共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
文章介绍了目前玻璃工厂电气新技术应用的范围和现状,重点分析了一些新技术应用的利弊和效果,展望了未来电气新技术在玻璃工厂应用的方向和趋势。 相似文献
3.
随着计算机技术的发展,自动化技术在电子信息工程设计中得到了广泛的应用。对自动化技术在电子信息工程设计中的应用进行了概述,重点介绍了在电路设计和系统设计中的自动化技术应用,并分析了自动化技术在电子信息工程设计中的优点和挑战。此外,通过实际案例分析,阐述了自动化技术在电子信息工程设计中的应用效果和实际应用价值。 相似文献
4.
5.
6.
数据驱动方法在流程工业中的应用命题综述 总被引:1,自引:1,他引:0
相对于具体技术方案,数据驱动方法在工业应用取得成功首先取决于应用命题本身.从流程工业应用的角度,对涉及数据驱动方法的应用命题进行了提炼和分类,并用典型的例子和文献将这些类别的应用命题具体化,包括应用命题背景、目标的简单描述和数据驱动方法在解决这些命题时所担负的角色.同时,还对数据驱动方法的流程工业应用研究做了展望,提出了数据完备性问题. 相似文献
7.
8.
9.
随着科技的不断发展,数字化测绘技术在各行各业的应用越来越广泛,煤矿地质测量中,数字化测绘技术得到了广泛的应用,极大地提高了地质勘查和开采效率,同时也降低了勘查成本和风险。本文将探讨数字化测绘技术在煤矿地质测量中的应用优势和应用要点。 相似文献
10.
11.
12.
为精确表征六烯丙基六氮杂异伍兹烷(HAIW)的化学结构,在氘代氯仿(CDCl3)及氘代丙酮(acetone-d6)中研究了HAIW的核磁谱图特征。采用一维及二维1 H、13 C、15 N NMR技术对HAIW的NMR信号进行了全归属,利用核磁模拟软件NMR-SIM对氢谱图进行计算机拟合。结果表明,HAIW在丙酮溶液中的1 H NMR的分辨率较好,谱图中存在两类异伍兹烷信号(环内与桥头)及两类烯丙基碳氢信号,其中五元环所连4个烯丙基不能自由旋转导致亚甲基氢不对称出现2组峰,而六元环所连2个烯丙基则能自由旋转使得该亚甲基氢对称重合;两类烯丙基存在的多种偶合使得氢谱谱线较为复杂;由拟合氢谱化学位移及偶合常数获得的1 H NMR谱图与实际图谱完全一致。表明二维核磁共振技术与核磁模拟技术相结合,可用于对复杂谱的精确分析。 相似文献
13.
14.
聚合物—表面活性剂复合体系的核磁共振研究 总被引:2,自引:0,他引:2
用核磁共振(NMR)研究聚合物-表面活性剂复合体系的具体实例,分别对用于聚合物与表面活性剂相互作用及聚合物-表面活性剂团族结构剖析等领域的^13C-NMR、^13C-及反离子^23Na^ -弛豫、顺磁共振驰豫(PR-NMR)、二维核子Overhauser增强核磁共振(2D-NOESY-NMR)等手段作了详尽的概述,在^13C-NMR研究中发现PVP-C12BE体系台PVP骨架上α-CH、β-CH2和吡咯环上与N相连的亚甲基吸附在C^12BE胶束表面的碳氢链部位,其相互作用驱动力为疏水力。^13CNMR、^23Na^ -NMR研究表明在PEG-SDS团族结构中大部分PEG链节环绕在SDS胶束周围,少部分PEG链节吸附在烃/水界面上;2D-NOESY-NMR研究结果表明,有少部分PEG链节渗入到SDS胶束内部;PR-NMR结果显示少部分PEG链节存在于SDS胶束双电层内,PEG-SDS团族的化学计量组成为PEG/SDS=1.9。^13C-NMR研究表明PVP-AS团族为项链状结构,PVP-AS团族为项链状结构,PVP-SDS团族为膨胀笼状结构。 相似文献
15.
16.
29 Si固体核磁共振技术是目前研究水泥基材料定量分析的有效工具之一,在水泥化学领域应用广泛.从现代分析测试技术入手,突出了29 Si固体核磁共振技术在水泥化学中的优势,并结合29 Si固体核磁共振定量分析技术和数据,从硅酸盐水泥熟料矿物组分、硅酸盐水泥水化过程量化表征及硅灰掺入的其他水泥基材料的定量分析等方面综述了29 Si固体核磁共振技术在水泥基材料定量分析中的应用,总结了29 Si固体核磁共振技术在水泥基材料领域定量分析存在的问题并展望了核磁共振技术在水泥基材料领域的发展趋势. 相似文献
17.
介绍了核磁共振(NMR)测试技术进展,着重介绍固体高分辨核磁共振和二维核磁共振技术的进展及它们在高分子材料领域的主要应用举例。 相似文献
18.
W. D. Pohle J. R. Taylor R. L. Gregory 《Journal of the American Oil Chemists' Society》1965,42(12):1075-1078
The percent solids values of fats and shortenings using nuclear magnetic resonance (NMR) and solid fat index (SFI) have been
compared. The samples used were: blends of hard fat and safflower oil, safflower oil hydrogenated to varying degrees, and
different types of shortenings.
This investigation demonstrated the empirical nature of the SFI technique and shows the nature of the deviations from the
solids content determined by the NMR method. The magnitude of the deviation of SFI from the NMR solids content increased with
the level of the solids. The SFI values and the NMR solids content were similar at the lower levels (SFI values of 10) but
at the upper limit for the SFI method (SFI values of 50) the solids content by the NMR method can be 80% or more, a difference
of 30 units.
Although the determination of solids content by NMR is reliable, the relationship between SFI values and NMR values for different
types of samples is so variable that the calculation of the SFI value from percent solids by NMR, or percent solids from SFI
values from prediction equations is not very reliable.
Since NMR measures the solids content more accurately than SFI and is applicable over the entire range of solids, 0 to 100%,
it will be very useful in fat and oil research and control. 相似文献
19.
K. J. Packer 《Topics in Catalysis》1996,3(1-2):249-254
The use of NMR to characterise heterogeneous catalytic systems and processes is assessed, critically, in overview. The generally
wide scope and applicability of NMR is placed in the context of the constraints of NMR experimental requirements and the general
goal of studying catalytic systems under conditions relevant to their actual use. In particular, the issues of sensitivity,
resolution and dynamic processes in NMR are considered alongside the aims of surface selectivity, sample environment control
and the desirability of associated characterisation of the catalytic systems by methods complementary to NMR. 相似文献
20.
Fürtig B Richter C Wöhnert J Schwalbe H 《Chembiochem : a European journal of chemical biology》2003,4(10):936-962
NMR spectroscopy is a powerful tool for studying proteins and nucleic acids in solution. This is illustrated by the fact that nearly half of all current RNA structures were determined by using NMR techniques. Information about the structure, dynamics, and interactions with other RNA molecules, proteins, ions, and small ligands can be obtained for RNA molecules up to 100 nucleotides. This review provides insight into the resonance assignment methods that are the first and crucial step of all NMR studies, into the determination of base-pair geometry, into the examination of local and global RNA conformation, and into the detection of interaction sites of RNA. Examples of NMR investigations of RNA are given by using several different RNA molecules to illustrate the information content obtainable by NMR spectroscopy and the applicability of NMR techniques to a wide range of biologically interesting RNA molecules. 相似文献