with particle diameters of about 20 nm and cubic, nanorods, and U-shaped morphologies. The substitution of iron by cobalt induced a contraction of the unit cell volume. The hyperfine parameters of the ⁵⁷Fe Mössbauer spectra were sensitive to the Co/Fe substitution and revealed a superparamagnetic behaviour. In lithium cells nanocrystalline Fe_1−xCo_xSn₂ active materials delivered reversible capacities above 500 mAh g⁻¹ that depended on the composition and cycling conditions. The intermediate compositions exhibit better electrochemical performance than the end compositions CoSn₂ and FeSn₂.     

Effect of Ca on the microstructure and magnetocaloric effects in the La1−xCaxFe11.5Si1.5 compounds

The effect of Ca on the microstructure and magnetocaloric effects has been investigated in the La_1−xCa_xFe_11.5Si_1.5 (x = 0, 0.1, 0.2 and 0.3) compounds. The introduction of Ca leads to the appearance of minor α-Fe and Ca-rich phases, which affects the actual compositions of the main phases for the Ca containing samples. With increasing the Ca concentration, the Curie temperature T_C increases from 183 to 208 K, and the maximum magnetic entropy changes |ΔS| at the respective T_C with a magnetic field change from 0 to 5 T are 21.3, 19.5, 16.9, and 11.2 J/kg K for x = 0, 0.1, 0.2, and 0.3, respectively. The nature of the magnetic transition changes from first-order to second-order with an increase in Ca concentration, which leads to a reduction of the hysteresis and a decrease of the magnetic entropy change. However, the relative cooling power for La_1−xCa_xFe_11.5Si_1.5 compounds remains comparable with or even larger than that of other magnetocaloric materials over a wide temperature range. The higher T_C and the smaller hysteresis in comparison with those of the parent compound suggest that the La_1−xCa_xFe_11.5Si_1.5 compounds could be suitable candidates for magnetic refrigerants in the corresponding temperature range.     

Influence of partial substitution of Ge on crystallization kinetics, microstructure and magnetic property of Fe44Co44−xZr7B5Gex alloys

Partial substitution of Ge for Co in Fe₄₄Co₄₄Zr₇B₅ amorphous alloy is found to have a large influence on crystallization kinetics and magnetic property of the alloy. Activation energy of nanocrystallization of FeCo phase (primary crystallization) decreases by 90 kJ/mol with 4 at.% Ge substitution, while that of precipitations of Zr-type phase from a residual amorphous phase (secondary crystallization) increases by 106 kJ/mol. The suppression of the secondary crystallizations stabilizes the FeCo nanocrystals embedded in the residual amorphous phase for the Fe₄₄Co_44−xZr₇B₅Ge_x until higher temperatures. It is proposed that the stabilization mechanism is attributed to preferential partitioning of Ge in the residual amorphous phase revealed by scanning transmission electron microscopy analysis. Microstructure and coercivity for the annealed alloys are also presented in combination with the effect of the Ge substitutions.     

Studies on the power factor of (Ba,Sr)Co2+xRu4−xO11 compounds

We have prepared polycrystalline single-phase ACo_2+xRu_4−xO₁₁ (A = Sr, Ba; 0 ≤ x ≤ 0.5) using the ceramic method and we have studied their structure, electrical resistivity and Seebeck coefficient, in order to estimate their power factor (P.F.). These layered compounds show values of electrical resistivity of the order of 10⁻⁵ Ωm and their Seebeck coefficients are positive and range from 1 μV K⁻¹ (T = 100 K) to 20 μV K⁻¹ (T = 450 K). The maximum power factor at room temperature is displayed by BaCo₂Ru₄O₁₁ (P.F.: 0.20 μW K⁻² cm⁻¹), value that is comparable to that shown by compounds such as SrRuO₃ and Sr₆Co₅O₁₅.     

The Mn-doping effect on the charge ordering state of La1/3Sr2/3FeO3

The longitudinal ultrasonic velocity (V_l), as well as resistivity has been measured in single-phase polycrystalline La_1/3Sr_2/3Fe_1−xMn_xO₃ (x = 0, 0.025, 0.05) at a frequency of 10 MHz, from 20 K to 300 K. It is found that with increasing Mn-doping level, the resistivity increases and the charge ordering transition temperature T_CO shifts to lower temperature. For all samples, upon cooling down from 300 K, a substantial softening in V_l above T_CO and dramatic stiffening below T_CO are observed. This abnormal elastic softening above T_CO can be described well by the mean-field theory, which indicates that this feature is due to the electron-phonon coupling via the Jahn-Teller effect and this coupling is enhanced with the Mn doping. Below T_CO, another softening in V_l is observed for x = 0, and weakens with the increasing of Mn content. This character is attributed to the breathing-type distortion of Fe-O octahedron and suggests that the charge disproportionation (CD) transition is suppressed by the Mn substitution.     

High temperature thermoelectric properties and energy transfer devices of Ca3Co4−xAgxO9 and Ca1−ySmyMnO3

The high temperature oxide thermoelectric materials of p-type Ca₃Co_4−xAg_xO₉ (denoted as p-Co349/Ag_x) and n-type Ca_1−ySm_yMnO₃ (denoted as n-Mn113/Sm_y) were prepared by the self-ignition method combined with a sintering technique. The influence of doping Ag and Sm on the thermoelectric properties of the corresponding materials was evaluated. The figures of merit, ZT, for the p-Co349/Ag_0.2 and n-Mn113/Sm_0.02 materials reached maxima of 0.20 and 0.15 at 973 K, respectively. The performances of thermoelectric devices constructed with the p- and n-type pairs were evaluated in terms of the maximum output power (P_max) and manufacturing factor. The P_max and volume power density for the four-leg devices reached 36.8 mW and 81.9 mW cm⁻³ at ΔT of 523 K, respectively.     

Superconductors of SmFe1−xCoxAsO synthesized by mechanical alloying

The SmFe_1−xCo_xAsO (x = 0 − 0.25) superconductors were synthesized by mechanical alloying (MA) and rapid sintering method with Co atoms doped into FeAs layers to replace the Fe sites. The phase purity and superconducting properties of the samples were characterized by X-ray diffraction, electrical resistivity, magnetic susceptibility and Hall coefficient. All the samples belong to the tetragonal ZrCuSiAs structure type with the grain size in 1-3 μm. The superconducting critical temperature T_c of SmFe_0.9Co_0.1AsO was 12.5 K, and the structure/SDW transition was suppressed by Co doping. The negative Hall coefficient of SmFe_0.9Co_0.1AsO indicated the electron conduction in the sample. The charge carrier density is about 2 × 10²⁰ cm⁻³ at the temperature lower than 150 K, larger than that of SmFeAsO.     

Luminescent properties of Na3Gd1−xEux(PO4)2 and energy transfer in these phosphors

A series of Eu³⁺ activated Na₃Gd_1−xEu_x(PO₄)₂ (0 ≤ x ≤ 1) phosphors were synthesized by solid-state reaction method. The structures and photo-luminescent properties of these phosphors were investigated at room temperature. The results of XRD patterns indicate that these phosphors are isotypic to the orthorhombic Na₃Gd(PO₄)₂. The excitation spectra indicate that these phosphors can be effectively excited by near UV (370-410 nm) light. The intensities of magnetic dipole transition ⁵D₀ → ⁷F₁ and forced electric dipole transition ⁵D₀ → ⁷F₂ are comparable, and the energy ratio (⁵D₀ → ⁷F₁/⁵D₀ → ⁷F₂) is 1.1. The emission spectra exhibit strong reddish orange performance (CIE chromaticity coordinates: x = 0.62, y = 0.38), which is due to the ⁵D₀ → ⁷F_J transitions of Eu³⁺ ions. The correlation between the structure and the photo-luminescent properties of the phosphors was studied. The energy transfer and concentration quenching of the phosphors were discussed. Na₃Gd_1−xEu_x(PO₄)₂ has a potential application for white light-emitting diodes.     

Dielectric and magnetic behavior of BaCd2−xSrxFe16O27 W-type hexagonal ferrites

We have prepared BaCd_2−xSr_xFe₁₆O₂₇ (x = 0, 0.5, 1, 1.5 and 2.0) W-type hexagonal ferrites by standard ceramic method. In this work, the structural, dielectric and magnetic properties have been studied of the prepared samples. The XRD analysis of the samples reveals single phase behavior sintered at 1400 °C for 6 h. The saturation magnetization (M_s) shows increasing behavior with the increasing concentration of Sr²⁺. While the coercivity (H_c) decreases rapidly up to 409 G for x = 1.5 and then increases for (x > 1.5) due to the preference of Cd²⁺ for tetrahedral sites and the number of spin-down magnetic ions. The real and imaginary parts of the dielectric constant (?′,?″) and dielectric loss tangent (tan δ) are determined in the frequency range 0.1-10⁷ Hz. It is observed that both the real and imaginary parts of the dielectric constant and tan δ decrease with the increasing concentration of Sr²⁺, which is due to the contribution of Cd²⁺ ions in addition to Fe³⁺ and Fe²⁺ ions to interfacial polarization.     

Low temperature sintering and microwave dielectric properties of (Mg0.7Zn0.3)0.95Co0.05TiO3 ceramics with BaCu(B2O5) additions

The effects of BaCu(B₂O₅) additives on the sintering temperature and microwave dielectric properties of (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics were investigated. The (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics were not able to be sintered below 1000 °C. However, when BaCu(B₂O₅) were added, they were sintered below 1000 °C and had the good microwave dielectric properties. It was suggested that a liquid phase with the composition of BaCu(B₂O₅) was formed during the sintering and assisted the densification of the (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics at low temperature. BaCu(B₂O₅) powders were produced and used to reduce the sintering temperature of the (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics. Good microwave dielectric properties of Q × f = 35,000 GHz, ?_r = 18.5.0 and τ_f = −51 ppm/°C were obtained for the (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics containing 7 wt.% mol% BaCu(B₂O₅) sintered at 950 °C for 4 h.